1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
|
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
/*
* Copyright 2024 NXP
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
#include "imx93.dtsi"
/ {
model = "NXP i.MX93 9x9 Quick Start Board";
compatible = "fsl,imx93-9x9-qsb", "fsl,imx93";
chosen {
stdout-path = &lpuart1;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0 0x10000000>;
linux,cma-default;
};
vdev0vring0: vdev0vring0@a4000000 {
reg = <0 0xa4000000 0 0x8000>;
no-map;
};
vdev0vring1: vdev0vring1@a4008000 {
reg = <0 0xa4008000 0 0x8000>;
no-map;
};
vdev1vring0: vdev1vring0@a4010000 {
reg = <0 0xa4010000 0 0x8000>;
no-map;
};
vdev1vring1: vdev1vring1@a4018000 {
reg = <0 0xa4018000 0 0x8000>;
no-map;
};
rsc_table: rsc-table@2021e000 {
reg = <0 0x2021e000 0 0x1000>;
no-map;
};
vdevbuffer: vdevbuffer@a4020000 {
compatible = "shared-dma-pool";
reg = <0 0xa4020000 0 0x100000>;
no-map;
};
};
reg_vref_1v8: regulator-adc-vref {
compatible = "regulator-fixed";
regulator-name = "VREF_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_rpi_3v3: regulator-rpi {
compatible = "regulator-fixed";
regulator-name = "VDD_RPI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pcal6524 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
off-on-delay-us = <12000>;
};
};
&adc1 {
vref-supply = <®_vref_1v8>;
status = "okay";
};
&cm33 {
mbox-names = "tx", "rx", "rxdb";
mboxes = <&mu1 0 1>,
<&mu1 1 1>,
<&mu1 3 1>;
memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
status = "okay";
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <ðphy1>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <5000000>;
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
eee-broken-1000t;
reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
realtek,clkout-disable;
};
};
};
&lpi2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c1>;
status = "okay";
ptn5110: tcpc@50 {
compatible = "nxp,ptn5110", "tcpci";
reg = <0x50>;
interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
typec1_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "dual";
data-role = "dual";
try-power-role = "sink";
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
PDO_VAR(5000, 20000, 3000)>;
op-sink-microwatt = <15000000>;
self-powered;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
};
};
};
rtc@53 {
compatible = "nxp,pcf2131";
reg = <0x53>;
interrupt-parent = <&pcal6524>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
};
};
&lpi2c2 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c2>;
status = "okay";
pcal6524: gpio@22 {
compatible = "nxp,pcal6524";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcal6524>;
};
pmic@25 {
compatible = "nxp,pca9451a";
reg = <0x25>;
interrupt-parent = <&pcal6524>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
regulators {
buck1: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <2237500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck4: BUCK4{
regulator-name = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5{
regulator-name = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&lpuart1 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&mu1 {
status = "okay";
};
&mu2 {
status = "okay";
};
&usbotg1 {
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
usb-role-switch;
disable-over-current;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
port {
usb1_drd_sw: endpoint {
remote-endpoint = <&typec1_dr_sw>;
};
};
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_usdhc2_vmmc>;
bus-width = <4>;
no-mmc;
status = "okay";
};
&wdog3 {
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e
MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e
MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x58e
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e
MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e
MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e
MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e
>;
};
pinctrl_lpi2c1: lpi2c1grp {
fsl,pins = <
MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
>;
};
pinctrl_lpi2c2: lpi2c2grp {
fsl,pins = <
MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
>;
};
pinctrl_pcal6524: pcal6524grp {
fsl,pins = <
MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e
MX93_PAD_DAP_TDI__LPUART5_RX 0x31e
MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e
MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582
MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382
MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382
MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382
MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e
MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e
MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e
MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e
MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe
MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe
MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe
MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582
MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
};
|
