diff options
author | David Bauer <mail@david-bauer.net> | 2023-03-20 17:27:58 +0100 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2023-03-20 22:21:31 +0100 |
commit | cff40ef1226eeb9900622941c51c9c9c6b0a732f (patch) | |
tree | 69608f99bbd66053bb8904205a6e0f1f5cb0573e | |
parent | ed82189339b8bcecfe709f1ce8f3500fb4aedab1 (diff) | |
download | openwrt-cff40ef1226eeb9900622941c51c9c9c6b0a732f.tar.gz openwrt-cff40ef1226eeb9900622941c51c9c9c6b0a732f.tar.bz2 openwrt-cff40ef1226eeb9900622941c51c9c9c6b0a732f.zip |
mpc85xx: poll PHY status
Disable interrupts for the eth-PHYs, as the interrupts are either not
firing or lost within the stack. Switch to polling the PHY status in the
meantime until a proper fix is implemented.
Ref: https://github.com/openwrt/openwrt/issues/12192
Signed-off-by: David Bauer <mail@david-bauer.net>
-rw-r--r-- | target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts | 4 | ||||
-rw-r--r-- | target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts | 4 |
2 files changed, 4 insertions, 4 deletions
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts index d6a8da84ef..a807403a07 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/hiveap-330.dts @@ -207,12 +207,12 @@ mdio@24000 { phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; + /* interrupts = <3 1 0 0>; */ reg = <0x1>; }; phy1: ethernet-phy@1 { - interrupts = <2 1 0 0>; + /* interrupts = <2 1 0 0>; */ reg = <0x2>; }; }; diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts index bc467f6b2f..684bd72548 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts @@ -144,7 +144,7 @@ mdio@24000 { phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; + /* interrupts = <3 1 0 0>; */ reg = <0x5>; reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; @@ -152,7 +152,7 @@ }; phy2: ethernet-phy@2 { - interrupts = <1 1 0 0>; + /* interrupts = <1 1 0 0>; */ reg = <0x6>; reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; |