diff options
| author | Kyle Hendry <kylehendrydev@gmail.com> | 2025-01-11 11:33:22 -0800 |
|---|---|---|
| committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2025-04-02 19:07:47 +0200 |
| commit | 65b8a978deac05894d1fd20dfe63494f4b43848d (patch) | |
| tree | d4ccaa0b87efef769af076eba05aa61671e7c920 /package/utils/bcm4908img | |
| parent | c01859e4f3b28b414edc62dcb6056593558d9ad0 (diff) | |
| download | openwrt-main.tar.gz openwrt-main.tar.bz2 openwrt-main.zip | |
Specifications:
- SoC: Broadcom BCM63168 dual 400MHz MIPS
- Flash: 128MB NAND ESMT F59L1G81A
- RAM: 128MB DDR3
- Ethernet: 5x 1000M
- Wifi: BCM435F
- 1x USB 2.0 port
- 2x Button
- 11x LED
- Coax HPNA (unsupported)
- RJ11 xDSL (unsupported)
Install instructions:
The booloader will only install signed firmware so the image has to
be manually flashed.
- Set up a TFTP server on 192.168.1.0/24 to serve the initramfs image
- Interrupt the bootloader and run from RAM with
r 192.168.1.100:openwrt-bmips-bcm63268-actiontec_t1200h-initramfs.elf
- On the openwrt console, copy the wfi image using wget/tftp/scp, i.e
scp user@192.168.1.100:~/openwrt/bin/targets/bmips/bcm63268/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin /tmp/
- Erase half the flash partition where openwrt will be installed with
flash_erase -j /dev/mtd1 0 491
- Flash the openwrt image with
nandwrite -p /dev/mtd1 /tmp/openwrt-bmips-bcm63268-actiontec_t1200h-squashfs-cfe.bin
- Reboot
- Interrupt the bootloader again and use the c command to boot from
previous firmware if vendor image is loaded
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
[Minor improvements to DTS file]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'package/utils/bcm4908img')
0 files changed, 0 insertions, 0 deletions