ath79: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space (especially helpful for the tiny devices).

The only script remaining in parent base-files is
/etc/hotplug.d/ieee80211/00-wifi-migration, everything else is
moved/split.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (generic)   49135 B
split (generic)    48533 B (- 0.6 kiB)
split (tiny)       43337 B (- 5.7 kiB)
split (nand)       44423 B (- 4.6 kiB)

Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 467 deletions

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
deleted file mode 100755
index b5209f7014..0000000000
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,467 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-. /lib/functions/k2t.sh
-
-ath79_setup_interfaces()
-{
-	local board="$1"
-
-	case "$board" in
-	adtran,bsap1800-v2|\
-	adtran,bsap1840|\
-	alfa-network,ap121f|\
-	aruba,ap-105|\
-	avm,fritz300e|\
-	devolo,dvl1200i|\
-	devolo,dvl1750c|\
-	devolo,dvl1750i|\
-	devolo,dvl1750x|\
-	engenius,ecb1750|\
-	glinet,gl-ar300m-lite|\
-	netgear,ex6400|\
-	netgear,ex7300|\
-	ocedo,koala|\
-	ocedo,raccoon|\
-	pcs,cap324|\
-	pisen,ts-d084|\
-	pisen,wmb001n|\
-	pisen,wmm003n|\
-	pqi,air-pen|\
-	tplink,cpe210-v2|\
-	tplink,cpe210-v3|\
-	tplink,cpe510-v2|\
-	tplink,cpe510-v3|\
-	tplink,cpe610-v1|\
-	tplink,re350k-v1|\
-	tplink,re355-v1|\
-	tplink,re450-v1|\
-	tplink,re450-v2|\
-	tplink,tl-mr10u|\
-	tplink,tl-mr3020-v1|\
-	tplink,tl-mr3040-v2|\
-	tplink,tl-wa901nd-v2|\
-	tplink,tl-wr703n|\
-	ubnt,bullet-m|\
-	ubnt,bullet-m-xw|\
-	ubnt,lap-120|\
-	ubnt,nanobeam-ac|\
-	ubnt,nanostation-ac-loco|\
-	ubnt,rocket-m|\
-	ubnt,unifiac-lite|\
-	ubnt,unifiac-lr|\
-	ubnt,unifiac-mesh|\
-	ubnt,unifi|\
-	wd,mynet-wifi-rangeextender|\
-	winchannel,wb2000)
-		ucidef_set_interface_lan "eth0"
-		;;
-	avm,fritz4020|\
-	pcs,cr3000|\
-	tplink,archer-c58-v1|\
-	tplink,archer-c59-v1|\
-	tplink,archer-c59-v2)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
-		;;
-	buffalo,bhr-4grv|\
-	buffalo,wzr-hp-g450h)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
-		;;
-	buffalo,bhr-4grv2|\
-	trendnet,tew-823dru)
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
-		;;
-	buffalo,whr-g301n)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	buffalo,wzr-hp-ag300h|\
-	tplink,archer-c25-v1|\
-	tplink,tl-mr3220-v1|\
-	tplink,tl-mr3420-v1|\
-	tplink,tl-wdr3500-v1|\
-	tplink,tl-wr841-v7|\
-	tplink,tl-wr841-v9|\
-	tplink,tl-wr841-v10|\
-	tplink,tl-wr841-v11|\
-	tplink,tl-wr841-v12|\
-	tplink,tl-wr842n-v1|\
-	tplink,tl-wr842n-v3|\
-	tplink,tl-wr940n-v3|\
-	tplink,tl-wr940n-v4|\
-	tplink,tl-wr941nd-v6|\
-	ubnt,airrouter)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	buffalo,wzr-hp-g302h-a1a0)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
-		;;
-	comfast,cf-e110n-v2|\
-	comfast,cf-e120a-v3|\
-	comfast,cf-e314n-v2|\
-	tplink,cpe210-v1|\
-	tplink,cpe220-v2|\
-	tplink,cpe510-v1|\
-	ubnt,nanostation-m|\
-	ubnt,routerstation)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		;;
-	comfast,cf-wr650ac-v1|\
-	comfast,cf-wr650ac-v2)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
-		;;
-	devolo,dvl1200e|\
-	devolo,dvl1750e|\
-	ocedo,ursus)
-		ucidef_set_interface_lan "eth0 eth1"
-		;;
-	dlink,dir-825-b1)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1|\
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	dlink,dir-859-a1|\
-	engenius,epg5000|\
-	tplink,archer-c2-v3|\
-	tplink,tl-wr1043nd-v4|\
-	tplink,tl-wr1043n-v5)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-		;;
-	elecom,wrc-1750ghbk2-i|\
-	elecom,wrc-300ghbk2-i)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
-		;;
-	embeddedwireless,dorin)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
-		;;
-	engenius,ews511ap)
-		ucidef_set_interface_lan "eth0 eth1" "dhcp"
-		;;
-	etactica,eg200)
-		ucidef_set_interface_lan "eth0" "dhcp"
-		;;
-	glinet,gl-ar750)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan"
-		;;
-	glinet,gl-ar750s)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
-		;;
-	iodata,etg3-r|\
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr|\
-	iodata,wn-ac1600dgr2|\
-	iodata,wn-ag300dgr|\
-	pcs,cr5000|\
-	sitecom,wlr-7100|\
-	wd,mynet-n750)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	;;
-	librerouter,librerouter-v1)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "5:wan" "6@eth1" "4:lan"
-	;;
-	nec,wg1200cr|\
-	ubnt,nanostation-ac|\
-	ubnt,unifiac-mesh-pro|\
-	ubnt,unifiac-pro)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:wan"
-		;;
-	nec,wg800hp)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
-		;;
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800|\
-	netgear,wndr3800ch)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-		ucidef_add_switch_attr "switch0" "blinkrate" 2
-		ucidef_add_switch_port_attr "switch0" 1 led 6
-		ucidef_add_switch_port_attr "switch0" 2 led 9
-		ucidef_add_switch_port_attr "switch0" 5 led 2
-		;;
-	netgear,wnr1000-v2|\
-	netgear,wnr2000-v3|\
-	netgear,wnr612-v2|\
-	on,n150r|\
-	tplink,tl-wr740n-v1|\
-	tplink,tl-wr740n-v3|\
-	tplink,tl-wr741-v1|\
-	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v5|\
-	tplink,tl-wr941-v4)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-		"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	phicomm,k2t)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
-		;;
-	qihoo,c301)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan" "3:lan"
-		;;
-	rosinson,wr818)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:wan"
-		;;
-	tplink,archer-a7-v5|\
-	tplink,archer-c6-v2|\
-	tplink,archer-c7-v4|\
-	tplink,archer-c7-v5|\
-	tplink,tl-wdr3600-v1|\
-	tplink,tl-wdr4300-v1|\
-	tplink,tl-wr941n-v7-cn)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
-		;;
-	tplink,archer-c5-v1|\
-	tplink,archer-c7-v1|\
-	tplink,archer-c7-v2|\
-	tplink,tl-wdr4900-v2)
-		ucidef_add_switch "switch0" \
-			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
-		;;
-	tplink,archer-c60-v1|\
-	tplink,archer-c60-v2)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	tplink,archer-d50-v1)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
-		;;
-	tplink,tl-mr3420-v2|\
-	tplink,tl-wr740n-v4|\
-	tplink,tl-wr741nd-v4|\
-	tplink,tl-wr841-v8|\
-	tplink,tl-wr842n-v2)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
-		;;
-	tplink,tl-wr1043nd-v1)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
-		;;
-	tplink,tl-wr1043nd-v2|\
-	tplink,tl-wr1043nd-v3)
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
-		;;
-	tplink,tl-wr2543-v1)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
-		;;
-	tplink,tl-wr941-v2)
-		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
-		;;
-	ubnt,acb-isp)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
-		;;
-	ubnt,routerstation-pro)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	ubnt,nanostation-m-xw)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "5:lan" "1:wan"
-		;;
-	zbtlink,zbt-wd323|\
-	xiaomi,mi-router-4q)
-		ucidef_set_interface_wan "eth1"
-		ucidef_add_switch "switch0" \
-			"0@eth0" "3:lan:1" "4:lan:2"
-		;;
-	zyxel,nbg6716)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
-		;;
-	*)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
-	esac
-}
-
-ath79_setup_macs()
-{
-	local board="$1"
-
-	case "$board" in
-	adtran,bsap1800-v2|\
-	adtran,bsap1840)
-		lan_mac=$(mtd_get_mac_binary "Board data" 2)
-		label_mac=$lan_mac
-		;;
-	alfa-network,ap121f|\
-	ubnt,airrouter|\
-	ubnt,bullet-m|\
-	ubnt,nanostation-m|\
-	ubnt,rocket-m|\
-	ubnt,unifi)
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	avm,fritz300e)
-		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
-		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
-		;;
-	avm,fritz4020)
-		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
-		wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
-		;;
-	dlink,dir-825-b1)
-		lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
-		wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1)
-		lan_mac=$(mtd_get_mac_text "mac" 0x4)
-		wan_mac=$(mtd_get_mac_text "mac" 0x18)
-		;;
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	nec,wg1200cr)
-		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
-		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
-		label_mac=$lan_mac
-		;;
-	dlink,dir-859-a1|\
-	qihoo,c301|\
-	wd,mynet-n750)
-		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
-		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
-		;;
-	elecom,wrc-1750ghbk2-i|\
-	elecom,wrc-300ghbk2-i)
-		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
-		;;
-	engenius,ecb1750)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		label_mac=$(mtd_get_mac_ascii u-boot-env athaddr)
-		;;
-	engenius,epg5000)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		;;
-	engenius,ews511ap)
-		lan_mac=$(mtd_get_mac_text "u-boot-env" 0xe9)
-		eth1_mac=$(macaddr_add "$lan_mac" 1)
-		ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
-		ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
-		;;
-	iodata,etg3-r)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(macaddr_add "$lan_mac" -1)
-		label_mac=$wan_mac
-		;;
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr|\
-	iodata,wn-ac1600dgr2|\
-	iodata,wn-ag300dgr)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		label_mac=$wan_mac
-		;;
-	jjplus,ja76pf2)
-		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	nec,wg800hp)
-		lan_mac=$(mtd_get_mac_text board_data 0x280)
-		wan_mac=$(mtd_get_mac_text board_data 0x480)
-		label_mac=$wan_mac
-		;;
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800)
-		lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0x0)")
-		;;
-	phicomm,k2t)
-		lan_mac=$(k2t_get_mac "lan_mac")
-		wan_mac=$(k2t_get_mac "wan_mac")
-		;;
-	rosinson,wr818)
-		wan_mac=$(mtd_get_mac_binary factory 0x0)
-		lan_mac=$(macaddr_setbit_la "$wan_mac")
-		;;
-	sitecom,wlr-7100)
-		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
-		label_mac=$lan_mac
-		;;
-	tplink,archer-a7-v5|\
-	tplink,archer-c7-v4|\
-	tplink,archer-c7-v5|\
-	tplink,tl-wr1043nd-v4|\
-	tplink,tl-wr1043n-v5)
-		base_mac=$(mtd_get_mac_binary info 0x8)
-		wan_mac=$(macaddr_add "$base_mac" 1)
-		;;
-	tplink,tl-wr941-v2|\
-	tplink,tl-wr941n-v7-cn)
-		base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
-		wan_mac=$(macaddr_add "$base_mac" 1)
-		;;
-	trendnet,tew-823dru)
-		lan_mac=$(mtd_get_mac_text mac 0x4)
-		wan_mac=$(mtd_get_mac_text mac 0x18)
-		label_mac=$wan_mac
-		;;
-	ubnt,routerstation|\
-	ubnt,routerstation-pro)
-		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	wd,mynet-wifi-rangeextender)
-		lan_mac=$(nvram get et0macaddr)
-		;;
-	zyxel,nbg6716)
-		lan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
-		wan_mac=$(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
-		;;
-	esac
-
-	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
-	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ath79_setup_interfaces $board
-ath79_setup_macs $board
-board_config_flush
-
-exit 0