diff options
| author | Jackson Lim <jackcolentern@gmail.com> | 2019-07-20 15:37:12 +0800 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-07-24 11:36:02 +0200 |
| commit | 209b36825458a439fb9f0edd36f11e6528400f87 (patch) | |
| tree | 1a473147b0cad093334294d4c160e0cfb2e8c97f /target/linux/ath79/base-files/etc/board.d/02_network | |
| parent | 1282a630272c59dfd105262772a2ca136084db03 (diff) | |
| download | openwrt-209b36825458a439fb9f0edd36f11e6528400f87.tar.gz openwrt-209b36825458a439fb9f0edd36f11e6528400f87.tar.bz2 openwrt-209b36825458a439fb9f0edd36f11e6528400f87.zip | |
ath79: add support for D-Link DIR-842 C2
Hardware spec of DIR-842 C2:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: 2.0
Flash instructions:
1. Upgrade the factory.bin through the factory web interface or
the u-boot failsafe interface.
The firmware will boot up correctly for the first time.
Do not power off the device after OpenWrt has booted.
Otherwise the u-boot will enter failsafe mode as the checksum
of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
After upgrading completes the u-boot won't complain about the
firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
just upgrade the factory.bin through the u-boot failsafe interface
and then goto step 2.
Signed-off-by: Jackson Lim <jackcolentern@gmail.com>
[Reword reset-hog comment, fix formatting]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index ed33ff5aad..41ceb12ee5 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -112,6 +112,7 @@ ath79_setup_interfaces() ;; dlink,dir-825-c1|\ dlink,dir-835-a1|\ + dlink,dir-842-c2|\ dlink,dir-859-a1|\ engenius,epg5000|\ tplink,archer-c2-v3|\ @@ -303,6 +304,7 @@ ath79_setup_macs() lan_mac=$(mtd_get_mac_text "mac" 4) wan_mac=$(mtd_get_mac_text "mac" 24) ;; + dlink,dir-842-c2|\ dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) |