diff options
| author | Ryan Mounce <ryan@mounce.com.au> | 2019-05-25 22:06:05 +0930 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-05-27 22:44:08 +0200 |
| commit | 6d6985ff0e41c89650d72d2b5c0c938c2f39906e (patch) | |
| tree | 52e51137e26935d7e5e8102b4a6309c8d13038ea /target/linux/ath79/base-files/etc/board.d/02_network | |
| parent | 7d7787923673300c327faa0cc84ca55909f0c5f1 (diff) | |
| download | openwrt-6d6985ff0e41c89650d72d2b5c0c938c2f39906e.tar.gz openwrt-6d6985ff0e41c89650d72d2b5c0c938c2f39906e.tar.bz2 openwrt-6d6985ff0e41c89650d72d2b5c0c938c2f39906e.zip | |
ath79: add support for WD My Net N750
SoC: AR9344
RAM: 128MB
Flash: 16MiB Winbond 25Q128BVFG SPI NOR
5GHz WiFi: AR9380 PCIe 3x3:3 802.11n
2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n
5x Gigabit ethernet via AR8327N switch (green + amber LEDs)
2x USB 2.0 via GL850G hub
4x front LEDs from SoC GPIO
1x front WPS button from SoC GPIO
1x bottom reset button from SoC GPIO
Known issues:
AR8327N LEDs only have default functionality, not presented in sysfs.
This is a regression from ar71xx.
UART header JP1, 115200 no parity 1 stop
TX
GND
VCC
(N/P)
RX
See https://openwrt.org/toh/wd/n750 for flashing detail.
Procedures unchanged from ar71xx.
Tested sysupgrade + factory flash from WD Emergency Recovery
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 7b89274ccf..c2e994530d 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -126,7 +126,8 @@ ath79_setup_interfaces() iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr|\ - pcs,cr5000) + pcs,cr5000|\ + wd,mynet-n750) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" ;; @@ -290,7 +291,8 @@ ath79_setup_macs() wan_mac=$(mtd_get_mac_text "mac" 24) ;; dlink,dir-859-a1|\ - nec,wg1200cr) + nec,wg1200cr|\ + wd,mynet-n750) lan_mac=$(mtd_get_mac_ascii devdata "lanmac") wan_mac=$(mtd_get_mac_ascii devdata "wanmac") ;; |