ath79: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space (especially helpful for the tiny devices).

The only script remaining in parent base-files is
/etc/hotplug.d/ieee80211/00-wifi-migration, everything else is
moved/split.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (generic)   49135 B
split (generic)    48533 B (- 0.6 kiB)
split (tiny)       43337 B (- 5.7 kiB)
split (nand)       44423 B (- 4.6 kiB)

Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 167 deletions

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
deleted file mode 100644
index 91e813f121..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ /dev/null
@@ -1,167 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-. /lib/functions/k2t.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:00:00.0.bin")
-	case $board in
-	comfast,cf-wr650ac-v1|\
-	comfast,cf-wr650ac-v2|\
-	yuncore,a770)
-		caldata_extract "art" 0x5000 0x844
-		;;
-	devolo,dvl1200e|\
-	devolo,dvl1200i|\
-	devolo,dvl1750c|\
-	devolo,dvl1750e|\
-	devolo,dvl1750i|\
-	devolo,dvl1750x)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) -1)
-		;;
-	dlink,dir-859-a1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
-		;;
-	elecom,wrc-1750ghbk2-i)
-		caldata_extract "art" 0x5000 0x844
-		;;
-	engenius,ecb1750)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr)
-		;;
-	engenius,epg5000|\
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr2|\
-	sitecom,wlr-7100)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
-	engenius,ews511ap)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
-		;;
-	glinet,gl-ar750|\
-	glinet,gl-ar750s)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
-		;;
-	glinet,gl-x750)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
-		;;
-	nec,wg800hp)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_text board_data 0x880)
-		;;
-	ocedo,koala|\
-	ocedo,ursus)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
-		;;
-	openmesh,om5p-ac-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
-		;;
-	qihoo,c301)
-		caldata_extract "radiocfg" 0x5000 0x844
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
-		;;
-	tplink,archer-a7-v5|\
-	tplink,archer-c2-v3|\
-	tplink,archer-c7-v4|\
-	tplink,archer-c7-v5|\
-	tplink,archer-c25-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1)
-		;;
-	tplink,archer-c5-v1|\
-	tplink,archer-c7-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1)
-		;;
-	tplink,archer-d50-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2)
-		;;
-	tplink,re350k-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2)
-		;;
-	tplink,re355-v1|\
-	tplink,re450-v1)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
-		;;
-	tplink,re450-v2)
-		caldata_extract "art" 0x5000 0x844
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1)
-		;;
-	ubnt,unifiac-lite|\
-	ubnt,unifiac-lr|\
-	ubnt,unifiac-mesh|\
-	ubnt,unifiac-mesh-pro|\
-	ubnt,lap-120|\
-	ubnt,nanobeam-ac|\
-	ubnt,nanostation-ac|\
-	ubnt,nanostation-ac-loco|\
-	ubnt,unifiac-pro)
-		caldata_extract "EEPROM" 0x5000 0x844
-		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x5000 0x844
-		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-pci-0000:00:00.0.bin")
-	case $board in
-	comfast,cf-e313ac)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary art 0x6)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
-		;;
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	nec,wg1200cr)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	netgear,ex6400|\
-	netgear,ex7300)
-		caldata_extract "caldata" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
-		;;
-	phicomm,k2t)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(k2t_get_mac "5g_mac")
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	tplink,archer-c58-v1|\
-	tplink,archer-c59-v1|\
-	tplink,archer-c59-v2|\
-	tplink,archer-c60-v1|\
-	tplink,archer-c60-v2|\
-	tplink,archer-c6-v2)
-		caldata_extract "art" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1)
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	esac
-	;;
-*)
-	exit 1
-	;;
-esac