diff options
author | Leon M. George <leon@georgemail.eu> | 2019-07-26 20:32:55 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-03 17:37:02 +0200 |
commit | a0bb356612fddf747893fffbfa216dcb3c05f069 (patch) | |
tree | 556d74264853d7b3374b36fc077936f311b09cbf /target/linux/ath79/generic | |
parent | f09b9319c666e343763c7618878a503ad7eb7531 (diff) | |
download | openwrt-a0bb356612fddf747893fffbfa216dcb3c05f069.tar.gz openwrt-a0bb356612fddf747893fffbfa216dcb3c05f069.tar.bz2 openwrt-a0bb356612fddf747893fffbfa216dcb3c05f069.zip |
ath79: add support for Compex WPJ344
Specifications:
SoC: AR9344
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
2 Gigabit ethernet ports
2×2 2.4GHz on-board radio
miniPCIe slot that supports 5GHz radio
PoE 48V IEEE 802.3af/at - 24V passive optional
USB 2.0 header
Installation:
To install, either start tftp in bin/targets/ath79/generic/ and use
the u-boot prompt over UART:
tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj344-16m-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
boot
The cpximg file can be used with sysupgrade in the stock firmware (add
SSH key in luci for root access) or with the built-in cpximg loader.
The cpximg loader can be started either by holding the reset button
during power up or by entering the u-boot prompt and entering 'cpximg'.
Once it's running, a TFTP-server under 192.168.1.1 will accept the image
appropriate for the board revision that is etched on the board.
For example, if the board is labelled '6A08':
tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj344-16m-squashfs-cpximg-6a08.bin
MAC addresses:
<&uboot 0x2e010> *:99 (label)
<&uboot 0x2e018> *:9a
<&uboot 0x2e020> *:9b
<&uboot 0x2e028> *:9c
Only the first two are used (for ethernet), the WiFi modules have
separate (valid) addresses. The latter two addresses are not used.
Signed-off-by: Leon M. George <leon@georgemail.eu>
[minor commit message adjustments, drop gpio in DTS, DTS style fixes,
sorting, drop unused cpximg recipe]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/generic')
-rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/01_leds | 7 | ||||
-rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/02_network | 7 |
2 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index aaa830c6ea..2bd70aae31 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -115,6 +115,13 @@ engenius,ecb1750|\ enterasys,ws-ap3705i) ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0" ;; +compex,wpj344-16m) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "sig1" "SIG1" "wpj344:red:sig1" "wlan0" "85" "100" + ucidef_set_led_rssi "sig2" "SIG2" "wpj344:yellow:sig2" "wlan0" "75" "100" + ucidef_set_led_rssi "sig3" "SIG3" "wpj344:green:sig3" "wlan0" "65" "100" + ucidef_set_led_rssi "sig4" "SIG4" "wpj344:green:sig4" "wlan0" "50" "100" + ;; compex,wpj531-16m) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "sig1" "SIG1" "wpj531:red:sig1" "wlan0" "85" "100" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index d0e73a5d3f..f2b6ef0aed 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -131,6 +131,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" ;; + compex,wpj344-16m) + ucidef_add_switch "switch0" \ + "0@eth0" "3:lan" "2:wan" + ;; devolo,dvl1200e|\ devolo,dvl1750e|\ ocedo,ursus) @@ -366,6 +370,9 @@ ath79_setup_macs() lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)")) ;; + compex,wpj344-16m) + wan_mac=$(mtd_get_mac_binary u-boot 0x2e018) + ;; devolo,magic-2-wifi) label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3) ;; |