diff options
| author | Christopher Hill <ch6574@gmail.com> | 2020-05-25 21:10:00 -0400 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-15 21:16:18 +0200 |
| commit | b7a8a5454226f34256c5d76480dda5abb1308395 (patch) | |
| tree | 73e01cab13df38509f747e3dec442cf3442cfb7c /target/linux/ath79/mikrotik/config-default | |
| parent | fa70b3a4bbc65d372d735004d9df894bd1c89c81 (diff) | |
| download | openwrt-b7a8a5454226f34256c5d76480dda5abb1308395.tar.gz openwrt-b7a8a5454226f34256c5d76480dda5abb1308395.tar.bz2 openwrt-b7a8a5454226f34256c5d76480dda5abb1308395.zip | |
ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)
This patch adds support for the MikroTik RouterBOARD RB493G, ported
from the ar71xx target.
See https://routerboard.com/RB493G for details
Specification:
- SoC Qualcomm Atheros AR7161
- RAM: 256 MiB
- Storage: 128MiB NAND
- Ethernet: 9x 1000/100/10 Mbps
- USB 1x 2.0 / 1.0 type A
- PCIe: 3x Mini slot
- MicroSD slot
Working:
- Board/system detection
- Ethernet
- SPI
- NAND
- LEDs
- USB
- Sysupgrade
Enabled (but untested due to lack of hardware):
- PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed
Installation methods:
- tftp boot initramfs image, scp then flash via "sysupgrade -n"
- nand boot existing OpenWrt, scp then flash via "sysupgrade -n"
Notes:
- initramfs image will not work if uncompressed image size over ~8.5Mb
- The "rb4xx" drivers have been enabled
Signed-off-by: Christopher Hill <ch6574@gmail.com>
Diffstat (limited to 'target/linux/ath79/mikrotik/config-default')
| -rw-r--r-- | target/linux/ath79/mikrotik/config-default | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/target/linux/ath79/mikrotik/config-default b/target/linux/ath79/mikrotik/config-default index 94c63f82fb..ec34a7c143 100644 --- a/target/linux/ath79/mikrotik/config-default +++ b/target/linux/ath79/mikrotik/config-default @@ -2,16 +2,20 @@ CONFIG_AT803X_PHY=y CONFIG_CRC16=y CONFIG_CRYPTO_DEFLATE=y CONFIG_GPIO_LATCH=y +CONFIG_GPIO_RB4XX=y CONFIG_GPIO_WATCHDOG=y CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y CONFIG_LEDS_RESET=y CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_GPIO=y +CONFIG_MFD_RB4XX_CPLD=y CONFIG_MIKROTIK=y CONFIG_MIKROTIK_RB_SYSFS=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_AR934X=y CONFIG_MTD_NAND_CORE=y CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_RB4XX=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_ROUTERBOOT_PARTS=y CONFIG_MTD_SPI_NAND=y @@ -24,10 +28,12 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 # CONFIG_MTD_UBI_FASTMAP is not set # CONFIG_MTD_UBI_GLUEBI is not set CONFIG_NET_SWITCHDEV=y +CONFIG_PCI_AR71XX=y CONFIG_PHY_AR7100_USB=y CONFIG_PHY_AR7200_USB=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_SPI_RB4XX=y CONFIG_UBIFS_FS=y CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y |