diff options
author | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-12 19:51:22 +0200 |
---|---|---|
committer | Álvaro Fernández Rojas <noltari@gmail.com> | 2023-06-15 20:47:40 +0200 |
commit | 38ebb2eafde604ff6d9b0021d1d21208070a2d09 (patch) | |
tree | e91cafd6e6bc44f5e775750649ff205020fc4272 /target/linux/bmips | |
parent | 434434ca4748ba669176ce38b70a6525f90598b6 (diff) | |
download | openwrt-38ebb2eafde604ff6d9b0021d1d21208070a2d09.tar.gz openwrt-38ebb2eafde604ff6d9b0021d1d21208070a2d09.tar.bz2 openwrt-38ebb2eafde604ff6d9b0021d1d21208070a2d09.zip |
bmips: add support for Sercomm AD1018
The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with
two internal antennas.
Hardware:
- SoC: Broadcom BCM6328
- CPU: single core BMIPS4350 @ 320Mhz
- RAM: 64 MB (v1) / 128 MB (v2) DDR
- Flash: 128 MB NAND
- Ethernet LAN: 4x 100Mbit
- Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn
- USB: 1x 2.0
- Buttons: 3x (reset)
- LEDs: yes
- UART: yes
Installation via OEM web UI:
1. Use the admin credentials to login via web UI
2. Go to Managament->Update firmware and select the OpenWrt CFE firmware
3. Press "Update Firmware" button and wait some minutes until it finish
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/bmips')
5 files changed, 353 insertions, 0 deletions
diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds new file mode 100644 index 0000000000..5ece1f7ba1 --- /dev/null +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in +sercomm,ad1018) + ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network index c9c704067e..66f9282e48 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network @@ -10,6 +10,10 @@ comtrend,ar-5387un) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; +sercomm,ad1018) + ucidef_set_bridge_device switch + ucidef_set_interface_lan "lan1 lan2 lan3 fibre" + ;; esac board_config_flush diff --git a/target/linux/bmips/bcm6328/base-files/lib/upgrade/platform.sh b/target/linux/bmips/bcm6328/base-files/lib/upgrade/platform.sh index 1cf95be26a..d820b20718 100644 --- a/target/linux/bmips/bcm6328/base-files/lib/upgrade/platform.sh +++ b/target/linux/bmips/bcm6328/base-files/lib/upgrade/platform.sh @@ -9,6 +9,9 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in + sercomm,ad1018) + nand_do_upgrade "$1" + ;; *) default_do_upgrade "$1" ;; diff --git a/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dts b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dts new file mode 100644 index 0000000000..5d18266818 --- /dev/null +++ b/target/linux/bmips/dts/bcm6328-sercomm-ad1018.dts @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "bcm6328.dtsi" + +/ { + model = "Sercomm AD1018"; + compatible = "sercomm,ad1018", "brcm,bcm6328"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_green; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + debounce-interval = <60>; + }; + + wlan { + label = "wlan"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WLAN>; + debounce-interval = <60>; + }; + + reset { + label = "reset"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <60>; + }; + }; + + bcm432217-sprom { + compatible = "brcm,bcma-sprom"; + + pci-bus = <1>; + pci-dev = <0>; + + nvmem-cells = <&macaddr_cferom_6a0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + + brcm,sprom = "brcm/bcm43217-sprom.bin"; + brcm,sprom-fixups = <6 0x1c00>, + <65 0x1256>, + <96 0x2046>, + <97 0xfe69>, + <98 0x1726>, + <99 0xfa5c>, + <112 0x2046>, + <113 0xfea8>, + <114 0x1978>, + <115 0xfa26>, + <161 0x2222>, + <169 0x2222>, + <171 0x2222>, + <173 0x2222>, + <174 0x4444>, + <175 0x2222>, + <176 0x4444>; + }; +}; + +&ehci { + status = "okay"; +}; + +ðernet { + status = "okay"; + + nvmem-cells = <&macaddr_cferom_6a0>; + nvmem-cell-names = "mac-address"; +}; + +&leds { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led + &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led + &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>; + + brcm,serial-leds; + brcm,serial-shift-inv; + brcm,serial-dat-low; + + led@0 { + reg = <0>; + active-low; + label = "red:internet"; + }; + + led@1 { + reg = <1>; + active-low; + label = "green:internet"; + }; + + led_power_green: led@8 { + reg = <8>; + active-low; + label = "green:power"; + default-state = "on"; + }; + + led@10 { + reg = <10>; + active-low; + label = "green:adsl"; + }; + + led@11 { + reg = <11>; + active-low; + label = "red:adsl"; + }; + + led@12 { + reg = <12>; + active-low; + label = "green:phone"; + }; + + led@13 { + reg = <13>; + active-low; + label = "green:wps"; + }; + + led@14 { + reg = <14>; + active-low; + label = "green:wifi"; + }; + + led@15 { + reg = <15>; + active-low; + label = "green:usb"; + }; + + led@17 { + /* EPHY0 Spd */ + reg = <17>; + brcm,hardware-controlled; + }; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pinctrl { + pinctrl_leds: leds { + function = "led"; + pins = "gpio0", "gpio1"; + }; +}; + +&nflash { + status = "okay"; + + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-step-size = <512>; + nand-ecc-strength = <15>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + cferom: partition@0 { + label = "cferom"; + reg = <0x0000000 0x0020000>; + read-only; + }; + + partition@20000 { + label = "mmap"; + reg = <0x0020000 0x00a0000>; + read-only; + }; + + partition@c0000 { + label = "cferam1"; + reg = <0x00c0000 0x0140000>; + read-only; + }; + + partition@200000 { + label = "cferam2"; + reg = <0x0200000 0x0140000>; + read-only; + }; + + partition@340000 { + label = "serial"; + reg = <0x0340000 0x00a0000>; + read-only; + }; + + partition@3e0000 { + label = "protect"; + reg = <0x03e0000 0x0140000>; + read-only; + }; + + partition@6920000 { + label = "bootflag1"; + reg = <0x6920000 0x0140000>; + read-only; + }; + + partition@6a60000 { + label = "bootflag2"; + reg = <0x6a60000 0x0140000>; + read-only; + }; + + partition@520000 { + compatible = "sercomm,wfi"; + label = "wfi"; + reg = <0x0520000 0x6400000>; + }; + + partition@6ba0000 { + label = "xml_cfg"; + reg = <0x6ba0000 0x0280000>; + read-only; + }; + + partition@6e20000 { + label = "app_dat"; + reg = <0x6e20000 0x0280000>; + read-only; + }; + }; + }; +}; + +&switch0 { + ports { + port@0 { + reg = <0>; + label = "fibre"; + + phy-handle = <&phy1>; + phy-mode = "mii"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + + phy-handle = <&phy2>; + phy-mode = "mii"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + + phy-handle = <&phy3>; + phy-mode = "mii"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + + phy-handle = <&phy4>; + phy-mode = "mii"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usbh { + status = "okay"; +}; + +&cferom { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_cferom_6a0: macaddr@6a0 { + reg = <0x6a0 0x6>; + }; +}; diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk index dfa134df94..ef74410f1e 100644 --- a/target/linux/bmips/image/bcm6328.mk +++ b/target/linux/bmips/image/bcm6328.mk @@ -25,3 +25,21 @@ define Device/comtrend_ar-5387un kmod-leds-bcm6328 endef TARGET_DEVICES += comtrend_ar-5387un + +define Device/sercomm_ad1018 + $(Device/sercomm-nand) + DEVICE_VENDOR := Sercomm + DEVICE_MODEL := AD1018 + CHIP_ID := 6328 + BLOCKSIZE := 128k + PAGESIZE := 2048 + SUBPAGESIZE := 512 + VID_HDR_OFFSET := 2048 + DEVICE_PACKAGES += $(USB2_PACKAGES) \ + $(B43_PACKAGES) broadcom-43217-sprom \ + kmod-leds-bcm6328 + SERCOMM_FSVER := 1001 + SERCOMM_HWVER := 1415153 + SERCOMM_SWVER := 3013 +endef +TARGET_DEVICES += sercomm_ad1018 |