ipq40xx: split files in 6.1 and 6.6 dedicated directory

Since with recent kernel version DTS moved to a dedicated directory,
it's required to split files to per kernel version to follow kernel
version directory structure.

Also makes use of DEVICE_DTS_DIR to target the correct DTS directory
based on the kernel version.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

1 files changed, 271 insertions, 0 deletions

diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi
new file mode 100644
index 0000000000..4b3b682260
--- /dev/null
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+
+			ethphy: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+		};
+
+		counter@4a1000 {
+			compatible = "qcom,qca-gcnt";
+			reg = <0x4a1000 0x4>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		i2c_0: i2c@78b7000 {
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			tpm@29 {
+				/* No Driver */
+				compatible = "atmel,at97sc3203";
+				reg = <0x29>;
+				read-only;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset button";
+			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	/* Texas Instruments CC2540T BLE radio */
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&serial_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&tlmm {
+	mdio_pins: mdio_pinmux {
+		mux_1 {
+			pins = "gpio6";
+			function = "mdio";
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio7";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	nand_pins: nand_pins {
+		pullups {
+			pins = "gpio53", "gpio58", "gpio59";
+			function = "qpic";
+			bias-pull-up;
+		};
+
+		pulldowns {
+			pins = "gpio54", "gpio55", "gpio56",
+				"gpio57", "gpio60", "gpio61",
+				"gpio62", "gpio63", "gpio64",
+				"gpio65", "gpio66", "gpio67",
+				"gpio68", "gpio69";
+			function = "qpic";
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio13", "gpio14", "gpio15";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio12";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	i2c_0_pins: i2c_0_pinmux {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "blsp_i2c0";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+	serial_0_pins: serial_0_pinmux {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+
+	serial_1_pins: serial_1_pinmux {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "blsp_uart1";
+			bias-disable;
+		};
+	};
+};
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				/* 'aos0' in Aruba firmware */
+				label = "aos0";
+				reg = <0x0 0x2000000>;
+				read-only;
+			};
+
+			partition@2000000 {
+				/* 'aos1' in Aruba firmware */
+				label = "ubi";
+				reg = <0x2000000 0x2000000>;
+			};
+
+			partition@4000000 {
+				label = "aruba-ubifs";
+				reg = <0x4000000 0x4000000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	/delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii-id";
+};
+
+&ethphy0 {
+	status = "disabled";
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&ethphy2 {
+	status = "disabled";
+};
+
+&ethphy3 {
+	status = "disabled";
+};
+
+&ethphy4 {
+	status = "disabled";
+};
+
+&psgmiiphy {
+	status = "disabled";
+};
+
+&wifi0 {
+	status = "okay";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d 0>;
+	qcom,ath10k-calibration-variant = "Aruba-AP-303";
+};
+
+&wifi1 {
+	status = "okay";
+	nvmem-cell-names = "pre-calibration", "mac-address";
+	nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d 1>;
+	qcom,ath10k-calibration-variant = "Aruba-AP-303";
+};