mpc85xx: remove 5.15 support

Kernel is switched to 6.1. Lets remove 5.15 support.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

15 files changed, 0 insertions, 1001 deletions

diff --git a/target/linux/mpc85xx/config-5.15 b/target/linux/mpc85xx/config-5.15
deleted file mode 100644
index 86b300ffc3..0000000000
--- a/target/linux/mpc85xx/config-5.15
+++ /dev/null
@@ -1,270 +0,0 @@
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_ASN1=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_BR200_WP is not set
-# CONFIG_BSC9131_RDB is not set
-# CONFIG_BSC9132_QDS is not set
-# CONFIG_C293_PCIE is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMMON_CLK is not set
-CONFIG_COMPAT_32BIT_TIME=y
-# CONFIG_CORENET_GENERIC is not set
-# CONFIG_CPM2 is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CRYPTO_AES_PPC_SPE is not set
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
-# CONFIG_CRYPTO_MD5_PPC is not set
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
-# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
-CONFIG_DATA_SHIFT=12
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_E500=y
-CONFIG_E500_CPU=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_MPC85XX=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_FIREBOX_T10 is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_FSL_DPAA2_SWITCH is not set
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_FSL_FMAN is not set
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GEN_RTC=y
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HIVEAP_330 is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MPC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MMU_GATHER_PAGE_SIZE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC85xx_RDB is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-CONFIG_MPIC_TIMER=y
-CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MVME2500 is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=1
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_QORIQ_EFUSE is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DMA_DEFAULT_COHERENT=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_P1010_RDB is not set
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDB is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PANDA is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_PMU_SYSFS is not set
-# CONFIG_PPA8548 is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BARRIER_NOSPEC=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_BOOK3S_32 is not set
-CONFIG_PPC_DOORBELL=y
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FSL_BOOK3E=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_PAGE_SHIFT=12
-# CONFIG_PPC_QEMU_E500 is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QE_GPIO=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RAS=y
-# CONFIG_RED_15W_REV1 is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-# CONFIG_SCOM_DEBUGFS is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SOCRATES is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPE_POSSIBLE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TARGET_CPU="8540"
-CONFIG_TARGET_CPU_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TL_WDR4900_V1 is not set
-# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_TWR_P102x is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WS_AP3710I is not set
-# CONFIG_WS_AP3715I is not set
-# CONFIG_WS_AP3825I is not set
-# CONFIG_XES_MPC85xx is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
diff --git a/target/linux/mpc85xx/patches-5.15/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-5.15/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
deleted file mode 100644
index 5e5ab10daf..0000000000
--- a/target/linux/mpc85xx/patches-5.15/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx
- 	{ .compatible = "fsl,mpc8548-guts", },
- 	/* Probably unnecessary? */
- 	{ .compatible = "gpio-leds", },
-+	{ .compatible = "gpio-keys", },
- 	/* For all PCI controllers */
- 	{ .compatible = "fsl,mpc8540-pci", },
- 	{ .compatible = "fsl,mpc8548-pcie", },
diff --git a/target/linux/mpc85xx/patches-5.15/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.15/100-powerpc-85xx-tl-wdr4900-v1-support.patch
deleted file mode 100644
index fa27e9665d..0000000000
--- a/target/linux/mpc85xx/patches-5.15/100-powerpc-85xx-tl-wdr4900-v1-support.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/Makefile           |  3 ++-
- arch/powerpc/boot/wrapper            |  5 +++++
- arch/powerpc/platforms/85xx/Kconfig  | 12 ++++++++++++
- arch/powerpc/platforms/85xx/Makefile |  1 +
- 4 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- 
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
- 
-@@ -343,7 +344,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
- image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
--
-+image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
- 
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -339,6 +339,11 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-tl-wdr4900-v1)
-+    platformo="$object/fixed-head.o $object/simpleboot.o"
-+    link_address='0x1500000'
-+    binary=y
-+    ;;
- simpleboot-*)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
-     binary=y
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -170,6 +170,18 @@ config STX_GP3
- 	select CPM2
- 	select DEFAULT_UIMAGE
- 
-+config TL_WDR4900_V1
-+    bool "TP-Link TL-WDR4900 v1"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    select SWIOTLB
-+    help
-+      This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+      This board is a Concurrent Dual-Band wireless router with a
-+      Freescale P1014 SoC.
-+
- config TQM8540
- 	bool "TQ Components TQM8540"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
- obj-$(CONFIG_PPA8548)     += ppa8548.o
- obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
diff --git a/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch
deleted file mode 100644
index 7d531e4ffc..0000000000
--- a/target/linux/mpc85xx/patches-5.15/101-powerpc-85xx-hiveap-330-support.patch
+++ /dev/null
@@ -1,58 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -49,6 +49,17 @@ config BSC9132_QDS
- 	  and dual StarCore SC3850 DSP cores.
- 	  Manufacturer : Freescale Semiconductor, Inc
- 
-+config HIVEAP_330
-+    bool "Aerohive HiveAP-330"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    help
-+      This option enables support for the Aerohive HiveAP-330 board.
-+
-+      This board is a Concurrent Dual-Band wireless access point with a
-+      Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -12,6 +12,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE)   += c293pcie.o
-+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- 
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
-@@ -344,6 +345,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
- image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
-+image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -339,6 +339,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-hiveap-330|\
- simpleboot-tl-wdr4900-v1)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
-     link_address='0x1500000'
diff --git a/target/linux/mpc85xx/patches-5.15/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-5.15/102-powerpc-add-cmdline-override.patch
deleted file mode 100644
index 0d26dc8501..0000000000
--- a/target/linux/mpc85xx/patches-5.15/102-powerpc-add-cmdline-override.patch
+++ /dev/null
@@ -1,37 +0,0 @@
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -915,6 +915,14 @@ config CMDLINE_FORCE
- 
- endchoice
- 
-+config CMDLINE_OVERRIDE
-+    bool "Use alternative cmdline from device tree"
-+    help
-+      Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+      be used, this is not a good option for kernels that are shared across
-+      devices. This setting enables using "chosen/cmdline-override" as the
-+      cmdline if it exists in the device tree.
-+
- config EXTRA_TARGETS
- 	string "Additional default image types"
- 	help
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1162,6 +1162,17 @@ int __init early_init_dt_scan_chosen(uns
- 	if (p != NULL && l > 0)
- 		strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
- 
-+    /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+     * device tree option of chosen/bootargs-override. This is
-+     * helpful on boards where u-boot sets bootargs, and is unable
-+     * to be modified.
-+     */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+	p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+	if (p != NULL && l > 0)
-+		strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- 	/*
- 	 * CONFIG_CMDLINE is meant to be a default in case nothing else
- 	 * managed to set the command line, unless CONFIG_CMDLINE_FORCE
diff --git a/target/linux/mpc85xx/patches-5.15/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-5.15/103-powerpc-85xx-red-15w-rev1.patch
deleted file mode 100644
index 66044878eb..0000000000
--- a/target/linux/mpc85xx/patches-5.15/103-powerpc-85xx-red-15w-rev1.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -173,6 +173,16 @@ config XES_MPC85xx
- 	  Manufacturer: Extreme Engineering Solutions, Inc.
- 	  URL: <https://www.xes-inc.com/>
- 
-+config RED_15W_REV1
-+	bool "Sophos RED 15w Rev.1"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Sophos RED 15w Rev.1 board.
-+
-+	  This board is a wireless VPN router with a Freescale P1010 SoC.
-+
- config STX_GP3
- 	bool "Silicon Turnkey Express GP3"
- 	help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
-+obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
- obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
- obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
diff --git a/target/linux/mpc85xx/patches-5.15/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-5.15/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
deleted file mode 100644
index 94ed26c3df..0000000000
--- a/target/linux/mpc85xx/patches-5.15/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -5,10 +5,15 @@
-  * Copyright 2009-2012 Freescale Semiconductor Inc.
-  */
- 
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
- 
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
--	model = "fsl,P2020RDB";
-+	model = "Freescale P2020RDB";
- 	compatible = "fsl,P2020RDB";
- 
- 	aliases {
-@@ -34,48 +39,38 @@
- 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
- 
- 		nor@0,0 {
--			#address-cells = <1>;
--			#size-cells = <1>;
- 			compatible = "cfi-flash";
- 			reg = <0x0 0x0 0x1000000>;
- 			bank-width = <2>;
- 			device-width = <1>;
- 
--			partition@0 {
--				/* This location must not be altered  */
--				/* 256KB for Vitesse 7385 Switch firmware */
--				reg = <0x0 0x00040000>;
--				label = "NOR (RO) Vitesse-7385 Firmware";
--				read-only;
--			};
--
--			partition@40000 {
--				/* 256KB for DTB Image */
--				reg = <0x00040000 0x00040000>;
--				label = "NOR (RO) DTB Image";
--				read-only;
--			};
-+			partitions {
-+				compatible = "fixed-partitions";
-+				#address-cells = <1>;
-+				#size-cells = <1>;
- 
--			partition@80000 {
--				/* 3.5 MB for Linux Kernel Image */
--				reg = <0x00080000 0x00380000>;
--				label = "NOR (RO) Linux Kernel Image";
--				read-only;
--			};
-+				partition@0 {
-+					/* This location must not be altered  */
-+					/* 256KB for Vitesse 7385 Switch firmware */
-+					reg = <0x0 0x00040000>;
-+					label = "NOR (RO) Vitesse-7385 Firmware";
-+					read-only;
-+				};
- 
--			partition@400000 {
--				/* 11MB for JFFS2 based Root file System */
--				reg = <0x00400000 0x00b00000>;
--				label = "NOR (RW) JFFS2 Root File System";
--			};
-+				partition@40000 {
-+					compatible = "denx,fit";
-+					reg = <0x00040000 0x00ec0000>;
-+					label = "firmware";
-+				};
- 
--			partition@f00000 {
--				/* This location must not be altered  */
--				/* 512KB for u-boot Bootloader Image */
--				/* 512KB for u-boot Environment Variables */
--				reg = <0x00f00000 0x00100000>;
--				label = "NOR (RO) U-Boot Image";
--				read-only;
-+				partition@f00000 {
-+					/* This location must not be altered  */
-+					/* 512KB for u-boot Bootloader Image */
-+					/* 512KB for u-boot Environment Variables */
-+					reg = <0x00f00000 0x00100000>;
-+					label = "u-boot";
-+					read-only;
-+				};
- 			};
- 		};
- 
-@@ -85,6 +80,7 @@
- 			compatible = "fsl,p2020-fcm-nand",
- 				     "fsl,elbc-fcm-nand";
- 			reg = <0x1 0x0 0x40000>;
-+			nand-ecc-mode = "none";
- 
- 			partition@0 {
- 				/* This location must not be altered  */
-@@ -140,13 +136,43 @@
- 	soc: soc@ffe00000 {
- 		ranges = <0x0 0x0 0xffe00000 0x100000>;
- 
-+		gpio0: gpio-controller@fc00 {
-+		};
-+
- 		i2c@3000 {
-+			temperature-sensor@4c {
-+				compatible = "adi,adt7461";
-+				reg = <0x4c>;
-+			};
-+
-+			eeprom@50 {
-+				compatible = "atmel,24c256";
-+				reg = <0x50>;
-+			};
-+
- 			rtc@68 {
- 				compatible = "dallas,ds1339";
- 				reg = <0x68>;
- 			};
- 		};
- 
-+		i2c@3100 {
-+			pmic@11 {
-+				compatible = "zl2006";
-+				reg = <0x11>;
-+			};
-+
-+			gpio@18 {
-+				compatible = "nxp,pca9557";
-+				reg = <0x18>;
-+			};
-+
-+			eeprom@52 {
-+				compatible = "atmel,24c01";
-+				reg = <0x52>;
-+			};
-+		};
-+
- 		spi@7000 {
- 			flash@0 {
- 				#address-cells = <1>;
-@@ -200,10 +226,12 @@
- 			phy0: ethernet-phy@0 {
- 				interrupts = <3 1 0 0>;
- 				reg = <0x0>;
-+				reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- 			};
- 			phy1: ethernet-phy@1 {
- 				interrupts = <3 1 0 0>;
- 				reg = <0x1>;
-+				reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- 			};
- 			tbi-phy@2 {
- 				device_type = "tbi-phy";
diff --git a/target/linux/mpc85xx/patches-5.15/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-5.15/105-powerpc-85xx-panda-support.patch
deleted file mode 100644
index 4913c614a8..0000000000
--- a/target/linux/mpc85xx/patches-5.15/105-powerpc-85xx-panda-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -60,6 +60,17 @@ config HIVEAP_330
-       This board is a Concurrent Dual-Band wireless access point with a
-       Freescale P1020 SoC.
- 
-+config PANDA
-+	bool "OCEDO PANDA"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the OCEDO PANDA board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
- obj-$(CONFIG_P1022_DS)    += p1022_ds.o
- obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
-+obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
diff --git a/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch
deleted file mode 100644
index 124376ffd9..0000000000
--- a/target/linux/mpc85xx/patches-5.15/106-powerpc-85xx-ws-ap3710i-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -71,6 +71,17 @@ config PANDA
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config WS_AP3710I
-+	bool "Enterasys WS-AP3710i"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Enterasys WS-AP3710i board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
-+obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch
deleted file mode 100644
index 9ccd9e877f..0000000000
--- a/target/linux/mpc85xx/patches-5.15/107-powerpc-85xx-add-ws-ap3825i-support.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001
-From: Martin Kennedy <hurricos@gmail.com>
-Date: Sat, 1 Jan 2022 11:01:37 -0500
-Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support
-
-This patch adds support for building Linux for the Extreme Networks
-WS-AP3825i AP.
-
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -82,6 +82,16 @@ config WS_AP3710I
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config WS_AP3825I
-+	bool "Extreme Networks WS-AP3825i"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Extreme Networks WS-AP3825i board.
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1020 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
-+obj-$(CONFIG_WS_AP3825I)  += ws-ap3825i.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -165,6 +165,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) +=
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
- src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-+src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
- 
- src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c
- 
-@@ -347,6 +348,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
- image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
-+image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
- 
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -340,6 +340,7 @@ adder875-redboot)
-     binary=y
-     ;;
- simpleboot-hiveap-330|\
-+simpleboot-ws-ap3825i|\
- simpleboot-tl-wdr4900-v1)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
-     link_address='0x1500000'
diff --git a/target/linux/mpc85xx/patches-5.15/108-powerpc-85xx-firebox-t10-support.patch.patch b/target/linux/mpc85xx/patches-5.15/108-powerpc-85xx-firebox-t10-support.patch.patch
deleted file mode 100644
index b074113eaa..0000000000
--- a/target/linux/mpc85xx/patches-5.15/108-powerpc-85xx-firebox-t10-support.patch.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -92,6 +92,16 @@ config WS_AP3825I
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config FIREBOX_T10
-+	bool "Watchguard Firebox T10"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Watchguard Firebox T10 board.
-+	  This board is a VPN Gateway-Router with a
-+	  Freescale P1010 SoC.
-+
- config MPC8540_ADS
- 	bool "Freescale MPC8540 ADS"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
- obj-$(CONFIG_WS_AP3825I)  += ws-ap3825i.o
-+obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU)	+= t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1)	+= red15w_rev1.o
diff --git a/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch
deleted file mode 100644
index 59f3184295..0000000000
--- a/target/linux/mpc85xx/patches-5.15/109-powerpc-85xx-add-ws-ap3715i-support.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -82,6 +82,17 @@ config WS_AP3710I
- 	  This board is a Concurrent Dual-Band wireless access point with a
- 	  Freescale P1020 SoC.
- 
-+config WS_AP3715I
-+	bool "Enterasys WS-AP3715i"
-+	select DEFAULT_UIMAGE
-+	select ARCH_REQUIRE_GPIOLIB
-+	select GPIO_MPC8XXX
-+	help
-+	  This option enables support for the Enterasys WS-AP3715i board.
-+
-+	  This board is a Concurrent Dual-Band wireless access point with a
-+	  Freescale P1010 SoC.
-+
- config WS_AP3825I
- 	bool "Extreme Networks WS-AP3825i"
- 	select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
- obj-$(CONFIG_PANDA)       += panda.o
- obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
- obj-$(CONFIG_WS_AP3710I)  += ws-ap3710i.o
-+obj-$(CONFIG_WS_AP3715I)  += ws-ap3715i.o
- obj-$(CONFIG_WS_AP3825I)  += ws-ap3825i.o
- obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
- obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -348,6 +348,7 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
- image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
-+image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
- image-$(CONFIG_WS_AP3825I)		+= simpleImage.ws-ap3825i
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -340,6 +340,7 @@ adder875-redboot)
-     binary=y
-     ;;
- simpleboot-hiveap-330|\
-+simpleboot-ws-ap3715i|\
- simpleboot-ws-ap3825i|\
- simpleboot-tl-wdr4900-v1)
-     platformo="$object/fixed-head.o $object/simpleboot.o"
diff --git a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch
deleted file mode 100644
index 21a26f1a73..0000000000
--- a/target/linux/mpc85xx/patches-5.15/110-powerpc-85xx-br200-wp-support.patch
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -49,6 +49,16 @@ config BSC9132_QDS
- 	  and dual StarCore SC3850 DSP cores.
- 	  Manufacturer : Freescale Semiconductor, Inc
- 
-+config BR200_WP
-+    bool "Aerohive BR200-WP"
-+    select DEFAULT_UIMAGE
-+    select ARCH_REQUIRE_GPIOLIB
-+    select GPIO_MPC8XXX
-+    help
-+      This option enables support for the Aerohive BR200-WP board.
-+
-+      This board is a wireless router with a Freescale P1011 SoC.
-+
- config HIVEAP_330
-     bool "Aerohive HiveAP-330"
-     select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -12,6 +12,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE)   += c293pcie.o
-+obj-$(CONFIG_BR200_WP) += br200-wp.o
- obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -163,6 +163,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
- src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S
-@@ -346,6 +347,7 @@ image-$(CONFIG_TQM8548)			+= cuImage.tqm
- image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
- image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
- image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
-+image-$(CONFIG_BR200_WP)		+= simpleImage.br200-wp
- image-$(CONFIG_HIVEAP_330)		+= simpleImage.hiveap-330
- image-$(CONFIG_TL_WDR4900_V1)		+= simpleImage.tl-wdr4900-v1
- image-$(CONFIG_WS_AP3715I)		+= simpleImage.ws-ap3715i
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -339,6 +339,7 @@ adder875-redboot)
-     platformo="$object/fixed-head.o $object/redboot-8xx.o"
-     binary=y
-     ;;
-+simpleboot-br200-wp|\
- simpleboot-hiveap-330|\
- simpleboot-ws-ap3715i|\
- simpleboot-ws-ap3825i|\
diff --git a/target/linux/mpc85xx/patches-5.15/150-arch-powerpc-simpleboot-prevent-overwrite-of-CPU1-sp.patch b/target/linux/mpc85xx/patches-5.15/150-arch-powerpc-simpleboot-prevent-overwrite-of-CPU1-sp.patch
deleted file mode 100644
index 1ff80a5016..0000000000
--- a/target/linux/mpc85xx/patches-5.15/150-arch-powerpc-simpleboot-prevent-overwrite-of-CPU1-sp.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 5f856ccc34df25060d36a5a81b7b45b574d86e35 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 3 Dec 2023 20:09:24 +0100
-Subject: [PATCH] arch: powerpc: simpleboot: prevent overwrite of CPU1
- spin-table
-
-Don't overwrite the spin-table of additional CPU cores with loader-heap.
-
-U-Boot places the spin-table for CPU1 on P1020 SoCs in the top 1MB of
-system-memory. Instead of parsing reserved-memory (which would be
-considerable more work), reduce the available system-memory for the
-loader by 1MB.
-
-This prevents the loader from overwriting the spin-table of
-additional CPU cores on these platforms.
-
-Linux itself needs to be made aware by this using reserved-memory
-definitions.
-
-This patch is required for using CPU1 on the Extreme Networks
-WS-AP3825i.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/simpleboot.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/powerpc/boot/simpleboot.c
-+++ b/arch/powerpc/boot/simpleboot.c
-@@ -65,6 +65,11 @@ void platform_init(unsigned long r3, uns
- 	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
- 		memsize64 = 0xffffffff;
- 
-+	/* Reserve upper 1 MB of memory for CPU1 spin-table */
-+	if (memsize64 > 0x100000) {
-+		memsize64 = memsize64 - 0x100000;
-+	}
-+
- 	/* finally, setup the timebase */
- 	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
- 					     "cpu", sizeof("cpu"));
diff --git a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch
deleted file mode 100644
index 7f99bd5211..0000000000
--- a/target/linux/mpc85xx/patches-5.15/900-powerpc-bootwrapper-disable-uImage-generation.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 29 Feb 2020 14:27:04 +0100
-Subject: [PATCH] powerpc: bootwrapper: disable uImage generation
-
-Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to
-instruct the mkimage to use the xz compression, which isn't
-supported. This disables the uImage generation, as OpenWrt
-generates individual uImages for each board using it's own
-toolchain.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/powerpc/boot/Makefile | 9 ---------
- 1 file changed, 9 deletions(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -275,7 +275,6 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
- image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
- image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
- image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
--image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
- image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
- 
- #
-@@ -411,15 +410,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits
- $(obj)/vmlinux.strip: vmlinux
- 	$(STRIP) -s -R .comment $< -o $@
- 
--$(obj)/uImage: vmlinux $(wrapperbits) FORCE
--	$(call if_changed,wrap,uboot)
--
--$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
--	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
--
--$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
--	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
--
- $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
- 	$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
-