diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-08-18 14:50:20 +0900 |
|---|---|---|
| committer | Chuanhong Guo <gch981213@gmail.com> | 2019-09-25 14:44:36 +0800 |
| commit | b7ec6659a14d1a11e52b56235274b3e46d22e331 (patch) | |
| tree | 51db015026405038ce078e61194ff695f7736cae /target/linux/ramips/base-files/etc/board.d/02_network | |
| parent | 93b6cc97ca9694434faef69c6c5145b5dc7c1ae4 (diff) | |
| download | openwrt-b7ec6659a14d1a11e52b56235274b3e46d22e331.tar.gz openwrt-b7ec6659a14d1a11e52b56235274b3e46d22e331.tar.bz2 openwrt-b7ec6659a14d1a11e52b56235274b3e46d22e331.zip | |
ramips: add support for ipTIME A3
ipTIME A3 is a 2.4/5GHz band AC1200 router, based on MediaTek
MT7628AN.
Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7612EN
- Ethernet: 3x 10/100Mbps
- Switch: SoC internal
- UART:
- J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 8af534dbc2..49284f562d 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -376,6 +376,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch1" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; + iptime,a3) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "0:wan" "6@eth0" + ;; lava,lr-25g001|\ sitecom,wlr-6000|\ trendnet,tew-691gr|\ @@ -666,6 +670,7 @@ ramips_setup_macs() trendnet,tew-692gr) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) ;; + iptime,a3|\ iptime,a604m) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) ;; |