diff options
author | Ivaylo Ivanov <iivailo@mail.bg> | 2022-08-25 09:10:13 +0300 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-11-13 22:36:06 +0100 |
commit | 6afc355b2e120ff2701cc9aca66af19c6a0aeca2 (patch) | |
tree | 296666a47e97a1bae592e3461c471bcc48655ee7 /target/linux/ramips/mt7621 | |
parent | 794d1645b3d4e6735b4a749f39cfeaa05f60b101 (diff) | |
download | openwrt-6afc355b2e120ff2701cc9aca66af19c6a0aeca2.tar.gz openwrt-6afc355b2e120ff2701cc9aca66af19c6a0aeca2.tar.bz2 openwrt-6afc355b2e120ff2701cc9aca66af19c6a0aeca2.zip |
ramips: Add support for D-Link DIR-3060 A1
Hardware specification:
SoC: MediaTek MT7621AT
Flash: Winbond W29N01HVSINA 128MB
RAM: Micron MT41K128M16JT-125 256MB
Ethernet: 4x 10/100/1000 Mbps
WiFi1: MT7615DN 2.4GHz N 2x2:2
WiFi2: MT7615DN 5GHz AC 2x2:2
WiFi3: MT7615N 5GHz AC 4x4:4
Button: WPS, Reset
Flash instructions:
OpenWrt can be installed via D-Link Recovery GUI:
Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable.
Give it ~30 seconds, to boot the recovery mode GUI
Connect your client computer to LAN1 of the device
Set your client IP address manually to 192.168.0.2 / 255.255.255.0.
Call the recovery page for the device at http://192.168.0.1/
Use the provided emergency web GUI to upload and flash a new firmware to the device
Signed-off-by: Ivaylo Ivanov <iivailo@mail.bg>
Diffstat (limited to 'target/linux/ramips/mt7621')
-rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 4 | ||||
-rwxr-xr-x | target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh | 1 |
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 98db9fb9fc..9bac8228a0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -55,6 +55,10 @@ dlink,dir-2640-a1|\ dlink,dir-2660-a1) ucidef_set_led_netdev "wan" "wan" "white:net" "wan" ;; +dlink,dir-3060-a1) + ucidef_set_led_netdev "net_white" "WAN Link" "white:net" "wan" "link" + ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:net" "wan" "tx rx" + ;; dlink,dir-853-a3) ucidef_set_led_netdev "wan" "wan" "blue:net" "wan" ;; diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 95bba16194..06a35077dc 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -62,6 +62,7 @@ platform_do_upgrade() { dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ + dlink,dir-3060-a1|\ dlink,dir-853-a3|\ h3c,tx1800-plus|\ h3c,tx1801-plus|\ |