diff options
| author | Robinson Wu <wurobinson@qq.com> | 2020-07-17 15:32:53 +0800 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-31 11:40:15 +0200 |
| commit | 84cb0f7ace73fad15e29e1d74c469b37f90b334d (patch) | |
| tree | 544e0b4abf8f349606bdad031044467270428f76 /target/linux/ramips/mt76x8 | |
| parent | ced167d72971e125825941dae22aad1d318c9dd2 (diff) | |
| download | openwrt-84cb0f7ace73fad15e29e1d74c469b37f90b334d.tar.gz openwrt-84cb0f7ace73fad15e29e1d74c469b37f90b334d.tar.bz2 openwrt-84cb0f7ace73fad15e29e1d74c469b37f90b334d.zip | |
ramips: add support for JS76x8 series DEV boards
This commit adds support for the Jotale JS76x8 series development boards.
These devices have the following specifications:
- SOC: MT7628AN/NN, MT7688AN, MT7628DAN
- RAM of MT7628AN/NN and MT7688AN: 64/128/256 MB (DDR2)
- RAM of MT7628DAN: 64 MB (DDR2)
- FLASH:8/16/32 MB (SPI NOR)
- Ethernet:3x 10/100 Mbps ethernet ports (MT76x8 built-in switch)
- WIFI:1x 2T2R 2.4 GHz Wi-Fi
- LEDs:1x system status green LED, 1x wifi green LED,
3x ethernet green LED
- Buttons:1x reset button
- 1x microSD slot
- 4x USB 2.0 port
- 1x mini-usb debug UART
- 1x DC jack for main power (DC 5V)
- 1x TTL/RS232 UART
- 1x TTL/RS485 UART
- 13x GPIO header
- 1x audio codec(wm8960)
Installation via OpenWrt:
The original firmware is OpenWrt, so both LuCI and sysupgrade can be used.
Installation via U-boot web:
1. Power on board with reset button pressed, release it
after wifi led start blinking.
2. Setup static IP 192.168.1.123/4 on your PC.
3. Go to 192.168.1.8 in browser and upload "sysupgrade" image.
Installation via U-boot tftp:
1. Connect to serial console at the mini usb, which has been connected to UART0
on board (115200 8N1)
2. Setup static IP 192.168.1.123/4 on your PC.
3. Place openwrt-firmware.bin on your PC tftp server (192.168.1.123).
3. Connect one of LAN ports on board to your PC.
4. Start terminal software (e.g. screen /dev/ttyUSB0 115200) on PC.
5. Apply power to board.
6. Interrupt U-boot with keypress of "2".
7. At u-boot prompts:
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) Y
Input device IP (192.168.1.8) ==:192.168.1.8
Input server IP (192.168.1.123) ==:192.168.1.123
Input Linux Kernel filename (root_uImage) ==:openwrt-firmware.bin
8. board will download file from tftp server, write it to flash and reboot.
Signed-off-by: Robinson Wu <wurobinson@qq.com>
[add license to DTS files, fix state_default and reduce to the mimimum,
move phy0tpt trigger to DTS, drop ucidef_set_led_timer, fix network ports]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt76x8')
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 0809109c13..cf7e88ebf1 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -92,6 +92,12 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; + jotale,js76x8-8m|\ + jotale,js76x8-16m|\ + jotale,js76x8-32m) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "6@eth0" + ;; netgear,r6020|\ netgear,r6080|\ netgear,r6120) @@ -174,6 +180,13 @@ ramips_setup_macs() totolink,a3) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) ;; + jotale,js76x8-8m|\ + jotale,js76x8-16m|\ + jotale,js76x8-32m|\ + skylab,skw92a|\ + totolink,lr1200) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; mediatek,linkit-smart-7688|\ onion,omega2|\ onion,omega2p) @@ -189,10 +202,6 @@ ramips_setup_macs() wiznet,wizfi630s) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1) ;; - skylab,skw92a|\ - totolink,lr1200) - wan_mac=$(mtd_get_mac_binary factory 0x2e) - ;; tplink,archer-c20-v4|\ tplink,archer-c50-v3|\ tplink,tl-mr3420-v5|\ |