diff options
author | Christian Lamparter <chunkeey@gmail.com> | 2023-03-13 22:49:50 +0100 |
---|---|---|
committer | Christian Lamparter <chunkeey@gmail.com> | 2023-03-26 16:39:37 +0200 |
commit | c2d1c32d1ef7f2797aa424a6c94d143e9ddaddc8 (patch) | |
tree | 87ee68dd4535c3599e603752dbb1700ccf5f60d6 /target | |
parent | 4ca858f1a082414bf7ace719c1b61ae54fd8e015 (diff) | |
download | openwrt-c2d1c32d1ef7f2797aa424a6c94d143e9ddaddc8.tar.gz openwrt-c2d1c32d1ef7f2797aa424a6c94d143e9ddaddc8.tar.bz2 openwrt-c2d1c32d1ef7f2797aa424a6c94d143e9ddaddc8.zip |
lantiq: xrx200: convert FritzBox 7360v2's wifi to nvmem
this was thoroughly tested (warm and cold boots). on a
real 7360v2. This is because there have been documented
hick-ups with other lantiq devices that need the
owl-loader too.
It's likely that the 7360(sl) could be converted in the
same way as well. However the 7362sl uses a reversed
caldata format, so the "qca,no-eeprom" stays in place.
The patch also moves the urloader nvmem partition
definition into the partition section.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target')
3 files changed, 18 insertions, 11 deletions
diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts index 063d6dca5e..a30746cde2 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts @@ -42,6 +42,18 @@ label = "urlader"; reg = <0x00000 0x20000>; read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + cal_urlader_985: cal@985 { + reg = <0x985 0x440>; + }; + + macaddr_urlader_a91: macaddr@a91 { + reg = <0xa91 0x6>; + }; }; partition@20000 { @@ -78,12 +90,8 @@ reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; -&urlader { - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_urlader_a91: macaddr@a91 { - reg = <0xa91 0x6>; - }; +&wifi { + /delete-property/ qca,no-eeprom; + nvmem-cells = <&cal_urlader_985>; + nvmem-cell-names = "calibration"; }; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi index 73f6e152bf..7324127d2a 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -151,7 +151,7 @@ #address-cells = <2>; device_type = "pci"; - wifi@168c,002e { + wifi: wifi@168c,002e { compatible = "pci168c,002e"; reg = <0 0 0 0 0>; qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index c6bacb8d3c..eefc39b30b 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -19,8 +19,7 @@ case "$FIRMWARE" in avm,fritz3390) caldata_extract_reverse "urlader" 0x2546 0x440 ;; - avm,fritz7360sl|\ - avm,fritz7360-v2) + avm,fritz7360sl) caldata_extract "urlader" 0x985 0x1000 ;; avm,fritz7412|\ |