ipq806x: add LEDs definition for non-standard qca8k LEDs

Add LEDs definition for devices that use a non-standard qca8k LEDs
configuration.

This is to restore original setup of the LED and be on par with swconfig
old configuration.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

3 files changed, 219 insertions, 0 deletions

diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index 950b7ad968..0b64bbb420 100644
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -9,6 +9,18 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+askey,rt4230w-rev6)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "qca8k-0.0:00:green:wan" "wan" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "qca8k-0.0:00:amber:wan" "wan" "tx rx"
+	ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "qca8k-0.0:01:green:lan" "lan1" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "qca8k-0.0:01:amber:lan" "lan1" "tx rx"
+	ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "qca8k-0.0:02:green:lan" "lan2" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "qca8k-0.0:02:amber:lan" "lan2" "tx rx"
+	ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "qca8k-0.0:03:green:lan" "lan3" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "qca8k-0.0:03:amber:lan" "lan3" "tx rx"
+	ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "qca8k-0.0:04:green:lan" "lan4" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "qca8k-0.0:04:amber:lan" "lan4" "tx rx"
+	;;
 buffalo,wxr-2533dhp)
 	ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt"
 	ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
@@ -32,6 +44,21 @@ nec,wg2600hp)
 	;;
 nec,wg2600hp3)
 	ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
+	ucidef_set_led_netdev "wan-port-10" "WAN-PORT-10" "qca8k-0.0:00:green:wan-1" "wan" "tx rx link-10"
+	ucidef_set_led_netdev "wan-port-100" "WAN-PORT-100" "qca8k-0.0:00:green:wan-2" "wan" "tx rx link-100"
+	ucidef_set_led_netdev "wan-port-1000" "WAN-PORT-1000" "qca8k-0.0:00:green:wan-3" "wan" "tx rx link-1000"
+	ucidef_set_led_netdev "lan1-port-10" "LAN1-PORT-10" "qca8k-0.0:01:green:lan-1" "lan1" "tx rx link-10"
+	ucidef_set_led_netdev "lan1-port-100" "LAN1-PORT-100" "qca8k-0.0:01:green:lan-2" "lan1" "tx rx link-100"
+	ucidef_set_led_netdev "lan1-port-1000" "LAN1-PORT-1000" "qca8k-0.0:01:green:lan-3" "lan1" "tx rx link-1000"
+	ucidef_set_led_netdev "lan2-port-10" "LAN2-PORT-10" "qca8k-0.0:02:green:lan-1" "lan2" "tx rx link-10"
+	ucidef_set_led_netdev "lan2-port-100" "LAN2-PORT-100" "qca8k-0.0:02:green:lan-2" "lan2" "tx rx link-100"
+	ucidef_set_led_netdev "lan2-port-1000" "LAN2-PORT-1000" "qca8k-0.0:02:green:lan-3" "lan2" "tx rx link-1000"
+	ucidef_set_led_netdev "lan3-port-10" "LAN3-PORT-10" "qca8k-0.0:03:green:lan-1" "lan3" "tx rx link-10"
+	ucidef_set_led_netdev "lan3-port-100" "LAN3-PORT-100" "qca8k-0.0:03:green:lan-2" "lan3" "tx rx link-100"
+	ucidef_set_led_netdev "lan3-port-1000" "LAN3-PORT-1000" "qca8k-0.0:03:green:lan-3" "lan3" "tx rx link-1000"
+	ucidef_set_led_netdev "lan4-port-10" "LAN4-PORT-10" "qca8k-0.0:04:green:lan-1" "lan4" "tx rx link-10"
+	ucidef_set_led_netdev "lan4-port-100" "LAN4-PORT-100" "qca8k-0.0:04:green:lan-2" "lan4" "tx rx link-100"
+	ucidef_set_led_netdev "lan4-port-1000" "LAN4-PORT-1000" "qca8k-0.0:04:green:lan-3" "lan4" "tx rx link-1000"
 	;;
 netgear,d7800 |\
 netgear,r7500 |\
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
index 5f78d91b9e..2c181bd883 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts
@@ -2,6 +2,7 @@
 
 #include "qcom-ipq8062-smb208.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "NEC Platforms Aterm WG2600HP3";
@@ -441,6 +442,25 @@
 				label = "wan";
 				phy-mode = "internal";
 				phy-handle = <&phy_port1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@2 {
@@ -448,6 +468,25 @@
 				label = "lan1";
 				phy-mode = "internal";
 				phy-handle = <&phy_port2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@3 {
@@ -455,6 +494,25 @@
 				label = "lan2";
 				phy-mode = "internal";
 				phy-handle = <&phy_port3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@4 {
@@ -462,6 +520,25 @@
 				label = "lan3";
 				phy-mode = "internal";
 				phy-handle = <&phy_port4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@5 {
@@ -469,6 +546,25 @@
 				label = "lan4";
 				phy-mode = "internal";
 				phy-handle = <&phy_port5>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@6 {
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
index 6bf2cfe128..5453f9fcb3 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts
@@ -2,6 +2,7 @@
 
 #include "qcom-ipq8065-smb208.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Askey RT4230W REV6";
@@ -326,6 +327,25 @@
 				label = "wan";
 				phy-mode = "internal";
 				phy-handle = <&phy_port1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@2 {
@@ -333,6 +353,25 @@
 				label = "lan1";
 				phy-mode = "internal";
 				phy-handle = <&phy_port2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@3 {
@@ -340,6 +379,25 @@
 				label = "lan2";
 				phy-mode = "internal";
 				phy-handle = <&phy_port3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@4 {
@@ -347,6 +405,25 @@
 				label = "lan3";
 				phy-mode = "internal";
 				phy-handle = <&phy_port4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@5 {
@@ -354,6 +431,25 @@
 				label = "lan4";
 				phy-mode = "internal";
 				phy-handle = <&phy_port5>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@6 {