diff options
Diffstat (limited to 'openwrt/scripts/flash.sh')
| -rw-r--r-- | openwrt/scripts/flash.sh | 66 |
1 files changed, 0 insertions, 66 deletions
diff --git a/openwrt/scripts/flash.sh b/openwrt/scripts/flash.sh deleted file mode 100644 index 8841c35684..0000000000 --- a/openwrt/scripts/flash.sh +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/bash -# -# tftp flash script for wireless routers -# -# Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su> -# Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org> -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# - -if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then - echo Usage: $0 firmware vendor -cat << EOF -IMPORTANT: -Notes for Linksys / Asus WL500gx router: - be sure you have set boot_wait to yes. Power on your router - after executing this script. - -Notes for Asus WL500g router: - be sure POWER led is flashing (If this is not the case - poweroff the device, push the reset button & power on - it again, then release button) - -1) connect your pc to the LAN port -2) be sure your link is up and has an address in the - 192.168.1.0/24 address range (and not the 192.168.1.1) - -Notes for Toshiba router: - boot_wait is enabled by default on these units. - -1) connect your pc to any of the four LAN ports -2) be sure your link is up and has an address in the - 192.168.10.1/24 address range (and not the 192.168.10.1) -3) run this script (unit will only accept .trx images) -4) Turn unit power on. - -EOF - exit 0 -fi -if [ "$2" == "asus" ]; then -echo Confirming IP address setting... -echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 -echo Flashing 192.168.1.1 using $1... -echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 -echo Please wait until leds stops flashing. -elif [ "$2" == "linksys" ]; then -echo Flashing 192.168.1.1 using $1... -echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1 -echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1. -elif [ "$2" == "toshiba" ]; then -echo Flashing 192.168.10.1 using $1... -echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1 -echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1. -fi |