diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c | 349 |
1 files changed, 0 insertions, 349 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c deleted file mode 100644 index 53c539f85a..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * TP-LINK Archer C5/C7/TL-WDR4900 v2 board support - * - * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> - * Copyright (c) 2014 施康成 <tenninjas@tenninjas.ca> - * Copyright (c) 2014 Imre Kaloz <kaloz@openwrt.org> - * - * Based on the Qualcomm Atheros AP135/AP136 reference board support code - * Copyright (c) 2012 Qualcomm Atheros - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-ap9x-pci.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" -#include "pci.h" - -#define ARCHER_C7_GPIO_LED_WLAN2G 12 -#define ARCHER_C7_GPIO_LED_SYSTEM 14 -#define ARCHER_C7_GPIO_LED_QSS 15 -#define ARCHER_C7_GPIO_LED_WLAN5G 17 -#define ARCHER_C7_GPIO_LED_USB1 18 -#define ARCHER_C7_GPIO_LED_USB2 19 - -#define ARCHER_C7_GPIO_BTN_RFKILL 23 -#define ARCHER_C7_V2_GPIO_BTN_RFKILL 23 -#define ARCHER_C7_GPIO_BTN_RESET 16 - -#define ARCHER_C7_GPIO_USB1_POWER 22 -#define ARCHER_C7_GPIO_USB2_POWER 21 - -#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */ -#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL) - -#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000 -#define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000 - -static const char *archer_c7_part_probes[] = { - "tp-link", - NULL, -}; - -static struct flash_platform_data archer_c7_flash_data = { - .part_probes = archer_c7_part_probes, -}; - -static struct gpio_led archer_c7_leds_gpio[] __initdata = { - { - .name = "tp-link:green:qss", - .gpio = ARCHER_C7_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:green:system", - .gpio = ARCHER_C7_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan2g", - .gpio = ARCHER_C7_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "tp-link:green:wlan5g", - .gpio = ARCHER_C7_GPIO_LED_WLAN5G, - .active_low = 1, - }, - { - .name = "tp-link:green:usb1", - .gpio = ARCHER_C7_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "tp-link:green:usb2", - .gpio = ARCHER_C7_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_led wdr4900_leds_gpio[] __initdata = { - { - .name = "tp-link:blue:qss", - .gpio = ARCHER_C7_GPIO_LED_QSS, - .active_low = 1, - }, - { - .name = "tp-link:blue:system", - .gpio = ARCHER_C7_GPIO_LED_SYSTEM, - .active_low = 1, - }, - { - .name = "tp-link:blue:wlan2g", - .gpio = ARCHER_C7_GPIO_LED_WLAN2G, - .active_low = 1, - }, - { - .name = "tp-link:green:usb1", - .gpio = ARCHER_C7_GPIO_LED_USB1, - .active_low = 1, - }, - { - .name = "tp-link:green:usb2", - .gpio = ARCHER_C7_GPIO_LED_USB2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RFKILL, - }, -}; - -static struct gpio_keys_button archer_c7_v2_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_V2_GPIO_BTN_RFKILL, - }, -}; - -static struct gpio_keys_button wdr4900_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARCHER_C7_GPIO_BTN_RESET, - .active_low = 1, - }, -}; - -static const struct ar8327_led_info archer_c7_leds_ar8327[] = { - AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"), - AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"), - AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"), - AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"), - AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"), -}; - -/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ -static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_SGMII, - .sgmii_delay_en = true, -}; - -/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ -static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = { - .led_ctrl0 = 0xc737c737, - .led_ctrl1 = 0x00000000, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x0030c300, - .open_drain = false, -}; - -static struct ar8327_platform_data archer_c7_ar8327_data = { - .pad0_cfg = &archer_c7_ar8327_pad0_cfg, - .pad6_cfg = &archer_c7_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .port6_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &archer_c7_ar8327_led_cfg, - .num_leds = ARRAY_SIZE(archer_c7_leds_ar8327), - .leds = archer_c7_leds_ar8327, -}; - -static struct mdio_board_info archer_c7_mdio0_info[] = { - { - .bus_id = "ag71xx-mdio.0", - .mdio_addr = 0, - .platform_data = &archer_c7_ar8327_data, - }, -}; - -static void __init common_setup(bool pcie_slot) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - u8 tmpmac[ETH_ALEN]; - u8 tmpmac2[ETH_ALEN]; - - ath79_register_m25p80(&archer_c7_flash_data); - - if (pcie_slot) { - ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac); - ath79_register_pci(); - } else { - ath79_init_mac(tmpmac, mac, -1); - ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac); - - ath79_init_mac(tmpmac2, mac, -2); - ap9x_pci_setup_wmac_led_pin(0, 0); - ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac2); - } - - mdiobus_register_board_info(archer_c7_mdio0_info, - ARRAY_SIZE(archer_c7_mdio0_info)); - ath79_register_mdio(0, 0x0); - - ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - - /* GMAC0 is connected to the RMGII interface */ - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ath79_eth0_data.phy_mask = BIT(0); - ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; - ath79_eth0_pll_data.pll_1000 = 0x56000000; - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); - ath79_register_eth(0); - - /* GMAC1 is connected to the SGMII interface */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; - ath79_eth1_data.speed = SPEED_1000; - ath79_eth1_data.duplex = DUPLEX_FULL; - ath79_eth1_pll_data.pll_1000 = 0x03000101; - - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); - ath79_register_eth(1); - - gpio_request_one(ARCHER_C7_GPIO_USB1_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB1 power"); - gpio_request_one(ARCHER_C7_GPIO_USB2_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB2 power"); - ath79_register_usb(); -} - -static void __init archer_c5_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_gpio_keys), - archer_c7_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), - archer_c7_leds_gpio); - common_setup(true); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5", - archer_c5_setup); - -static void __init archer_c7_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_gpio_keys), - archer_c7_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), - archer_c7_leds_gpio); - common_setup(true); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7", - archer_c7_setup); - -static void __init archer_c7_v2_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(archer_c7_v2_gpio_keys), - archer_c7_v2_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio), - archer_c7_leds_gpio); - common_setup(true); -} - -MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V2, "ARCHER-C7-V2", "TP-LINK Archer C7", - archer_c7_v2_setup); - -static void __init tl_wdr4900_v2_setup(void) -{ - ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wdr4900_gpio_keys), - wdr4900_gpio_keys); - ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4900_leds_gpio), - wdr4900_leds_gpio); - common_setup(false); -} - -MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2", - tl_wdr4900_v2_setup) - |