diff options
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c deleted file mode 100644 index 8d7c6112d7..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * BHU BXU2000n-2 A1 board support - * - * Copyright (C) 2013 Terry Yang <yangbo@bhunetworks.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> - -#include "common.h" -#include "dev-eth.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-m25p80.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "machtypes.h" - -#define BHU_BXU2000N2_A1_GPIO_LED_WLAN 13 -#define BHU_BXU2000N2_A1_GPIO_LED_WAN 19 -#define BHU_BXU2000N2_A1_GPIO_LED_LAN 21 -#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM 14 - -#define BHU_BXU2000N2_A1_GPIO_BTN_RESET 17 - -#define BHU_BXU2000N2_KEYS_POLL_INTERVAL 20 /* msecs */ -#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL \ - (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL) - -static const char *bhu_bxu2000n2_part_probes[] = { - "cmdlinepart", - NULL, -}; - -static struct flash_platform_data bhu_bxu2000n2_flash_data = { - .part_probes = bhu_bxu2000n2_part_probes, -}; - -static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = { - { - .name = "bhu:green:status", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "bhu:green:lan", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_LAN, - .active_low = 1, - }, { - .name = "bhu:green:wan", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_WAN, - .active_low = 1, - }, { - .name = "bhu:green:wlan", - .gpio = BHU_BXU2000N2_A1_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL, - .gpio = BHU_BXU2000N2_A1_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static void __init bhu_ap123_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - ath79_register_m25p80(&bhu_bxu2000n2_flash_data); - - ath79_register_mdio(1, 0x0); - - ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); - - /* GMAC0 is connected to the PHY4 of the internal switch */ - ath79_switch_data.phy4_mii_en = 1; - ath79_switch_data.phy_poll_mask = BIT(4); - ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; - ath79_eth0_data.phy_mask = BIT(4); - ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; - ath79_register_eth(0); - - /* GMAC1 is connected to the internal switch. Only use PHY3 */ - ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; - ath79_eth1_data.phy_mask = BIT(3); - ath79_register_eth(1); - - ath79_register_wmac(ee, ee+2); -} - -static void __init bhu_bxu2000n2_a1_setup(void) -{ - bhu_ap123_setup(); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio), - bhu_bxu2000n2_a1_leds_gpio); - - ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys), - bhu_bxu2000n2_a1_gpio_keys); -} - -MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1", - "BHU BXU2000n-2 rev. A1", - bhu_bxu2000n2_a1_setup); - |