1 files changed, 0 insertions, 101 deletions
diff --git a/target/linux/bcm27xx/patches-6.1/950-0570-overlays-Remove-lirc-rpi-from-media-center.patch b/target/linux/bcm27xx/patches-6.1/950-0570-overlays-Remove-lirc-rpi-from-media-center.patch
deleted file mode 100644
index 0f2db63d24..0000000000
--- a/target/linux/bcm27xx/patches-6.1/950-0570-overlays-Remove-lirc-rpi-from-media-center.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 1ec1688fcb2ecc8a4bf865b6f61d65bf8410a157 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.com>
-Date: Mon, 6 Mar 2023 16:34:39 +0000
-Subject: [PATCH] overlays: Remove lirc-rpi from media-center
-
-lirc-rpi was retired years ago, suggesting that this overlay is not
-being used. Before deleting outright, remove the lirc-rpi element.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.com>
----
- arch/arm/boot/dts/overlays/README             | 12 -----
- .../dts/overlays/media-center-overlay.dts     | 50 +------------------
- 2 files changed, 1 insertion(+), 61 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -2774,18 +2774,6 @@ Params: speed                   Display
-         xohms                   Touchpanel sensitivity (X-plate resistance)
-         swapxy                  Swap x and y axis
-         backlight               Change backlight GPIO pin {e.g. 12, 18}
--        gpio_out_pin            GPIO for output (default "17")
--        gpio_in_pin             GPIO for input (default "18")
--        gpio_in_pull            Pull up/down/off on the input pin
--                                (default "down")
--        sense                   Override the IR receive auto-detection logic:
--                                 "0" = force active-high
--                                 "1" = force active-low
--                                 "-1" = use auto-detection
--                                (default "-1")
--        softcarrier             Turn the software carrier "on" or "off"
--                                (default "on")
--        invert                  "on" = invert the output pin (default "off")
-         debug                   "on" = enable additional debug messages
-                                 (default "off")
- 
---- a/arch/arm/boot/dts/overlays/media-center-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/media-center-overlay.dts
-@@ -73,62 +73,14 @@
- 		};
- 	};
- 
--	fragment@4 {
--		target-path = "/";
--		__overlay__ {
--			lirc_rpi: lirc_rpi {
--				compatible = "rpi,lirc-rpi";
--				pinctrl-names = "default";
--				pinctrl-0 = <&lirc_pins>;
--				status = "okay";
--
--				// Override autodetection of IR receiver circuit
--				// (0 = active high, 1 = active low, -1 = no override )
--				rpi,sense = <0xffffffff>;
--
--				// Software carrier
--				// (0 = off, 1 = on)
--				rpi,softcarrier = <1>;
--
--				// Invert output
--				// (0 = off, 1 = on)
--				rpi,invert = <0>;
--
--				// Enable debugging messages
--				// (0 = off, 1 = on)
--				rpi,debug = <0>;
--			};
--		};
--	};
--
--	fragment@5 {
--		target = <&gpio>;
--		__overlay__ {
--			lirc_pins: lirc_pins {
--				brcm,pins = <6 5>;
--				brcm,function = <1 0>; // out in
--				brcm,pull = <0 1>; // off down
--			};
--		};
--	};
--
- 	__overrides__ {
- 		speed =     <&rpidisplay>,"spi-max-frequency:0";
- 		rotate =    <&rpidisplay>,"rotate:0";
- 		fps =       <&rpidisplay>,"fps:0";
--		debug =     <&rpidisplay>,"debug:0", 
--		            <&lirc_rpi>,"rpi,debug:0";
-+		debug =     <&rpidisplay>,"debug:0";
- 		xohms =     <&rpidisplay_ts>,"ti,x-plate-ohms;0";
- 		swapxy =    <&rpidisplay_ts>,"ti,swap-xy?";
- 		backlight = <&rpidisplay>,"led-gpios:4",
- 		            <&rpi_display_pins>,"brcm,pins:0";
--
--		gpio_out_pin =  <&lirc_pins>,"brcm,pins:0";
--		gpio_in_pin =   <&lirc_pins>,"brcm,pins:4";
--		gpio_in_pull =  <&lirc_pins>,"brcm,pull:4";
--
--		sense =         <&lirc_rpi>,"rpi,sense:0";
--		softcarrier =   <&lirc_rpi>,"rpi,softcarrier:0";
--		invert =        <&lirc_rpi>,"rpi,invert:0";
- 	};
- };