summaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-6.1/950-1186-dts-bcm2712-put-usb-under-axi-not-soc.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/bcm27xx/patches-6.1/950-1186-dts-bcm2712-put-usb-under-axi-not-soc.patch')
-rw-r--r--target/linux/bcm27xx/patches-6.1/950-1186-dts-bcm2712-put-usb-under-axi-not-soc.patch59
1 files changed, 0 insertions, 59 deletions
diff --git a/target/linux/bcm27xx/patches-6.1/950-1186-dts-bcm2712-put-usb-under-axi-not-soc.patch b/target/linux/bcm27xx/patches-6.1/950-1186-dts-bcm2712-put-usb-under-axi-not-soc.patch
deleted file mode 100644
index b66265f5a1..0000000000
--- a/target/linux/bcm27xx/patches-6.1/950-1186-dts-bcm2712-put-usb-under-axi-not-soc.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 82069a7a02632aa60fa5c69415bf891ede7d6fd4 Mon Sep 17 00:00:00 2001
-From: Jonathan Bell <jonathan@raspberrypi.com>
-Date: Tue, 5 Dec 2023 16:55:17 +0000
-Subject: [PATCH] dts: bcm2712: put usb under /axi not /soc
-
-On 2712, the DWC USB controller is no longer attached to the Videocore
-30-bit bus with its associated aliases, and can see the bottom 4GB of
-RAM directly.
-
-Ideally it should make use of IOMMU6 but for now software bounce buffers
-get it working.
-
-Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
----
- arch/arm/boot/dts/bcm2712.dtsi | 26 +++++++++++++-------------
- 1 file changed, 13 insertions(+), 13 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2712.dtsi
-+++ b/arch/arm/boot/dts/bcm2712.dtsi
-@@ -133,19 +133,6 @@
- status = "disabled";
- };
-
-- usb: usb@7c480000 {
-- compatible = "brcm,bcm2835-usb";
-- reg = <0x7c480000 0x10000>;
-- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks = <&clk_usb>;
-- clock-names = "otg";
-- phys = <&usbphy>;
-- phy-names = "usb2-phy";
-- status = "disabled";
-- };
--
- mop: mop@7c500000 {
- compatible = "brcm,bcm2712-mop";
- reg = <0x7c500000 0x20>;
-@@ -1145,6 +1132,19 @@
- reg = <0x10 0x00400018 0x0 0x18>;
- };
-
-+ usb: usb@480000 {
-+ compatible = "brcm,bcm2835-usb";
-+ reg = <0x10 0x00480000 0x0 0x10000>;
-+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ clocks = <&clk_usb>;
-+ clock-names = "otg";
-+ phys = <&usbphy>;
-+ phy-names = "usb2-phy";
-+ status = "disabled";
-+ };
-+
- rpivid: codec@800000 {
- compatible = "raspberrypi,rpivid-vid-decoder";
- reg = <0x10 0x00800000 0x0 0x10000>, /* HEVC */