diff options
Diffstat (limited to 'target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts')
-rw-r--r-- | target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts | 454 |
1 files changed, 0 insertions, 454 deletions
diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts deleted file mode 100644 index 54353cac58..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts +++ /dev/null @@ -1,454 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ZTE MF282Plus"; - compatible = "zte,mf282plus"; - - aliases { - led-boot = &led_internal; - led-failsafe = &led_internal; - led-running = &led_internal; - led-upgrade = &led_internal; - }; - - chosen { - /* - * bootargs forced by u-boot bootipq command: - * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' - */ - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - modem { - gpio-export,name = "modem-reset"; - gpio-export,output = <0>; - gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_internal: led-0 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - label = "blue:internal_led"; - default-state = "keep"; - }; - - led-1 { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wifi { - label = "wifi"; - linux,code = <KEY_RFKILL>; - gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* u-boot is looking for "n25q128a11" property */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0 0>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "ART"; - reg = <0xa0000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@120000 { - label = "mac"; - reg = <0x120000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_config_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1a0000 { - label = "reserved2"; - reg = <0x1a0000 0xc0000>; - read-only; - }; - - partition@260000 { - label = "cfg-param"; - reg = <0x260000 0x400000>; - read-only; - }; - - partition@660000 { - label = "log"; - reg = <0x660000 0x400000>; - }; - - partition@a60000 { - label = "oops"; - reg = <0xa60000 0xa0000>; - }; - - partition@b00000 { - label = "reserved3"; - reg = <0xb00000 0x500000>; - read-only; - }; - - partition@1000000 { - label = "web"; - reg = <0x1000000 0x800000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0x1d00000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x2800000>; - }; - - partition@7600000 { - label = "extra-cfg"; - reg = <0x7600000 0xa00000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -/* - * The MD5 sum of the board file of the MF286D is identical to the board - * file in the OEM firmware - */ -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 1>; - qcom,ath10k-calibration-variant = "zte,mf286d"; -}; - -/* - * The MD5 sum of the board file of the MF286D is identical to the board - * file in the OEM firmware - */ -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_config_0 1>; - qcom,ath10k-calibration-variant = "zte,mf286d"; -}; |