diff options
Diffstat (limited to 'target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts')
-rw-r--r-- | target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts | 451 |
1 files changed, 0 insertions, 451 deletions
diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts deleted file mode 100644 index f2e39c87ae..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2016, 2018 The Linux Foundation. All rights reserved. - * Copyright (c) 2016 Google, Inc - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Google WiFi (Gale)"; - compatible = "google,wifi", "google,gale-v2", "qcom,ipq4019"; - - aliases { - label-mac-device = &gmac0; - led-boot = &led0_blue; - led-failsafe = &led0_red; - led-running = &led0_blue; - led-upgrade = &led0_red; - }; - - chosen { - /* - * rootwait: in case we're booting from slow/async USB storage. - */ - bootargs-append = " rootwait"; - stdout-path = &blsp1_uart1; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512MB */ - }; - - soc { - edma@c080000 { - /* - * Factory bootloader (depthcharge) will fail to boot - * if this exact path (soc/edma@c080000/gmac0) doesn't - * exist. - */ - gmac0: gmac0 { - }; - - /* - * Factory bootloader (depthcharge) will fail to boot - * if this exact path (soc/edma@c080000/gmac1) doesn't - * exist. - */ - gmac1 { - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&fw_pinmux>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&scm { - qcom,sdi-enabled; -}; - -&tlmm { - fw_pinmux: fw_pinmux { - wp { - pins = "gpio53"; - output-low; - }; - recovery { - pins = "gpio57"; - function = "gpio"; - bias-none; - }; - developer { - pins = "gpio41"; - bias-none; - }; - }; - - reset802_15_4 { - pins = "gpio60"; - }; - - led_reset { - pins = "gpio22"; - output-high; - }; - - sys_reset { - pins = "gpio19"; - output-high; - }; - - rx_active { - pins = "gpio43"; - bias-pull,down; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14","gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14","gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - spi_1_pins: spi_1_pinmux { - pinmux { - function = "blsp_spi1"; - pins = "gpio44", "gpio46","gpio47"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio45"; - }; - pinconf { - pins = "gpio44", "gpio46","gpio47"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio45"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - serial_0_pins: serial0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - drive-open-drain; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - mux { - pins = "gpio34", "gpio35"; - function = "blsp_i2c1"; - drive-open-drain; - }; - }; - - sd_0_pins: sd_0_pinmux { - sd0 { - pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio29", "gpio30", "gpio31", "gpio32"; - function = "sdio"; - drive-strength = <10>; - bias-pull-up; - pull-up-res = <0>; - }; - sdclk { - pins = "gpio27"; - function = "sdio"; - drive-strength = <2>; - bias-pull-up; - pull-up-res = <0>; - }; - sdcmd { - pins = "gpio28"; - function = "sdio"; - drive-strength = <10>; - bias-pull-up; - pull-up-res = <0>; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-disable; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-disable; - }; - mux_3 { - pins = "gpio40"; - function = "gpio"; - bias-disable; - output-high; - }; - }; - - wifi1_1_pins: wifi2_pinmux { - mux { - pins = "gpio58"; - output-low; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - powered-while-suspended; - }; -}; - -&blsp1_i2c4 { - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - -#if 1 - led0_red: led@0 { - reg = <0>; - chan-name = "LED0_Red"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_FAULT; - }; - - led@1 { - reg = <1>; - chan-name = "LED0_Green"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_GREEN>; - }; - - led0_blue: led@2 { - reg = <2>; - chan-name = "LED0_Blue"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - }; -#else - /* - * openwrt isn't ready to handle multi-intensity leds yet - * # echo 255 255 255 > /sys/class/leds/tricolor/multi_intensity - * # echo 255 > /sys/class/leds/tricolor/brightness - */ - multi-led@2 { - function = LED_FUNCTION_POWER; - reg = <2>; - color = <LED_COLOR_ID_RGB>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - chan-name = "tricolor"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - chan-name = "tricolor"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_GREEN>; - }; - - led@2 { - reg = <2>; - chan-name = "tricolor"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_BLUE>; - }; - }; -#endif - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - }; -}; - -&blsp1_spi2 { - pinctrl-0 = <&spi_1_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - - /* - * This "spidev" was included in the manufacturer device tree. I - * suspect it's the (unused; and removed from later HW spins) Zigbee - * radio -- SiliconLabs EM3581 Zigbee? There's no driver or binding for - * this at the moment. - */ - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <24000000>; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -}; - -&prng { - status = "okay"; -}; - -&sdhci { - status = "okay"; - pinctrl-0 = <&sd_0_pins>; - pinctrl-names = "default"; - clock-frequency = <192000000>; - vqmmc-supply = <&vqmmc>; - non-removable; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&vqmmc { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "GO_GALE"; -}; - -&wifi1 { - status = "okay"; - pinctrl-0 = <&wifi1_1_pins>; - pinctrl-names = "default"; - qcom,ath10k-calibration-variant = "GO_GALE"; -}; |