ipq40xx: drop 6.1 support

Drop support for ipq40xx for kernel 6.1.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

1 files changed, 0 insertions, 451 deletions

diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts
deleted file mode 100644
index f2e39c87ae..0000000000
--- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2016, 2018 The Linux Foundation. All rights reserved.
- * Copyright (c) 2016 Google, Inc
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Google WiFi (Gale)";
-	compatible = "google,wifi", "google,gale-v2", "qcom,ipq4019";
-
-	aliases {
-		label-mac-device = &gmac0;
-		led-boot = &led0_blue;
-		led-failsafe = &led0_red;
-		led-running = &led0_blue;
-		led-upgrade = &led0_red;
-	};
-
-	chosen {
-		/*
-		 * rootwait: in case we're booting from slow/async USB storage.
-		 */
-		bootargs-append = " rootwait";
-		stdout-path = &blsp1_uart1;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		edma@c080000 {
-			/*
-			 * Factory bootloader (depthcharge) will fail to boot
-			 * if this exact path (soc/edma@c080000/gmac0) doesn't
-			 * exist.
-			 */
-			gmac0: gmac0 {
-			};
-
-			/*
-			 * Factory bootloader (depthcharge) will fail to boot
-			 * if this exact path (soc/edma@c080000/gmac1) doesn't
-			 * exist.
-			 */
-			gmac1 {
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&fw_pinmux>;
-		pinctrl-names = "default";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&scm {
-	qcom,sdi-enabled;
-};
-
-&tlmm {
-	fw_pinmux: fw_pinmux {
-		wp {
-			pins = "gpio53";
-			output-low;
-		};
-		recovery {
-			pins = "gpio57";
-			function = "gpio";
-			bias-none;
-		};
-		developer {
-			pins = "gpio41";
-			bias-none;
-		};
-	};
-
-	reset802_15_4 {
-		pins = "gpio60";
-	};
-
-	led_reset {
-		pins = "gpio22";
-		output-high;
-	};
-
-	sys_reset {
-		pins = "gpio19";
-		output-high;
-	};
-
-	rx_active {
-		pins = "gpio43";
-		bias-pull,down;
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14","gpio15";
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-		};
-		pinconf {
-			pins = "gpio13", "gpio14","gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf_cs {
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	spi_1_pins: spi_1_pinmux {
-		pinmux {
-			function = "blsp_spi1";
-			pins = "gpio44", "gpio46","gpio47";
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio45";
-		};
-		pinconf {
-			pins = "gpio44", "gpio46","gpio47";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf_cs {
-			pins = "gpio45";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	serial_0_pins: serial0_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	serial_1_pins: serial1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	i2c_0_pins: i2c_0_pinmux {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "blsp_i2c0";
-			drive-open-drain;
-		};
-	};
-
-	i2c_1_pins: i2c_1_pinmux {
-		mux {
-			pins = "gpio34", "gpio35";
-			function = "blsp_i2c1";
-			drive-open-drain;
-		};
-	};
-
-	sd_0_pins: sd_0_pinmux {
-		sd0 {
-			pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio29", "gpio30", "gpio31", "gpio32";
-			function = "sdio";
-			drive-strength = <10>;
-			bias-pull-up;
-			pull-up-res = <0>;
-		};
-		sdclk {
-			pins = "gpio27";
-			function = "sdio";
-			drive-strength = <2>;
-			bias-pull-up;
-			pull-up-res = <0>;
-		};
-		sdcmd {
-			pins = "gpio28";
-			function = "sdio";
-			drive-strength = <10>;
-			bias-pull-up;
-			pull-up-res = <0>;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-disable;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-disable;
-		};
-		mux_3 {
-			pins = "gpio40";
-			function = "gpio";
-			bias-disable;
-			output-high;
-		};
-	};
-
-	wifi1_1_pins: wifi2_pinmux {
-		mux {
-			pins = "gpio58";
-			output-low;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_i2c3 {
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-		powered-while-suspended;
-	};
-};
-
-&blsp1_i2c4 {
-	pinctrl-0 = <&i2c_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	led-controller@32 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "national,lp5523";
-		reg = <0x32>;
-		clock-mode = /bits/ 8 <1>;
-
-#if 1
-		led0_red: led@0 {
-			reg = <0>;
-			chan-name = "LED0_Red";
-			led-cur = /bits/ 8 <0x64>;
-			max-cur = /bits/ 8 <0x78>;
-			color = <LED_COLOR_ID_RED>;
-			function = LED_FUNCTION_FAULT;
-		};
-
-		led@1 {
-			reg = <1>;
-			chan-name = "LED0_Green";
-			led-cur = /bits/ 8 <0x64>;
-			max-cur = /bits/ 8 <0x78>;
-			color = <LED_COLOR_ID_GREEN>;
-		};
-
-		led0_blue: led@2 {
-			reg = <2>;
-			chan-name = "LED0_Blue";
-			led-cur = /bits/ 8 <0x64>;
-			max-cur = /bits/ 8 <0x78>;
-			color = <LED_COLOR_ID_BLUE>;
-			function = LED_FUNCTION_POWER;
-		};
-#else
-		/*
-		 * openwrt isn't ready to handle multi-intensity leds yet
-		 * # echo 255 255 255 > /sys/class/leds/tricolor/multi_intensity
-		 * # echo 255 > /sys/class/leds/tricolor/brightness
-		 */
-		multi-led@2 {
-			function = LED_FUNCTION_POWER;
-			reg = <2>;
-			color = <LED_COLOR_ID_RGB>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@0 {
-				reg = <0>;
-				chan-name = "tricolor";
-				led-cur = /bits/ 8 <0x64>;
-				max-cur = /bits/ 8 <0x78>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				chan-name = "tricolor";
-				led-cur = /bits/ 8 <0x64>;
-				max-cur = /bits/ 8 <0x78>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@2 {
-				reg = <2>;
-				chan-name = "tricolor";
-				led-cur = /bits/ 8 <0x64>;
-				max-cur = /bits/ 8 <0x78>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-#endif
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-	};
-};
-
-&blsp1_spi2 {
-	pinctrl-0 = <&spi_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
-
-	/*
-	 * This "spidev" was included in the manufacturer device tree. I
-	 * suspect it's the (unused; and removed from later HW spins) Zigbee
-	 * radio -- SiliconLabs EM3581 Zigbee? There's no driver or binding for
-	 * this at the moment.
-	 */
-	spidev@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&gmac {
-	status = "okay";
-};
-
-&mdio {
-	status = "okay";
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-};
-
-&prng {
-	status = "okay";
-};
-
-&sdhci {
-	status = "okay";
-	pinctrl-0 = <&sd_0_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <192000000>;
-	vqmmc-supply = <&vqmmc>;
-	non-removable;
-};
-
-&switch {
-	status = "okay";
-};
-
-&swport4 {
-	status = "okay";
-
-	label = "lan";
-};
-
-&swport5 {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&vqmmc {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "GO_GALE";
-};
-
-&wifi1 {
-	status = "okay";
-	pinctrl-0 = <&wifi1_1_pins>;
-	pinctrl-names = "default";
-	qcom,ath10k-calibration-variant = "GO_GALE";
-};