diff options
author | Christian Marangi <ansuelsmth@gmail.com> | 2024-04-26 12:30:26 +0200 |
---|---|---|
committer | Christian Marangi <ansuelsmth@gmail.com> | 2024-04-26 12:30:42 +0200 |
commit | 2d5509f529f25d41064b3a891e6b0d4085808f2a (patch) | |
tree | ab2a14699423b5aad691dc55cec2c94b64eadb28 /target/linux | |
parent | 414646ef6cae8a542f7334f252ae2f40f35148be (diff) | |
download | openwrt-2d5509f529f25d41064b3a891e6b0d4085808f2a.tar.gz openwrt-2d5509f529f25d41064b3a891e6b0d4085808f2a.tar.bz2 openwrt-2d5509f529f25d41064b3a891e6b0d4085808f2a.zip |
ipq40xx: drop 6.1 support
Drop support for ipq40xx for kernel 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Diffstat (limited to 'target/linux')
129 files changed, 0 insertions, 32127 deletions
diff --git a/target/linux/ipq40xx/config-6.1 b/target/linux/ipq40xx/config-6.1 deleted file mode 100644 index f14dd0a474..0000000000 --- a/target/linux/ipq40xx/config-6.1 +++ /dev/null @@ -1,540 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_IPQ40XX=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MSM8909 is not set -# CONFIG_ARCH_MSM8916 is not set -# CONFIG_ARCH_MSM8960 is not set -# CONFIG_ARCH_MSM8974 is not set -# CONFIG_ARCH_MSM8X60 is not set -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_QCOM=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_CPUIDLE=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_QCOM_CPUFREQ_HW is not set -# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set -# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AT803X_PHY=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BCH=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE_PARTITION=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRC8=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y -CONFIG_CRYPTO_BLAKE2S_ARM=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_QCE=y -# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set -CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 -CONFIG_CRYPTO_DEV_QCOM_RNG=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_XTS=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MISC=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_WATCHDOG=y -CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y -CONFIG_GRO_CELLS=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_OPTEE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -# CONFIG_I2C_QCOM_CCI is not set -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -# CONFIG_IPQ_APSS_PLL is not set -CONFIG_IPQ_GCC_4019=y -# CONFIG_IPQ_GCC_6018 is not set -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQSTACKS=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -# CONFIG_KPSS_XCC is not set -# CONFIG_KRAITCC is not set -CONFIG_LED_TRIGGER_PHY=y -CONFIG_LEDS_LP5523=y -CONFIG_LEDS_LP5562=y -CONFIG_LEDS_LP55XX_COMMON=y -CONFIG_LEDS_TLC591XX=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ4019=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -CONFIG_MEMFD_CREATE=y -# CONFIG_MFD_HI6421_SPMI is not set -# CONFIG_MFD_QCOM_RPM is not set -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_CQHCI=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_MSM=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MSM_GCC_8660 is not set -# CONFIG_MSM_GCC_8909 is not set -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8939 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8976 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_MSM_GPUCC_8998 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -# CONFIG_MSM_MMCC_8998 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_BCH=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_QCOM=y -# CONFIG_MTD_QCOMSMEM_PARTS is not set -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_QCA8K_IPQ4019=y -CONFIG_NET_DSA_TAG_OOB=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_NVMEM_QCOM_QFPROM=y -# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set -# CONFIG_NVMEM_SPMI_SDAM is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OPTEE=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -# CONFIG_PHY_QCOM_EDP is not set -CONFIG_PHY_QCOM_IPQ4019_USB=y -# CONFIG_PHY_QCOM_IPQ806X_SATA is not set -# CONFIG_PHY_QCOM_IPQ806X_USB is not set -# CONFIG_PHY_QCOM_PCIE2 is not set -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_USB_HS_28NM is not set -# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set -# CONFIG_PHY_QCOM_USB_SS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -CONFIG_PINCTRL_IPQ4019=y -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8226 is not set -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8909 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -# CONFIG_PINCTRL_SDX65 is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_QCA807X_PHY=y -# CONFIG_QCM_DISPCC_2290 is not set -# CONFIG_QCM_GCC_2290 is not set -CONFIG_QCOM_A53PLL=y -# CONFIG_QCOM_ADM is not set -CONFIG_QCOM_BAM_DMA=y -# CONFIG_QCOM_COMMAND_DB is not set -# CONFIG_QCOM_CPR is not set -# CONFIG_QCOM_EBI2 is not set -# CONFIG_QCOM_GENI_SE is not set -# CONFIG_QCOM_GSBI is not set -# CONFIG_QCOM_HFPLL is not set -# CONFIG_QCOM_ICC_BWMON is not set -# CONFIG_QCOM_IOMMU is not set -CONFIG_QCOM_IPQ4019_ESS_EDMA=y -# CONFIG_QCOM_LLCC is not set -# CONFIG_QCOM_OCMEM is not set -# CONFIG_QCOM_PDC is not set -# CONFIG_QCOM_RMTFS_MEM is not set -# CONFIG_QCOM_RPMH is not set -CONFIG_QCOM_SCM=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMSM is not set -# CONFIG_QCOM_SOCINFO is not set -# CONFIG_QCOM_SPM is not set -# CONFIG_QCOM_STATS is not set -CONFIG_QCOM_TCSR=y -# CONFIG_QCOM_TSENS is not set -CONFIG_QCOM_WDT=y -# CONFIG_QCS_GCC_404 is not set -# CONFIG_QCS_Q6SSTOP_404 is not set -# CONFIG_QCS_TURING_404 is not set -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_QCOM_LABIBB is not set -# CONFIG_REGULATOR_QCOM_SPMI is not set -# CONFIG_REGULATOR_QCOM_USB_VBUS is not set -CONFIG_REGULATOR_VCTRL=y -CONFIG_REGULATOR_VQMMC_IPQ4019=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_QCOM_AOSS is not set -# CONFIG_RESET_QCOM_PDC is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_OPTEE is not set -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -# CONFIG_SC_CAMCC_7280 is not set -# CONFIG_SC_DISPCC_7180 is not set -# CONFIG_SC_GCC_7180 is not set -# CONFIG_SC_GCC_8280XP is not set -# CONFIG_SC_GPUCC_7180 is not set -# CONFIG_SC_LPASSCC_7280 is not set -# CONFIG_SC_LPASS_CORECC_7180 is not set -# CONFIG_SC_LPASS_CORECC_7280 is not set -# CONFIG_SC_MSS_7180 is not set -# CONFIG_SC_VIDEOCC_7180 is not set -# CONFIG_SDM_CAMCC_845 is not set -# CONFIG_SDM_DISPCC_845 is not set -# CONFIG_SDM_GCC_660 is not set -# CONFIG_SDM_GCC_845 is not set -# CONFIG_SDM_GPUCC_845 is not set -# CONFIG_SDM_LPASSCC_845 is not set -# CONFIG_SDM_VIDEOCC_845 is not set -# CONFIG_SDX_GCC_65 is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SGL_ALLOC=y -CONFIG_SKB_EXTENSIONS=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -# CONFIG_SM_CAMCC_8450 is not set -# CONFIG_SM_GCC_8150 is not set -# CONFIG_SM_GCC_8250 is not set -# CONFIG_SM_GCC_8450 is not set -# CONFIG_SM_GPUCC_6350 is not set -# CONFIG_SM_GPUCC_8150 is not set -# CONFIG_SM_GPUCC_8250 is not set -# CONFIG_SM_GPUCC_8350 is not set -# CONFIG_SM_VIDEOCC_8150 is not set -# CONFIG_SM_VIDEOCC_8250 is not set -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -# CONFIG_SPMI_HISI3670 is not set -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_SPMI_PMIC_CLKDIV is not set -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TEE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-a42.dts deleted file mode 100644 index f43c4b8000..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: ISC -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com> - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "OpenMesh A42"; - compatible = "openmesh,a42"; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_green; - label-mac-device = &swport5; - }; - - leds { - compatible = "gpio-leds"; - - status_red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - led_status_green: status_green { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - status_blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - /* partitions are passed via bootloader */ - partitions { - partition-art { - label = "0:ART"; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "ethernet2"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&swport5 { - status = "okay"; - label = "ethernet1"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts deleted file mode 100644 index ceaa1edd45..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ /dev/null @@ -1,359 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "ALFA Network AP120C-AC"; - compatible = "alfa-network,ap120c-ac"; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-running = &status; - led-upgrade = &status; - ethernet1 = &swport5; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - status: status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_AMBER>; - gpios = <ðphy4 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "red:wlan5g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - tpm@29 { - compatible = "atmel,at97sc3204t"; - reg = <0x29>; - }; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 4 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@180000 { - label = "priv_data1"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition@190000 { - label = "priv_data2"; - reg = <0x00190000 0x00010000>; - read-only; - }; - }; - }; - - nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - - partition@4000000 { - label = "rootfs2"; - reg = <0x04000000 0x04000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial0_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -ðphy4 { - gpio-controller; - #gpio-cells = <2>; -}; - -&tlmm { - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial0_pins: serial0_pinmux { - mux_uart { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux_spi { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts deleted file mode 100644 index 388b2dd590..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts +++ /dev/null @@ -1,255 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "MikroTik cAP ac"; - compatible = "mikrotik,cap-ac"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x08000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &led_user; - led-failsafe = &led_user; - led-running = &led_user; - led-upgrade = &led_user; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - mode { - label = "mode"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_LIGHTS_TOGGLE>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - led_user: user { - label = "green:user"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "green:wlan5g"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - eth1 { - label = "green:eth1"; - gpios = <ðphy4 1 GPIO_ACTIVE_HIGH>; - }; - - eth2 { - label = "green:eth2"; - gpios = <ðphy3 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - read-only; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - - partition@100000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x100000 0xf00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -ðphy3 { - gpio-controller; - #gpio-cells = <2>; -}; - -ðphy4 { - gpio-controller; - #gpio-cells = <2>; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-cAP-ac"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-cAP-ac"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts deleted file mode 100644 index c388ceca27..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ /dev/null @@ -1,296 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EZVIZ CS-W3-WD1200G EUP"; - compatible = "ezviz,cs-w3-wd1200g-eup"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_green; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: status_red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - - led_status_green: status_green { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; - }; - - led_status_blue: status_blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition9@580000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - label = "lan3"; -}; - -&swport3 { - status = "okay"; - label = "lan2"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; -}; - -&swport5 { - status = "okay"; - label = "wan"; - nvmem-cells = <&macaddr_art_6>; - nvmem-cell-names = "mac-address"; -}; - -ðphy0 { - status = "disabled"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts deleted file mode 100644 index fef549035d..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "D-Link DAP 2610"; - compatible = "dlink,dap-2610"; - - aliases { - led-boot = &led_red; - led-failsafe = &led_red; - led-running = &led_green; - led-upgrade = &led_red; - }; - - soc { - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - rng@22000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_red: red { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - }; - - led_green: green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fixed-partitions"; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "wrg"; - label = "firmware"; - reg = <0x180000 0xdc0000>; - }; - partition@fb0000 { - label = "rgbd"; - reg = <0xfb0000 0x10000>; - read-only; - }; - partition@fc0000 { - label = "bdcfg"; - reg = <0xfc0000 0x10000>; - read-only; - }; - partition@fd0000 { - label = "langpack"; - reg = <0xfd0000 0x20000>; - read-only; - }; - partition@ff0000 { - label = "certificate"; - reg = <0xff0000 0x10000>; - read-only; - }; - partition@f40000 { - label = "captival"; - reg = <0xf40000 0x70000>; - read-only; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport5 { - status = "okay"; - - label = "lan"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts deleted file mode 100644 index 50e7f3d4e0..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ /dev/null @@ -1,312 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Linksys EA6350v3"; - compatible = "linksys,ea6350v3"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - MBIB@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - QSEE@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - CDT@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - APPSBLENV@d0000 { - label = "APPSBLENV"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - APPSBL@e0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000e0000 0x00080000>; - read-only; - }; - ART@160000 { - label = "ART"; - reg = <0x00160000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - u_env@170000 { - label = "u_env"; - reg = <0x00170000 0x00020000>; - }; - s_env@190000 { - label = "s_env"; - reg = <0x00190000 0x00020000>; - }; - devinfo@1b0000 { - label = "devinfo"; - reg = <0x001b0000 0x00010000>; - }; - /* 0x001c0000 - 0x00200000 unused */ - }; - }; - - flash@1 { - status = "okay"; - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - kernel@0 { - label = "kernel"; - reg = <0x00000000 0x02800000>; - }; - rootfs@500000 { - label = "rootfs"; - reg = <0x00500000 0x02300000>; - }; - alt_kernel@2800000 { - label = "alt_kernel"; - reg = <0x02800000 0x02800000>; - }; - alt_rootfs@2d00000 { - label = "alt_rootfs"; - reg = <0x02d00000 0x02300000>; - }; - sysdiag@5000000 { - label = "sysdiag"; - reg = <0x05000000 0x00100000>; - }; - syscfg@5100000 { - label = "syscfg"; - reg = <0x05100000 0x02F00000>; - }; - /* 0x00000000 - 0x08000000: 128 MiB */ - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts deleted file mode 100644 index e9d4775fd8..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EnGenius EAP1300"; - compatible = "engenius,eap1300"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_RESTART>; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - power: orange { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan { - function = LED_FUNCTION_LAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - mesh { - label = "blue:mesh"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "yellow:wlan5g"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition7@180000 { - label = "0:ART"; - reg = <0x00180000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - partition8@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x190000 0x1dc0000>; - }; - partition9@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - }; - partition10@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts deleted file mode 100644 index e74d110b3d..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts +++ /dev/null @@ -1,334 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Edgecore ECW5211"; - compatible = "edgecore,ecw5211"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - ethernet0 = &swport5; - ethernet1 = &gmac; - }; - - chosen { - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_YELLOW>; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "green:wlan5g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; /* uboot env */ - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "0:APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - - flash@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs"; - reg = <0x00000000 0x04000000>; - }; - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - tpm@29 { - compatible = "atmel,at97sc3204t"; - reg = <0x29>; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&mdio { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts deleted file mode 100644 index bca85cf4ab..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EnGenius EMD1"; - compatible = "engenius,emd1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "red:wlan2g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - mesh { - label = "orange:mesh"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "userconfig"; - reg = <0x00180000 0x00080000>; - read-only; - }; - partition9@200000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x200000 0x01e00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts deleted file mode 100644 index 701dc936f1..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts +++ /dev/null @@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EnGenius EMR3500"; - compatible = "engenius,emr3500"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - power: white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "blue"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - red { - label = "red"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - orange { - label = "orange"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition@180000 { - label = "userconfig"; - reg = <0x00180000 0x00080000>; - read-only; - }; - partition@200000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x200000 0x1e00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts deleted file mode 100644 index 17bac82bfe..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ /dev/null @@ -1,251 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EnGenius ENS620EXT"; - compatible = "engenius,ens620ext"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - /* - * Disable the broken restart as a workaround for the buggy - * 3.0.0/3.0.1 U-boots that ship with the device. - * Note: The watchdog is now used to restart this device. - */ - restart@4ab000 { - status = "disabled"; - }; - }; - - buttons { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "green:lan1"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "green:lan2"; - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "green:wlan5g"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition@180000 { - label = "ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00190000 0x14d0000>; - }; - partition@1660000 { - label = "failsafe"; - reg = <0x01660000 0x008F0000>; - read-only; - }; - partition@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - read-only; - }; - partition@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts deleted file mode 100644 index 1495c64da9..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer <mail@david-bauer.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" - -/ { - model = "Netgear EX6100v2"; - compatible = "netgear,ex6100v2"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts deleted file mode 100644 index ce24466e54..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer <mail@david-bauer.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" - -/ { - model = "Netgear EX6150v2"; - compatible = "netgear,ex6150v2"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi deleted file mode 100644 index 918224607a..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ /dev/null @@ -1,348 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer <mail@david-bauer.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Netgear EX61X0v2"; - compatible = "netgear,ex61x0v2"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - aliases { - led-boot = &power_amber; - led-failsafe = &power_amber; - led-running = &power_green; - led-upgrade = &power_amber; - label-mac-device = &gmac; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - }; - - right { - label = "blue:right"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - }; - - left { - label = "blue:left"; - gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; - }; - - client_green { - label = "green:client"; - gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; - }; - - client_red { - label = "red:client"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - router_green { - label = "green:router"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - router_red { - label = "red:router"; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <45000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition8@180000 { - label = "config"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition9@190000 { - label = "pot"; - reg = <0x00190000 0x00010000>; - read-only; - }; - - partition10@1a0000 { - label = "dnidata"; - reg = <0x001a0000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_dnidata_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_dnidata_c: macaddr@c { - reg = <0xc 0x6>; - }; - }; - }; - - partition11@1b0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x001b0000 0x00e10000>; - }; - - partition12@fc0000 { - label = "language"; - reg = <0x00fc0000 0x00040000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_dnidata_0>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_dnidata_c>; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "lan"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts deleted file mode 100644 index 524bcbcb2b..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "AVM FRITZ!Box 4040"; - compatible = "avm,fritzbox-4040"; - - aliases { - led-boot = &power; - led-failsafe = &flash; - led-running = &power; - led-upgrade = &flash; - label-mac-device = &gmac; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - switch-leds { - compatible = "gpio-leds"; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <ðphy0 0 GPIO_ACTIVE_HIGH>; - }; - - panic: info_red { - label = "red:info"; - gpios = <ðphy0 1 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <ðphy1 0 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <ðphy2 1 GPIO_ACTIVE_HIGH>; - }; - - lan { - function = LED_FUNCTION_LAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <ðphy3 0 GPIO_ACTIVE_HIGH>; - }; - - flash: info_amber { - label = "amber:info"; - gpios = <ðphy3 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env - empty */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "urlader"; /* APPSBL */ - reg = <0x000f0000 0x0002dc000>; - read-only; - }; - partition7@11dc00 { - /* make a backup of this partition! */ - label = "urlader_config"; - reg = <0x0011dc00 0x00002400>; - read-only; - }; - partition8@120000 { - label = "tffs1"; - reg = <0x00120000 0x00080000>; - read-only; - }; - partition9@1a0000 { - label = "tffs2"; - reg = <0x001a0000 0x00080000>; - read-only; - }; - partition10@220000 { - label = "uboot"; - reg = <0x00220000 0x00080000>; - read-only; - }; - partition11@2A0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x002a0000 0x01c60000>; - }; - partition12@1f00000 { - label = "jffs2"; - reg = <0x01f00000 0x00100000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -ðphy0 { - gpio-controller; - #gpio-cells = <2>; -}; - -ðphy1 { - gpio-controller; - #gpio-cells = <2>; - - enable-usb-power { - gpio-hog; - line-name = "enable USB3 power"; - gpios = <1 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -ðphy2 { - gpio-controller; - #gpio-cells = <2>; -}; - -ðphy3 { - gpio-controller; - #gpio-cells = <2>; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-gl-a1300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-gl-a1300.dts deleted file mode 100644 index cdb0093217..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-gl-a1300.dts +++ /dev/null @@ -1,343 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "GL.iNet GL-A1300"; - compatible = "glinet,gl-a1300", "qcom,ipq4019"; - - aliases { - led-boot = &led_run; - led-failsafe = &led_run; - led-running = &led_run; - led-upgrade = &led_run; - label-mac-device = &swport4; - }; - - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; - }; - - soc { - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - switch { - label = "switch-button"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_SETUP>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_run: blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - white { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - - usb { - gpio-export,name = "usb_power"; - gpio-export,output = <1>; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&prng { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@180000 { - label = "log"; - reg = <0x00180000 0x00020000>; - }; - }; - }; - - spi-nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - pins = "gpio58", "gpio59"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux_spi { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio5"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; -}; - -&usb2 { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0 2>; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0 0>; -}; - -&swport5 { - status = "okay"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "GL-A1300"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "GL-A1300"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts deleted file mode 100644 index 5fc97d7bb2..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-gl-ap1300.dts +++ /dev/null @@ -1,308 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "GL.iNet GL-AP1300"; - compatible = "glinet,gl-ap1300"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 5 GPIO_ACTIVE_HIGH>; - - flash@0 { - status = "okay"; - - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: mac-address@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: mac-address@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - - spi-nand@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux_spi { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio5"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "lan"; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; -}; - -&swport5 { - status = "okay"; - label = "wan"; - - nvmem-cells = <&macaddr_art_6>; - nvmem-cell-names = "mac-address"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "GL-AP1300"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "GL-AP1300"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts deleted file mode 100644 index fa3ed8b054..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts +++ /dev/null @@ -1,298 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "MikroTik hAP ac2"; - compatible = "mikrotik,hap-ac2"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x08000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &led_user; - led-failsafe = &led_user; - led-running = &led_user; - led-upgrade = &led_user; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - mode { - label = "mode"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - panic-indicator; - }; - - led_user: user { - label = "green:user"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enable USB power"; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - read-only; - size = <0x2000>; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - - partition@100000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x100000 0xf00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -ðphy0 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy1 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy2 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy3 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy4 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - label = "lan4"; -}; - -&swport2 { - status = "okay"; - label = "lan3"; -}; - -&swport3 { - status = "okay"; - label = "lan2"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts deleted file mode 100644 index 988b86b68d..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2018, Robert Marko <robimarko@gmail.com> - -#include "qcom-ipq4018-jalapeno.dtsi" - -/ { - model = "8devices Jalapeno"; - compatible = "8dev,jalapeno"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi deleted file mode 100644 index bb293bb57e..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi +++ /dev/null @@ -1,279 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2018, Robert Marko <robimarko@gmail.com> - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - aliases { - ethernet1 = &swport5; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - pinmux_1 { - pins = "gpio53"; - function = "mdio"; - }; - - pinmux_2 { - pins = "gpio52"; - function = "mdc"; - }; - - pinconf { - pins = "gpio52", "gpio53"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - status = "okay"; - - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - - spi-nand@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts deleted file mode 100644 index 501aed5467..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "devolo Magic 2 WiFi next"; - compatible = "devolo,magic-2-wifi-next"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - plc { - gpio-export,name = "plc-enable"; - gpio-export,output = <1>; - gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; - }; - }; - - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "WLAN"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - reset { - label = "Reset"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - status_dlan { - label = "white:dlan"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - status_wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - error_dlan { - label = "red:dlan"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - }; -}; - -&tlmm { - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio61", "gpio60"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - button_pins: button_pinmux { - mux { - function = "gpio"; - pins = "gpio0", "gpio5"; - bias-disable; - input; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -ðphy0 { - status = "disabled"; -}; - -ðphy1 { - status = "disabled"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - linux,modalias = "n25q128a11"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - firmware@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x01a80000>; - }; - }; - }; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport5 { - status = "okay"; - label = "lan1"; -}; - -&swport3 { - status = "okay"; - label = "lan2"; -}; - -&swport4 { - status = "okay"; - label = "ghn"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts deleted file mode 100644 index cab34b5a6c..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o. - * Author: Robert Marko <robert@meshpoint.me> - */ - -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq4018-jalapeno.dtsi" - -/ { - model = "Crisis Innovation Lab MeshPoint.One"; - compatible = "cilab,meshpoint-one"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - soc { - i2c-gpio { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - compatible = "i2c-gpio"; - gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */ - &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */ - >; - - bme280@76 { - status = "okay"; - - compatible = "bosch,bme280"; - reg = <0x76>; - }; - - pcf2129@51 { - status = "okay"; - - compatible = "nxp,pcf2129"; - reg = <0x51>; - }; - - ina230@40 { - status = "okay"; - - compatible = "ti,ina230"; - reg = <0x40>; - shunt-resistor = <2000>; - }; - - ina230@44 { - status = "okay"; - - compatible = "ti,ina230"; - reg = <0x44>; - shunt-resistor = <2000>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART >; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287.dts deleted file mode 100644 index fc4bae6937..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287.dts +++ /dev/null @@ -1,229 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. -// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> - -#include "qcom-ipq4018-mf287_common.dtsi" - -/ { - model = "ZTE MF287"; - compatible = "zte,mf287"; -}; - -&gpio_modem_reset { - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; -}; - -&key_reset { - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; -}; - -&key_wps { - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; -}; - -&led_status { - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>, - <&tlmm 1 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; - - spi-nand@1 { /* flash@1 ? */ - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0x140000>; - read-only; - }; - - partition@140000 { - label = "ART"; - reg = <0x140000 0x140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@280000 { - label = "mac"; - reg = <0x280000 0x140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mac_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@3c0000 { - label = "cfg-param"; - reg = <0x3c0000 0x600000>; - read-only; - }; - - partition@9c0000 { - label = "oops"; - reg = <0x9c0000 0x140000>; - }; - - partition@b00000 { - label = "web"; - reg = <0xb00000 0x800000>; - }; - - partition@1300000 { - label = "rootfs"; - reg = <0x1300000 0x2200000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x3200000>; - }; - }; - }; - - zigbee@2 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "silabs,em3581"; - reg = <2>; - spi-max-frequency = <12000000>; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59", "gpio1"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "zte,mf287"; -}; - -&wifi1{ - qcom,ath10k-calibration-variant = "zte,mf287"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi deleted file mode 100644 index 3784e62d0b..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi +++ /dev/null @@ -1,188 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. -// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - chosen { - /* - * bootargs forced by u-boot bootipq command: - * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' - */ - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - leds { - compatible = "gpio-leds"; - - led_status: led-0 { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_modem_reset: modem { - gpio-export,name = "modem-reset"; - gpio-export,output = <0>; - }; - }; - - keys { - compatible = "gpio-keys"; - - key_reset: key-reset { - label = "reset"; - linux,code = <KEY_RESTART>; - }; - - key_wps: key-wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; -}; - -&mdio { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_mac_0 2>; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - - label = "lan1"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan3"; -}; - -&swport5 { - status = "okay"; - - label = "lan4"; -}; - -&qpic_bam { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0 0>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0 1>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts deleted file mode 100644 index 8eb8ce8503..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts +++ /dev/null @@ -1,229 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. -// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> - -#include "qcom-ipq4018-mf287_common.dtsi" - -/ { - model = "ZTE MF287Plus"; - compatible = "zte,mf287plus"; -}; - -&gpio_modem_reset { - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; -}; - -&key_reset { - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; -}; - -&key_wps { - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; -}; - -&led_status { - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>, - <&tlmm 1 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; - - spi-nand@1 { /* flash@1 ? */ - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0x140000>; - read-only; - }; - - partition@140000 { - label = "ART"; - reg = <0x140000 0x140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@280000 { - label = "mac"; - reg = <0x280000 0x140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mac_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@3c0000 { - label = "cfg-param"; - reg = <0x3c0000 0x600000>; - read-only; - }; - - partition@9c0000 { - label = "oops"; - reg = <0x9c0000 0x140000>; - }; - - partition@b00000 { - label = "web"; - reg = <0xb00000 0x800000>; - }; - - partition@1300000 { - label = "rootfs"; - reg = <0x1300000 0x2200000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x3200000>; - }; - }; - }; - - zigbee@2 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "silabs,em3581"; - reg = <2>; - spi-max-frequency = <12000000>; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59", "gpio1"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "zte,mf287plus"; -}; - -&wifi1{ - qcom,ath10k-calibration-variant = "zte,mf287plus"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts deleted file mode 100644 index b4b9451cb2..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts +++ /dev/null @@ -1,276 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. -// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> - -#include "qcom-ipq4018-mf287_common.dtsi" - -/ { - model = "ZTE MF287Pro"; - compatible = "zte,mf287pro"; - - regulator-usb-vbus { - compatible = "regulator-fixed"; - regulator-name = "USB_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&tlmm 25 GPIO_ACTIVE_LOW>; - }; -}; - -&gpio_modem_reset { - gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; -}; - -&key_reset { - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; -}; - -&key_wps { - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; -}; - -&led_status { - gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, - <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; - - spi-nand@1 { /* flash@1 ? */ - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "ART"; - reg = <0xa0000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@120000 { - label = "mac"; - reg = <0x120000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mac_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1a0000 { - label = "reserved2"; - reg = <0x1a0000 0xc0000>; - }; - - partition@260000 { - label = "cfg-param"; - reg = <0x260000 0x400000>; - read-only; - }; - - partition@660000 { - label = "log"; - reg = <0x660000 0x400000>; - }; - - partition@a60000 { - label = "oops"; - reg = <0xa60000 0xa0000>; - }; - - partition@b00000 { - label = "reserved3"; - reg = <0xb00000 0x500000>; - }; - - partition@1000000 { - label = "web"; - reg = <0x1000000 0x800000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0x1d00000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x3200000>; - }; - }; - }; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12", "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -/* The MF287Plus and MF287Pro share the same board data file */ -&wifi0 { - qcom,ath10k-calibration-variant = "zte,mf287plus"; -}; - -/* The MF287Plus and MF287Pro share the same board data file */ -&wifi1{ - qcom,ath10k-calibration-variant = "zte,mf287plus"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts deleted file mode 100644 index a9e9683592..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ /dev/null @@ -1,365 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "ZyXEL NBG6617"; - compatible = "zyxel,nbg6617"; - - chosen { - /* - * the vendor u-boot adds root and mtdparts cmdline parameters - * which we don't want... but we have to overwrite them or else - * the kernel will take them at face value. - */ - bootargs-append = " mtdparts= root=31:13"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_RFKILL>; - linux,input-type = <EV_SW>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "green:wlan5g"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; - led_pins: led_pinmux { - mux { - pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; - drive-strength = <0x8>; - bias-disable; - output-low; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBL"; /* u-boot */ - reg = <0x000e0000 0x00080000>; - /* U-Boot Standalone App "zloader" is located at 0x64000 */ - read-only; - }; - partition6@160000 { - label = "APPSBLENV"; /* u-boot env */ - reg = <0x00160000 0x00010000>; - }; - partition7@170000 { - /* make a backup of this partition! */ - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "kernel"; - reg = <0x00180000 0x00400000>; - }; - partition9@580000 { - label = "dualflag"; - reg = <0x00580000 0x00010000>; - read-only; - }; - partition10@590000 { - label = "header"; - reg = <0x00590000 0x00010000>; - }; - partition11@5a0000 { - label = "romd"; - reg = <0x005a0000 0x00100000>; - read-only; - }; - partition12@6a0000 { - label = "not_root_data"; - /* - * for some strange reason, someone at ZyXEL - * had the "great" idea to put the rootfs_data - * in front of rootfs... Don't do that! - * As a result this one, full MebiByte remains - * unused. - */ - reg = <0x006a0000 0x00100000>; - }; - partition13@7a0000 { - label = "rootfs"; - reg = <0x007a0000 0x01860000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - - label = "lan4"; -}; - -&swport2 { - status = "okay"; - - label = "lan3"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts deleted file mode 100644 index f23b58a3f4..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts +++ /dev/null @@ -1,232 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org> - * Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai> - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Plasma Cloud PA1200"; - compatible = "plasmacloud,pa1200"; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - aliases { - led-boot = &led_status_purple; - led-failsafe = &led_status_yellow; - led-running = &led_status_cyan; - led-upgrade = &led_status_yellow; - label-mac-device = &swport5; - }; - - leds { - compatible = "gpio-leds"; - - led_status_cyan: status_cyan { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_CYAN>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - led_status_purple: status_purple { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_PURPLE>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - led_status_yellow: status_yellow { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_YELLOW>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; - -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - /* partitions are passed via bootloader */ - partitions { - partition-art { - label = "0:ART"; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "ethernet2"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&swport5 { - status = "okay"; - label = "ethernet1"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts deleted file mode 100644 index 38158fbfa7..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ASUS RT-AC58U"; - compatible = "asus,rt-ac58u"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x8000000>; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: led-0 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led-1 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WAN; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - /* - * linux,default-trigger = "90000.mdio-1:04:link"; - * sadly still lacks rx+tx - */ - }; - - led-2 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <2>; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - led-3 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <5>; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - led-4 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_USB; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - led-5 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_LAN; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* - * U-boot looks for "n25q128a11" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - compatible = "jedec,spi-nor"; - reg = <0>; - linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; - spi-max-frequency = <30000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - /* 0x00180000 - 0x00200000 unused */ - }; - }; - - spi-nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <30000000>; - - /* - * U-boot looks for "spinand,mt29f" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi deleted file mode 100644 index 737e7365a6..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - aliases { - serial0 = &blsp1_uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - soc { - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 4 1>; - linux,code = <KEY_RESTART>; - }; - }; - }; -}; - -&prng { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio58", "gpio59"; - function = "blsp_i2c0"; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>; - num-cs = <2>; - status = "okay"; - - xt25f128b@0 { - /* - * Factory U-boot looks in 0:BOOTCONFIG partition for active - * partitions settings and mangles the partition config so - * 0:QSEE/0:QSEE_1, 0:CDT/0:CDT_1 and 0:APPSBL/0:APPSBL_1 pairs - * can be swaped. It isn't a problem but we never can be sure where - * OFW put factory images. "n25q128a11" is required for proper nor - * recognition in u-boot. - */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:BOOTCONFIG"; - reg = <0x60000 0x20000>; - read-only; - }; - - partition@80000 { - label = "0:BOOTCONFIG1"; - reg = <0x80000 0x20000>; - read-only; - }; - - partition@a0000 { - label = "0:QSEE"; - reg = <0xa0000 0x60000>; - read-only; - }; - - partition@100000 { - label = "0:QSEE_1"; - reg = <0x100000 0x60000>; - read-only; - }; - - partition@160000 { - label = "0:CDT"; - reg = <0x160000 0x10000>; - read-only; - }; - - partition@170000 { - label = "0:CDT_1"; - reg = <0x170000 0x10000>; - read-only; - }; - - partition@180000 { - label = "0:DDRPARAMS"; - reg = <0x180000 0x10000>; - read-only; - }; - - partition@190000 { - label = "0:APPSBLENV"; - reg = <0x190000 0x10000>; - read-only; - }; - - partition@1a0000 { - label = "0:APPSBL"; - reg = <0x1a0000 0xa0000>; - read-only; - }; - - partition@240000 { - label = "0:APPSBL_1"; - reg = <0x240000 0xa0000>; - read-only; - }; - - partition@2e0000 { - label = "0:ART"; - reg = <0x2e0000 0x10000>; - read-only; - }; - - config: partition@2f0000 { - label = "0:CONFIG"; - reg = <0x2f0000 0x10000>; - read-only; - }; - - partition@300000 { - label = "0:CONFIG_RW"; - reg = <0x300000 0x10000>; - read-only; - }; - - partition@310000 { - label = "0:EVENTSLOG"; - reg = <0x310000 0x90000>; - read-only; - }; - }; - }; - - xt26g02a@1 { - /* - * Factory U-boot looks in 0:BOOTCONFIG partition for active - * partitions settings and mangles the partition config so - * rootfs/rootfs_1 pairs can be swaped. - * It isn't a problem but we never can be sure where OFW put - * factory images. "spinand,mt29f" value is required for proper - * nand recognition in u-boot. - */ - compatible = "spi-nand", "spinand,mt29f"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs_1"; - reg = <0x00000000 0x08000000>; - }; - - partition@8000000 { - label = "rootfs"; - reg = <0x08000000 0x08000000>; - }; - }; - }; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy-reset-gpio = <&tlmm 62 0>; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx10.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx10.dts deleted file mode 100644 index 8fc976a11b..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx10.dts +++ /dev/null @@ -1,73 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4018-rutx.dtsi" - -/ { - model = "Teltonika RUTX10"; - compatible = "teltonika,rutx10"; - - soc { - leds { - compatible = "gpio-leds"; - - wifi2g { - label = "green:wifi2g"; - gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi5g { - label = "green:wifi5g"; - gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_out { - gpio-export,name = "gpio_out"; - gpio-export,output = <0>; - gpio-export,direction_may_change = <0>; - gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>; - }; - - gpio_in { - gpio-export,name = "gpio_in"; - gpio-export,input = <0>; - gpio-export,direction_may_change = <0>; - gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>; - }; - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - stm32_io: stm32@74 { - compatible = "tlt,stm32v1"; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - interrupt-parent = <&tlmm>; - interrupts = <5 2>; - reg = <0x74>; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Teltonika-RUTX10"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Teltonika-RUTX10"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx50.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx50.dts deleted file mode 100644 index ea2102f7d6..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-rutx50.dts +++ /dev/null @@ -1,181 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4018-rutx.dtsi" - -/ { - model = "Teltonika RUTX50"; - compatible = "teltonika,rutx50"; - - aliases { - led-boot = &led_rssi0; - led-failsafe = &led_rssi0; - led-running = &led_rssi0; - led-upgrade = &led_rssi0; - label-mac-device = &gmac; - }; - - soc { - gpio-export { - compatible = "gpio-export"; - #size-cells = <0>; - - gpio_modem_reset { - gpio-export,name = "modem_reset"; - gpio-export,output = <0>; - gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>; - }; - - gpio_modem_power { - gpio-export,name = "modem_power"; - gpio-export,output = <0>; - gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>; - }; - - gpio_out_1 { - gpio-export,name = "sim-select"; - /* 0 = SIM1 ; 1 = SIM2 */ - gpio-export,output = <0>; - gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>; - }; - - gpio_in_1 { - gpio-export,name = "sim-detect"; - gpio-export,input = <0>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "green:sim1"; - gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "green:sim2"; - gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>; - }; - - led-2 { - label = "green:eth"; - gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>; - }; - - led-3 { - label = "green:wifi"; - gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>; - }; - - led-4 { - label = "green:3g"; - gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>; - }; - - led-5 { - label = "green:4g"; - gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>; - }; - - led-6 { - label = "green:5g"; - gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>; - }; - - led_rssi0: led-7 { - label = "green:rssi0"; - gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>; - }; - - led-8 { - label = "green:rssi1"; - gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>; - }; - - led-9 { - label = "green:rssi2"; - gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>; - }; - - led-10 { - label = "green:wifi2g"; - gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>; - }; - - led-11 { - label = "green:wifi5g"; - gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>; - }; - }; - - spi-gpio { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>; - cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - - shift_io: shift_io@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - /* Attn: This is specific to RUTX50 in Teltonika GPL */ - registers-number = <2>; - spi-max-frequency = <10000000>; - }; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Teltonika-RUTX10"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Teltonika-RUTX10"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - - label = "lan1"; -}; - -&swport2 { - status = "okay"; - - label = "lan2"; -}; - -&swport3 { - status = "okay"; - - label = "lan3"; -}; - -&swport4 { - status = "okay"; - - label = "lan4"; -}; - -&swport5 { - status = "okay"; - - label = "wan"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts deleted file mode 100644 index 252f9ad71a..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "MikroTik SXTsq 5 ac (RBSXTsqG-5acD)"; - compatible = "mikrotik,sxtsq-5-ac"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &led_user; - led-failsafe = &led_user; - led-running = &led_user; - led-upgrade = &led_user; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII4>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - panic-indicator; - }; - - led_user: user { - label = "green:user"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - rssilow { - label = "green:rssilow"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - rssimediumlow { - label = "green:rssimediumlow"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - rssimedium { - label = "green:rssimedium"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - rssimediumhigh { - label = "green:rssimediumhigh"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - rssihigh { - label = "green:rssihigh"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - read-only; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - - partition@100000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x100000 0xf00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-SXTsq-5-ac"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; - - /delete-property/ psgmii-ethphy; -}; - -&swport5 { - status = "okay"; - - label = "lan"; - phy-mode = "rgmii"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wac510.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wac510.dts deleted file mode 100644 index 9bcfab4487..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wac510.dts +++ /dev/null @@ -1,385 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Netgear WAC510"; - compatible = "netgear,wac510"; - - aliases { - led-boot = &led_power_amber; - led-failsafe = &led_power_amber; - led-running = &led_power_green; - led-upgrade = &led_power_amber; - ethernet1 = &swport5; - }; - - chosen { - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - ssr: ssr@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power_amber: led-0 { - color = <LED_COLOR_ID_AMBER>; - function = LED_FUNCTION_POWER; - gpios = <&ssr 6 GPIO_ACTIVE_LOW>; - panic-indicator; - }; - - led_power_green: led-1 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_POWER; - gpios = <&ssr 5 GPIO_ACTIVE_LOW>; - }; - - led-2 { - /* 2.4GHz blue - activity */ - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <0>; - gpios = <&ssr 4 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - led-3 { - /* 2.4GHz green - link */ - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN; - function-enumerator = <0>; - gpios = <&ssr 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0radio"; - }; - - led-4 { - /* 5GHz blue - activity */ - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <1>; - gpios = <&ssr 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - led-5 { - /* 5GHz green - link */ - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN; - function-enumerator = <1>; - gpios = <&ssr 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1radio"; - }; - - led-6 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_ACTIVITY; - gpios = <&ssr 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x000f0000>; - read-only; - }; - - partition@1e0000 { - label = "0:MANUDATA"; - reg = <0x001e0000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_manudata_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1f0000 { - label = "0:ART"; - reg = <0x001f0000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - - nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <48000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs"; - reg = <0x00000000 0x03800000>; - }; - - partition@3800000 { - label = "rootfs_1"; - reg = <0x03800000 0x03800000>; - }; - - partition@7000000 { - label = "var_config"; - reg = <0x07000000 0x00f00000>; - read-only; - }; - - partition@7f00000 { - label = "Oops_log"; - reg = <0x07f00000 0x000c0000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&mdio { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_manudata_6 0>; - qcom,ath10k-calibration-variant = "Netgear-WAC510"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_manudata_6 16>; - qcom,ath10k-calibration-variant = "Netgear-WAC510"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts deleted file mode 100644 index 8ff18d92b7..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac-lte.dts +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2022, Alexander Couzens <lynxis@fe80.eu> */ - -#include "qcom-ipq4018-wap-ac.dtsi" - -/ { - model = "MikroTik wAP ac LTE"; - compatible = "mikrotik,wap-ac-lte"; - - soc { - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - }; -}; - -&tlmm { - enable-usb-power { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enable USB power"; - }; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts deleted file mode 100644 index 1bfcbf1e33..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dts +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4018-wap-ac.dtsi" - -/ { - model = "MikroTik wAP ac"; - compatible = "mikrotik,wap-ac"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi deleted file mode 100644 index 2b357a1f03..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-ac.dtsi +++ /dev/null @@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - memory { - device_type = "memory"; - reg = <0x80000000 0x08000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &led_user; - led-failsafe = &led_user; - led-running = &led_user; - led-upgrade = &led_user; - }; - - soc { - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - led_user: user { - label = "green:user"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - }; -}; - -&prng { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - read-only; - size = <0x2000>; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - - partition@100000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x100000 0xf00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "sw-eth2"; -}; - -&swport5 { - status = "okay"; - label = "sw-eth1"; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-wAP-ac"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-wAP-ac"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts deleted file mode 100644 index e7f28f23cf..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wap-r-ac.dts +++ /dev/null @@ -1,45 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2022, Alexander Couzens <lynxis@fe80.eu> */ - -#include "qcom-ipq4018-wap-ac.dtsi" - -/ { - model = "MikroTik wAP R ac"; - compatible = "mikrotik,wap-r-ac"; - - soc { - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - }; -}; - -&tlmm { - enable-usb-power { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enable USB power"; - }; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-whw01.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-whw01.dts deleted file mode 100644 index 1f26db5869..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-whw01.dts +++ /dev/null @@ -1,338 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Linksys WHW01"; - compatible = "linksys,whw01"; - - aliases { - serial0 = &blsp1_uart1; - led-boot = &led_system_blue; - led-running = &led_system_blue; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs-append = " root=/dev/ubiblock0_0"; - }; - - soc { - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - ess_tcsr@1953000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - status = "okay"; - pinctrl-0 = <&i2c_0_pins>; - pinctrl-1 = <&i2c_0_pins>; - pinctrl-names = "i2c_active", "i2c_sleep"; - - leds@62 { - compatible = "nxp,pca9633"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x62>; - - /* RGB? */ - led@0 { - reg = <0>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_POWER; - }; - - led@1 { - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_POWER; - }; - - led_system_blue: led@2 { - reg = <2>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - linux,default-trigger = "default-on"; - }; - }; -}; - -&blsp1_spi1 { - status = "okay"; - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; - - nor@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "APPSBL"; - reg = <0xd0000 0xa0000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@180000 { - label = "u_env"; - reg = <0x180000 0x40000>; - }; - - partition@1c0000 { - label = "s_env"; - reg = <0x1c0000 0x20000>; - }; - - partition@1e0000 { - label = "devinfo"; - reg = <0x1e0000 0x20000>; - read-only; - }; - }; - }; - - nand@1 { - reg = <1>; - compatible = "spi-nand"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0000000 0x5000000>; - }; - - partition@600000 { - label = "rootfs"; - reg = <0x0600000 0x4a00000>; - }; - - partition@5000000 { - label = "alt_kernel"; - reg = <0x5000000 0x5000000>; - }; - - partition@5600000 { - label = "alt_rootfs"; - reg = <0x5600000 0x4a00000>; - }; - - partition@a000000 { - label = "sysdiag"; - reg = <0xa000000 0x0200000>; - read-only; - }; - - partition@a200000 { - label = "syscfg"; - reg = <0xa200000 0x5e00000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy-reset-gpio = <&tlmm 62 GPIO_ACTIVE_HIGH>; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - }; - - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinconf_cs { - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - bias-disable; - }; - }; - - reset_pinmux { - mux { - pins = "gpio63"; - bias-pull-up; - }; - }; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-whw01-v1"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-whw01-v1"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "eth1"; -}; - -&swport5 { - status = "okay"; - label = "eth2"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts deleted file mode 100644 index dd56cb215e..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wr-1.dts +++ /dev/null @@ -1,289 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Pakedge WR-1"; - compatible = "pakedge,wr-1"; - - aliases { - label-mac-device = &gmac; - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&key_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - }; - - wlan2g { - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x0060000 0x0060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x00c0000 0x0010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x00d0000 0x0010000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0x00e0000 0x0010000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0x00f0000 0x0080000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x0170000 0x0010000>; - read-only; - }; - - partition@180000 { - label = "firmware"; - reg = <0x0180000 0x1e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&crypto { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&prng { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - - label = "lan4"; -}; - -&swport2 { - status = "okay"; - - label = "lan3"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&tlmm { - key_pins: key_pinmux { - mux { - function = "gpio"; - pins = "gpio59"; - bias-pull-up; - }; - }; - - led_pins: led_pinmux { - mux { - function = "gpio"; - pins = "gpio0", "gpio1", "gpio2"; - bias-none; - drive-strength = <2>; - output-low; - }; - }; - - serial_pins: serial_pinmux { - mux { - function = "blsp_uart0"; - pins = "gpio60", "gpio61"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - bias-disable; - drive-strength = <12>; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - bias-disable; - drive-strength = <2>; - output-high; - }; - }; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "Pakedge-WR-1"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "Pakedge-WR-1"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts deleted file mode 100644 index 7ce0b9e359..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer <mail@david-bauer.net> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "ZyXEL WRE6606"; - compatible = "zyxel,wre6606"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs-append = " mtdparts="; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "red:wlan5g"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "red:wlan2g"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00ce0000>; - }; - - partition9@e60000 { - label = "manufacture"; - reg = <0x00e60000 0x00050000>; - read-only; - }; - - partition10@eb0000 { - label = "storage"; - reg = <0x00eb0000 0x00150000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts deleted file mode 100644 index f3c6f34bf4..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts +++ /dev/null @@ -1,305 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Luma Home WRTQ-329ACN"; - compatible = "luma,wrtq-329acn"; - - i2c-gpio { - compatible = "i2c-gpio"; - sda-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - #address-cells = <1>; - #size-cells = <0>; - - /* No driver exists */ - led_ring@48 { - compatible = "ti,msp430"; - reg = <0x48>; - }; - - eeprom@50 { - compatible = "atmel,24c16"; - reg = <0x50>; - pagesize = <16>; - read-only; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - - -&blsp1_spi1 { - status = "okay"; - - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x040000 0x020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x060000 0x060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x0c0000 0x010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x0d0000 0x010000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0x0e0000 0x010000>; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0x0f0000 0x080000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0{ - reg = <0x0000 0x0006>; - }; - - macaddr_art_6: macaddr@6{ - reg = <0x0006 0x0006>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - - flash@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x0000000 0x8000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial0_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -ðphy0 { - status = "disabled"; -}; - -ðphy1 { - status = "disabled"; -}; - -ðphy3 { - status = "disabled"; -}; - -&mdio { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport3 { - status = "okay"; - - label = "lan"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_art_6>; -}; - -&swport5 { - status = "okay"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_art_0>; -}; - -&tlmm { - serial0_pins: serial0_pinmux { - mux { - function = "blsp_uart0"; - pins = "gpio60", "gpio61"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - bias-disable; - drive-strength = <12>; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - bias-disable; - drive-strength = <2>; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "Luma-WRTQ-329ACN"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-a62.dts deleted file mode 100644 index 39a52a7c48..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ /dev/null @@ -1,276 +0,0 @@ -// SPDX-License-Identifier: ISC -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com> - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "OpenMesh A62"; - compatible = "openmesh,a62"; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART >; - }; - }; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_green; - label-mac-device = &swport4; - }; - - leds { - compatible = "gpio-leds"; - - status_red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; - }; - - led_status_green: status_green { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - status_blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <58 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "enable USB2 power"; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - /* partitions are passed via bootloader */ - partitions { - partition-art { - label = "0:ART"; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5170000 5350000>; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_9000>; - }; - }; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "ethernet1"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&swport5 { - status = "okay"; - label = "ethernet2"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5470000 5875000>; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts deleted file mode 100644 index d1c8d798f9..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts +++ /dev/null @@ -1,393 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "MobiPromo CM520-79F"; - compatible = "mobipromo,cm520-79f"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <1000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; - }; - - led_sys: can { - label = "blue:can"; - gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "blue:lan1"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "blue:lan2"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "MIBIB"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "BOOTCONFIG"; - reg = <0x200000 0x100000>; - }; - - partition@300000 { - label = "QSEE"; - reg = <0x300000 0x100000>; - read-only; - }; - - partition@400000 { - label = "QSEE_1"; - reg = <0x400000 0x100000>; - read-only; - }; - - partition@500000 { - label = "CDT"; - reg = <0x500000 0x80000>; - read-only; - }; - - partition@580000 { - label = "CDT_1"; - reg = <0x580000 0x80000>; - read-only; - }; - - partition@600000 { - label = "BOOTCONFIG1"; - reg = <0x600000 0x80000>; - }; - - partition@680000 { - label = "APPSBLENV"; - reg = <0x680000 0x80000>; - }; - - partition@700000 { - label = "APPSBL"; - reg = <0x700000 0x200000>; - read-only; - }; - - partition@900000 { - label = "APPSBL_1"; - reg = <0x900000 0x200000>; - read-only; - }; - - art: partition@b00000 { - label = "ART"; - reg = <0xb00000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - macaddr_art_1006: macaddr@1006 { - reg = <0x1006 0x6>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - macaddr_art_5006: macaddr@5006 { - reg = <0x5006 0x6>; - }; - }; - }; - - partition@b80000 { - label = "ubi"; - reg = <0xb80000 0x7480000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; - - nvmem-cells = <&macaddr_art_1006>; - nvmem-cell-names = "mac-address"; -}; - -&switch { - status = "okay"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; -}; - -&swport5 { - status = "okay"; - - nvmem-cells = <&macaddr_art_5006>; - nvmem-cell-names = "mac-address"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "CM520-79F"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "CM520-79F"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts deleted file mode 100644 index 243d19fb03..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts +++ /dev/null @@ -1,139 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com> - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Qxwlan E2600AC c1"; - compatible = "qxwlan,e2600ac-c1"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C1"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "sw-eth1"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&swport5 { - status = "okay"; - - label = "sw-eth2"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts deleted file mode 100644 index 9300568986..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts +++ /dev/null @@ -1,182 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com> - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Qxwlan E2600AC c2"; - compatible = "qxwlan,e2600ac-c2"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x04000000>; - }; - }; - }; -}; - -&tlmm { - nand_pins: nand-pins { - - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C2"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC-C2"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - label = "sw-eth1"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&swport4 { - status = "okay"; - label = "sw-eth2"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&swport5 { - status = "okay"; - - label = "sw-eth3"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi deleted file mode 100644 index d226611311..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ /dev/null @@ -1,246 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com> - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - - model = "Qxwlan E2600AC"; - compatible = "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256MB */ - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - - led1 { - label = "green:wlan0"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - led2 { - label = "green:wlan1"; - gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; - }; - - led3 { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - led4 { - label = "green:ctrl1"; - gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; - }; - - led5 { - label = "green:ctrl2"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - led6 { - label = "green:ctrl3"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - i2c_0_pins: i2c-0-pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts deleted file mode 100644 index 1b9276ede2..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq4019-xx8300.dtsi" - -/ { - model = "Linksys EA8300 (Dallas)"; - compatible = "linksys,ea8300", "qcom,ipq4019"; - - - aliases { - led-boot = &led_wps_amber; - led-failsafe = &led_wps; - led-running = &led_linksys; - led-upgrade = &led_world; - serial0 = &blsp1_uart1; - }; - - - leds { - compatible = "gpio-leds"; - - // Retain node names from running OEM on EA8300 - - // Front panel LEDs, top to bottom - - led_plug: diag { - label = "amber:plug"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - - led_world: internet { - label = "amber:world"; - gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; - }; - - led_wps: wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_wps_amber: wps_amber { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_AMBER>; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_linksys: pwr { - label = "white:linksys"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - // On back panel, above USB socket - - led_usb: usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb3_port1>, <&usb3_port2>, - <&usb2_port1>; - linux,default-trigger = "usbport"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5330000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi2 { - status = "okay"; - ieee80211-freq-limit = <5490000 5835000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts deleted file mode 100644 index 000acd196c..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts +++ /dev/null @@ -1,291 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "EnGenius EAP2200"; - compatible = "engenius,eap2200"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_AMBER>; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "blue:lan1"; - gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "blue:lan2"; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "yellow:wlan5g"; - gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wlan5g2 { - label = "yellow:wlan5g2"; - gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy2tpt"; - }; - - mode { - label = "blue:mode"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - partition@40000000 { - label = "ubi"; - reg = <0x04000000 0x04000000>; - }; - - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_9000>; - ieee80211-freq-limit = <5470000 5875000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts deleted file mode 100644 index a118bdf26b..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ /dev/null @@ -1,325 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "AVM FRITZ!Box 7530"; - compatible = "avm,fritzbox-7530"; - - chosen { - bootargs-append = " coherent_pool=4M"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &info_red; - led-running = &power_green; - led-upgrade = &info_red; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - dect { - label = "dect"; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PHONE>; - }; - }; - - leds { - compatible = "gpio-leds"; - - info_red: info_red { - label = "red:info"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - info { - label = "green:info"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - }; - - fon { - label = "green:fon"; - gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - }; - - power_green: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - usb-power { - line-name = "enable USB3 power"; - gpios = <49 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - /delete-property/ nand-ecc-strength; - /delete-property/ nand-ecc-step-size; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - dsl@1,0 { - compatible = "intel,vrx518"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts deleted file mode 100644 index 7d683cdf65..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ /dev/null @@ -1,294 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "AVM FRITZ!Repeater 1200"; - compatible = "avm,fritzrepeater-1200"; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - label-mac-device = &wifi0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy: ethernet-phy@0 { - reg = <0x0>; - }; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - key { - compatible = "gpio-keys"; - - wps { - label = "WPS button"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_red: power_red { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - power_yellow { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_YELLOW>; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - phy-reset { - line-name = "PHY-reset"; - gpios = <19 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; - - phy-reset-2 { - line-name = "PHY-reset-2"; - gpios = <47 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; - - /delete-property/ psgmii-ethphy; -}; - -&swport5 { - status = "okay"; - - label = "lan"; - phy-handle = <ðphy>; - phy-mode = "rgmii-id"; -}; - -ðphy1 { - status = "disabled"; -}; - -ðphy2 { - status = "disabled"; -}; - -ðphy3 { - status = "disabled"; -}; - -ðphy4 { - status = "disabled"; -}; - -&psgmiiphy { - status = "disabled"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts deleted file mode 100644 index 2555984384..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ /dev/null @@ -1,274 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "AVM FRITZ!Repeater 3000"; - compatible = "avm,fritzrepeater-3000"; - - aliases { - led-boot = &power_led; - led-failsafe = &power_led; - led-running = &power_led; - led-upgrade = &power_led; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - key { - compatible = "gpio-keys"; - - connect { - label = "Connect"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - connect_red { - label = "red:connect"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - connect_green { - label = "green:connect"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - - connect_blue { - label = "blue:connect"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - power_led: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - /delete-property/ nand-ecc-strength; - /delete-property/ nand-ecc-step-size; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - /* QCA9984 */ - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - /* Uses the reference BDF */ - }; - }; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; -}; - -&swport5 { - status = "okay"; - - label = "lan2"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts deleted file mode 100644 index 9f645dd657..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts +++ /dev/null @@ -1,392 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "GL.iNet GL-B2200"; - compatible = "glinet,gl-b2200", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - chosen { - bootargs-append = " root=/dev/mmcblk0p2 rw rootwait clk_ignore_unused"; - }; - - aliases { - ethernet1 = &swport4; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - linux,input-type = <1>; - }; - - reset { - label = "reset"; - gpios = <&tlmm 40 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - linux,input-type = <1>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_blue { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - internet_blue { - label = "blue:internet"; - gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; - }; - power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - }; - internet_white { - label = "white:internet"; - gpios = <&tlmm 66 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&blsp1_spi2 { - pinctrl-0 = <&spi_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - spidev1: spi@0 { - compatible = "silabs,si3210"; - reg = <0>; - spi-max-frequency = <24000000>; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", - "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - spi_1_pins: spi_1_pinmux { - mux { - pins = "gpio44", "gpio46", "gpio47"; - function = "blsp_spi1"; - bias-disable; - }; - cs { - pins = "gpio45"; - function = "gpio"; - bias-pull-up; - }; - reset { - pins = "gpio43"; - function = "gpio"; - output-high; - }; - mux_2 { - pins = "gpio35"; - function = "gpio"; - output-high; - }; - host_int { - pins = "gpio2"; - function = "gpio"; - input; - }; - wake { - pins = "gpio48"; - function = "gpio"; - output-high; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio29", "gpio30", "gpio31", "gpio32"; - drive-strength = <10>; - }; - - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - pinmux_sd7 { - function = "sdio"; - pins = "gpio28"; - drive-strength = <10>; - bias-disable; - }; - }; - -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - status = "okay"; - /* Bootlog shows this is a 168c:0056 - QCA 9888v2 */ - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_9000>; - qcom,ath10k-calibration-variant = "GL-B2200"; - ieee80211-freq-limit = <5450000 5900000>; - }; - }; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "wan"; -}; - -&swport5 { - status = "okay"; - - label = "lan"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "GL-B2200"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "GL-B2200"; - ieee80211-freq-limit = <5100000 5400000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts deleted file mode 100644 index 26e9941a9f..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts +++ /dev/null @@ -1,392 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2019, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "8devices Habanero DVK"; - compatible = "8dev,habanero-dvk"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_upgrade; - ethernet1 = &swport5; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_upgrade: upgrade { - label = "green:upgrade"; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "green:wlan5g"; - gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", "gpio68", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <10>; - }; - - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - pinmux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - partition@180000 { - label = "cfg"; - reg = <0x00180000 0x00040000>; - }; - partition@1c0000 { - label = "firmware"; - compatible = "denx,fit"; - reg = <0x001c0000 0x01e40000>; - }; - }; - }; -}; - -/* Some DVK boards ship without NAND */ -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - /* Free slot for use */ - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "8devices-Habanero"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "8devices-Habanero"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3-lte6-kit.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3-lte6-kit.dts deleted file mode 100644 index 52af1f125e..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3-lte6-kit.dts +++ /dev/null @@ -1,318 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "MikroTik hAP ac3 LTE6 kit"; - compatible = "mikrotik,hap-ac3-lte6-kit"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &led_status_blue; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_red; - }; - - soc { - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_blue: status-blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - led_status_red: status-red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_status_green: status-green { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; - }; - - ethernet { - label = "green:ethernet"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - }; - - lan1 { - label = "green:lan1"; - gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; - }; - - lan2 { - label = "green:lan2"; - gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; - }; - - lan3 { - label = "green:lan3"; - gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; - }; - - lan4 { - label = "green:lan4"; - gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <44 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enable USB power"; - }; - - enable-mpcie-power { - gpio-hog; - gpios = <51 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enable mPCI-E power"; - }; - -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <10000000>; - #address-cells = <1>; - #size-cells = <1>; - - - partitions { - compatible = "fixed-partitions"; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - size = <0x2000>; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - - partition@110000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x110000 0xef0000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - label = "lan4"; -}; - -&swport2 { - status = "okay"; - label = "lan3"; -}; - -&swport3 { - status = "okay"; - label = "lan2"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&prng { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts deleted file mode 100644 index 4e2b4574d3..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "MikroTik hAP ac3"; - compatible = "mikrotik,hap-ac3"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &led_status_blue; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_red; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - mode { - label = "mode"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RFKILL>; - }; - - led { - label = "led"; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_blue: status-blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - led_status_red: status-red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_status_green: status-green { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; - }; - - ethernet { - label = "green:ethernet"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - }; - - lan1 { - label = "green:lan1"; - gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; - }; - - lan2 { - label = "green:lan2"; - gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; - }; - - lan3 { - label = "green:lan3"; - gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; - }; - - lan4 { - label = "green:lan4"; - gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; - }; - - poe { - label = "red:poe"; - gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio55", "gpio56", "gpio57", "gpio60", - "gpio62", "gpio63", "gpio64", "gpio65", - "gpio66", "gpio67", "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <44 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enable USB power"; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - read-only; - size = <0x2000>; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0xa00000>; - }; - - partition@a00000 { - label = "ubi"; - reg = <0xa00000 0x7600000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - label = "lan4"; -}; - -&swport2 { - status = "okay"; - label = "lan3"; -}; - -&swport3 { - status = "okay"; - label = "lan2"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-lbr20.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-lbr20.dts deleted file mode 100644 index 4e5497cbc3..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-lbr20.dts +++ /dev/null @@ -1,516 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Netgear LBR20"; - compatible = "netgear,lbr20"; - - chosen { - bootargs-append = "ubi.mtd=ubi root=/dev/ubiblock0_0"; - }; - - aliases { - led-boot = &led_backlight_white; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_red; - label-mac-device = &gmac; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_green: led-status-green { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led_status_red: led-status-red { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - lte_rst { - gpio-export,name = "lte_rst"; - gpio-export,output = <1>; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - }; - - lte_pwrkey { - gpio-export,name = "lte_pwrkey"; - gpio-export,output = <1>; - gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; - }; - - lte_usb_boot { - gpio-export,name = "lte_usb_boot"; - gpio-export,output = <0>; - gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>; - }; - - lte_pwm { - gpio-export,name = "lte_pwm"; - gpio-export,output = <1>; - gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; - }; - - }; - - soc { - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - }; -}; - -&prng { - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -}; - -&crypto { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio-pinmux { - mux_mdio { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial-pinmux { - function = "blsp_uart0"; - pins = "gpio16", "gpio17"; - bias-disable; - }; - - nand_pins: nand-pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00100000>; - read-only; - }; - - partition@100000 { - label = "0:MIBIB"; - reg = <0x00100000 0x00100000>; - read-only; - }; - - partition@200000 { - label = "0:BOOTCONFIG"; - reg = <0x00200000 0x00100000>; - read-only; - }; - - partition@300000 { - label = "0:QSEE"; - reg = <0x00300000 0x00100000>; - read-only; - }; - - partition@400000 { - label = "0:QSEE_1"; - reg = <0x00400000 0x00100000>; - read-only; - }; - - partition@500000 { - label = "0:CDT"; - reg = <0x00500000 0x00080000>; - read-only; - }; - - partition@580000 { - label = "0:CDT_1"; - reg = <0x00580000 0x00080000>; - read-only; - }; - - partition@600000 { - label = "0:BOOTCONFIG1"; - reg = <0x00600000 0x00080000>; - read-only; - }; - - partition@680000 { - label = "0:APPSBLENV"; - reg = <0x00680000 0x00080000>; - }; - - partition@700000 { - label = "0:APPSBL"; - reg = <0x00700000 0x00200000>; - read-only; - }; - - partition@900000 { - label = "0:APPSBL_1"; - reg = <0x00900000 0x00200000>; - read-only; - }; - - partition@b00000 { - label = "0:ART"; - reg = <0x00b00000 0x00080000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - - }; - }; - - partition@b80000 { - label = "0:ART.bak"; - reg = <0x00b80000 0x00080000>; - read-only; - }; - - partition@c00000 { - label = "config"; - reg = <0x00c00000 0x00100000>; - read-only; - }; - - partition@d00000 { - label = "boarddata1"; - reg = <0x00d00000 0x00080000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - mac_address_lan: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - - mac_address_wan: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - mac_address_wlan_5g: macaddr@c { - compatible = "mac-base"; - reg = <0xc 0x6>; - #nvmem-cell-cells = <1>; - }; - - mac_address_wlan_2nd5g: macaddr@12 { - compatible = "mac-base"; - reg = <0x12 0x6>; - #nvmem-cell-cells = <1>; - }; - - }; - }; - - partition@d80000 { - label = "boarddata2"; - reg = <0x00d80000 0x00040000>; - read-only; - }; - - partition@dc0000 { - label = "pot"; - reg = <0x00dc0000 0x00100000>; - read-only; - }; - - partition@ec0000 { - label = "boarddata1.bak"; - reg = <0x00ec0000 0x00080000>; - read-only; - }; - - partition@f40000 { - label = "boarddata2.bak"; - reg = <0x00f40000 0x00040000>; - read-only; - }; - - partition@f80000 { - label = "language"; - reg = <0x00f80000 0x00300000>; - read-only; - }; - - partition@1280000 { - label = "cert"; - reg = <0x01280000 0x00080000>; - read-only; - }; - - partition@1300000 { - label = "ntgrdata"; - reg = <0x01300000 0x09300000>; - }; - - partition@a600000 { - label = "kernel"; - reg = <0x0a600000 0x00700000>; - }; - - partition@a9c0000 { - label = "ubi"; - reg = <0x0ad00000 0x05300000>; - }; - - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - - led-controller { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tlc59108"; /* really is tlc59208f */ - reg = <0x27>; - - led_backlight_green: led-backlight-green { - function = LED_FUNCTION_BACKLIGHT; - color = <LED_COLOR_ID_GREEN>; - reg = <0x0>; - linux,default-trigger = "default-off"; - }; - - led_backlight_red: led-backlight-red { - function = LED_FUNCTION_BACKLIGHT; - color = <LED_COLOR_ID_RED>; - reg = <0x1>; - linux,default-trigger = "default-off"; - }; - - led_backlight_blue: led-backlight-blue { - function = LED_FUNCTION_BACKLIGHT; - color = <LED_COLOR_ID_BLUE>; - reg = <0x2>; - linux,default-trigger = "default-off"; - }; - - led_backlight_white: led-backlight-white { - function = LED_FUNCTION_BACKLIGHT; - color = <LED_COLOR_ID_WHITE>; - reg = <0x3>; - linux,default-trigger = "default-off"; - }; - - }; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&mac_address_lan 0>; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; -}; - -&swport5 { - status = "okay"; - label = "lan2"; -}; - -&pcie0 { - status = "okay"; - perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5170000 5350000>; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_9000>, <&mac_address_wlan_2nd5g 0>; - qcom,ath10k-calibration-variant = "Netgear-LBR20"; - }; - }; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&mac_address_lan 0>; - qcom,ath10k-calibration-variant = "Netgear-LBR20"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5470000 5815000>; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&mac_address_wlan_5g 0>; - qcom,ath10k-calibration-variant = "Netgear-LBR20"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-le1.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-le1.dts deleted file mode 100644 index c4e7d0b207..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-le1.dts +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "YYeTs LE1"; - compatible = "yyets,le1"; - - aliases { - led-boot = &led_usb; - led-failsafe = &led_usb; - led-upgrade = &led_usb; - - ethernet0 = &swport5; - ethernet1 = &gmac; - label-mac-device = &gmac; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_usb: usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; - }; - - wlan2g { - label = "green:wlan2g"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "green:wlan5g"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&prng { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cells = <&precal_art_1000>; - nvmem-cell-names = "pre-calibration"; - qcom,ath10k-calibration-variant = "YYeTs-LE1"; -}; - -&wifi1 { - status = "okay"; - nvmem-cells = <&precal_art_5000>; - nvmem-cell-names = "pre-calibration"; - qcom,ath10k-calibration-variant = "YYeTs-LE1"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts deleted file mode 100644 index 4f0eaa625b..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts +++ /dev/null @@ -1,284 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2019, Robert Marko <robimarko@gmail.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Mikrotik Wireless Wire Dish LHGG-60ad"; - compatible = "mikrotik,lhgg-60ad"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - led-boot = &user; - led-failsafe = &user; - led-running = &user; - led-upgrade = &user; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - panic-indicator; - }; - - user: user { - label = "yellow:user"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - align-left { - label = "green:align-left"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - align-right { - label = "green:align-right"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - wlan-rx { - label = "green:align-down"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - wlan-tx { - label = "green:align-up"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi-0-pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - status = "okay"; - - m25p80@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "Qualcomm"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "RouterBoot"; - reg = <0x80000 0x80000>; - - hard_config { - read-only; - size = <0x2000>; - }; - - dtb_config { - read-only; - }; - - soft_config { - }; - }; - - partition@100000 { - compatible = "mikrotik,minor"; - label = "firmware"; - reg = <0x100000 0xf00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - /* wil6210 802.11ad card */ - wifi: wifi@1,0 { - status = "okay"; - /* wil6210 driver has no compatible */ - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -ðphy1 { - status = "disabled"; -}; - -ðphy2 { - status = "disabled"; -}; - -ðphy3 { - status = "disabled"; -}; - -ðphy4 { - status = "disabled"; -}; - -&psgmiiphy { - status = "disabled"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; - - /delete-property/ psgmii-ethphy; -}; - -&swport5 { - status = "okay"; - - label = "lan"; - phy-handle = <ðphy0>; - phy-mode = "rgmii-id"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts deleted file mode 100644 index 32f0473fb1..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ /dev/null @@ -1,363 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ASUS Lyra MAP-AC2200"; - compatible = "asus,map-ac2200"; - - aliases { - led-boot = &led_blue0; - led-failsafe = &led_red0; - led-running = &led_blue0; - led-upgrade = &led_red0; - ethernet1 = &swport4; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "CDT"; - reg = <0x200000 0x80000>; - read-only; - }; - - partition@280000 { - label = "APPSBL"; - reg = <0x280000 0x140000>; - read-only; - }; - - partition@3c0000 { - label = "APPSBLENV"; - reg = <0x3c0000 0x40000>; - read-only; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - enable_ext_pa_high { - gpio-hog; - gpios = <44 GPIO_ACTIVE_HIGH>, - <46 GPIO_ACTIVE_HIGH>; - output-high; - bias-pull-down; - line-name = "enable external PA output-high"; - }; - enable_ext_pa_low { - gpio-hog; - gpios = <45 GPIO_ACTIVE_HIGH>, - <47 GPIO_ACTIVE_HIGH>; - output-low; - bias-pull-down; - line-name = "enable external PA output-low"; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5470000 5875000>; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&usb2_hs_phy { - /* Bluetooth module attached via USB */ - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - /* 9-channel RGB LED controller */ - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - /* - * There is only one single extremely bright RGB-LED. - * The RGB-color channels are running in parallel to - * increase the current delivery capabilities beyond - * what a single PWM-output of the controller can do. - */ - - led_blue0: led@0 { - chan-name = "blue-0"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <0>; - color = <LED_COLOR_ID_BLUE>; - function-enumerator = <0>; - }; - - led@1 { - chan-name = "blue-1"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <1>; - color = <LED_COLOR_ID_BLUE>; - function-enumerator = <1>; - }; - - led@2 { - chan-name = "blue-2"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <2>; - color = <LED_COLOR_ID_BLUE>; - function-enumerator = <2>; - }; - - led_green0: led@3 { - chan-name = "green-0"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <3>; - color = <LED_COLOR_ID_GREEN>; - function-enumerator = <0>; - }; - - led@4 { - chan-name = "green-1"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <4>; - color = <LED_COLOR_ID_GREEN>; - function-enumerator = <1>; - }; - - led@5 { - chan-name = "green-2"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <5>; - color = <LED_COLOR_ID_GREEN>; - function-enumerator = <2>; - }; - - led_red0: led@6 { - chan-name = "red-0"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <6>; - color = <LED_COLOR_ID_RED>; - function-enumerator = <0>; - }; - - led@7 { - chan-name = "red-1"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <7>; - color = <LED_COLOR_ID_RED>; - function-enumerator = <1>; - }; - - led@8 { - chan-name = "red-2"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - reg = <8>; - color = <LED_COLOR_ID_RED>; - function-enumerator = <2>; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "wan"; -}; - -&swport5 { - status = "okay"; - - label = "lan"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf18a.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf18a.dts deleted file mode 100644 index 6987515720..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf18a.dts +++ /dev/null @@ -1,490 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2022, Marcin Gajda <mgajda@o2.pl>. - - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ZTE MF18A"; - compatible = "zte,mf18a"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - /* - * bootargs forced by u-boot bootipq command: - * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' - */ - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - - led_internal: led-0 { - label = "blue:internal"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led_power: led-1 { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - led-2 { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - led-3 { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; - }; - - led-4 { - function = LED_FUNCTION_WLAN; - label = "blue:smart"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - led-5 { - label = "red:smart"; - gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; - }; - - resetzwave { - label = "resetzwave"; - gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* u-boot is looking for "n25q128a11" property */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0 0>; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - - label = "wan"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0 1>; -}; - -&swport3 { - status = "okay"; - - label = "lan"; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "ART"; - reg = <0xa0000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - }; - }; - - partition@120000 { - label = "mac"; - reg = <0x120000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_config_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1a0000 { - label = "reserved2"; - reg = <0x1a0000 0xc0000>; - read-only; - }; - - partition@260000 { - label = "cfg-param"; - reg = <0x260000 0x400000>; - read-only; - }; - - partition@660000 { - label = "log"; - reg = <0x660000 0x400000>; - }; - - partition@a60000 { - label = "oops"; - reg = <0xa60000 0xa0000>; - }; - - partition@b00000 { - label = "reserved3"; - reg = <0xb00000 0x500000>; - read-only; - }; - - partition@1000000 { - label = "web"; - reg = <0x1000000 0x800000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0x1d00000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x2800000>; - - }; - partition@7600000 { - label = "iot-db"; - reg = <0x7600000 0xa00000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 2>; - qcom,ath10k-calibration-variant = "ZTE-MF18A"; -}; - -//* This node is used for 5Ghz on QCA9982 */ -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>; - clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "pci168c,0040"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_9000>, <&macaddr_config_0 3>; - qcom,ath10k-calibration-variant = "ZTE-MF18A"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - - diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts deleted file mode 100644 index 54353cac58..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf282plus.dts +++ /dev/null @@ -1,454 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ZTE MF282Plus"; - compatible = "zte,mf282plus"; - - aliases { - led-boot = &led_internal; - led-failsafe = &led_internal; - led-running = &led_internal; - led-upgrade = &led_internal; - }; - - chosen { - /* - * bootargs forced by u-boot bootipq command: - * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' - */ - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - modem { - gpio-export,name = "modem-reset"; - gpio-export,output = <0>; - gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_internal: led-0 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - label = "blue:internal_led"; - default-state = "keep"; - }; - - led-1 { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wifi { - label = "wifi"; - linux,code = <KEY_RFKILL>; - gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* u-boot is looking for "n25q128a11" property */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0 0>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "ART"; - reg = <0xa0000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@120000 { - label = "mac"; - reg = <0x120000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_config_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1a0000 { - label = "reserved2"; - reg = <0x1a0000 0xc0000>; - read-only; - }; - - partition@260000 { - label = "cfg-param"; - reg = <0x260000 0x400000>; - read-only; - }; - - partition@660000 { - label = "log"; - reg = <0x660000 0x400000>; - }; - - partition@a60000 { - label = "oops"; - reg = <0xa60000 0xa0000>; - }; - - partition@b00000 { - label = "reserved3"; - reg = <0xb00000 0x500000>; - read-only; - }; - - partition@1000000 { - label = "web"; - reg = <0x1000000 0x800000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0x1d00000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x2800000>; - }; - - partition@7600000 { - label = "extra-cfg"; - reg = <0x7600000 0xa00000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -/* - * The MD5 sum of the board file of the MF286D is identical to the board - * file in the OEM firmware - */ -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 1>; - qcom,ath10k-calibration-variant = "zte,mf286d"; -}; - -/* - * The MD5 sum of the board file of the MF286D is identical to the board - * file in the OEM firmware - */ -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_config_0 1>; - qcom,ath10k-calibration-variant = "zte,mf286d"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts deleted file mode 100644 index 61cbdba0d1..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts +++ /dev/null @@ -1,453 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ZTE MF286D"; - compatible = "zte,mf286d"; - - aliases { - led-boot = &led_internal; - led-failsafe = &led_internal; - led-running = &led_internal; - led-upgrade = &led_internal; - }; - - chosen { - /* - * bootargs forced by u-boot bootipq command: - * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' - */ - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - - led_internal: led-0 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - label = "blue:internal_led"; - default-state = "keep"; - }; - - led-1 { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wifi { - label = "wifi"; - linux,code = <KEY_RFKILL>; - gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* u-boot is looking for "n25q128a11" property */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0 0>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "ART"; - reg = <0xa0000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@120000 { - label = "mac"; - reg = <0x120000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_config_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1a0000 { - label = "reserved2"; - reg = <0x1a0000 0xc0000>; - read-only; - }; - - partition@260000 { - label = "cfg-param"; - reg = <0x260000 0x400000>; - read-only; - }; - - partition@660000 { - label = "log"; - reg = <0x660000 0x400000>; - }; - - partition@a60000 { - label = "oops"; - reg = <0xa60000 0xa0000>; - }; - - partition@b00000 { - label = "reserved3"; - reg = <0xb00000 0x500000>; - read-only; - }; - - partition@1000000 { - label = "web"; - reg = <0x1000000 0x800000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0x1d00000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x3200000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - - label = "lan4"; -}; - -&swport3 { - status = "okay"; - - label = "lan3"; -}; - -&swport4 { - status = "okay"; - - label = "lan2"; -}; - -&swport5 { - status = "okay"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_config_0 1>; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 2>; - qcom,ath10k-calibration-variant = "zte,mf286d"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_config_0 3>; - qcom,ath10k-calibration-variant = "zte,mf286d"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf289f.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf289f.dts deleted file mode 100644 index 7c0194ccc0..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf289f.dts +++ /dev/null @@ -1,443 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. -// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "ZTE MF289F"; - compatible = "zte,mf289f"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - chosen { - /* - * bootargs forced by u-boot bootipq command: - * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait' - */ - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - /* - * This node is used to restart modem module to avoid anomalous - * behaviours on initial communication. - */ - gpio-restart { - compatible = "gpio-restart"; - gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - - led_status: led-0 { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - }; - - led-1 { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - key-reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - - key-wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; -}; - -&prng { - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; -}; - -&watchdog { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, - <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "0:reserved1"; - reg = <0x1b0000 0x50000>; - read-only; - }; - }; - }; - - spi-nand@1 { /* flash@1 ? */ - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fota-flag"; - reg = <0x0 0xa0000>; - read-only; - }; - - partition@a0000 { - label = "ART"; - reg = <0xa0000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@120000 { - label = "mac"; - reg = <0x120000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mac_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1a0000 { - label = "reserved2"; - reg = <0x1a0000 0xc0000>; - read-only; - }; - - partition@260000 { - label = "cfg-param"; - reg = <0x260000 0x400000>; - read-only; - }; - - partition@660000 { - label = "log"; - reg = <0x660000 0x400000>; - }; - - partition@a60000 { - label = "oops"; - reg = <0xa60000 0xa0000>; - }; - - partition@b00000 { - label = "reserved3"; - reg = <0xb00000 0x500000>; - read-only; - }; - - partition@1000000 { - label = "web"; - reg = <0x1000000 0x800000>; - }; - - partition@1800000 { - label = "rootfs"; - reg = <0x1800000 0x1d00000>; - }; - - partition@3500000 { - label = "data"; - reg = <0x3500000 0x1900000>; - }; - - partition@4e00000 { - label = "fota"; - reg = <0x4e00000 0x3200000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_mac_0 0>; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - - label = "wan"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_mac_0 1>; -}; - -&swport5 { - status = "okay"; - - label = "lan"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12", "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0 2>; - qcom,ath10k-calibration-variant = "zte,mf289f"; -}; - -/* This node is used only on AT2 version for 5Ghz on IPQ4019 with board-id=21 */ -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0 3>; - qcom,ath10k-calibration-variant = "zte,mf289f"; -}; - -/* This node is used only on AT1 version for 5Ghz on QCA9984 */ -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>; - clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_mac_0 4>; - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "zte,mf289f"; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts deleted file mode 100644 index ab9a05c788..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mr8300.dts +++ /dev/null @@ -1,86 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/leds/common.h> - -#include "qcom-ipq4019-xx8300.dtsi" - -/ { - model = "Linksys MR8300 (Dallas)"; - compatible = "linksys,mr8300", "qcom,ipq4019"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_red; - led-running = &led_blue; - led-upgrade = &led_amber; - serial0 = &blsp1_uart1; - }; - - // Top panel LEDs, above Linksys logo - leds { - compatible = "gpio-leds"; - - led_red: red { - function = LED_FUNCTION_ALARM; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - - led_amber: amber { - function = LED_FUNCTION_PROGRAMMING; - color = <LED_COLOR_ID_AMBER>; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_blue: blue { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - // On back panel, above USB socket - - led_usb: usb { - function = LED_FUNCTION_USB; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb3_port1>, <&usb3_port2>, - <&usb2_port1>; - linux,default-trigger = "usbport"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-mr8300-v0-fcc"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5330000>; - qcom,ath10k-calibration-variant = "linksys-mr8300-v0-fcc"; -}; - -&wifi2 { - status = "okay"; - ieee80211-freq-limit = <5490000 5835000>; - qcom,ath10k-calibration-variant = "linksys-mr8300-v0-fcc"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-ncp-hg100-cellular.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-ncp-hg100-cellular.dts deleted file mode 100644 index ea27defea3..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-ncp-hg100-cellular.dts +++ /dev/null @@ -1,635 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Sony NCP-HG100/Cellular"; - compatible = "sony,ncp-hg100-cellular"; - - aliases { - led-boot = &led_cloud_green; - led-failsafe = &led_cloud_red; - led-running = &led_cloud_green; - led-upgrade = &led_cloud_green; - label-mac-device = &gmac; - }; - - chosen { - bootargs = "console=ttyMSM0,115200n8 root=/dev/mmcblk0p15 rootfstype=squashfs,ext4"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; - }; - - soc { - tcsr@1949000 { - status = "okay"; - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - status = "okay"; - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - status = "okay"; - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - dma@7984000 { - status = "okay"; - }; - }; - - keys-repeat { - compatible = "gpio-keys"; - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - autorepeat; - - key-volup { - label = "volume up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; - linux,input-type = <EV_KEY>; - }; - - key-voldown { - label = "volume down"; - linux,code = <KEY_VOLUMEDOWN>; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - linux,input-type = <EV_KEY>; - }; - - key-alexatrigger { - label = "alexa trigger"; - linux,code = <BTN_0>; - gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; - linux,input-type = <EV_KEY>; - }; - - key-mute { - label = "mic mute"; - linux,code = <BTN_1>; - gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - key-reset { - label = "reset"; - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - key-wps { - label = "setup"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; -}; - -&tlmm { - pinctrl-0 = <&bt_pins>, <&aud_pins>, <&mcu_pins>; - pinctrl-names = "default"; - - /* - * uart0 is shared for debug console and Z-Wave, - * use only for debug console in OpenWrt. - * - * 1: debug console - * 0: Z-Wave - */ - uart0_ctrl_pins: uart0_ctrl_pinmux { - mux { - pins = "gpio15"; - function = "gpio"; - output-high; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - /* - * reset pin for Z-Wave - * active-low, >= 20ns - */ - zwave_pins: zwave_pinmux { - mux { - pins = "gpio59"; - function = "gpio"; - output-high; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", - "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - bt_pins: bt_pinmux { - mux_reset { - pins = "gpio66"; - function = "gpio"; - output-high; - }; - - mux_pwr { - pins = "gpio68"; - function = "gpio"; - output-high; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "blsp_i2c1"; - bias-disable; - }; - }; - - keys_pins: keys_pinmux { - mux_1 { - pins = "gpio39", "gpio40", "gpio42", "gpio47"; - function = "gpio"; - bias-disable; - }; - - mux_2 { - pins = "gpio2"; - function = "gpio"; - input; - }; - }; - - sd_pins: sd_pins { - mux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <4>; - }; - - mux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - mux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <4>; - bias-disable; - }; - }; - - aud_pins: aud_pinmux { - mux { - pins = "gpio48", "gpio49", "gpio50", "gpio51"; - function = "aud_pin"; - }; - }; - - alc1304_pins: alc1304_pinmux { - mux_1 { - pins = "gpio44"; - function = "gpio"; - bias-disable; - }; - - mux_2 { - pins = "gpio45"; - function = "gpio"; - bias-disable; - }; - }; - - cx2902x_reset: cx2902x_pinmux { - mux_1 { - pins = "gpio64"; - function = "gpio"; - bias-disable; - }; - - mux_2 { - pins = "gpio65"; - function = "gpio"; - bias-disable; - }; - }; - - lte_pins: lte_pinmux { - mux_en { - pins = "gpio20"; - function = "gpio"; - output-high; - }; - - mux_reset { - pins = "gpio35"; - function = "gpio"; - input; - }; - }; - - usb3_pins: usb3_pinmux { - mux_en { - pins = "gpio36"; - function = "gpio"; - output-high; - }; - - mux_flt { - pins = "gpio4"; - function = "gpio"; - input; - }; - }; - - mcu_pins: mcu_pinmux { - mux_boot { - pins = "gpio38"; - function = "gpio"; - output-low; - }; - - mux_reset { - pins = "gpio5"; - function = "gpio"; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c4 { - /* - * There is no driver for the following devices: - * - CY8C4014LQI@14 : Touch-Sensor for buttons on top - * - MINI54FDE@15 : MCU for Fan/RGB LED/Thermal control - * - ALC5629@18 : I2S/PCM Audio DAC - * - CX20924@41 : Voice Input Processor - */ - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - compatible = "ti,lp55231"; - reg = <0x32>; - clock-mode = /bits/ 8 <0>; - enable-gpio = <&tlmm 1 GPIO_ACTIVE_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - chan-name = "green:wan"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; - }; - - led@1 { - chan-name = "blue:wan"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x1>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WAN; - }; - - led@2 { - chan-name = "green:lan"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_LAN; - }; - - led@3 { - chan-name = "blue:lan"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x3>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_LAN; - }; - - led@4 { - chan-name = "green:wlan-2"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x4>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN; - function-enumerator = <2>; - linux,default-trigger = "phy0tpt"; - }; - - led@5 { - chan-name = "blue:wlan-2"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x5>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <2>; - }; - - led@6 { - chan-name = "red:wan"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x6>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WAN; - }; - - led@7 { - chan-name = "red:lan"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x7>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_LAN; - }; - - led@8 { - chan-name = "red:wlan-2"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x8>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WLAN; - function-enumerator = <2>; - }; - }; - - led-controller@33 { - compatible = "ti,lp55231"; - reg = <0x33>; - clock-mode = /bits/ 8 <0>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - chan-name = "green:wlan-5"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x0>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WLAN; - linux,default-trigger = "phy1tpt"; - function-enumerator = <5>; - }; - - led@1 { - chan-name = "blue:wlan-5"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x1>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <5>; - }; - - led@2 { - chan-name = "green:wan-4"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x2>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */ - function-enumerator = <4>; /* WWAN/LTE/4G */ - }; - - led@3 { - chan-name = "blue:wan-4"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x3>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */ - function-enumerator = <4>; /* WWAN/LTE/4G */ - }; - - led_cloud_green: led@4 { - chan-name = "green:power"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x4>; - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_POWER; - }; - - led@5 { - chan-name = "blue:power"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x5>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - }; - - led@6 { - chan-name = "red:wlan-5"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x6>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WLAN; - function-enumerator = <5>; - }; - - led@7 { - chan-name = "red:wan-4"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x7>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WAN; /* WWAN/LTE/4G */ - function-enumerator = <4>; /* WWAN/LTE/4G */ - }; - - led_cloud_red: led@8 { - chan-name = "red:power"; - led-cur = /bits/ 8 <50>; - max-cur = /bits/ 8 <100>; - reg = <0x8>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_POWER; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>, <&uart0_ctrl_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; -}; - -&prng { - status = "okay"; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - vqmmc-supply = <&vqmmc>; - non-removable; - #address-cells = <1>; - #size-cells = <0>; - - emmc@0 { - compatible = "mmc-card"; - reg = <0>; - }; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; - - pinctrl-0 = <&usb3_pins>, <<e_pins>; - pinctrl-names = "default"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - device@1 { - compatible = "usb1bc7,1900"; - reg = <1>; - }; - }; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "lan"; -}; - -&swport5 { - status = "okay"; - label = "wan"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Sony-NCP-HG100-Cellular"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Sony-NCP-HG100-Cellular"; -}; - -&watchdog { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-oap100.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-oap100.dts deleted file mode 100644 index 2080a34e2f..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-oap100.dts +++ /dev/null @@ -1,342 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "EdgeCore OAP-100"; - compatible = "edgecore,oap100"; - - aliases { - led-boot = &led_system; - led-failsafe = &led_system; - led-running = &led_system; - led-upgrade = &led_system; - }; - - chosen { - bootargs-append = " root=/dev/ubiblock0_1"; - }; - - soc { - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - key { - compatible = "gpio-keys"; - - button@1 { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_system: led_system { - label = "green:system"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - }; - - led_2g { - label = "blue:wlan2g"; - gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; - }; - - led_5g { - label = "blue:wlan5g"; - gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usb { - gpio-export,name = "usb-power"; - gpio-export,output = <1>; - gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; - }; - - poe { - gpio-export,name = "poe-power"; - gpio-export,output = <0>; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - linux,modalias = "m25p80", "gd25q256"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs"; - reg = <0x00000000 0x4000000>; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "Edgecore OAP100"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "Edgecore OAP100"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi deleted file mode 100644 index 849df64201..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi +++ /dev/null @@ -1,345 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - aliases { - led-boot = &led_status_white; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_blue; - label-mac-device = &gmac; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led-1 { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_status_green: led-2 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; - }; - - led_status_red: led-3 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - }; - - led_status_blue: led-4 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; - }; - - led_status_white: led-5 { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - bias-disable; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <10>; - }; - - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - pinmux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - led-controller@27 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tlc59108"; /* really is tlc59208f */ - reg = <0x27>; - - led0@0 { - label = "rgb:led0"; - reg = <0x0>; - linux,default-trigger = "default-on"; - }; - - led1@1 { - label = "rgb:led1"; - reg = <0x1>; - linux,default-trigger = "default-on"; - }; - - led2@2 { - label = "rgb:led2"; - reg = <0x2>; - linux,default-trigger = "default-on"; - }; - - led3@3 { - label = "rgb:led3"; - reg = <0x3>; - linux,default-trigger = "default-on"; - }; - - led4@4 { - label = "rgb:led4"; - reg = <0x4>; - linux,default-trigger = "default-on"; - }; - - led5@5 { - label = "rgb:led5"; - reg = <0x5>; - linux,default-trigger = "default-on"; - }; - - led6@6 { - label = "rgb:led6"; - reg = <0x6>; - linux,default-trigger = "default-on"; - }; - - led7@7 { - label = "rgb:led7"; - reg = <0x7>; - linux,default-trigger = "default-on"; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - - label = "wan"; -}; - -&swport2 { - status = "okay"; - - label = "lan1"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan3"; -}; - -ðphy4 { - status = "disabled"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60"; - }; - }; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts deleted file mode 100644 index ed333c4990..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-pa2200.dts +++ /dev/null @@ -1,256 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org> - * Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai> - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Plasma Cloud PA2200"; - compatible = "plasmacloud,pa2200"; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART >; - }; - }; - - aliases { - led-boot = &led_power_orange; - led-failsafe = &led_status_blue; - led-running = &led_power_orange; - led-upgrade = &led_status_blue; - label-mac-device = &swport4; - }; - - leds { - compatible = "gpio-leds"; - - led_power_orange: power_orange { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - }; - - 2g_blue { - label = "blue:2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - 2g_green { - label = "green:5g1"; - gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - 5g2_green { - label = "green:5g2"; - gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy2tpt"; - }; - - led_status_blue: status_blue { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - /* partitions are passed via bootloader */ - partitions { - partition-art { - label = "0:ART"; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200"; - ieee80211-freq-limit = <5170000 5350000>; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_9000>; - }; - }; -}; - -&mdio { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "ethernet1"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0>; -}; - -&swport5 { - status = "okay"; - label = "ethernet2"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200"; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200"; - ieee80211-freq-limit = <5470000 5875000>; - - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts deleted file mode 100644 index 0896374ab2..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-r619ac.dtsi" - -/ { - model = "P&W R619AC 128M"; - compatible = "p2w,r619ac-128m"; -}; - -&nand_rootfs { - /* - * Watch out: stock MIBIB is set up for a 64MiB chip. - * If a 128MiB flash chip is used, make sure to have - * the right values in MIBIB or the device might not - * boot. - */ - reg = <0x0 0x8000000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac-64m.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac-64m.dts deleted file mode 100644 index 6c8821a90e..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac-64m.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-r619ac.dtsi" - -/ { - model = "P&W R619AC 64M"; - compatible = "p2w,r619ac-64m"; -}; - -&nand_rootfs { - reg = <0x0 0x4000000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi deleted file mode 100644 index 90e5455b25..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi +++ /dev/null @@ -1,387 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; - }; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_sys: led-0 { - gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - }; - - led-1 { - gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <0>; - }; - - led-2 { - gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <1>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - nand_rootfs: partition@0 { - label = "ubi"; - /* reg defined in 64M/128M variant dts. */ - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; - perst-gpio = <&tlmm 4 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 40 GPIO_ACTIVE_HIGH>; - - /* Free slot for use */ - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&sdhci { - pinctrl-0 = <&sd_0_pins>; - pinctrl-names = "default"; - vqmmc-supply = <&vqmmc>; - status = "okay"; -}; - -&tlmm { - pcie_pins: pcie_pinmux { - mux { - pins = "gpio2"; - function = "gpio"; - output-low; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - sd_0_pins: sd_0_pinmux { - mux_1 { - pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio28"; - function = "sdio"; - drive-strength = <10>; - }; - - mux_2 { - pins = "gpio27"; - function = "sdio"; - drive-strength = <16>; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; -}; - -ðphy0 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy1 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy2 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy3 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -ðphy4 { - qcom,single-led-1000; - qcom,single-led-100; - qcom,single-led-10; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - - label = "lan4"; -}; - -&swport2 { - status = "okay"; - - label = "lan3"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&vqmmc { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "P&W-R619AC"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "P&W-R619AC"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbr40.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbr40.dts deleted file mode 100644 index 26e87b808c..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbr40.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-orbi.dtsi" - -/ { - model = "NETGEAR RBR40"; - compatible = "netgear,rbr40"; - - chosen { - bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts deleted file mode 100644 index a803999804..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-orbi.dtsi" - -/ { - model = "NETGEAR RBR50"; - compatible = "netgear,rbr50"; - - chosen { - bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; - }; - - soc { - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - }; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbs40.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbs40.dts deleted file mode 100644 index 2dfa0c9654..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbs40.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-orbi.dtsi" - -/ { - model = "NETGEAR RBS40"; - compatible = "netgear,rbs40"; - - chosen { - bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts deleted file mode 100644 index 4d0a9132c6..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-orbi.dtsi" - -/ { - model = "NETGEAR RBS50"; - compatible = "netgear,rbs50"; - - chosen { - bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; - }; - - soc { - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - }; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rt-ac42u.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rt-ac42u.dts deleted file mode 100644 index 70849d71d6..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rt-ac42u.dts +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "ASUS RT-AC42U"; - compatible = "asus,rt-ac42u"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256MB */ - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "wps"; - gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: led-0 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_STATUS; - gpios = <&tlmm 40 GPIO_ACTIVE_LOW>; - }; - - led-1 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WAN; - gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "90000.mdio-1:04:link"; - }; - - led-2 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_WAN; - gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - }; - - led-3 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <0>; - gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - led-4 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_WLAN; - function-enumerator = <1>; - gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - led-5 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - - led-6 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - }; - - led-7 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - }; - - led-8 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_LAN; - function-enumerator = <4>; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - serial_0_pins: serial0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio55", "gpio56", "gpio57", "gpio60", - "gpio62", "gpio63", "gpio64", "gpio65", - "gpio66", "gpio67", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00080000>; - read-only; - }; - partition@80000 { - label = "MIBIB"; - reg = <0x00080000 0x00080000>; - read-only; - }; - partition@100000 { - label = "QSEE"; - reg = <0x00100000 0x00100000>; - read-only; - }; - partition@200000 { - label = "CDT"; - reg = <0x00200000 0x00080000>; - read-only; - }; - partition@280000 { - label = "APPSBL"; - reg = <0x00280000 0x00140000>; - read-only; - }; - partition@3C0000 { - label = "APPSBLENV"; - reg = <0x003C0000 0x00040000>; - read-only; - }; - partition@400000 { - label = "ubi"; - reg = <0x00400000 0x07C00000>; - }; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-RT-AC42U"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - qcom,ath10k-calibration-variant = "ASUS-RT-AC42U"; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts deleted file mode 100644 index e2df1d1997..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts +++ /dev/null @@ -1,397 +0,0 @@ -// SPDX-License-Identifier: ISC -// Copyright (c) 2015, The Linux Foundation. All rights reserved. -// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>. -// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>. - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Cell C RTL30VW"; - compatible = "cellc,rtl30vw"; - - aliases { - led-boot = &led_power_blue; - led-failsafe = &led_power_red; - led-running = &led_power_blue; - led-upgrade = &led_power_red; - }; - - chosen { - bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <2>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power_blue: power_blue { - gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - default-state = "on"; - }; - - led_power_red: power_red { - gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_RED>; - }; - - tp28 { - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - label = "ext:tp28"; - default-state = "keep"; - }; - - tp27 { - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - label = "ext:tp27"; - default-state = "keep"; - }; - - wlan2g { - gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>; - label = "blue:wlan2g"; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>; - label = "blue:wlan5g"; - linux,default-trigger = "phy1tpt"; - }; - - wps { - gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_WPS; - color = <LED_COLOR_ID_BLUE>; - }; - - voip { - gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>; - label = "blue:voip"; - }; - - s1 { - gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>; - label = "blue:s1"; - }; - - s2 { - gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>; - label = "blue:s2"; - }; - - s3 { - gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>; - label = "blue:s3"; - }; - - s4 { - gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>; - label = "blue:s4"; - }; - - signal { - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - label = "red:signal"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = <KEY_RESTART>; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - /*"n25q128a11" is required for proper nand recognition in u-boot. */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - partition@180000 { - label = "0:BOOTCONFIG"; - reg = <0x180000 0x10000>; - read-only; - }; - }; - }; - - flash@1 { - /* - * Factory U-boot looks in 0:BOOTCONFIG partition for active - * partitions settings and mangle partition config. So kernel - * /kernel_1 and rootfs/rootfs_1 pairs can be swaped. - * It isn't a problem but we never can be sure where OFW put - * factory images. "spinand,mt29f" value is required for proper - * nand recognition in u-boot. - */ - compatible = "spi-nand","spinand,mt29f"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x2000000>; - }; - - partition@2400000 { - label = "kernel_1"; - reg = <0x2400000 0x400000>; - }; - - partition@2800000 { - label = "rootfs_1"; - reg = <0x2800000 0x2000000>; - }; - - partition@4800000 { - label = "ubifs"; - reg = <0x4800000 0x3800000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "cellc,rtl30vw"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "cellc,rtl30vw"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport3 { - status = "okay"; - - label = "lan1"; -}; - -&swport4 { - status = "okay"; - - label = "lan2"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-srr60.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-srr60.dts deleted file mode 100644 index 80bcb2e204..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-srr60.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-orbi.dtsi" - -/ { - model = "NETGEAR SRR60"; - compatible = "netgear,srr60"; - - chosen { - bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-srs60.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-srs60.dts deleted file mode 100644 index 65bb7ac397..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-srs60.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-orbi.dtsi" - -/ { - model = "NETGEAR SRS60"; - compatible = "netgear,srs60"; - - chosen { - bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait"; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts deleted file mode 100644 index 08c55d0c27..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts +++ /dev/null @@ -1,91 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019-u4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Unielec U4019 (32M)"; - compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi deleted file mode 100644 index c7439b87ec..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi +++ /dev/null @@ -1,216 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - compatible = "unielec,u4019","qcom,ipq4019"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - watchdog@b017000 { - status = "okay"; - }; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - serial0 = &blsp1_uart1; - serial1 = &blsp1_uart2; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_status: led2 { - label = "green:led2"; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pinmux { - mux { - function = "gpio"; - pins = "gpio68"; - bias-disabled; - output-low; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts deleted file mode 100644 index b76c52cd0a..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-whw03v2.dts +++ /dev/null @@ -1,514 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Linksys WHW03 V2 (Velop)"; - compatible = "linksys,whw03v2", "qcom,ipq4019"; - - aliases { - led-boot = &led_blue; - led-failsafe = &led_red; - led-running = &led_blue; - led-upgrade = &led_red; - }; - - // The arguments rootfstype and ro are needed - // to override the default bootargs - chosen { - bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - stdout-path = &blsp1_uart1; - }; - - soc { - ess-tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; - - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - - -&tlmm { - mdio_pins: mdio-pinmux { - mux-1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux-2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - i2c_0_pins: i2c-0-pinmux { - mux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - bias-disable; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1-pinmux { - mux { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi-0-pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - mux-cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - spi_1_pins: spi-1-pinmux { - mux-1 { - function = "blsp_spi1"; - pins = "gpio44", "gpio46","gpio47"; - bias-disable; - }; - - mux-2 { - pins = "gpio31", "gpio45", "gpio49"; - function = "gpio"; - bias-pull-up; - output-high; - }; - - host-interrupt { - pins = "gpio42"; - function = "gpio"; - input; - }; - }; - - wifi_0_pins: wifi0-pinmux { - btcoexist { - bias-pull-up; - drive-strength = <6>; - function = "gpio"; - output-high; - pins = "gpio52"; - }; - }; - - zigbee-0 { - gpio-hog; - gpios = <29 GPIO_ACTIVE_HIGH>; - bias-disable; - output-low; - }; - - zigbee-1 { - gpio-hog; - gpios = <50 GPIO_ACTIVE_HIGH>; - bias-disable; - input; - }; - - bluetooth-enable { - gpio-hog; - gpios = <32 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy-reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; -}; - -ðphy0 { - status = "disabled"; -}; - -ðphy1 { - status = "disabled"; -}; - -ðphy2 { - status = "disabled"; -}; - -ðphy3 { - reg = <0x1b>; -}; - -ðphy4 { - reg = <0x1c>; -}; - -&psgmiiphy { - reg = <0x1d>; -}; - -&watchdog { - status = "okay"; -}; - -&prng { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - num-channels = <4>; - qcom,num-ees = <2>; - - status = "okay"; -}; - -&crypto { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; -}; - -&blsp1_uart2 { - status = "okay"; - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - - bluetooth { - compatible = "csr,8811"; - - enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; - }; -}; - -&blsp1_spi2 { - pinctrl-0 = <&spi_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - - zigbee@0 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "silabs,em3581"; - reg = <0>; - spi-max-frequency = <12000000>; - }; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - // RGB LEDs - pca9633: led-controller@62 { - compatible = "nxp,pca9633"; - nxp,hw-blink; - reg = <0x62>; - #address-cells = <1>; - #size-cells = <0>; - - led_red: red@0 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_INDICATOR; - reg = <0>; - }; - - led_green: green@1 { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - reg = <1>; - }; - - led_blue: blue@2 { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_INDICATOR; - reg = <2>; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "MIBIB"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "QSEE"; - reg = <0x200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "CDT"; - reg = <0x300000 0x80000>; - read-only; - }; - - partition@380000 { - label = "APPSBL"; - reg = <0x380000 0x200000>; - read-only; - }; - - partition@580000 { - label = "ART"; - reg = <0x580000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x9000 0x2f20>; - }; - }; - }; - - partition@600000 { - label = "u_env"; - reg = <0x600000 0x80000>; - }; - - partition@680000 { - label = "s_env"; - reg = <0x680000 0x40000>; - }; - - partition@6c0000 { - label = "devinfo"; - reg = <0x6c0000 0x40000>; - read-only; - }; - - partition@700000 { - label = "kernel"; - reg = <0x700000 0xa100000>; - }; - - partition@d00000 { - label = "rootfs"; - reg = <0xd00000 0x9b00000>; - }; - - partition@a800000 { - label = "alt_kernel"; - reg = <0xa800000 0xa100000>; - }; - - partition@ae00000 { - label = "alt_rootfs"; - reg = <0xae00000 0x9b00000>; - }; - - partition@14900000 { - label = "sysdiag"; - reg = <0x14900000 0x200000>; - read-only; - }; - - partition@14b00000 { - label = "syscfg"; - reg = <0x14b00000 0xb500000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 40 GPIO_ACTIVE_LOW>; - clkreq-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "lan"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&swport5 { - status = "okay"; - label = "wan"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0 0>; -}; - -&wifi0 { - pinctrl-0 = <&wifi_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - - qcom,coexist-support = <1>; - qcom,coexist-gpio-pin = <0x34>; - - qcom,ath10k-calibration-variant = "linksys-whw03v2"; - - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_gmac0 1>; -}; - -&wifi1 { - status = "okay"; - - ieee80211-freq-limit = <5170000 5330000>; - qcom,ath10k-calibration-variant = "linksys-whw03v2"; - - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_gmac0 2>; -}; - -&wifi2 { - status = "okay"; - - ieee80211-freq-limit = <5490000 5835000>; - qcom,ath10k-calibration-variant = "linksys-whw03v2"; - - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_9000>, <&macaddr_gmac0 3>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts deleted file mode 100644 index f2e39c87ae..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wifi.dts +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2016, 2018 The Linux Foundation. All rights reserved. - * Copyright (c) 2016 Google, Inc - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Google WiFi (Gale)"; - compatible = "google,wifi", "google,gale-v2", "qcom,ipq4019"; - - aliases { - label-mac-device = &gmac0; - led-boot = &led0_blue; - led-failsafe = &led0_red; - led-running = &led0_blue; - led-upgrade = &led0_red; - }; - - chosen { - /* - * rootwait: in case we're booting from slow/async USB storage. - */ - bootargs-append = " rootwait"; - stdout-path = &blsp1_uart1; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512MB */ - }; - - soc { - edma@c080000 { - /* - * Factory bootloader (depthcharge) will fail to boot - * if this exact path (soc/edma@c080000/gmac0) doesn't - * exist. - */ - gmac0: gmac0 { - }; - - /* - * Factory bootloader (depthcharge) will fail to boot - * if this exact path (soc/edma@c080000/gmac1) doesn't - * exist. - */ - gmac1 { - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&fw_pinmux>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&scm { - qcom,sdi-enabled; -}; - -&tlmm { - fw_pinmux: fw_pinmux { - wp { - pins = "gpio53"; - output-low; - }; - recovery { - pins = "gpio57"; - function = "gpio"; - bias-none; - }; - developer { - pins = "gpio41"; - bias-none; - }; - }; - - reset802_15_4 { - pins = "gpio60"; - }; - - led_reset { - pins = "gpio22"; - output-high; - }; - - sys_reset { - pins = "gpio19"; - output-high; - }; - - rx_active { - pins = "gpio43"; - bias-pull,down; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14","gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14","gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - spi_1_pins: spi_1_pinmux { - pinmux { - function = "blsp_spi1"; - pins = "gpio44", "gpio46","gpio47"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio45"; - }; - pinconf { - pins = "gpio44", "gpio46","gpio47"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio45"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - serial_0_pins: serial0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - drive-open-drain; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - mux { - pins = "gpio34", "gpio35"; - function = "blsp_i2c1"; - drive-open-drain; - }; - }; - - sd_0_pins: sd_0_pinmux { - sd0 { - pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio29", "gpio30", "gpio31", "gpio32"; - function = "sdio"; - drive-strength = <10>; - bias-pull-up; - pull-up-res = <0>; - }; - sdclk { - pins = "gpio27"; - function = "sdio"; - drive-strength = <2>; - bias-pull-up; - pull-up-res = <0>; - }; - sdcmd { - pins = "gpio28"; - function = "sdio"; - drive-strength = <10>; - bias-pull-up; - pull-up-res = <0>; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-disable; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-disable; - }; - mux_3 { - pins = "gpio40"; - function = "gpio"; - bias-disable; - output-high; - }; - }; - - wifi1_1_pins: wifi2_pinmux { - mux { - pins = "gpio58"; - output-low; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - powered-while-suspended; - }; -}; - -&blsp1_i2c4 { - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - -#if 1 - led0_red: led@0 { - reg = <0>; - chan-name = "LED0_Red"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_FAULT; - }; - - led@1 { - reg = <1>; - chan-name = "LED0_Green"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_GREEN>; - }; - - led0_blue: led@2 { - reg = <2>; - chan-name = "LED0_Blue"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_POWER; - }; -#else - /* - * openwrt isn't ready to handle multi-intensity leds yet - * # echo 255 255 255 > /sys/class/leds/tricolor/multi_intensity - * # echo 255 > /sys/class/leds/tricolor/brightness - */ - multi-led@2 { - function = LED_FUNCTION_POWER; - reg = <2>; - color = <LED_COLOR_ID_RGB>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - chan-name = "tricolor"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_RED>; - }; - - led@1 { - reg = <1>; - chan-name = "tricolor"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_GREEN>; - }; - - led@2 { - reg = <2>; - chan-name = "tricolor"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - color = <LED_COLOR_ID_BLUE>; - }; - }; -#endif - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - }; -}; - -&blsp1_spi2 { - pinctrl-0 = <&spi_1_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - - /* - * This "spidev" was included in the manufacturer device tree. I - * suspect it's the (unused; and removed from later HW spins) Zigbee - * radio -- SiliconLabs EM3581 Zigbee? There's no driver or binding for - * this at the moment. - */ - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <24000000>; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -}; - -&prng { - status = "okay"; -}; - -&sdhci { - status = "okay"; - pinctrl-0 = <&sd_0_pins>; - pinctrl-names = "default"; - clock-frequency = <192000000>; - vqmmc-supply = <&vqmmc>; - non-removable; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - - label = "lan"; -}; - -&swport5 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&vqmmc { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "GO_GALE"; -}; - -&wifi1 { - status = "okay"; - pinctrl-0 = <&wifi1_1_pins>; - pinctrl-names = "default"; - qcom,ath10k-calibration-variant = "GO_GALE"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts deleted file mode 100644 index 2dc4544433..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ /dev/null @@ -1,373 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Compex WPJ419"; - compatible = "compex,wpj419", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - reserved-memory { - ranges; - rsvd1@87000000 { - /* Reserved for other subsystem */ - reg = <0x87000000 0x500000>; - no-map; - }; - wifi_dump@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - rsvd2@87B00000 { - /* Reserved for other subsystem */ - reg = <0x87B00000 0x500000>; - no-map; - }; - }; - - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; - }; - - soc { - pinctrl@1000000 { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - led_0_pins: led0_pinmux { - mux_1 { - pins = "gpio36"; - function = "led0"; - bias-pull-down; - }; - mux_2 { - pins = "gpio40"; - function = "led4"; - bias-pull-down; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "okay"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; - num-cs = <2>; - - flash0@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x040000 0x020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x060000 0x060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x0c0000 0x010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x0d0000 0x010000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x0e0000 0x010000>; - }; - - partition@f0000 { - label = "u-boot"; - reg = <0x0f0000 0x080000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - - nand@1 { - reg = <1>; - status = "okay"; - compatible = "spi-nand"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* The device has 128MB, but we can only address - * 64MB because of the bootloader's default settings. - * This is due to the old mt29f driver, - * which detected the deivce with only 64MB - */ - partition@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - }; - }; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - cryptobam: dma@8e04000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - - pcie0: pci@40000000 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts deleted file mode 100644 index 00b5897b7d..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts +++ /dev/null @@ -1,472 +0,0 @@ -// SPDX-License-Identifier: ISC -/* - * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2020 Yanase Yuki <dev@zpc.sakura.ne.jp> - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Buffalo WTR-M2133HP"; - compatible = "buffalo,wtr-m2133hp", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; - }; - - chosen { - /* - * U-Boot adds "ubi.mtd=rootfs root=mtd:ubi_rootfs" to - * kernel command line. But we use different partition names, - * so we have to set correct parameters. - */ - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; - }; - - aliases { - led-boot = &led_power_blue; - led-failsafe = &led_power_orange; - led-running = &led_power_white; - led-upgrade = &led_power_blue; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power_white: power_white { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_WHITE>; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - }; - - led_power_orange: power_orange { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; - }; - - led_power_blue: power_blue { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_BLUE>; - gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; - }; - - router_white { - label = "white:router"; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - }; - - router_orange { - label = "orange:router"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - internet_white { - label = "white:internet"; - gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; - }; - - internet_orange { - label = "orange:internet"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - wireless_white { - label = "white:wireless"; - gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; - }; - - wireless_orange { - label = "orange:wireless"; - gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - auto_mode { - label = "auto_mode"; - gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - linux,input-type = <EV_SW>; - }; - - router_mode { - label = "router_mode"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = <BTN_1>; - linux,input-type = <EV_SW>; - }; - - ap_mode { - label = "ap_mode"; - gpios = <&tlmm 11 GPIO_ACTIVE_LOW>; - linux,code = <BTN_2>; - linux,input-type = <EV_SW>; - }; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - wps { - label = "AOSS Button"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - usb_power { - line-name = "USB power"; - gpios = <34 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@0,0 { - compatible = "qcom,ath10k"; - reg = <0 0 0 0 0>; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_9000>, <&macaddr_orgdata_32>; - qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP"; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0000000 0x0100000>; - read-only; - }; - - partition@100000 { - label = "MIBIB"; - reg = <0x0100000 0x0100000>; - read-only; - }; - - partition@200000 { - label = "BOOTCONFIG"; - reg = <0x0200000 0x0100000>; - read-only; - }; - - partition@300000 { - label = "QSEE"; - reg = <0x0300000 0x0100000>; - read-only; - }; - - partition@400000 { - label = "QSEE_1"; - reg = <0x0400000 0x0100000>; - read-only; - }; - - partition@500000 { - label = "CDT"; - reg = <0x0500000 0x0080000>; - read-only; - }; - - partition@580000 { - label = "CDT_1"; - reg = <0x0580000 0x0080000>; - read-only; - }; - - partition@600000 { - label = "BOOTCONFIG1"; - reg = <0x0600000 0x0080000>; - read-only; - }; - - partition@680000 { - label = "APPSBLENV"; - reg = <0x0680000 0x0080000>; - }; - - partition@700000 { - label = "APPSBL"; - reg = <0x0700000 0x0200000>; - read-only; - }; - - partition@900000 { - label = "APPSBL_1"; - reg = <0x0900000 0x0200000>; - read-only; - }; - - partition@b00000 { - label = "ART"; - reg = <0x0b00000 0x0080000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - precal_art_9000: precal@9000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@b80000 { - label = "ART_1"; - reg = <0x0b80000 0x0080000>; - read-only; - }; - - orgdata: partition@c00000 { - label = "ORGDATA"; - reg = <0x0c00000 0x0080000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_orgdata_20: macaddr@20 { - reg = <0x20 0x6>; - }; - macaddr_orgdata_26: macaddr@26 { - reg = <0x26 0x6>; - }; - macaddr_orgdata_2c: macaddr@2c { - reg = <0x2c 0x6>; - }; - macaddr_orgdata_32: macaddr@32 { - reg = <0x32 0x6>; - }; - }; - }; - - partition@c80000 { - label = "ORGDATA_1"; - reg = <0x0c80000 0x0080000>; - read-only; - }; - - partition@d00000 { - label = "ubi"; - reg = <0x0d00000 0x2900000>; - }; - - partition@3600000 { - label = "rootfs_recover"; - reg = <0x3600000 0x2900000>; - read-only; - }; - - partition@5f00000 { - label = "user_property"; - reg = <0x5f00000 0x1a20000>; - read-only; - }; - }; - }; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_orgdata_26>; - qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP"; - ieee80211-freq-limit = <2400000 2483000>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_orgdata_2c>; - qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP"; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - label = "lan3"; -}; - -&swport3 { - status = "okay"; - label = "lan2"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; -}; - -&swport5 { - status = "okay"; -}; - -&gmac { - status = "okay"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_orgdata_20>; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts deleted file mode 100644 index 3d71593e86..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-x1pro.dts +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "qcom-ipq4019-x1pro.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Telco X1 Pro"; - compatible = "tel,x1pro","qcom,ipq4019"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - art: partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi deleted file mode 100644 index fe3650ca58..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-x1pro.dtsi +++ /dev/null @@ -1,218 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - compatible = "tel,x1pro","qcom,ipq4019"; - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - serial0 = &blsp1_uart1; - serial1 = &blsp1_uart2; - }; - - soc { - - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - watchdog@b017000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_status: status { - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pinmux { - mux { - function = "gpio"; - pins = "gpio68"; - bias-disabled; - output-low; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi deleted file mode 100644 index 141ea60442..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi +++ /dev/null @@ -1,326 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/* - * Device Tree Source for Linksys xx8300 (Dallas) - * - * Copyright (C) 2019, 2022 Jeff Kletsky - * Updated 2020 Hans Geiblinger - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - - // - // OEM U-Boot provides either - // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \ - // root=ubi0:ubifs rootwait rw - // or the same with ubi.mtd=13,2048 - // - -/ { - chosen { - bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - regulator-usb-vbus { - compatible = "regulator-fixed"; - regulator-name = "USB_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; -}; - - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - -}; - -&cryptobam { - status = "okay"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "mibib"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "qsee"; - reg = <0x200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "cdt"; - reg = <0x300000 0x80000>; - read-only; - }; - - partition@380000 { - label = "appsblenv"; - reg = <0x380000 0x80000>; - read-only; - }; - - partition@400000 { - label = "ART"; - reg = <0x400000 0x80000>; - read-only; - }; - - partition@480000 { - label = "appsbl"; - reg = <0x480000 0x200000>; - read-only; - }; - - partition@680000 { - label = "u_env"; - reg = <0x680000 0x80000>; - // writable -- U-Boot environment - }; - - partition@700000 { - label = "s_env"; - reg = <0x700000 0x40000>; - // writable -- Boot counter records - }; - - partition@740000 { - label = "devinfo"; - reg = <0x740000 0x40000>; - read-only; - }; - - partition@780000 { - label = "kernel"; - reg = <0x780000 0x5800000>; - }; - - partition@c80000 { - label = "rootfs"; - reg = <0xc80000 0x5300000>; - }; - - partition@5f80000 { - label = "alt_kernel"; - reg = <0x5f80000 0x5800000>; - }; - - partition@6480000 { - label = "alt_rootfs"; - reg = <0x6480000 0x5300000>; - }; - - partition@b780000 { - label = "sysdiag"; - reg = <0xb780000 0x100000>; - read-only; - }; - - partition@b880000 { - label = "syscfg"; - reg = <0xb880000 0x4680000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - serial_0_pins: serial0-pinmux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - // gpio61 controls led_usb - - pulldowns { - pins = "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", - "gpio64", "gpio65", "gpio66", - "gpio67", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; -}; - -&swport2 { - status = "okay"; -}; - -&swport3 { - status = "okay"; -}; - -&swport4 { - status = "okay"; -}; - -&swport5 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts deleted file mode 100644 index 4b61bbb5ac..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ /dev/null @@ -1,316 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de> - * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Compex WPJ428"; - compatible = "compex,wpj428"; - - chosen { - /* - * There's a chance that SPI reads fail even though the data itself is alright. - * The read result is cached and squashfs can't recover. - * Just panic when that happens and hope that next time it doesn't. - */ - bootargs-append = " rootflags=errors=panic"; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-upgrade = &status; - }; - - leds { - compatible = "gpio-leds"; - - status: rss4 { - label = "green:rss4"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "green:rss3"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - }; - - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "0:APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_e010: mac-address@e010 { - reg = <0xe010 0x6>; - }; - - macaddr_art_e018: mac-address@e018 { - reg = <0xe018 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - partition6@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x01e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "lan1"; - - nvmem-cells = <&macaddr_art_e018>; - nvmem-cell-names = "mac-address"; -}; - -&swport5 { - status = "okay"; - label = "lan2"; - - nvmem-cells = <&macaddr_art_e010>; - nvmem-cell-names = "mac-address"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts deleted file mode 100644 index 7e484db1b5..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts +++ /dev/null @@ -1,204 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Aruba AP-303"; - compatible = "aruba,ap-303"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - wifi_green { - label = "green:wifi"; - gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi_amber { - label = "amber:wifi"; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - led_system_red: system_red { - label = "red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_system_green: system_green { - label = "green:system"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 54 - out - active low to force HW reset - * 41 - out - active low to reset TPM - * 43 - out - active low to reset BLE radio - * 19 - in - active high when DC powered - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "ART"; - reg = <0xe0000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0xf0000>; - read-only; - }; - - partition@1e0000 { - label = "mfginfo"; - reg = <0x1e0000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mfginfo_1d: macaddr@1d { - compatible = "mac-base"; - reg = <0x1d 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1f0000 { - label = "apcd"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x180000>; - read-only; - }; - - partition@380000 { - label = "appsblenv"; - reg = <0x380000 0x10000>; - }; - - partition@390000 { - label = "pds"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - /* Called osss1 in smem */ - label = "u-boot-env-bak"; - reg = <0x3b0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts deleted file mode 100644 index 41b42e8f58..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ /dev/null @@ -1,479 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Aruba AP-303H"; - compatible = "aruba,ap-303h"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_amber; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@29 { - /* No Driver */ - compatible = "atmel,at97sc3203"; - reg = <0x29>; - read-only; - }; - - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - wifi_green { - label = "green:wifi"; - gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi_amber { - label = "amber:wifi"; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - pse { - label = "green:pse"; - gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; - }; - - led_system_red: system_red { - label = "red:system"; - gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; - }; - - led_system_green: system_green { - label = "green:system"; - gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; - }; - - led_system_amber: system_amber { - label = "amber:system"; - gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - /* Texas Instruments CC2540T BLE radio */ - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - active low to force HW reset - * 32 - out - active low to reset TPM - * 43 - out - active low to reset BLE radio - * 41 - out - pulse to set warm reset status - * 34 - out - active low to enable PSE port - * 22 - in - active low when 802.3at powered - * 29 - in - active high when DC powered - * 40 - in - active low when reset due to cold HW reset - * 30 - in - active low when USB overcurrent detected - * 35 - in - interrupt line for power monitor chip - * 31 - in - active low when PSE port active - */ - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - drive-strength = <4>; - bias-disable; - }; - }; - - serial_0_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial_1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - usb-power { - line-name = "USB-power"; - gpios = <23 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "appsblenv"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1e0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1f0000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@200000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mfginfo_1d: macaddr@1d { - reg = <0x1d 0x6>; - }; - - macaddr_mfginfo_45: macaddr@45 { - compatible = "mac-base"; - reg = <0x45 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - /* Called osss1 in smem */ - label = "u-boot-env-bak"; - reg = <0x3b0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3c0000 0x40000>; - read-only; - }; - }; - }; - - flash@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* 'aos0' in Aruba firmware */ - label = "aos0"; - reg = <0x0 0x2000000>; - read-only; - }; - - partition@2000000 { - /* 'aos1' in Aruba firmware */ - label = "ubi"; - reg = <0x2000000 0x2000000>; - }; - - partition@4000000 { - label = "aruba-ubifs"; - reg = <0x4000000 0x4000000>; - read-only; - }; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport2 { - status = "okay"; - - label = "lan1"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; -}; - -&swport4 { - status = "okay"; - - label = "lan3"; -}; - -&swport5 { - status = "okay"; - - label = "wan"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_45 0>; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_45 1>; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts deleted file mode 100644 index 3477dace72..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts +++ /dev/null @@ -1,227 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Aruba AP-365"; - compatible = "aruba,ap-365"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - led_system_red: system_red { - label = "red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - }; - - led_system_green: system_green { - label = "green:system"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - }; - - system_amber { - label = "amber:system"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <1000>; - always-running; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - pulse low to reset watchdog status flipflop - * 40 - out - active high to enable watchdog - * 41 - out - watchdog poke - * 42 - out - active low to reset BLE radio - * 43 - out - active low to reset TPM - * 47 - out - pulse low to reset warm reset status - * 54 - out - active low to force HW reset - * 18 - in - PHY interrupt line - * 45 - in - power monitor interrupt - * 48 - in - active low when cold reset - * 52 - in - active high when watchdog reset - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&i2c_0 { - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - - temperature-sensor@48 { - compatible = "adi,ad7416"; - reg = <0x48>; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x10000>; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1f0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@370000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_mfginfo_1d: macaddr@1d { - compatible = "mac-base"; - reg = <0x1d 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - label = "osss1"; - reg = <0x3b0000 0x50000>; - read-only; - }; - }; - }; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Aruba-AP-365"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Aruba-AP-365"; -}; - diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi deleted file mode 100644 index 4b3b682260..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi +++ /dev/null @@ -1,271 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy: ethernet-phy@5 { - reg = <0x5>; - }; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@29 { - /* No Driver */ - compatible = "atmel,at97sc3203"; - reg = <0x29>; - read-only; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - /* Texas Instruments CC2540T BLE radio */ - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c0"; - drive-strength = <4>; - bias-disable; - }; - }; - - serial_0_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial_1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* 'aos0' in Aruba firmware */ - label = "aos0"; - reg = <0x0 0x2000000>; - read-only; - }; - - partition@2000000 { - /* 'aos1' in Aruba firmware */ - label = "ubi"; - reg = <0x2000000 0x2000000>; - }; - - partition@4000000 { - label = "aruba-ubifs"; - reg = <0x4000000 0x4000000>; - read-only; - }; - }; - }; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; - - /delete-property/ psgmii-ethphy; -}; - -&swport5 { - status = "okay"; - - label = "lan"; - phy-handle = <ðphy>; - phy-mode = "rgmii-id"; -}; - -ðphy0 { - status = "disabled"; -}; - -ðphy1 { - status = "disabled"; -}; - -ðphy2 { - status = "disabled"; -}; - -ðphy3 { - status = "disabled"; -}; - -ðphy4 { - status = "disabled"; -}; - -&psgmiiphy { - status = "disabled"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_mfginfo_1d 0>; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_mfginfo_1d 1>; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts deleted file mode 100644 index 13ed26d5d6..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ /dev/null @@ -1,329 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "GL.iNet GL-B1300"; - compatible = "glinet,gl-b1300"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - label-mac-device = &swport4; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - mesh { - label = "green:mesh"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_gmac0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - - macaddr_gmac1: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - firmware@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport3 { - status = "okay"; - - label = "lan2"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0 2>; -}; - -&swport4 { - status = "okay"; - - label = "lan1"; - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac0 0>; -}; - -&swport5 { - status = "okay"; - - nvmem-cell-names = "mac-address"; - nvmem-cells = <&macaddr_gmac1>; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts deleted file mode 100644 index e7236824aa..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-gl-s1300.dts +++ /dev/null @@ -1,363 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "GL.iNet GL-S1300"; - compatible = "glinet,gl-s1300"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - mesh { - label = "green:mesh"; - gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; - }; - - wlan { - function = LED_FUNCTION_WLAN; - color = <LED_COLOR_ID_GREEN>; - gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - firmware@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0xe80000>; - }; - }; - }; -}; - -&blsp1_spi2 { - pinctrl-0 = <&spi_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - spidev1: spi@0 { - compatible = "silabs,si3210"; - reg = <0>; - spi-max-frequency = <24000000>; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", - "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - spi_1_pins: spi_1_pinmux { - mux { - pins = "gpio44", "gpio46", "gpio47"; - function = "blsp_spi1"; - bias-disable; - }; - host_int { - pins = "gpio42"; - function = "gpio"; - input; - }; - cs { - pins = "gpio45"; - function = "gpio"; - bias-pull-up; - }; - wake { - pins = "gpio40"; - function = "gpio"; - output-high; - }; - reset { - pins = "gpio49"; - function = "gpio"; - output-high; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <10>; - }; - - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - pinmux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_1000>; - qcom,ath10k-calibration-variant = "GL-S1300"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration"; - nvmem-cells = <&precal_art_5000>; - qcom,ath10k-calibration-variant = "GL-S1300"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi deleted file mode 100644 index 2b9f73eb24..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi +++ /dev/null @@ -1,444 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for Meraki "Insect" series - * - * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com> - * Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com> - * - * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> -#include <dt-bindings/leds/common.h> - -/ { - aliases { - led-boot = &status_green; - led-failsafe = &status_red; - led-running = &status_green; - led-upgrade = &power_orange; - }; - - /* Do we really need this defined? */ - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - /* It is a 56-bit counter that supplies the count to the ARM arch - timers and without upstream driver */ - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - bluetooth { - compatible = "ti,cc2650"; - enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_orange: power { - function = LED_FUNCTION_POWER; - color = <LED_COLOR_ID_ORANGE>; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - panic-indicator; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x50>; - read-only; /* This holds our MAC & Meraki board-data */ - #address-cells = <1>; - #size-cells = <1>; - - mac_address: mac-address@66 { - compatible = "mac-base"; - reg = <0x66 0x6>; - #nvmem-cell-cells = <1>; - }; - }; -}; - -&blsp1_i2c4 { - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - tricolor: led-controller@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - #address-cells = <1>; - #size-cells = <0>; - - /* RGB led */ - status_red: chan@0 { - chan-name = "red:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <0>; - color = <LED_COLOR_ID_RED>; - }; - - status_green: chan@1 { - chan-name = "green:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <1>; - color = <LED_COLOR_ID_GREEN>; - }; - - chan@2 { - chan-name = "blue:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <2>; - color = <LED_COLOR_ID_BLUE>; - }; - - chan@3 { - chan-name = "white:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <3>; - color = <LED_COLOR_ID_WHITE>; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "mibib"; - reg = <0x00100000 0x00100000>; - read-only; - }; - partition@200000 { - label = "bootconfig"; - reg = <0x00200000 0x00100000>; - read-only; - }; - partition@300000 { - label = "qsee"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "qsee_alt"; - reg = <0x00400000 0x00100000>; - read-only; - }; - partition@500000 { - label = "cdt"; - reg = <0x00500000 0x00080000>; - read-only; - }; - partition@580000 { - label = "cdt_alt"; - reg = <0x00580000 0x00080000>; - read-only; - }; - partition@600000 { - label = "ddrparams"; - reg = <0x00600000 0x00080000>; - read-only; - }; - partition@700000 { - label = "u-boot"; - reg = <0x00700000 0x00200000>; - read-only; - }; - partition@900000 { - label = "u-boot-backup"; - reg = <0x00900000 0x00200000>; - read-only; - }; - partition@b00000 { - label = "ART"; - reg = <0x00b00000 0x00080000>; - read-only; - }; - partition@c00000 { - label = "ubi"; - reg = <0x00c00000 0x07000000>; - /* - * Do not try to allocate the remaining - * 4 MiB to this ubi partition. It will - * confuse the u-boot and it might not - * find the kernel partition anymore. - */ - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - nvmem-cells = <&mac_address 1>; - nvmem-cell-names = "mac-address"; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * GPIO43 should be 0/1 whenever the unit is - * powered through PoE or AC-Adapter. - * That said, playing with this seems to - * reset the AP. - */ - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - /* We use the i2c-0 pins for serial_1 */ - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - pinmux { - function = "blsp_i2c1"; - pins = "gpio34", "gpio35"; - }; - pinconf { - pins = "gpio34", "gpio35"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - /* - * There are 18 pins. 15 pins are common between LCD and NAND. - * The QPIC controller arbitrates between LCD and NAND. Of the - * remaining 4, 2 are for NAND and 2 are for LCD exclusively. - * - * The meraki source hints that the bluetooth module claims - * pin 52 as well. But sadly, there's no data whenever this - * is a NAND or LCD exclusive pin or not. - */ - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; - nvmem-cells = <&mac_address 2>; - nvmem-cell-names = "mac-address"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; - nvmem-cells = <&mac_address 3>; - nvmem-cell-names = "mac-address"; -}; - -&gmac { - status = "okay"; - nvmem-cells = <&mac_address 0>; - nvmem-cell-names = "mac-address"; -}; - -&switch { - status = "okay"; - - /delete-property/ psgmii-ethphy; -}; - -&swport5 { - status = "okay"; - - label = "lan"; - phy-handle = <ðphy1>; - phy-mode = "rgmii-rxid"; -}; - -ðphy0 { - status = "disabled"; -}; - -ðphy2 { - status = "disabled"; -}; - -ðphy3 { - status = "disabled"; -}; - -ðphy4 { - status = "disabled"; -}; - -&psgmiiphy { - status = "disabled"; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-mr33.dts deleted file mode 100644 index 8c8b1b3150..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Device Tree Source for Meraki MR33 (Stinkbug) - -#include "qcom-ipq4029-insect-common.dtsi" - -/ { - model = "Meraki MR33 Access Point"; - compatible = "meraki,mr33"; -}; - -&tricolor { - enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-mr74.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-mr74.dts deleted file mode 100644 index 904f724652..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-mr74.dts +++ /dev/null @@ -1,13 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -// Device Tree Source for Meraki MR74 (Ladybug) - -#include "qcom-ipq4029-insect-common.dtsi" - -/ { - model = "Meraki MR74 Access Point"; - compatible = "meraki,mr74"; -}; - -&tricolor { - enable-gpio = <&tlmm 14 GPIO_ACTIVE_LOW>; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts deleted file mode 100644 index 8794d839a8..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts +++ /dev/null @@ -1,262 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Extreme Networks WS-AP3915i"; - compatible = "extreme-networks,ws-ap3915i"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_amber; - led-running = &led_system_green; - led-upgrade = &led_system_amber; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_system_green: system_green { - label = "green:system"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - - led_system_amber: system_amber { - label = "amber:system"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - led_wlan24_green: wlan24_green { - label = "green:wlan24"; - gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - led_wlan24_amber: wlan24_amber { - label = "amber:wlan24"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - led_wlan5_green: wlan5_green { - label = "green:wlan5"; - gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - led_wlan5_amber: wlan5_amber { - label = "amber:wlan5"; - gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; - }; - - iot { - label = "blue:iot"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART >; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport5 { - status = "okay"; - - label = "lan"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - serial_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* Layout for 0x0 - 0xe0000 unknown */ - - partition@e0000 { - label = "CFG1"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "BootBAK"; - reg = <0xf0000 0x70000>; - read-only; - }; - - partition@160000 { - label = "WINGCFG1"; - reg = <0x160000 0x10000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - partition@180000 { - label = "BootPRI"; - reg = <0x180000 0x70000>; - read-only; - }; - - partition@1f0000 { - label = "WINGCFG2"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "FS"; - reg = <0x200000 0x80000>; - read-only; - }; - - partition@280000 { - label = "firmware"; - reg = <0x280000 0x1d60000>; - }; - - partition@1fe0000 { - label = "CFG2"; - reg = <0x1fe0000 0x10000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ws-ap391x.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ws-ap391x.dts deleted file mode 100644 index 04b55b1abf..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4029-ws-ap391x.dts +++ /dev/null @@ -1,344 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Extreme Networks WS-AP391x"; - compatible = "extreme-networks,ws-ap391x"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - soc { - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - }; - - leds { - compatible = "gpio-leds"; - - led_system_green: system_green { - label = "system:green"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - - /* - * system:amber ==> AP3917 - * system:red ==> AP3916 - * */ - led_system_red: system_red { - label = "system:red_or_system:amber"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - led_wlan24_green: wlan24_green { - label = "wlan24:green"; - gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - /* - * wlan24:amber ==> AP3915/AP3917 - * pse:green ==> AP3912 - * */ - led_wlan24_amber: wlan24_amber { - label = "wlan24:amber_or_pse:green"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - led_wlan5_green: wlan5_green { - label = "wlan5:green"; - gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - /* iot:blue ==> AP3917 */ - led_iot_green: iot_green { - label = "iot:green_or_iot:blue"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - }; - - /* eth:green ==> only AP3912/AP3916 */ - led_eth_green: eth_green { - label = "eth:green"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - }; - - /* - * eth:amber ==> only AP3912/AP3916 - * usb_enable ==> only AP3915e - */ - led_eth_amber: eth_amber { - label = "eth:amber_or_usb_enable"; - gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; - }; - - /* - * wlan5:amber ==> AP3915/AP3917 - * cam:green ==> only AP3916 - */ - led_wlan5_amber: wlan5_amber { - label = "wlan5:amber_or_cam:green"; - gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; - }; - - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART >; - }; - }; -}; - -&prng { - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; -}; - -&crypto { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport1 { - status = "okay"; - label = "sw-eth1"; -}; - -&swport2 { - status = "okay"; - label = "sw-eth2"; -}; - -&swport3 { - status = "okay"; - label = "sw-eth3"; -}; - -/* "GE2" on AP3917/AP3916/WiNG-AP7662 */ -&swport4 { - status = "okay"; - label = "sw-eth4"; -}; - -/* - * "GE1" on AP3917/AP3916/AP3915/AP7662 - * "LAN1" on EXTR-AP3912 - */ -&swport5 { - status = "okay"; - label = "sw-eth5"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - serial_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* Layout for 0x0 - 0xe0000 unknown */ - - partition@e0000 { - label = "CFG1"; - compatible = "u-boot,env-redundant-bool"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "BootBAK"; - reg = <0xf0000 0x70000>; - read-only; - }; - - partition@160000 { - label = "WINGCFG1"; - reg = <0x160000 0x10000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - partition@180000 { - label = "BootPRI"; - reg = <0x180000 0x70000>; - read-only; - }; - - partition@1f0000 { - label = "WINGCFG2"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "FS"; - reg = <0x200000 0x80000>; - read-only; - }; - - partition@280000 { - label = "firmware"; - reg = <0x280000 0xeb0000>; - }; - - partition@1130000 { - label = "firmware2"; - reg = <0x1130000 0xeb0000>; - }; - - partition@1fe0000 { - label = "CFG2"; - compatible = "u-boot,env-redundant-bool"; - reg = <0x1fe0000 0x10000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq40x9-dr40x9.dts b/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq40x9-dr40x9.dts deleted file mode 100644 index 271a972092..0000000000 --- a/target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq40x9-dr40x9.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "Wallystech DR40X9"; - compatible = "wallys,dr40x9"; - - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1"; - }; - - soc { - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - tcsr@194b000 { - status = "okay"; - - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; - - leds { - compatible = "gpio-leds"; - - wlan2g { - label = "dr4029:green:wlan2g"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "dr4029:green:wlan5g"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wlan2g-strength { - label = "dr4029:green:wlan2g-strength"; - gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; - }; - - wlan5g-strength { - label = "dr4029:green:wlan5g-strength"; - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial0_pins: serial0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", "gpio68", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <10>; - }; - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - pinmux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@e0000 { - label = "0:APPSBLENV"; /* uboot env */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@f0000 { - label = "0:APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: mac-address@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: mac-address@6 { - reg = <0x6 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - macaddr_art_1006: mac-address@1006 { - reg = <0x1006 0x6>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - - macaddr_art_5006: mac-address@5006 { - reg = <0x5006 0x6>; - }; - }; - }; - - partition8@180000 { - label = "0:CONFIG"; - reg = <0x00180000 0x00010000>; - read-only; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x04000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial0_pins>; - pinctrl-names = "default"; -}; - -&blsp1_uart2 { - status = "okay"; - pinctrl-0 = <&serial1_pins>; - pinctrl-names = "default"; -}; - -&crypto { - status = "okay"; -}; - -&cryptobam { - num-channels = <4>; - qcom,num-ees = <2>; - status = "okay"; -}; - -&mdio { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>; - - /* Unpolulated slot */ - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&gmac { - status = "okay"; -}; - -&switch { - status = "okay"; -}; - -&swport4 { - status = "okay"; - label = "wan"; - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; -}; - -&swport5 { - status = "okay"; - label = "lan"; - nvmem-cells = <&macaddr_art_6>; - nvmem-cell-names = "mac-address"; -}; - -&wifi0 { - status = "okay"; - nvmem-cells = <&precal_art_1000>, <&macaddr_art_1006>; - nvmem-cell-names = "pre-calibration", "mac-address"; - qcom,ath10k-calibration-variant = "Wallys-DR40X9"; -}; - -&wifi1 { - status = "okay"; - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_art_5006>; - qcom,ath10k-calibration-variant = "Wallys-DR40X9"; -}; - -&usb2 { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&prng { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - diff --git a/target/linux/ipq40xx/patches-6.1/001-v6.6-dt-bindings-clock-qcom-ipq4019-add-missing-networkin.patch b/target/linux/ipq40xx/patches-6.1/001-v6.6-dt-bindings-clock-qcom-ipq4019-add-missing-networkin.patch deleted file mode 100644 index 87feaf79f8..0000000000 --- a/target/linux/ipq40xx/patches-6.1/001-v6.6-dt-bindings-clock-qcom-ipq4019-add-missing-networkin.patch +++ /dev/null @@ -1,30 +0,0 @@ -From be59072c6eeb7535bf9a339fb9d5a8bfae17ac22 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Mon, 14 Aug 2023 12:40:23 +0200 -Subject: [PATCH] dt-bindings: clock: qcom: ipq4019: add missing networking - resets - -Add bindings for the missing networking resets found in IPQ4019 GCC. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> -Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> -Link: https://lore.kernel.org/r/20230814104119.96858-1-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson <andersson@kernel.org> ---- - include/dt-bindings/clock/qcom,gcc-ipq4019.h | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/include/dt-bindings/clock/qcom,gcc-ipq4019.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h -@@ -165,5 +165,11 @@ - #define GCC_QDSS_BCR 69 - #define GCC_MPM_BCR 70 - #define GCC_SPDM_BCR 71 -+#define ESS_MAC1_ARES 72 -+#define ESS_MAC2_ARES 73 -+#define ESS_MAC3_ARES 74 -+#define ESS_MAC4_ARES 75 -+#define ESS_MAC5_ARES 76 -+#define ESS_PSGMII_ARES 77 - - #endif diff --git a/target/linux/ipq40xx/patches-6.1/002-v6.6-clk-qcom-gcc-ipq4019-add-missing-networking-resets.patch b/target/linux/ipq40xx/patches-6.1/002-v6.6-clk-qcom-gcc-ipq4019-add-missing-networking-resets.patch deleted file mode 100644 index 70b278c803..0000000000 --- a/target/linux/ipq40xx/patches-6.1/002-v6.6-clk-qcom-gcc-ipq4019-add-missing-networking-resets.patch +++ /dev/null @@ -1,30 +0,0 @@ -From 20014461691efc9e274c3870357152db7f091820 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Mon, 14 Aug 2023 12:40:24 +0200 -Subject: [PATCH] clk: qcom: gcc-ipq4019: add missing networking resets - -IPQ4019 has more networking related resets that will be required for future -wired networking support, so lets add them. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> -Link: https://lore.kernel.org/r/20230814104119.96858-2-robert.marko@sartura.hr -Signed-off-by: Bjorn Andersson <andersson@kernel.org> ---- - drivers/clk/qcom/gcc-ipq4019.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1707,6 +1707,12 @@ static const struct qcom_reset_map gcc_i - [GCC_TCSR_BCR] = {0x22000, 0}, - [GCC_MPM_BCR] = {0x24000, 0}, - [GCC_SPDM_BCR] = {0x25000, 0}, -+ [ESS_MAC1_ARES] = {0x1200C, 0}, -+ [ESS_MAC2_ARES] = {0x1200C, 1}, -+ [ESS_MAC3_ARES] = {0x1200C, 2}, -+ [ESS_MAC4_ARES] = {0x1200C, 3}, -+ [ESS_MAC5_ARES] = {0x1200C, 4}, -+ [ESS_PSGMII_ARES] = {0x1200C, 5}, - }; - - static const struct regmap_config gcc_ipq4019_regmap_config = { diff --git a/target/linux/ipq40xx/patches-6.1/004-v6.7-firmware-qcom_scm-disable-SDI-if-required.patch b/target/linux/ipq40xx/patches-6.1/004-v6.7-firmware-qcom_scm-disable-SDI-if-required.patch deleted file mode 100644 index ae7e9f97c0..0000000000 --- a/target/linux/ipq40xx/patches-6.1/004-v6.7-firmware-qcom_scm-disable-SDI-if-required.patch +++ /dev/null @@ -1,83 +0,0 @@ -From ff4aa3bc98258a240b9bbab53fd8d2fb8184c485 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Wed, 16 Aug 2023 18:45:39 +0200 -Subject: [PATCH] firmware: qcom_scm: disable SDI if required - -IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that -means that WDT being asserted or just trying to reboot will hang the board -in the debug mode and only pulling the power and repowering will help. -Some IPQ4019 boards like Google WiFI have it enabled as well. - -Luckily, SDI can be disabled via an SCM call. - -So, lets use the boolean DT property to identify boards that have SDI -enabled by default and use the SCM call to disable SDI during SCM probe. -It is important to disable it as soon as possible as we might have a WDT -assertion at any time which would then leave the board in debug mode, -thus disabling it during SCM removal is not enough. - -Signed-off-by: Robert Marko <robimarko@gmail.com> -Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> -Link: https://lore.kernel.org/r/20230816164641.3371878-2-robimarko@gmail.com -Signed-off-by: Bjorn Andersson <andersson@kernel.org> ---- - drivers/firmware/qcom_scm.c | 30 ++++++++++++++++++++++++++++++ - drivers/firmware/qcom_scm.h | 1 + - 2 files changed, 31 insertions(+) - ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -407,6 +407,29 @@ int qcom_scm_set_remote_state(u32 state, - } - EXPORT_SYMBOL(qcom_scm_set_remote_state); - -+static int qcom_scm_disable_sdi(void) -+{ -+ int ret; -+ struct qcom_scm_desc desc = { -+ .svc = QCOM_SCM_SVC_BOOT, -+ .cmd = QCOM_SCM_BOOT_SDI_CONFIG, -+ .args[0] = 1, /* Disable watchdog debug */ -+ .args[1] = 0, /* Disable SDI */ -+ .arginfo = QCOM_SCM_ARGS(2), -+ .owner = ARM_SMCCC_OWNER_SIP, -+ }; -+ struct qcom_scm_res res; -+ -+ ret = qcom_scm_clk_enable(); -+ if (ret) -+ return ret; -+ ret = qcom_scm_call(__scm->dev, &desc, &res); -+ -+ qcom_scm_clk_disable(); -+ -+ return ret ? : res.result[0]; -+} -+ - static int __qcom_scm_set_dload_mode(struct device *dev, bool enable) - { - struct qcom_scm_desc desc = { -@@ -1411,6 +1434,13 @@ static int qcom_scm_probe(struct platfor - - __get_convention(); - -+ -+ /* -+ * Disable SDI if indicated by DT that it is enabled by default. -+ */ -+ if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled")) -+ qcom_scm_disable_sdi(); -+ - /* - * If requested enable "download mode", from this point on warmboot - * will cause the boot stages to enter download mode, unless ---- a/drivers/firmware/qcom_scm.h -+++ b/drivers/firmware/qcom_scm.h -@@ -77,6 +77,7 @@ extern int scm_legacy_call(struct device - #define QCOM_SCM_SVC_BOOT 0x01 - #define QCOM_SCM_BOOT_SET_ADDR 0x01 - #define QCOM_SCM_BOOT_TERMINATE_PC 0x02 -+#define QCOM_SCM_BOOT_SDI_CONFIG 0x09 - #define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10 - #define QCOM_SCM_BOOT_SET_ADDR_MC 0x11 - #define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a diff --git a/target/linux/ipq40xx/patches-6.1/100-ARM-dts-qcom-ipq4019-add-label-to-SCM.patch b/target/linux/ipq40xx/patches-6.1/100-ARM-dts-qcom-ipq4019-add-label-to-SCM.patch deleted file mode 100644 index 8b9352e6f1..0000000000 --- a/target/linux/ipq40xx/patches-6.1/100-ARM-dts-qcom-ipq4019-add-label-to-SCM.patch +++ /dev/null @@ -1,24 +0,0 @@ -From ea9fba16d972becc84cd2a82d25030975dc609a5 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Sat, 30 Sep 2023 13:09:27 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add label to SCM - -Some IPQ4019 boards require SDI to be disabled by adding a property to the -SCM node, so lets make that easy by adding a label to the SCM node. - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -155,7 +155,7 @@ - }; - - firmware { -- scm { -+ scm: scm { - compatible = "qcom,scm-ipq4019", "qcom,scm"; - }; - }; diff --git a/target/linux/ipq40xx/patches-6.1/104-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-6.1/104-clk-fix-apss-cpu-overclocking.patch deleted file mode 100644 index 2de03f7ae0..0000000000 --- a/target/linux/ipq40xx/patches-6.1/104-clk-fix-apss-cpu-overclocking.patch +++ /dev/null @@ -1,115 +0,0 @@ -From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter <chunkeey@googlemail.com> -Date: Sun, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH 2/2] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> -Signed-off-by: John Crispin <john@phrozen.org> ---- - drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- - 1 file changed, 31 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1277,7 +1300,7 @@ static int clk_cpu_div_set_rate(struct c - const struct freq_tbl *f; - u32 mask; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1304,6 +1327,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1324,7 +1348,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-6.1/301-arm-compressed-add-appended-DTB-section.patch b/target/linux/ipq40xx/patches-6.1/301-arm-compressed-add-appended-DTB-section.patch deleted file mode 100644 index 0448574e7e..0000000000 --- a/target/linux/ipq40xx/patches-6.1/301-arm-compressed-add-appended-DTB-section.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0843a61d6913bdac8889eb048ed89f7903059787 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Fri, 30 Oct 2020 13:36:31 +0100 -Subject: [PATCH] arm: compressed: add appended DTB section - -This adds a appended_dtb section to the ARM decompressor -linker script. - -This allows using the existing ARM zImage appended DTB support for -appending a DTB to the raw ELF kernel. - -Its size is set to 1MB max to match the zImage appended DTB size limit. - -To use it to pass the DTB to the kernel, objcopy is used: - -objcopy --set-section-flags=.appended_dtb=alloc,contents \ - --update-section=.appended_dtb=<target>.dtb vmlinux - -This is based off the following patch: -https://github.com/openwrt/openwrt/commit/c063e27e02a9dcac0e7f5877fb154e58fa3e1a69 - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - arch/arm/boot/compressed/vmlinux.lds.S | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/compressed/vmlinux.lds.S -+++ b/arch/arm/boot/compressed/vmlinux.lds.S -@@ -103,6 +103,13 @@ SECTIONS - - _edata = .; - -+ .appended_dtb : { -+ /* leave space for appended DTB */ -+ . += 0x100000; -+ } -+ -+ _edata_dtb = .; -+ - /* - * The image_end section appears after any additional loadable sections - * that the linker may decide to insert in the binary image. Having -@@ -140,4 +147,4 @@ SECTIONS - - ARM_ASSERTS - } --ASSERT(_edata_real == _edata, "error: zImage file size is incorrect"); -+ASSERT(_edata_real == _edata_dtb, "error: zImage file size is incorrect"); diff --git a/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch deleted file mode 100644 index 4939c56470..0000000000 --- a/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 11d6a6128a5a07c429941afc202b6e62a19771be Mon Sep 17 00:00:00 2001 -From: John Thomson <git@johnthomson.fastmail.com.au> -Date: Fri, 23 Oct 2020 19:42:36 +1000 -Subject: [PATCH 2/2] arm: compressed: set ipq40xx watchdog to allow boot - -For IPQ40XX systems where the SoC watchdog is activated before linux, -the watchdog timer may be too small for linux to finish uncompress, -boot, and watchdog management start. -If the watchdog is enabled, set the timeout for it to 30 seconds. -The functionality and offsets were copied from: -drivers/watchdog/qcom-wdt.c qcom_wdt_set_timeout & qcom_wdt_start -The watchdog memory address was taken from: -arch/arm/boot/dts/qcom-ipq4019.dtsi - -This was required on Mikrotik IPQ40XX consumer hardware using Mikrotik's -RouterBoot bootloader. - -Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> ---- - arch/arm/boot/compressed/head.S | 35 +++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - ---- a/arch/arm/boot/compressed/head.S -+++ b/arch/arm/boot/compressed/head.S -@@ -620,6 +620,41 @@ not_relocated: mov r0, #0 - bic r4, r4, #1 - blne cache_on - -+/* Set the Qualcom IPQ40xx watchdog timeout to 30 seconds -+ * if it is enabled, so that there is time for kernel -+ * to decompress, boot, and take over the watchdog. -+ * data and functionality from drivers/watchdog/qcom-wdt.c -+ * address from arch/arm/boot/dts/qcom-ipq4019.dtsi -+ */ -+#ifdef CONFIG_ARCH_IPQ40XX -+watchdog_set: -+ /* offsets: -+ * 0x04 reset (=1 resets countdown) -+ * 0x08 enable (=0 disables) -+ * 0x0c status (=1 when SoC was reset by watchdog) -+ * 0x10 bark (=timeout warning in ticks) -+ * 0x14 bite (=timeout reset in ticks) -+ * clock rate is 1<<15 hertz -+ */ -+ .equ watchdog, 0x0b017000 @Store watchdog base address -+ movw r0, #:lower16:watchdog -+ movt r0, #:upper16:watchdog -+ ldr r1, [r0, #0x08] @Get enabled? -+ cmp r1, #1 @If not enabled, do not change -+ bne watchdog_finished -+ mov r1, #0 -+ str r1, [r0, #0x08] @Disable the watchdog -+ mov r1, #1 -+ str r1, [r0, #0x04] @Pet the watchdog -+ mov r1, #30 @30 seconds timeout -+ lsl r1, r1, #15 @converted to ticks -+ str r1, [r0, #0x10] @Set the bark timeout -+ str r1, [r0, #0x14] @Set the bite timeout -+ mov r1, #1 -+ str r1, [r0, #0x08] @Enable the watchdog -+watchdog_finished: -+#endif /* CONFIG_ARCH_IPQ40XX */ -+ - /* - * The C runtime environment should now be setup sufficiently. - * Set up some pointers, and start decompressing. diff --git a/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch deleted file mode 100644 index bf36164aed..0000000000 --- a/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch +++ /dev/null @@ -1,24 +0,0 @@ -From f63ea127643a605da97090ce585fdd7c2d17fa42 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Mon, 14 Dec 2020 13:35:35 +0100 -Subject: [PATCH] mmc: sdhci-msm: use sdhci_set_clock - -When using sdhci_msm_set_clock clock setting will fail, so lets -use the generic sdhci_set_clock. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - drivers/mmc/host/sdhci-msm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mmc/host/sdhci-msm.c -+++ b/drivers/mmc/host/sdhci-msm.c -@@ -2451,7 +2451,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat - - static const struct sdhci_ops sdhci_msm_ops = { - .reset = sdhci_msm_reset, -- .set_clock = sdhci_msm_set_clock, -+ .set_clock = sdhci_set_clock, - .get_min_clock = sdhci_msm_get_min_clock, - .get_max_clock = sdhci_msm_get_max_clock, - .set_bus_width = sdhci_set_bus_width, diff --git a/target/linux/ipq40xx/patches-6.1/401-mmc-sdhci-msm-comment-unused-sdhci_msm_set_clock.patch b/target/linux/ipq40xx/patches-6.1/401-mmc-sdhci-msm-comment-unused-sdhci_msm_set_clock.patch deleted file mode 100644 index b297600171..0000000000 --- a/target/linux/ipq40xx/patches-6.1/401-mmc-sdhci-msm-comment-unused-sdhci_msm_set_clock.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 28edd829133766eb3cefaf2e49d3ee701968061b Mon Sep 17 00:00:00 2001 -From: Christian Marangi <ansuelsmth@gmail.com> -Date: Tue, 9 May 2023 01:57:17 +0200 -Subject: [PATCH] mmc: sdhci-msm: comment unused sdhci_msm_set_clock - -comment unused sdhci_msm_set_clock and __sdhci_msm_set_clock as due to some -current problem, we are forced to use sdhci_set_clock. - -Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> ---- - drivers/mmc/host/sdhci-msm.c | 86 ++++++++++++++++++------------------ - 1 file changed, 43 insertions(+), 43 deletions(-) - ---- a/drivers/mmc/host/sdhci-msm.c -+++ b/drivers/mmc/host/sdhci-msm.c -@@ -1751,49 +1751,49 @@ static unsigned int sdhci_msm_get_min_cl - return SDHCI_MSM_MIN_CLOCK; - } - --/* -- * __sdhci_msm_set_clock - sdhci_msm clock control. -- * -- * Description: -- * MSM controller does not use internal divider and -- * instead directly control the GCC clock as per -- * HW recommendation. -- **/ --static void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) --{ -- u16 clk; -- -- sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); -- -- if (clock == 0) -- return; -- -- /* -- * MSM controller do not use clock divider. -- * Thus read SDHCI_CLOCK_CONTROL and only enable -- * clock with no divider value programmed. -- */ -- clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); -- sdhci_enable_clk(host, clk); --} -- --/* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */ --static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) --{ -- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); -- struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); -- -- if (!clock) { -- host->mmc->actual_clock = msm_host->clk_rate = 0; -- goto out; -- } -- -- sdhci_msm_hc_select_mode(host); -- -- msm_set_clock_rate_for_bus_mode(host, clock); --out: -- __sdhci_msm_set_clock(host, clock); --} -+// /* -+// * __sdhci_msm_set_clock - sdhci_msm clock control. -+// * -+// * Description: -+// * MSM controller does not use internal divider and -+// * instead directly control the GCC clock as per -+// * HW recommendation. -+// **/ -+// static void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) -+// { -+// u16 clk; -+ -+// sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); -+ -+// if (clock == 0) -+// return; -+ -+// /* -+// * MSM controller do not use clock divider. -+// * Thus read SDHCI_CLOCK_CONTROL and only enable -+// * clock with no divider value programmed. -+// */ -+// clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); -+// sdhci_enable_clk(host, clk); -+// } -+ -+// /* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */ -+// static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) -+// { -+// struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); -+// struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); -+ -+// if (!clock) { -+// host->mmc->actual_clock = msm_host->clk_rate = 0; -+// goto out; -+// } -+ -+// sdhci_msm_hc_select_mode(host); -+ -+// msm_set_clock_rate_for_bus_mode(host, clock); -+// out: -+// __sdhci_msm_set_clock(host, clock); -+// } - - /*****************************************************************************\ - * * diff --git a/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch b/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch deleted file mode 100644 index cb06ff353c..0000000000 --- a/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch +++ /dev/null @@ -1,138 +0,0 @@ -From aaa675f07e781e248fcf169ce9a917b48bc2cc9b Mon Sep 17 00:00:00 2001 -From: Brian Norris <computersforpeace@gmail.com> -Date: Fri, 28 Jul 2023 12:06:23 +0200 -Subject: [PATCH 3/3] firmware: qcom: scm: fix SCM cold boot address - -This effectively reverts upstream Linux commit 13e77747800e ("firmware: -qcom: scm: Use atomic SCM for cold boot"), because Google WiFi boot -firmwares don't support the atomic variant. - -This fixes SMP support for Google WiFi. - -Signed-off-by: Brian Norris <computersforpeace@gmail.com> ---- - drivers/firmware/qcom_scm-legacy.c | 62 +++++++++++++++++++++++++----- - drivers/firmware/qcom_scm.c | 11 ++++++ - 2 files changed, 63 insertions(+), 10 deletions(-) - ---- a/drivers/firmware/qcom_scm-legacy.c -+++ b/drivers/firmware/qcom_scm-legacy.c -@@ -13,6 +13,9 @@ - #include <linux/arm-smccc.h> - #include <linux/dma-mapping.h> - -+#include <asm/cacheflush.h> -+#include <asm/outercache.h> -+ - #include "qcom_scm.h" - - static DEFINE_MUTEX(qcom_scm_lock); -@@ -117,6 +120,25 @@ static void __scm_legacy_do(const struct - } while (res->a0 == QCOM_SCM_INTERRUPTED); - } - -+static void qcom_scm_inv_range(unsigned long start, unsigned long end) -+{ -+ u32 cacheline_size, ctr; -+ -+ asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); -+ cacheline_size = 4 << ((ctr >> 16) & 0xf); -+ -+ start = round_down(start, cacheline_size); -+ end = round_up(end, cacheline_size); -+ outer_inv_range(start, end); -+ while (start < end) { -+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) -+ : "memory"); -+ start += cacheline_size; -+ } -+ dsb(); -+ isb(); -+} -+ - /** - * scm_legacy_call() - Sends a command to the SCM and waits for the command to - * finish processing. -@@ -163,10 +185,16 @@ int scm_legacy_call(struct device *dev, - - rsp = scm_legacy_command_to_response(cmd); - -- cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE); -- if (dma_mapping_error(dev, cmd_phys)) { -- kfree(cmd); -- return -ENOMEM; -+ if (dev) { -+ cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(dev, cmd_phys)) { -+ kfree(cmd); -+ return -ENOMEM; -+ } -+ } else { -+ cmd_phys = virt_to_phys(cmd); -+ __cpuc_flush_dcache_area(cmd, alloc_len); -+ outer_flush_range(cmd_phys, cmd_phys + alloc_len); - } - - smc.args[0] = 1; -@@ -182,13 +210,26 @@ int scm_legacy_call(struct device *dev, - goto out; - - do { -- dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len, -- sizeof(*rsp), DMA_FROM_DEVICE); -+ if (dev) { -+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + -+ cmd_len, sizeof(*rsp), -+ DMA_FROM_DEVICE); -+ } else { -+ unsigned long start = (uintptr_t)cmd + sizeof(*cmd) + -+ cmd_len; -+ qcom_scm_inv_range(start, start + sizeof(*rsp)); -+ } - } while (!rsp->is_complete); - -- dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len + -- le32_to_cpu(rsp->buf_offset), -- resp_len, DMA_FROM_DEVICE); -+ if (dev) { -+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len + -+ le32_to_cpu(rsp->buf_offset), -+ resp_len, DMA_FROM_DEVICE); -+ } else { -+ unsigned long start = (uintptr_t)cmd + sizeof(*cmd) + cmd_len + -+ le32_to_cpu(rsp->buf_offset); -+ qcom_scm_inv_range(start, start + resp_len); -+ } - - if (res) { - res_buf = scm_legacy_get_response_buffer(rsp); -@@ -196,7 +237,8 @@ int scm_legacy_call(struct device *dev, - res->result[i] = le32_to_cpu(res_buf[i]); - } - out: -- dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE); -+ if (dev) -+ dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE); - kfree(cmd); - return ret; - } ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -312,6 +312,17 @@ static int qcom_scm_set_boot_addr(void * - desc.args[0] = flags; - desc.args[1] = virt_to_phys(entry); - -+ /* -+ * Factory firmware doesn't support the atomic variant. Non-atomic SCMs -+ * require ugly DMA invalidation support that was dropped upstream a -+ * while ago. For more info, see: -+ * -+ * [RFC] qcom_scm: IPQ4019 firmware does not support atomic API? -+ * https://lore.kernel.org/linux-arm-msm/20200913201608.GA3162100@bDebian/ -+ */ -+ if (of_machine_is_compatible("google,wifi")) -+ return qcom_scm_call(__scm ? __scm->dev : NULL, &desc, NULL); -+ - return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); - } - diff --git a/target/linux/ipq40xx/patches-6.1/444-mtd-nand-rawnand-add-support-for-Toshiba-TC58NVG0S3H.patch b/target/linux/ipq40xx/patches-6.1/444-mtd-nand-rawnand-add-support-for-Toshiba-TC58NVG0S3H.patch deleted file mode 100644 index 91919b2894..0000000000 --- a/target/linux/ipq40xx/patches-6.1/444-mtd-nand-rawnand-add-support-for-Toshiba-TC58NVG0S3H.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 35ca7e3e6ccd120d694a3425f37fc6374ad2e11e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Andreas=20B=C3=B6hler?= <dev@aboehler.at> -Date: Wed, 20 Apr 2022 12:08:38 +0200 -Subject: [PATCH] mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 - NAND flash -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Toshiba TC58NVG0S3HTA00 is detected with 64 byte OOB while the flash -has 128 bytes OOB. This adds a static NAND ID entry to correct this. - -Tested on FRITZ!Box 7530 flashed with OpenWrt. - -Signed-off-by: Andreas Böhler <dev@aboehler.at> -(changed id_len to 8, added comment about possible counterfeits) ---- ---- a/drivers/mtd/nand/raw/nand_ids.c -+++ b/drivers/mtd/nand/raw/nand_ids.c -@@ -29,6 +29,9 @@ struct nand_flash_dev nand_flash_ids[] = - {"TC58NVG0S3E 1G 3.3V 8-bit", - { .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} }, - SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), }, -+ {"TC58NVG0S3HTA00 1G 3.3V 8-bit", /* possibly counterfeit chip - see commit */ -+ { .id = {0x98, 0xf1, 0x80, 0x15} }, /* should be more bytes */ -+ SZ_2K, SZ_128, SZ_128K, 0, 8, 128, NAND_ECC_INFO(8, SZ_512), }, - {"TC58NVG2S0F 4G 3.3V 8-bit", - { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} }, - SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) }, diff --git a/target/linux/ipq40xx/patches-6.1/700-net-ipqess-introduce-the-Qualcomm-IPQESS-driver.patch b/target/linux/ipq40xx/patches-6.1/700-net-ipqess-introduce-the-Qualcomm-IPQESS-driver.patch deleted file mode 100644 index be12bfcd21..0000000000 --- a/target/linux/ipq40xx/patches-6.1/700-net-ipqess-introduce-the-Qualcomm-IPQESS-driver.patch +++ /dev/null @@ -1,2025 +0,0 @@ -From 76e25c1f46456416ba5358be8a0677f1ab8196b6 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier <maxime.chevallier@bootlin.com> -Date: Fri, 4 Nov 2022 18:41:48 +0100 -Subject: [PATCH] net: ipqess: introduce the Qualcomm IPQESS driver - -The Qualcomm IPQESS controller is a simple 1G Ethernet controller found -on the IPQ4019 chip. This controller has some specificities, in that the -IPQ4019 platform that includes that controller also has an internal -switch, based on the QCA8K IP. - -It is connected to that switch through an internal link, and doesn't -expose directly any external interface, hence it only supports the -PHY_INTERFACE_MODE_INTERNAL for now. - -It has 16 RX and TX queues, with a very basic RSS fanout configured at -init time. - -Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> ---- - MAINTAINERS | 7 + - drivers/net/ethernet/qualcomm/Kconfig | 11 + - drivers/net/ethernet/qualcomm/Makefile | 2 + - drivers/net/ethernet/qualcomm/ipqess/Makefile | 8 + - drivers/net/ethernet/qualcomm/ipqess/ipqess.c | 1246 +++++++++++++++++ - drivers/net/ethernet/qualcomm/ipqess/ipqess.h | 518 +++++++ - .../ethernet/qualcomm/ipqess/ipqess_ethtool.c | 164 +++ - 7 files changed, 1956 insertions(+) - create mode 100644 drivers/net/ethernet/qualcomm/ipqess/Makefile - create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess.c - create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess.h - create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -17075,6 +17075,13 @@ L: netdev@vger.kernel.org - S: Maintained - F: drivers/net/ethernet/qualcomm/emac/ - -+QUALCOMM IPQESS ETHERNET DRIVER -+M: Maxime Chevallier <maxime.chevallier@bootlin.com> -+L: netdev@vger.kernel.org -+S: Maintained -+F: Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml -+F: drivers/net/ethernet/qualcomm/ipqess/ -+ - QUALCOMM ETHQOS ETHERNET DRIVER - M: Vinod Koul <vkoul@kernel.org> - R: Bhupesh Sharma <bhupesh.sharma@linaro.org> ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -60,6 +60,17 @@ config QCOM_EMAC - low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 - Precision Clock Synchronization Protocol. - -+config QCOM_IPQ4019_ESS_EDMA -+ tristate "Qualcomm Atheros IPQ4019 ESS EDMA support" -+ depends on (OF && ARCH_QCOM) || COMPILE_TEST -+ select PHYLINK -+ help -+ This driver supports the Qualcomm Atheros IPQ40xx built-in -+ ESS EDMA ethernet controller. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ipqess. -+ - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -11,4 +11,6 @@ qcauart-objs := qca_uart.o - - obj-y += emac/ - -+obj-$(CONFIG_QCOM_IPQ4019_ESS_EDMA) += ipqess/ -+ - obj-$(CONFIG_RMNET) += rmnet/ ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/ipqess/Makefile -@@ -0,0 +1,8 @@ -+# SPDX-License-Identifier: GPL-2.0-only -+# -+# Makefile for the IPQ ESS driver -+# -+ -+obj-$(CONFIG_QCOM_IPQ4019_ESS_EDMA) += ipq_ess.o -+ -+ipq_ess-objs := ipqess.o ipqess_ethtool.o ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -@@ -0,0 +1,1246 @@ -+// SPDX-License-Identifier: GPL-2.0 OR ISC -+/* Copyright (c) 2014 - 2017, The Linux Foundation. All rights reserved. -+ * Copyright (c) 2017 - 2018, John Crispin <john@phrozen.org> -+ * Copyright (c) 2018 - 2019, Christian Lamparter <chunkeey@gmail.com> -+ * Copyright (c) 2020 - 2021, Gabor Juhos <j4g8y7@gmail.com> -+ * Copyright (c) 2021 - 2022, Maxime Chevallier <maxime.chevallier@bootlin.com> -+ * -+ */ -+ -+#include <linux/bitfield.h> -+#include <linux/clk.h> -+#include <linux/if_vlan.h> -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/of_device.h> -+#include <linux/of_mdio.h> -+#include <linux/of_net.h> -+#include <linux/phylink.h> -+#include <linux/platform_device.h> -+#include <linux/reset.h> -+#include <linux/skbuff.h> -+#include <linux/vmalloc.h> -+#include <net/checksum.h> -+#include <net/ip6_checksum.h> -+ -+#include "ipqess.h" -+ -+#define IPQESS_RRD_SIZE 16 -+#define IPQESS_NEXT_IDX(X, Y) (((X) + 1) & ((Y) - 1)) -+#define IPQESS_TX_DMA_BUF_LEN 0x3fff -+ -+static void ipqess_w32(struct ipqess *ess, u32 reg, u32 val) -+{ -+ writel(val, ess->hw_addr + reg); -+} -+ -+static u32 ipqess_r32(struct ipqess *ess, u16 reg) -+{ -+ return readl(ess->hw_addr + reg); -+} -+ -+static void ipqess_m32(struct ipqess *ess, u32 mask, u32 val, u16 reg) -+{ -+ u32 _val = ipqess_r32(ess, reg); -+ -+ _val &= ~mask; -+ _val |= val; -+ -+ ipqess_w32(ess, reg, _val); -+} -+ -+void ipqess_update_hw_stats(struct ipqess *ess) -+{ -+ u32 *p; -+ u32 stat; -+ int i; -+ -+ lockdep_assert_held(&ess->stats_lock); -+ -+ p = (u32 *)&ess->ipqess_stats; -+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) { -+ stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_PKT_Q(i)); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) { -+ stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_BYTE_Q(i)); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) { -+ stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_PKT_Q(i)); -+ *p += stat; -+ p++; -+ } -+ -+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) { -+ stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_BYTE_Q(i)); -+ *p += stat; -+ p++; -+ } -+} -+ -+static int ipqess_tx_ring_alloc(struct ipqess *ess) -+{ -+ struct device *dev = &ess->pdev->dev; -+ int i; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ struct ipqess_tx_ring *tx_ring = &ess->tx_ring[i]; -+ size_t size; -+ u32 idx; -+ -+ tx_ring->ess = ess; -+ tx_ring->ring_id = i; -+ tx_ring->idx = i * 4; -+ tx_ring->count = IPQESS_TX_RING_SIZE; -+ tx_ring->nq = netdev_get_tx_queue(ess->netdev, i); -+ -+ size = sizeof(struct ipqess_buf) * IPQESS_TX_RING_SIZE; -+ tx_ring->buf = devm_kzalloc(dev, size, GFP_KERNEL); -+ if (!tx_ring->buf) -+ return -ENOMEM; -+ -+ size = sizeof(struct ipqess_tx_desc) * IPQESS_TX_RING_SIZE; -+ tx_ring->hw_desc = dmam_alloc_coherent(dev, size, &tx_ring->dma, -+ GFP_KERNEL); -+ if (!tx_ring->hw_desc) -+ return -ENOMEM; -+ -+ ipqess_w32(ess, IPQESS_REG_TPD_BASE_ADDR_Q(tx_ring->idx), -+ (u32)tx_ring->dma); -+ -+ idx = ipqess_r32(ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx)); -+ idx >>= IPQESS_TPD_CONS_IDX_SHIFT; /* need u32 here */ -+ idx &= 0xffff; -+ tx_ring->head = idx; -+ tx_ring->tail = idx; -+ -+ ipqess_m32(ess, IPQESS_TPD_PROD_IDX_MASK << IPQESS_TPD_PROD_IDX_SHIFT, -+ idx, IPQESS_REG_TPD_IDX_Q(tx_ring->idx)); -+ ipqess_w32(ess, IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx), idx); -+ ipqess_w32(ess, IPQESS_REG_TPD_RING_SIZE, IPQESS_TX_RING_SIZE); -+ } -+ -+ return 0; -+} -+ -+static int ipqess_tx_unmap_and_free(struct device *dev, struct ipqess_buf *buf) -+{ -+ int len = 0; -+ -+ if (buf->flags & IPQESS_DESC_SINGLE) -+ dma_unmap_single(dev, buf->dma, buf->length, DMA_TO_DEVICE); -+ else if (buf->flags & IPQESS_DESC_PAGE) -+ dma_unmap_page(dev, buf->dma, buf->length, DMA_TO_DEVICE); -+ -+ if (buf->flags & IPQESS_DESC_LAST) { -+ len = buf->skb->len; -+ dev_kfree_skb_any(buf->skb); -+ } -+ -+ buf->flags = 0; -+ -+ return len; -+} -+ -+static void ipqess_tx_ring_free(struct ipqess *ess) -+{ -+ int i; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ int j; -+ -+ if (ess->tx_ring[i].hw_desc) -+ continue; -+ -+ for (j = 0; j < IPQESS_TX_RING_SIZE; j++) { -+ struct ipqess_buf *buf = &ess->tx_ring[i].buf[j]; -+ -+ ipqess_tx_unmap_and_free(&ess->pdev->dev, buf); -+ } -+ -+ ess->tx_ring[i].buf = NULL; -+ } -+} -+ -+static int ipqess_rx_buf_prepare(struct ipqess_buf *buf, -+ struct ipqess_rx_ring *rx_ring) -+{ -+ memset(buf->skb->data, 0, sizeof(struct ipqess_rx_desc)); -+ -+ buf->dma = dma_map_single(rx_ring->ppdev, buf->skb->data, -+ IPQESS_RX_HEAD_BUFF_SIZE, DMA_FROM_DEVICE); -+ if (dma_mapping_error(rx_ring->ppdev, buf->dma)) { -+ dev_kfree_skb_any(buf->skb); -+ buf->skb = NULL; -+ return -EFAULT; -+ } -+ -+ buf->length = IPQESS_RX_HEAD_BUFF_SIZE; -+ rx_ring->hw_desc[rx_ring->head] = (struct ipqess_rx_desc *)buf->dma; -+ rx_ring->head = (rx_ring->head + 1) % IPQESS_RX_RING_SIZE; -+ -+ ipqess_m32(rx_ring->ess, IPQESS_RFD_PROD_IDX_BITS, -+ (rx_ring->head + IPQESS_RX_RING_SIZE - 1) % IPQESS_RX_RING_SIZE, -+ IPQESS_REG_RFD_IDX_Q(rx_ring->idx)); -+ -+ return 0; -+} -+ -+/* locking is handled by the caller */ -+static int ipqess_rx_buf_alloc_napi(struct ipqess_rx_ring *rx_ring) -+{ -+ struct ipqess_buf *buf = &rx_ring->buf[rx_ring->head]; -+ -+ buf->skb = napi_alloc_skb(&rx_ring->napi_rx, IPQESS_RX_HEAD_BUFF_SIZE); -+ if (!buf->skb) -+ return -ENOMEM; -+ -+ return ipqess_rx_buf_prepare(buf, rx_ring); -+} -+ -+static int ipqess_rx_buf_alloc(struct ipqess_rx_ring *rx_ring) -+{ -+ struct ipqess_buf *buf = &rx_ring->buf[rx_ring->head]; -+ -+ buf->skb = netdev_alloc_skb_ip_align(rx_ring->ess->netdev, -+ IPQESS_RX_HEAD_BUFF_SIZE); -+ -+ if (!buf->skb) -+ return -ENOMEM; -+ -+ return ipqess_rx_buf_prepare(buf, rx_ring); -+} -+ -+static void ipqess_refill_work(struct work_struct *work) -+{ -+ struct ipqess_rx_ring_refill *rx_refill = container_of(work, -+ struct ipqess_rx_ring_refill, refill_work); -+ struct ipqess_rx_ring *rx_ring = rx_refill->rx_ring; -+ int refill = 0; -+ -+ /* don't let this loop by accident. */ -+ while (atomic_dec_and_test(&rx_ring->refill_count)) { -+ napi_disable(&rx_ring->napi_rx); -+ if (ipqess_rx_buf_alloc(rx_ring)) { -+ refill++; -+ dev_dbg(rx_ring->ppdev, -+ "Not all buffers were reallocated"); -+ } -+ napi_enable(&rx_ring->napi_rx); -+ } -+ -+ if (atomic_add_return(refill, &rx_ring->refill_count)) -+ schedule_work(&rx_refill->refill_work); -+} -+ -+static int ipqess_rx_ring_alloc(struct ipqess *ess) -+{ -+ int i; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ int j; -+ -+ ess->rx_ring[i].ess = ess; -+ ess->rx_ring[i].ppdev = &ess->pdev->dev; -+ ess->rx_ring[i].ring_id = i; -+ ess->rx_ring[i].idx = i * 2; -+ -+ ess->rx_ring[i].buf = devm_kzalloc(&ess->pdev->dev, -+ sizeof(struct ipqess_buf) * IPQESS_RX_RING_SIZE, -+ GFP_KERNEL); -+ -+ if (!ess->rx_ring[i].buf) -+ return -ENOMEM; -+ -+ ess->rx_ring[i].hw_desc = -+ dmam_alloc_coherent(&ess->pdev->dev, -+ sizeof(struct ipqess_rx_desc) * IPQESS_RX_RING_SIZE, -+ &ess->rx_ring[i].dma, GFP_KERNEL); -+ -+ if (!ess->rx_ring[i].hw_desc) -+ return -ENOMEM; -+ -+ for (j = 0; j < IPQESS_RX_RING_SIZE; j++) -+ if (ipqess_rx_buf_alloc(&ess->rx_ring[i]) < 0) -+ return -ENOMEM; -+ -+ ess->rx_refill[i].rx_ring = &ess->rx_ring[i]; -+ INIT_WORK(&ess->rx_refill[i].refill_work, ipqess_refill_work); -+ -+ ipqess_w32(ess, IPQESS_REG_RFD_BASE_ADDR_Q(ess->rx_ring[i].idx), -+ (u32)(ess->rx_ring[i].dma)); -+ } -+ -+ ipqess_w32(ess, IPQESS_REG_RX_DESC0, -+ (IPQESS_RX_HEAD_BUFF_SIZE << IPQESS_RX_BUF_SIZE_SHIFT) | -+ (IPQESS_RX_RING_SIZE << IPQESS_RFD_RING_SIZE_SHIFT)); -+ -+ return 0; -+} -+ -+static void ipqess_rx_ring_free(struct ipqess *ess) -+{ -+ int i; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ int j; -+ -+ cancel_work_sync(&ess->rx_refill[i].refill_work); -+ atomic_set(&ess->rx_ring[i].refill_count, 0); -+ -+ for (j = 0; j < IPQESS_RX_RING_SIZE; j++) { -+ dma_unmap_single(&ess->pdev->dev, -+ ess->rx_ring[i].buf[j].dma, -+ ess->rx_ring[i].buf[j].length, -+ DMA_FROM_DEVICE); -+ dev_kfree_skb_any(ess->rx_ring[i].buf[j].skb); -+ } -+ } -+} -+ -+static struct net_device_stats *ipqess_get_stats(struct net_device *netdev) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ -+ spin_lock(&ess->stats_lock); -+ ipqess_update_hw_stats(ess); -+ spin_unlock(&ess->stats_lock); -+ -+ return &ess->stats; -+} -+ -+static int ipqess_rx_poll(struct ipqess_rx_ring *rx_ring, int budget) -+{ -+ u32 length = 0, num_desc, tail, rx_ring_tail; -+ int done = 0; -+ -+ rx_ring_tail = rx_ring->tail; -+ -+ tail = ipqess_r32(rx_ring->ess, IPQESS_REG_RFD_IDX_Q(rx_ring->idx)); -+ tail >>= IPQESS_RFD_CONS_IDX_SHIFT; -+ tail &= IPQESS_RFD_CONS_IDX_MASK; -+ -+ while (done < budget) { -+ struct ipqess_rx_desc *rd; -+ struct sk_buff *skb; -+ -+ if (rx_ring_tail == tail) -+ break; -+ -+ dma_unmap_single(rx_ring->ppdev, -+ rx_ring->buf[rx_ring_tail].dma, -+ rx_ring->buf[rx_ring_tail].length, -+ DMA_FROM_DEVICE); -+ -+ skb = xchg(&rx_ring->buf[rx_ring_tail].skb, NULL); -+ rd = (struct ipqess_rx_desc *)skb->data; -+ rx_ring_tail = IPQESS_NEXT_IDX(rx_ring_tail, IPQESS_RX_RING_SIZE); -+ -+ /* Check if RRD is valid */ -+ if (!(rd->rrd7 & cpu_to_le16(IPQESS_RRD_DESC_VALID))) { -+ num_desc = 1; -+ dev_kfree_skb_any(skb); -+ goto skip; -+ } -+ -+ num_desc = le16_to_cpu(rd->rrd1) & IPQESS_RRD_NUM_RFD_MASK; -+ length = le16_to_cpu(rd->rrd6) & IPQESS_RRD_PKT_SIZE_MASK; -+ -+ skb_reserve(skb, IPQESS_RRD_SIZE); -+ if (num_desc > 1) { -+ struct sk_buff *skb_prev = NULL; -+ int size_remaining; -+ int i; -+ -+ skb->data_len = 0; -+ skb->tail += (IPQESS_RX_HEAD_BUFF_SIZE - IPQESS_RRD_SIZE); -+ skb->len = length; -+ skb->truesize = length; -+ size_remaining = length - (IPQESS_RX_HEAD_BUFF_SIZE - IPQESS_RRD_SIZE); -+ -+ for (i = 1; i < num_desc; i++) { -+ struct sk_buff *skb_temp = rx_ring->buf[rx_ring_tail].skb; -+ -+ dma_unmap_single(rx_ring->ppdev, -+ rx_ring->buf[rx_ring_tail].dma, -+ rx_ring->buf[rx_ring_tail].length, -+ DMA_FROM_DEVICE); -+ -+ skb_put(skb_temp, min(size_remaining, IPQESS_RX_HEAD_BUFF_SIZE)); -+ if (skb_prev) -+ skb_prev->next = rx_ring->buf[rx_ring_tail].skb; -+ else -+ skb_shinfo(skb)->frag_list = rx_ring->buf[rx_ring_tail].skb; -+ skb_prev = rx_ring->buf[rx_ring_tail].skb; -+ rx_ring->buf[rx_ring_tail].skb->next = NULL; -+ -+ skb->data_len += rx_ring->buf[rx_ring_tail].skb->len; -+ size_remaining -= rx_ring->buf[rx_ring_tail].skb->len; -+ -+ rx_ring_tail = IPQESS_NEXT_IDX(rx_ring_tail, IPQESS_RX_RING_SIZE); -+ } -+ -+ } else { -+ skb_put(skb, length); -+ } -+ -+ skb->dev = rx_ring->ess->netdev; -+ skb->protocol = eth_type_trans(skb, rx_ring->ess->netdev); -+ skb_record_rx_queue(skb, rx_ring->ring_id); -+ -+ if (rd->rrd6 & cpu_to_le16(IPQESS_RRD_CSUM_FAIL_MASK)) -+ skb_checksum_none_assert(skb); -+ else -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+ -+ if (rd->rrd7 & cpu_to_le16(IPQESS_RRD_CVLAN)) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), -+ le16_to_cpu(rd->rrd4)); -+ else if (rd->rrd1 & cpu_to_le16(IPQESS_RRD_SVLAN)) -+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), -+ le16_to_cpu(rd->rrd4)); -+ -+ napi_gro_receive(&rx_ring->napi_rx, skb); -+ -+ rx_ring->ess->stats.rx_packets++; -+ rx_ring->ess->stats.rx_bytes += length; -+ -+ done++; -+skip: -+ -+ num_desc += atomic_xchg(&rx_ring->refill_count, 0); -+ while (num_desc) { -+ if (ipqess_rx_buf_alloc_napi(rx_ring)) { -+ num_desc = atomic_add_return(num_desc, -+ &rx_ring->refill_count); -+ if (num_desc >= DIV_ROUND_UP(IPQESS_RX_RING_SIZE * 4, 7)) -+ schedule_work(&rx_ring->ess->rx_refill[rx_ring->ring_id].refill_work); -+ break; -+ } -+ num_desc--; -+ } -+ } -+ -+ ipqess_w32(rx_ring->ess, IPQESS_REG_RX_SW_CONS_IDX_Q(rx_ring->idx), -+ rx_ring_tail); -+ rx_ring->tail = rx_ring_tail; -+ -+ return done; -+} -+ -+static int ipqess_tx_complete(struct ipqess_tx_ring *tx_ring, int budget) -+{ -+ int total = 0, ret; -+ int done = 0; -+ u32 tail; -+ -+ tail = ipqess_r32(tx_ring->ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx)); -+ tail >>= IPQESS_TPD_CONS_IDX_SHIFT; -+ tail &= IPQESS_TPD_CONS_IDX_MASK; -+ -+ do { -+ ret = ipqess_tx_unmap_and_free(&tx_ring->ess->pdev->dev, -+ &tx_ring->buf[tx_ring->tail]); -+ tx_ring->tail = IPQESS_NEXT_IDX(tx_ring->tail, tx_ring->count); -+ -+ total += ret; -+ } while ((++done < budget) && (tx_ring->tail != tail)); -+ -+ ipqess_w32(tx_ring->ess, IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx), -+ tx_ring->tail); -+ -+ if (netif_tx_queue_stopped(tx_ring->nq)) { -+ netdev_dbg(tx_ring->ess->netdev, "waking up tx queue %d\n", -+ tx_ring->idx); -+ netif_tx_wake_queue(tx_ring->nq); -+ } -+ -+ netdev_tx_completed_queue(tx_ring->nq, done, total); -+ -+ return done; -+} -+ -+static int ipqess_tx_napi(struct napi_struct *napi, int budget) -+{ -+ struct ipqess_tx_ring *tx_ring = container_of(napi, struct ipqess_tx_ring, -+ napi_tx); -+ int work_done = 0; -+ u32 tx_status; -+ -+ tx_status = ipqess_r32(tx_ring->ess, IPQESS_REG_TX_ISR); -+ tx_status &= BIT(tx_ring->idx); -+ -+ work_done = ipqess_tx_complete(tx_ring, budget); -+ -+ ipqess_w32(tx_ring->ess, IPQESS_REG_TX_ISR, tx_status); -+ -+ if (likely(work_done < budget)) { -+ if (napi_complete_done(napi, work_done)) -+ ipqess_w32(tx_ring->ess, -+ IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), 0x1); -+ } -+ -+ return work_done; -+} -+ -+static int ipqess_rx_napi(struct napi_struct *napi, int budget) -+{ -+ struct ipqess_rx_ring *rx_ring = container_of(napi, struct ipqess_rx_ring, -+ napi_rx); -+ struct ipqess *ess = rx_ring->ess; -+ u32 rx_mask = BIT(rx_ring->idx); -+ int remaining_budget = budget; -+ int rx_done; -+ u32 status; -+ -+ do { -+ ipqess_w32(ess, IPQESS_REG_RX_ISR, rx_mask); -+ rx_done = ipqess_rx_poll(rx_ring, remaining_budget); -+ remaining_budget -= rx_done; -+ -+ status = ipqess_r32(ess, IPQESS_REG_RX_ISR); -+ } while (remaining_budget > 0 && (status & rx_mask)); -+ -+ if (remaining_budget <= 0) -+ return budget; -+ -+ if (napi_complete_done(napi, budget - remaining_budget)) -+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx), 0x1); -+ -+ return budget - remaining_budget; -+} -+ -+static irqreturn_t ipqess_interrupt_tx(int irq, void *priv) -+{ -+ struct ipqess_tx_ring *tx_ring = (struct ipqess_tx_ring *)priv; -+ -+ if (likely(napi_schedule_prep(&tx_ring->napi_tx))) { -+ __napi_schedule(&tx_ring->napi_tx); -+ ipqess_w32(tx_ring->ess, IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), -+ 0x0); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t ipqess_interrupt_rx(int irq, void *priv) -+{ -+ struct ipqess_rx_ring *rx_ring = (struct ipqess_rx_ring *)priv; -+ -+ if (likely(napi_schedule_prep(&rx_ring->napi_rx))) { -+ __napi_schedule(&rx_ring->napi_rx); -+ ipqess_w32(rx_ring->ess, IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx), -+ 0x0); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static void ipqess_irq_enable(struct ipqess *ess) -+{ -+ int i; -+ -+ ipqess_w32(ess, IPQESS_REG_RX_ISR, 0xff); -+ ipqess_w32(ess, IPQESS_REG_TX_ISR, 0xffff); -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(ess->rx_ring[i].idx), 1); -+ ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(ess->tx_ring[i].idx), 1); -+ } -+} -+ -+static void ipqess_irq_disable(struct ipqess *ess) -+{ -+ int i; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(ess->rx_ring[i].idx), 0); -+ ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(ess->tx_ring[i].idx), 0); -+ } -+} -+ -+static int __init ipqess_init(struct net_device *netdev) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ struct device_node *of_node = ess->pdev->dev.of_node; -+ int ret; -+ -+ ret = of_get_ethdev_address(of_node, netdev); -+ if (ret) -+ eth_hw_addr_random(netdev); -+ -+ return phylink_of_phy_connect(ess->phylink, of_node, 0); -+} -+ -+static void ipqess_uninit(struct net_device *netdev) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ -+ phylink_disconnect_phy(ess->phylink); -+} -+ -+static int ipqess_open(struct net_device *netdev) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ int i, err; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ int qid; -+ -+ qid = ess->tx_ring[i].idx; -+ err = devm_request_irq(&netdev->dev, ess->tx_irq[qid], -+ ipqess_interrupt_tx, 0, -+ ess->tx_irq_names[qid], -+ &ess->tx_ring[i]); -+ if (err) -+ return err; -+ -+ qid = ess->rx_ring[i].idx; -+ err = devm_request_irq(&netdev->dev, ess->rx_irq[qid], -+ ipqess_interrupt_rx, 0, -+ ess->rx_irq_names[qid], -+ &ess->rx_ring[i]); -+ if (err) -+ return err; -+ -+ napi_enable(&ess->tx_ring[i].napi_tx); -+ napi_enable(&ess->rx_ring[i].napi_rx); -+ } -+ -+ ipqess_irq_enable(ess); -+ phylink_start(ess->phylink); -+ netif_tx_start_all_queues(netdev); -+ -+ return 0; -+} -+ -+static int ipqess_stop(struct net_device *netdev) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ int i; -+ -+ netif_tx_stop_all_queues(netdev); -+ phylink_stop(ess->phylink); -+ ipqess_irq_disable(ess); -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ napi_disable(&ess->tx_ring[i].napi_tx); -+ napi_disable(&ess->rx_ring[i].napi_rx); -+ } -+ -+ return 0; -+} -+ -+static int ipqess_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ -+ return phylink_mii_ioctl(ess->phylink, ifr, cmd); -+} -+ -+static u16 ipqess_tx_desc_available(struct ipqess_tx_ring *tx_ring) -+{ -+ u16 count = 0; -+ -+ if (tx_ring->tail <= tx_ring->head) -+ count = IPQESS_TX_RING_SIZE; -+ -+ count += tx_ring->tail - tx_ring->head - 1; -+ -+ return count; -+} -+ -+static int ipqess_cal_txd_req(struct sk_buff *skb) -+{ -+ int tpds; -+ -+ /* one TPD for the header, and one for each fragments */ -+ tpds = 1 + skb_shinfo(skb)->nr_frags; -+ if (skb_is_gso(skb) && skb_is_gso_v6(skb)) { -+ /* for LSOv2 one extra TPD is needed */ -+ tpds++; -+ } -+ -+ return tpds; -+} -+ -+static struct ipqess_buf *ipqess_get_tx_buffer(struct ipqess_tx_ring *tx_ring, -+ struct ipqess_tx_desc *desc) -+{ -+ return &tx_ring->buf[desc - tx_ring->hw_desc]; -+} -+ -+static struct ipqess_tx_desc *ipqess_tx_desc_next(struct ipqess_tx_ring *tx_ring) -+{ -+ struct ipqess_tx_desc *desc; -+ -+ desc = &tx_ring->hw_desc[tx_ring->head]; -+ tx_ring->head = IPQESS_NEXT_IDX(tx_ring->head, tx_ring->count); -+ -+ return desc; -+} -+ -+static void ipqess_rollback_tx(struct ipqess *eth, -+ struct ipqess_tx_desc *first_desc, int ring_id) -+{ -+ struct ipqess_tx_ring *tx_ring = ð->tx_ring[ring_id]; -+ struct ipqess_tx_desc *desc = NULL; -+ struct ipqess_buf *buf; -+ u16 start_index, index; -+ -+ start_index = first_desc - tx_ring->hw_desc; -+ -+ index = start_index; -+ while (index != tx_ring->head) { -+ desc = &tx_ring->hw_desc[index]; -+ buf = &tx_ring->buf[index]; -+ ipqess_tx_unmap_and_free(ð->pdev->dev, buf); -+ memset(desc, 0, sizeof(*desc)); -+ if (++index == tx_ring->count) -+ index = 0; -+ } -+ tx_ring->head = start_index; -+} -+ -+static int ipqess_tx_map_and_fill(struct ipqess_tx_ring *tx_ring, -+ struct sk_buff *skb) -+{ -+ struct ipqess_tx_desc *desc = NULL, *first_desc = NULL; -+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0; -+ struct platform_device *pdev = tx_ring->ess->pdev; -+ struct ipqess_buf *buf = NULL; -+ u16 len; -+ int i; -+ -+ if (skb_is_gso(skb)) { -+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { -+ lso_word1 |= IPQESS_TPD_IPV4_EN; -+ ip_hdr(skb)->check = 0; -+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, -+ ip_hdr(skb)->daddr, -+ 0, IPPROTO_TCP, 0); -+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) { -+ lso_word1 |= IPQESS_TPD_LSO_V2_EN; -+ ipv6_hdr(skb)->payload_len = 0; -+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, -+ &ipv6_hdr(skb)->daddr, -+ 0, IPPROTO_TCP, 0); -+ } -+ -+ lso_word1 |= IPQESS_TPD_LSO_EN | -+ ((skb_shinfo(skb)->gso_size & IPQESS_TPD_MSS_MASK) << -+ IPQESS_TPD_MSS_SHIFT) | -+ (skb_transport_offset(skb) << IPQESS_TPD_HDR_SHIFT); -+ } else if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { -+ u8 css, cso; -+ -+ cso = skb_checksum_start_offset(skb); -+ css = cso + skb->csum_offset; -+ -+ word1 |= (IPQESS_TPD_CUSTOM_CSUM_EN); -+ word1 |= (cso >> 1) << IPQESS_TPD_HDR_SHIFT; -+ word1 |= ((css >> 1) << IPQESS_TPD_CUSTOM_CSUM_SHIFT); -+ } -+ -+ if (skb_vlan_tag_present(skb)) { -+ switch (skb->vlan_proto) { -+ case htons(ETH_P_8021Q): -+ word3 |= BIT(IPQESS_TX_INS_CVLAN); -+ word3 |= skb_vlan_tag_get(skb) << IPQESS_TX_CVLAN_TAG_SHIFT; -+ break; -+ case htons(ETH_P_8021AD): -+ word1 |= BIT(IPQESS_TX_INS_SVLAN); -+ svlan_tag = skb_vlan_tag_get(skb); -+ break; -+ default: -+ dev_err(&pdev->dev, "no ctag or stag present\n"); -+ goto vlan_tag_error; -+ } -+ } -+ -+ if (eth_type_vlan(skb->protocol)) -+ word1 |= IPQESS_TPD_VLAN_TAGGED; -+ -+ if (skb->protocol == htons(ETH_P_PPP_SES)) -+ word1 |= IPQESS_TPD_PPPOE_EN; -+ -+ len = skb_headlen(skb); -+ -+ first_desc = ipqess_tx_desc_next(tx_ring); -+ desc = first_desc; -+ if (lso_word1 & IPQESS_TPD_LSO_V2_EN) { -+ desc->addr = cpu_to_le32(skb->len); -+ desc->word1 = cpu_to_le32(word1 | lso_word1); -+ desc->svlan_tag = cpu_to_le16(svlan_tag); -+ desc->word3 = cpu_to_le32(word3); -+ desc = ipqess_tx_desc_next(tx_ring); -+ } -+ -+ buf = ipqess_get_tx_buffer(tx_ring, desc); -+ buf->length = len; -+ buf->dma = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(&pdev->dev, buf->dma)) -+ goto dma_error; -+ -+ desc->addr = cpu_to_le32(buf->dma); -+ desc->len = cpu_to_le16(len); -+ -+ buf->flags |= IPQESS_DESC_SINGLE; -+ desc->word1 = cpu_to_le32(word1 | lso_word1); -+ desc->svlan_tag = cpu_to_le16(svlan_tag); -+ desc->word3 = cpu_to_le32(word3); -+ -+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { -+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; -+ -+ len = skb_frag_size(frag); -+ desc = ipqess_tx_desc_next(tx_ring); -+ buf = ipqess_get_tx_buffer(tx_ring, desc); -+ buf->length = len; -+ buf->flags |= IPQESS_DESC_PAGE; -+ buf->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len, -+ DMA_TO_DEVICE); -+ -+ if (dma_mapping_error(&pdev->dev, buf->dma)) -+ goto dma_error; -+ -+ desc->addr = cpu_to_le32(buf->dma); -+ desc->len = cpu_to_le16(len); -+ desc->svlan_tag = cpu_to_le16(svlan_tag); -+ desc->word1 = cpu_to_le32(word1 | lso_word1); -+ desc->word3 = cpu_to_le32(word3); -+ } -+ desc->word1 |= cpu_to_le32(1 << IPQESS_TPD_EOP_SHIFT); -+ buf->skb = skb; -+ buf->flags |= IPQESS_DESC_LAST; -+ -+ return 0; -+ -+dma_error: -+ ipqess_rollback_tx(tx_ring->ess, first_desc, tx_ring->ring_id); -+ dev_err(&pdev->dev, "TX DMA map failed\n"); -+ -+vlan_tag_error: -+ return -ENOMEM; -+} -+ -+static void ipqess_kick_tx(struct ipqess_tx_ring *tx_ring) -+{ -+ /* Ensure that all TPDs has been written completely */ -+ dma_wmb(); -+ -+ /* update software producer index */ -+ ipqess_w32(tx_ring->ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx), -+ tx_ring->head); -+} -+ -+static netdev_tx_t ipqess_xmit(struct sk_buff *skb, struct net_device *netdev) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ struct ipqess_tx_ring *tx_ring; -+ int avail; -+ int tx_num; -+ int ret; -+ -+ tx_ring = &ess->tx_ring[skb_get_queue_mapping(skb)]; -+ tx_num = ipqess_cal_txd_req(skb); -+ avail = ipqess_tx_desc_available(tx_ring); -+ if (avail < tx_num) { -+ netdev_dbg(netdev, -+ "stopping tx queue %d, avail=%d req=%d im=%x\n", -+ tx_ring->idx, avail, tx_num, -+ ipqess_r32(tx_ring->ess, -+ IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx))); -+ netif_tx_stop_queue(tx_ring->nq); -+ ipqess_w32(tx_ring->ess, IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), 0x1); -+ ipqess_kick_tx(tx_ring); -+ return NETDEV_TX_BUSY; -+ } -+ -+ ret = ipqess_tx_map_and_fill(tx_ring, skb); -+ if (ret) { -+ dev_kfree_skb_any(skb); -+ ess->stats.tx_errors++; -+ goto err_out; -+ } -+ -+ ess->stats.tx_packets++; -+ ess->stats.tx_bytes += skb->len; -+ netdev_tx_sent_queue(tx_ring->nq, skb->len); -+ -+ if (!netdev_xmit_more() || netif_xmit_stopped(tx_ring->nq)) -+ ipqess_kick_tx(tx_ring); -+ -+err_out: -+ return NETDEV_TX_OK; -+} -+ -+static int ipqess_set_mac_address(struct net_device *netdev, void *p) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ const char *macaddr = netdev->dev_addr; -+ int ret = eth_mac_addr(netdev, p); -+ -+ if (ret) -+ return ret; -+ -+ ipqess_w32(ess, IPQESS_REG_MAC_CTRL1, (macaddr[0] << 8) | macaddr[1]); -+ ipqess_w32(ess, IPQESS_REG_MAC_CTRL0, -+ (macaddr[2] << 24) | (macaddr[3] << 16) | (macaddr[4] << 8) | -+ macaddr[5]); -+ -+ return 0; -+} -+ -+static void ipqess_tx_timeout(struct net_device *netdev, unsigned int txq_id) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ struct ipqess_tx_ring *tr = &ess->tx_ring[txq_id]; -+ -+ netdev_warn(netdev, "TX timeout on queue %d\n", tr->idx); -+} -+ -+static const struct net_device_ops ipqess_axi_netdev_ops = { -+ .ndo_init = ipqess_init, -+ .ndo_uninit = ipqess_uninit, -+ .ndo_open = ipqess_open, -+ .ndo_stop = ipqess_stop, -+ .ndo_do_ioctl = ipqess_do_ioctl, -+ .ndo_start_xmit = ipqess_xmit, -+ .ndo_get_stats = ipqess_get_stats, -+ .ndo_set_mac_address = ipqess_set_mac_address, -+ .ndo_tx_timeout = ipqess_tx_timeout, -+}; -+ -+static void ipqess_hw_stop(struct ipqess *ess) -+{ -+ int i; -+ -+ /* disable all RX queue IRQs */ -+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) -+ ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(i), 0); -+ -+ /* disable all TX queue IRQs */ -+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) -+ ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(i), 0); -+ -+ /* disable all other IRQs */ -+ ipqess_w32(ess, IPQESS_REG_MISC_IMR, 0); -+ ipqess_w32(ess, IPQESS_REG_WOL_IMR, 0); -+ -+ /* clear the IRQ status registers */ -+ ipqess_w32(ess, IPQESS_REG_RX_ISR, 0xff); -+ ipqess_w32(ess, IPQESS_REG_TX_ISR, 0xffff); -+ ipqess_w32(ess, IPQESS_REG_MISC_ISR, 0x1fff); -+ ipqess_w32(ess, IPQESS_REG_WOL_ISR, 0x1); -+ ipqess_w32(ess, IPQESS_REG_WOL_CTRL, 0); -+ -+ /* disable RX and TX queues */ -+ ipqess_m32(ess, IPQESS_RXQ_CTRL_EN_MASK, 0, IPQESS_REG_RXQ_CTRL); -+ ipqess_m32(ess, IPQESS_TXQ_CTRL_TXQ_EN, 0, IPQESS_REG_TXQ_CTRL); -+} -+ -+static int ipqess_hw_init(struct ipqess *ess) -+{ -+ int i, err; -+ u32 tmp; -+ -+ ipqess_hw_stop(ess); -+ -+ ipqess_m32(ess, BIT(IPQESS_INTR_SW_IDX_W_TYP_SHIFT), -+ IPQESS_INTR_SW_IDX_W_TYPE << IPQESS_INTR_SW_IDX_W_TYP_SHIFT, -+ IPQESS_REG_INTR_CTRL); -+ -+ /* enable IRQ delay slot */ -+ ipqess_w32(ess, IPQESS_REG_IRQ_MODRT_TIMER_INIT, -+ (IPQESS_TX_IMT << IPQESS_IRQ_MODRT_TX_TIMER_SHIFT) | -+ (IPQESS_RX_IMT << IPQESS_IRQ_MODRT_RX_TIMER_SHIFT)); -+ -+ /* Set Customer and Service VLAN TPIDs */ -+ ipqess_w32(ess, IPQESS_REG_VLAN_CFG, -+ (ETH_P_8021Q << IPQESS_VLAN_CFG_CVLAN_TPID_SHIFT) | -+ (ETH_P_8021AD << IPQESS_VLAN_CFG_SVLAN_TPID_SHIFT)); -+ -+ /* Configure the TX Queue bursting */ -+ ipqess_w32(ess, IPQESS_REG_TXQ_CTRL, -+ (IPQESS_TPD_BURST << IPQESS_TXQ_NUM_TPD_BURST_SHIFT) | -+ (IPQESS_TXF_BURST << IPQESS_TXQ_TXF_BURST_NUM_SHIFT) | -+ IPQESS_TXQ_CTRL_TPD_BURST_EN); -+ -+ /* Set RSS type */ -+ ipqess_w32(ess, IPQESS_REG_RSS_TYPE, -+ IPQESS_RSS_TYPE_IPV4TCP | IPQESS_RSS_TYPE_IPV6_TCP | -+ IPQESS_RSS_TYPE_IPV4_UDP | IPQESS_RSS_TYPE_IPV6UDP | -+ IPQESS_RSS_TYPE_IPV4 | IPQESS_RSS_TYPE_IPV6); -+ -+ /* Set RFD ring burst and threshold */ -+ ipqess_w32(ess, IPQESS_REG_RX_DESC1, -+ (IPQESS_RFD_BURST << IPQESS_RXQ_RFD_BURST_NUM_SHIFT) | -+ (IPQESS_RFD_THR << IPQESS_RXQ_RFD_PF_THRESH_SHIFT) | -+ (IPQESS_RFD_LTHR << IPQESS_RXQ_RFD_LOW_THRESH_SHIFT)); -+ -+ /* Set Rx FIFO -+ * - threshold to start to DMA data to host -+ */ -+ ipqess_w32(ess, IPQESS_REG_RXQ_CTRL, -+ IPQESS_FIFO_THRESH_128_BYTE | IPQESS_RXQ_CTRL_RMV_VLAN); -+ -+ err = ipqess_rx_ring_alloc(ess); -+ if (err) -+ return err; -+ -+ err = ipqess_tx_ring_alloc(ess); -+ if (err) -+ goto err_rx_ring_free; -+ -+ /* Load all of ring base addresses above into the dma engine */ -+ ipqess_m32(ess, 0, BIT(IPQESS_LOAD_PTR_SHIFT), IPQESS_REG_TX_SRAM_PART); -+ -+ /* Disable TX FIFO low watermark and high watermark */ -+ ipqess_w32(ess, IPQESS_REG_TXF_WATER_MARK, 0); -+ -+ /* Configure RSS indirection table. -+ * 128 hash will be configured in the following -+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively -+ * and so on -+ */ -+ for (i = 0; i < IPQESS_NUM_IDT; i++) -+ ipqess_w32(ess, IPQESS_REG_RSS_IDT(i), IPQESS_RSS_IDT_VALUE); -+ -+ /* Configure load balance mapping table. -+ * 4 table entry will be configured according to the -+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4} -+ * respectively. -+ */ -+ ipqess_w32(ess, IPQESS_REG_LB_RING, IPQESS_LB_REG_VALUE); -+ -+ /* Configure Virtual queue for Tx rings */ -+ ipqess_w32(ess, IPQESS_REG_VQ_CTRL0, IPQESS_VQ_REG_VALUE); -+ ipqess_w32(ess, IPQESS_REG_VQ_CTRL1, IPQESS_VQ_REG_VALUE); -+ -+ /* Configure Max AXI Burst write size to 128 bytes*/ -+ ipqess_w32(ess, IPQESS_REG_AXIW_CTRL_MAXWRSIZE, -+ IPQESS_AXIW_MAXWRSIZE_VALUE); -+ -+ /* Enable TX queues */ -+ ipqess_m32(ess, 0, IPQESS_TXQ_CTRL_TXQ_EN, IPQESS_REG_TXQ_CTRL); -+ -+ /* Enable RX queues */ -+ tmp = 0; -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) -+ tmp |= IPQESS_RXQ_CTRL_EN(ess->rx_ring[i].idx); -+ -+ ipqess_m32(ess, IPQESS_RXQ_CTRL_EN_MASK, tmp, IPQESS_REG_RXQ_CTRL); -+ -+ return 0; -+ -+err_rx_ring_free: -+ -+ ipqess_rx_ring_free(ess); -+ return err; -+} -+ -+static void ipqess_mac_config(struct phylink_config *config, unsigned int mode, -+ const struct phylink_link_state *state) -+{ -+ /* Nothing to do, use fixed Internal mode */ -+} -+ -+static void ipqess_mac_link_down(struct phylink_config *config, -+ unsigned int mode, -+ phy_interface_t interface) -+{ -+ /* Nothing to do, use fixed Internal mode */ -+} -+ -+static void ipqess_mac_link_up(struct phylink_config *config, -+ struct phy_device *phy, unsigned int mode, -+ phy_interface_t interface, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) -+{ -+ /* Nothing to do, use fixed Internal mode */ -+} -+ -+static struct phylink_mac_ops ipqess_phylink_mac_ops = { -+ .validate = phylink_generic_validate, -+ .mac_config = ipqess_mac_config, -+ .mac_link_up = ipqess_mac_link_up, -+ .mac_link_down = ipqess_mac_link_down, -+}; -+ -+static void ipqess_reset(struct ipqess *ess) -+{ -+ reset_control_assert(ess->ess_rst); -+ -+ mdelay(10); -+ -+ reset_control_deassert(ess->ess_rst); -+ -+ /* Waiting for all inner tables to be flushed and reinitialized. -+ * This takes between 5 and 10 ms -+ */ -+ -+ mdelay(10); -+} -+ -+static int ipqess_axi_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct net_device *netdev; -+ phy_interface_t phy_mode; -+ struct ipqess *ess; -+ int i, err = 0; -+ -+ netdev = devm_alloc_etherdev_mqs(&pdev->dev, sizeof(*ess), -+ IPQESS_NETDEV_QUEUES, -+ IPQESS_NETDEV_QUEUES); -+ if (!netdev) -+ return -ENOMEM; -+ -+ ess = netdev_priv(netdev); -+ ess->netdev = netdev; -+ ess->pdev = pdev; -+ spin_lock_init(&ess->stats_lock); -+ SET_NETDEV_DEV(netdev, &pdev->dev); -+ platform_set_drvdata(pdev, netdev); -+ -+ ess->hw_addr = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); -+ if (IS_ERR(ess->hw_addr)) -+ return PTR_ERR(ess->hw_addr); -+ -+ err = of_get_phy_mode(np, &phy_mode); -+ if (err) { -+ dev_err(&pdev->dev, "incorrect phy-mode\n"); -+ return err; -+ } -+ -+ ess->ess_clk = devm_clk_get(&pdev->dev, NULL); -+ if (!IS_ERR(ess->ess_clk)) -+ clk_prepare_enable(ess->ess_clk); -+ -+ ess->ess_rst = devm_reset_control_get(&pdev->dev, NULL); -+ if (IS_ERR(ess->ess_rst)) -+ goto err_clk; -+ -+ ipqess_reset(ess); -+ -+ ess->phylink_config.dev = &netdev->dev; -+ ess->phylink_config.type = PHYLINK_NETDEV; -+ ess->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 | -+ MAC_100 | MAC_1000FD; -+ -+ __set_bit(PHY_INTERFACE_MODE_INTERNAL, -+ ess->phylink_config.supported_interfaces); -+ -+ ess->phylink = phylink_create(&ess->phylink_config, -+ of_fwnode_handle(np), phy_mode, -+ &ipqess_phylink_mac_ops); -+ if (IS_ERR(ess->phylink)) { -+ err = PTR_ERR(ess->phylink); -+ goto err_clk; -+ } -+ -+ for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) { -+ ess->tx_irq[i] = platform_get_irq(pdev, i); -+ scnprintf(ess->tx_irq_names[i], sizeof(ess->tx_irq_names[i]), -+ "%s:txq%d", pdev->name, i); -+ } -+ -+ for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) { -+ ess->rx_irq[i] = platform_get_irq(pdev, i + IPQESS_MAX_TX_QUEUE); -+ scnprintf(ess->rx_irq_names[i], sizeof(ess->rx_irq_names[i]), -+ "%s:rxq%d", pdev->name, i); -+ } -+ -+ netdev->netdev_ops = &ipqess_axi_netdev_ops; -+ netdev->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | -+ NETIF_F_HW_VLAN_CTAG_RX | -+ NETIF_F_HW_VLAN_CTAG_TX | -+ NETIF_F_TSO | NETIF_F_GRO | NETIF_F_SG; -+ /* feature change is not supported yet */ -+ netdev->hw_features = 0; -+ netdev->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_RXCSUM | -+ NETIF_F_TSO | -+ NETIF_F_GRO; -+ netdev->watchdog_timeo = 5 * HZ; -+ netdev->base_addr = (u32)ess->hw_addr; -+ netdev->max_mtu = 9000; -+ netdev->gso_max_segs = IPQESS_TX_RING_SIZE / 2; -+ -+ ipqess_set_ethtool_ops(netdev); -+ -+ err = ipqess_hw_init(ess); -+ if (err) -+ goto err_phylink; -+ -+ for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ netif_napi_add_tx(netdev, &ess->tx_ring[i].napi_tx, ipqess_tx_napi); -+ netif_napi_add(netdev, &ess->rx_ring[i].napi_rx, ipqess_rx_napi); -+ } -+ -+ err = register_netdev(netdev); -+ if (err) -+ goto err_hw_stop; -+ -+ return 0; -+ -+err_hw_stop: -+ ipqess_hw_stop(ess); -+ -+ ipqess_tx_ring_free(ess); -+ ipqess_rx_ring_free(ess); -+err_phylink: -+ phylink_destroy(ess->phylink); -+ -+err_clk: -+ clk_disable_unprepare(ess->ess_clk); -+ -+ return err; -+} -+ -+static int ipqess_axi_remove(struct platform_device *pdev) -+{ -+ const struct net_device *netdev = platform_get_drvdata(pdev); -+ struct ipqess *ess = netdev_priv(netdev); -+ -+ unregister_netdev(ess->netdev); -+ ipqess_hw_stop(ess); -+ -+ ipqess_tx_ring_free(ess); -+ ipqess_rx_ring_free(ess); -+ -+ phylink_destroy(ess->phylink); -+ clk_disable_unprepare(ess->ess_clk); -+ -+ return 0; -+} -+ -+static const struct of_device_id ipqess_of_mtable[] = { -+ {.compatible = "qcom,ipq4019-ess-edma" }, -+ {} -+}; -+MODULE_DEVICE_TABLE(of, ipqess_of_mtable); -+ -+static struct platform_driver ipqess_axi_driver = { -+ .driver = { -+ .name = "ipqess-edma", -+ .of_match_table = ipqess_of_mtable, -+ }, -+ .probe = ipqess_axi_probe, -+ .remove = ipqess_axi_remove, -+}; -+ -+module_platform_driver(ipqess_axi_driver); -+ -+MODULE_AUTHOR("Qualcomm Atheros Inc"); -+MODULE_AUTHOR("John Crispin <john@phrozen.org>"); -+MODULE_AUTHOR("Christian Lamparter <chunkeey@gmail.com>"); -+MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>"); -+MODULE_AUTHOR("Maxime Chevallier <maxime.chevallier@bootlin.com>"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.h -@@ -0,0 +1,518 @@ -+/* SPDX-License-Identifier: (GPL-2.0 OR ISC) */ -+/* Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. -+ * Copyright (c) 2017 - 2018, John Crispin <john@phrozen.org> -+ * Copyright (c) 2018 - 2019, Christian Lamparter <chunkeey@gmail.com> -+ * Copyright (c) 2020 - 2021, Gabor Juhos <j4g8y7@gmail.com> -+ * Copyright (c) 2021 - 2022, Maxime Chevallier <maxime.chevallier@bootlin.com> -+ * -+ */ -+ -+#ifndef _IPQESS_H_ -+#define _IPQESS_H_ -+ -+#define IPQESS_NETDEV_QUEUES 4 -+ -+#define IPQESS_TPD_EOP_SHIFT 31 -+ -+#define IPQESS_PORT_ID_SHIFT 12 -+#define IPQESS_PORT_ID_MASK 0x7 -+ -+/* tpd word 3 bit 18-28 */ -+#define IPQESS_TPD_PORT_BITMAP_SHIFT 18 -+ -+#define IPQESS_TPD_FROM_CPU_SHIFT 25 -+ -+#define IPQESS_RX_RING_SIZE 128 -+#define IPQESS_RX_HEAD_BUFF_SIZE 1540 -+#define IPQESS_TX_RING_SIZE 128 -+#define IPQESS_MAX_RX_QUEUE 8 -+#define IPQESS_MAX_TX_QUEUE 16 -+ -+/* Configurations */ -+#define IPQESS_INTR_CLEAR_TYPE 0 -+#define IPQESS_INTR_SW_IDX_W_TYPE 0 -+#define IPQESS_FIFO_THRESH_TYPE 0 -+#define IPQESS_RSS_TYPE 0 -+#define IPQESS_RX_IMT 0x0020 -+#define IPQESS_TX_IMT 0x0050 -+#define IPQESS_TPD_BURST 5 -+#define IPQESS_TXF_BURST 0x100 -+#define IPQESS_RFD_BURST 8 -+#define IPQESS_RFD_THR 16 -+#define IPQESS_RFD_LTHR 0 -+ -+/* Flags used in transmit direction */ -+#define IPQESS_DESC_LAST 0x1 -+#define IPQESS_DESC_SINGLE 0x2 -+#define IPQESS_DESC_PAGE 0x4 -+ -+struct ipqess_statistics { -+ u32 tx_q0_pkt; -+ u32 tx_q1_pkt; -+ u32 tx_q2_pkt; -+ u32 tx_q3_pkt; -+ u32 tx_q4_pkt; -+ u32 tx_q5_pkt; -+ u32 tx_q6_pkt; -+ u32 tx_q7_pkt; -+ u32 tx_q8_pkt; -+ u32 tx_q9_pkt; -+ u32 tx_q10_pkt; -+ u32 tx_q11_pkt; -+ u32 tx_q12_pkt; -+ u32 tx_q13_pkt; -+ u32 tx_q14_pkt; -+ u32 tx_q15_pkt; -+ u32 tx_q0_byte; -+ u32 tx_q1_byte; -+ u32 tx_q2_byte; -+ u32 tx_q3_byte; -+ u32 tx_q4_byte; -+ u32 tx_q5_byte; -+ u32 tx_q6_byte; -+ u32 tx_q7_byte; -+ u32 tx_q8_byte; -+ u32 tx_q9_byte; -+ u32 tx_q10_byte; -+ u32 tx_q11_byte; -+ u32 tx_q12_byte; -+ u32 tx_q13_byte; -+ u32 tx_q14_byte; -+ u32 tx_q15_byte; -+ u32 rx_q0_pkt; -+ u32 rx_q1_pkt; -+ u32 rx_q2_pkt; -+ u32 rx_q3_pkt; -+ u32 rx_q4_pkt; -+ u32 rx_q5_pkt; -+ u32 rx_q6_pkt; -+ u32 rx_q7_pkt; -+ u32 rx_q0_byte; -+ u32 rx_q1_byte; -+ u32 rx_q2_byte; -+ u32 rx_q3_byte; -+ u32 rx_q4_byte; -+ u32 rx_q5_byte; -+ u32 rx_q6_byte; -+ u32 rx_q7_byte; -+ u32 tx_desc_error; -+}; -+ -+struct ipqess_tx_desc { -+ __le16 len; -+ __le16 svlan_tag; -+ __le32 word1; -+ __le32 addr; -+ __le32 word3; -+} __aligned(16) __packed; -+ -+struct ipqess_rx_desc { -+ __le16 rrd0; -+ __le16 rrd1; -+ __le16 rrd2; -+ __le16 rrd3; -+ __le16 rrd4; -+ __le16 rrd5; -+ __le16 rrd6; -+ __le16 rrd7; -+} __aligned(16) __packed; -+ -+struct ipqess_buf { -+ struct sk_buff *skb; -+ dma_addr_t dma; -+ u32 flags; -+ u16 length; -+}; -+ -+struct ipqess_tx_ring { -+ struct napi_struct napi_tx; -+ u32 idx; -+ int ring_id; -+ struct ipqess *ess; -+ struct netdev_queue *nq; -+ struct ipqess_tx_desc *hw_desc; -+ struct ipqess_buf *buf; -+ dma_addr_t dma; -+ u16 count; -+ u16 head; -+ u16 tail; -+}; -+ -+struct ipqess_rx_ring { -+ struct napi_struct napi_rx; -+ u32 idx; -+ int ring_id; -+ struct ipqess *ess; -+ struct device *ppdev; -+ struct ipqess_rx_desc **hw_desc; -+ struct ipqess_buf *buf; -+ dma_addr_t dma; -+ u16 head; -+ u16 tail; -+ atomic_t refill_count; -+}; -+ -+struct ipqess_rx_ring_refill { -+ struct ipqess_rx_ring *rx_ring; -+ struct work_struct refill_work; -+}; -+ -+#define IPQESS_IRQ_NAME_LEN 32 -+ -+struct ipqess { -+ struct net_device *netdev; -+ void __iomem *hw_addr; -+ -+ struct clk *ess_clk; -+ struct reset_control *ess_rst; -+ -+ struct ipqess_rx_ring rx_ring[IPQESS_NETDEV_QUEUES]; -+ -+ struct platform_device *pdev; -+ struct phylink *phylink; -+ struct phylink_config phylink_config; -+ struct ipqess_tx_ring tx_ring[IPQESS_NETDEV_QUEUES]; -+ -+ struct ipqess_statistics ipqess_stats; -+ -+ /* Protects stats */ -+ spinlock_t stats_lock; -+ struct net_device_stats stats; -+ -+ struct ipqess_rx_ring_refill rx_refill[IPQESS_NETDEV_QUEUES]; -+ u32 tx_irq[IPQESS_MAX_TX_QUEUE]; -+ char tx_irq_names[IPQESS_MAX_TX_QUEUE][IPQESS_IRQ_NAME_LEN]; -+ u32 rx_irq[IPQESS_MAX_RX_QUEUE]; -+ char rx_irq_names[IPQESS_MAX_TX_QUEUE][IPQESS_IRQ_NAME_LEN]; -+}; -+ -+void ipqess_set_ethtool_ops(struct net_device *netdev); -+void ipqess_update_hw_stats(struct ipqess *ess); -+ -+/* register definition */ -+#define IPQESS_REG_MAS_CTRL 0x0 -+#define IPQESS_REG_TIMEOUT_CTRL 0x004 -+#define IPQESS_REG_DBG0 0x008 -+#define IPQESS_REG_DBG1 0x00C -+#define IPQESS_REG_SW_CTRL0 0x100 -+#define IPQESS_REG_SW_CTRL1 0x104 -+ -+/* Interrupt Status Register */ -+#define IPQESS_REG_RX_ISR 0x200 -+#define IPQESS_REG_TX_ISR 0x208 -+#define IPQESS_REG_MISC_ISR 0x210 -+#define IPQESS_REG_WOL_ISR 0x218 -+ -+#define IPQESS_MISC_ISR_RX_URG_Q(x) (1 << (x)) -+ -+#define IPQESS_MISC_ISR_AXIR_TIMEOUT 0x00000100 -+#define IPQESS_MISC_ISR_AXIR_ERR 0x00000200 -+#define IPQESS_MISC_ISR_TXF_DEAD 0x00000400 -+#define IPQESS_MISC_ISR_AXIW_ERR 0x00000800 -+#define IPQESS_MISC_ISR_AXIW_TIMEOUT 0x00001000 -+ -+#define IPQESS_WOL_ISR 0x00000001 -+ -+/* Interrupt Mask Register */ -+#define IPQESS_REG_MISC_IMR 0x214 -+#define IPQESS_REG_WOL_IMR 0x218 -+ -+#define IPQESS_RX_IMR_NORMAL_MASK 0x1 -+#define IPQESS_TX_IMR_NORMAL_MASK 0x1 -+#define IPQESS_MISC_IMR_NORMAL_MASK 0x80001FFF -+#define IPQESS_WOL_IMR_NORMAL_MASK 0x1 -+ -+/* Edma receive consumer index */ -+#define IPQESS_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */ -+ -+/* Edma transmit consumer index */ -+#define IPQESS_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */ -+ -+/* IRQ Moderator Initial Timer Register */ -+#define IPQESS_REG_IRQ_MODRT_TIMER_INIT 0x280 -+#define IPQESS_IRQ_MODRT_TIMER_MASK 0xFFFF -+#define IPQESS_IRQ_MODRT_RX_TIMER_SHIFT 0 -+#define IPQESS_IRQ_MODRT_TX_TIMER_SHIFT 16 -+ -+/* Interrupt Control Register */ -+#define IPQESS_REG_INTR_CTRL 0x284 -+#define IPQESS_INTR_CLR_TYP_SHIFT 0 -+#define IPQESS_INTR_SW_IDX_W_TYP_SHIFT 1 -+#define IPQESS_INTR_CLEAR_TYPE_W1 0 -+#define IPQESS_INTR_CLEAR_TYPE_R 1 -+ -+/* RX Interrupt Mask Register */ -+#define IPQESS_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */ -+ -+/* TX Interrupt mask register */ -+#define IPQESS_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */ -+ -+/* Load Ptr Register -+ * Software sets this bit after the initialization of the head and tail -+ */ -+#define IPQESS_REG_TX_SRAM_PART 0x400 -+#define IPQESS_LOAD_PTR_SHIFT 16 -+ -+/* TXQ Control Register */ -+#define IPQESS_REG_TXQ_CTRL 0x404 -+#define IPQESS_TXQ_CTRL_IP_OPTION_EN 0x10 -+#define IPQESS_TXQ_CTRL_TXQ_EN 0x20 -+#define IPQESS_TXQ_CTRL_ENH_MODE 0x40 -+#define IPQESS_TXQ_CTRL_LS_8023_EN 0x80 -+#define IPQESS_TXQ_CTRL_TPD_BURST_EN 0x100 -+#define IPQESS_TXQ_CTRL_LSO_BREAK_EN 0x200 -+#define IPQESS_TXQ_NUM_TPD_BURST_MASK 0xF -+#define IPQESS_TXQ_TXF_BURST_NUM_MASK 0xFFFF -+#define IPQESS_TXQ_NUM_TPD_BURST_SHIFT 0 -+#define IPQESS_TXQ_TXF_BURST_NUM_SHIFT 16 -+ -+#define IPQESS_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */ -+#define IPQESS_TXF_WATER_MARK_MASK 0x0FFF -+#define IPQESS_TXF_LOW_WATER_MARK_SHIFT 0 -+#define IPQESS_TXF_HIGH_WATER_MARK_SHIFT 16 -+#define IPQESS_TXQ_CTRL_BURST_MODE_EN 0x80000000 -+ -+/* WRR Control Register */ -+#define IPQESS_REG_WRR_CTRL_Q0_Q3 0x40c -+#define IPQESS_REG_WRR_CTRL_Q4_Q7 0x410 -+#define IPQESS_REG_WRR_CTRL_Q8_Q11 0x414 -+#define IPQESS_REG_WRR_CTRL_Q12_Q15 0x418 -+ -+/* Weight round robin(WRR), it takes queue as input, and computes -+ * starting bits where we need to write the weight for a particular -+ * queue -+ */ -+#define IPQESS_WRR_SHIFT(x) (((x) * 5) % 20) -+ -+/* Tx Descriptor Control Register */ -+#define IPQESS_REG_TPD_RING_SIZE 0x41C -+#define IPQESS_TPD_RING_SIZE_SHIFT 0 -+#define IPQESS_TPD_RING_SIZE_MASK 0xFFFF -+ -+/* Transmit descriptor base address */ -+#define IPQESS_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */ -+ -+/* TPD Index Register */ -+#define IPQESS_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */ -+ -+#define IPQESS_TPD_PROD_IDX_BITS 0x0000FFFF -+#define IPQESS_TPD_CONS_IDX_BITS 0xFFFF0000 -+#define IPQESS_TPD_PROD_IDX_MASK 0xFFFF -+#define IPQESS_TPD_CONS_IDX_MASK 0xFFFF -+#define IPQESS_TPD_PROD_IDX_SHIFT 0 -+#define IPQESS_TPD_CONS_IDX_SHIFT 16 -+ -+/* TX Virtual Queue Mapping Control Register */ -+#define IPQESS_REG_VQ_CTRL0 0x4A0 -+#define IPQESS_REG_VQ_CTRL1 0x4A4 -+ -+/* Virtual QID shift, it takes queue as input, and computes -+ * Virtual QID position in virtual qid control register -+ */ -+#define IPQESS_VQ_ID_SHIFT(i) (((i) * 3) % 24) -+ -+/* Virtual Queue Default Value */ -+#define IPQESS_VQ_REG_VALUE 0x240240 -+ -+/* Tx side Port Interface Control Register */ -+#define IPQESS_REG_PORT_CTRL 0x4A8 -+#define IPQESS_PAD_EN_SHIFT 15 -+ -+/* Tx side VLAN Configuration Register */ -+#define IPQESS_REG_VLAN_CFG 0x4AC -+ -+#define IPQESS_VLAN_CFG_SVLAN_TPID_SHIFT 0 -+#define IPQESS_VLAN_CFG_SVLAN_TPID_MASK 0xffff -+#define IPQESS_VLAN_CFG_CVLAN_TPID_SHIFT 16 -+#define IPQESS_VLAN_CFG_CVLAN_TPID_MASK 0xffff -+ -+#define IPQESS_TX_CVLAN 16 -+#define IPQESS_TX_INS_CVLAN 17 -+#define IPQESS_TX_CVLAN_TAG_SHIFT 0 -+ -+#define IPQESS_TX_SVLAN 14 -+#define IPQESS_TX_INS_SVLAN 15 -+#define IPQESS_TX_SVLAN_TAG_SHIFT 16 -+ -+/* Tx Queue Packet Statistic Register */ -+#define IPQESS_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */ -+ -+#define IPQESS_TX_STAT_PKT_MASK 0xFFFFFF -+ -+/* Tx Queue Byte Statistic Register */ -+#define IPQESS_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */ -+ -+/* Load Balance Based Ring Offset Register */ -+#define IPQESS_REG_LB_RING 0x800 -+#define IPQESS_LB_RING_ENTRY_MASK 0xff -+#define IPQESS_LB_RING_ID_MASK 0x7 -+#define IPQESS_LB_RING_PROFILE_ID_MASK 0x3 -+#define IPQESS_LB_RING_ENTRY_BIT_OFFSET 8 -+#define IPQESS_LB_RING_ID_OFFSET 0 -+#define IPQESS_LB_RING_PROFILE_ID_OFFSET 3 -+#define IPQESS_LB_REG_VALUE 0x6040200 -+ -+/* Load Balance Priority Mapping Register */ -+#define IPQESS_REG_LB_PRI_START 0x804 -+#define IPQESS_REG_LB_PRI_END 0x810 -+#define IPQESS_LB_PRI_REG_INC 4 -+#define IPQESS_LB_PRI_ENTRY_BIT_OFFSET 4 -+#define IPQESS_LB_PRI_ENTRY_MASK 0xf -+ -+/* RSS Priority Mapping Register */ -+#define IPQESS_REG_RSS_PRI 0x820 -+#define IPQESS_RSS_PRI_ENTRY_MASK 0xf -+#define IPQESS_RSS_RING_ID_MASK 0x7 -+#define IPQESS_RSS_PRI_ENTRY_BIT_OFFSET 4 -+ -+/* RSS Indirection Register */ -+#define IPQESS_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */ -+#define IPQESS_NUM_IDT 16 -+#define IPQESS_RSS_IDT_VALUE 0x64206420 -+ -+/* Default RSS Ring Register */ -+#define IPQESS_REG_DEF_RSS 0x890 -+#define IPQESS_DEF_RSS_MASK 0x7 -+ -+/* RSS Hash Function Type Register */ -+#define IPQESS_REG_RSS_TYPE 0x894 -+#define IPQESS_RSS_TYPE_NONE 0x01 -+#define IPQESS_RSS_TYPE_IPV4TCP 0x02 -+#define IPQESS_RSS_TYPE_IPV6_TCP 0x04 -+#define IPQESS_RSS_TYPE_IPV4_UDP 0x08 -+#define IPQESS_RSS_TYPE_IPV6UDP 0x10 -+#define IPQESS_RSS_TYPE_IPV4 0x20 -+#define IPQESS_RSS_TYPE_IPV6 0x40 -+#define IPQESS_RSS_HASH_MODE_MASK 0x7f -+ -+#define IPQESS_REG_RSS_HASH_VALUE 0x8C0 -+ -+#define IPQESS_REG_RSS_TYPE_RESULT 0x8C4 -+ -+#define IPQESS_HASH_TYPE_START 0 -+#define IPQESS_HASH_TYPE_END 5 -+#define IPQESS_HASH_TYPE_SHIFT 12 -+ -+#define IPQESS_RFS_FLOW_ENTRIES 1024 -+#define IPQESS_RFS_FLOW_ENTRIES_MASK (IPQESS_RFS_FLOW_ENTRIES - 1) -+#define IPQESS_RFS_EXPIRE_COUNT_PER_CALL 128 -+ -+/* RFD Base Address Register */ -+#define IPQESS_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */ -+ -+/* RFD Index Register */ -+#define IPQESS_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) /* x = queue id */ -+ -+#define IPQESS_RFD_PROD_IDX_BITS 0x00000FFF -+#define IPQESS_RFD_CONS_IDX_BITS 0x0FFF0000 -+#define IPQESS_RFD_PROD_IDX_MASK 0xFFF -+#define IPQESS_RFD_CONS_IDX_MASK 0xFFF -+#define IPQESS_RFD_PROD_IDX_SHIFT 0 -+#define IPQESS_RFD_CONS_IDX_SHIFT 16 -+ -+/* Rx Descriptor Control Register */ -+#define IPQESS_REG_RX_DESC0 0xA10 -+#define IPQESS_RFD_RING_SIZE_MASK 0xFFF -+#define IPQESS_RX_BUF_SIZE_MASK 0xFFFF -+#define IPQESS_RFD_RING_SIZE_SHIFT 0 -+#define IPQESS_RX_BUF_SIZE_SHIFT 16 -+ -+#define IPQESS_REG_RX_DESC1 0xA14 -+#define IPQESS_RXQ_RFD_BURST_NUM_MASK 0x3F -+#define IPQESS_RXQ_RFD_PF_THRESH_MASK 0x1F -+#define IPQESS_RXQ_RFD_LOW_THRESH_MASK 0xFFF -+#define IPQESS_RXQ_RFD_BURST_NUM_SHIFT 0 -+#define IPQESS_RXQ_RFD_PF_THRESH_SHIFT 8 -+#define IPQESS_RXQ_RFD_LOW_THRESH_SHIFT 16 -+ -+/* RXQ Control Register */ -+#define IPQESS_REG_RXQ_CTRL 0xA18 -+#define IPQESS_FIFO_THRESH_TYPE_SHIF 0 -+#define IPQESS_FIFO_THRESH_128_BYTE 0x0 -+#define IPQESS_FIFO_THRESH_64_BYTE 0x1 -+#define IPQESS_RXQ_CTRL_RMV_VLAN 0x00000002 -+#define IPQESS_RXQ_CTRL_EN_MASK GENMASK(15, 8) -+#define IPQESS_RXQ_CTRL_EN(__qid) BIT(8 + (__qid)) -+ -+/* AXI Burst Size Config */ -+#define IPQESS_REG_AXIW_CTRL_MAXWRSIZE 0xA1C -+#define IPQESS_AXIW_MAXWRSIZE_VALUE 0x0 -+ -+/* Rx Statistics Register */ -+#define IPQESS_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */ -+#define IPQESS_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */ -+ -+/* WoL Pattern Length Register */ -+#define IPQESS_REG_WOL_PATTERN_LEN0 0xC00 -+#define IPQESS_WOL_PT_LEN_MASK 0xFF -+#define IPQESS_WOL_PT0_LEN_SHIFT 0 -+#define IPQESS_WOL_PT1_LEN_SHIFT 8 -+#define IPQESS_WOL_PT2_LEN_SHIFT 16 -+#define IPQESS_WOL_PT3_LEN_SHIFT 24 -+ -+#define IPQESS_REG_WOL_PATTERN_LEN1 0xC04 -+#define IPQESS_WOL_PT4_LEN_SHIFT 0 -+#define IPQESS_WOL_PT5_LEN_SHIFT 8 -+#define IPQESS_WOL_PT6_LEN_SHIFT 16 -+ -+/* WoL Control Register */ -+#define IPQESS_REG_WOL_CTRL 0xC08 -+#define IPQESS_WOL_WK_EN 0x00000001 -+#define IPQESS_WOL_MG_EN 0x00000002 -+#define IPQESS_WOL_PT0_EN 0x00000004 -+#define IPQESS_WOL_PT1_EN 0x00000008 -+#define IPQESS_WOL_PT2_EN 0x00000010 -+#define IPQESS_WOL_PT3_EN 0x00000020 -+#define IPQESS_WOL_PT4_EN 0x00000040 -+#define IPQESS_WOL_PT5_EN 0x00000080 -+#define IPQESS_WOL_PT6_EN 0x00000100 -+ -+/* MAC Control Register */ -+#define IPQESS_REG_MAC_CTRL0 0xC20 -+#define IPQESS_REG_MAC_CTRL1 0xC24 -+ -+/* WoL Pattern Register */ -+#define IPQESS_REG_WOL_PATTERN_START 0x5000 -+#define IPQESS_PATTERN_PART_REG_OFFSET 0x40 -+ -+/* TX descriptor fields */ -+#define IPQESS_TPD_HDR_SHIFT 0 -+#define IPQESS_TPD_PPPOE_EN 0x00000100 -+#define IPQESS_TPD_IP_CSUM_EN 0x00000200 -+#define IPQESS_TPD_TCP_CSUM_EN 0x0000400 -+#define IPQESS_TPD_UDP_CSUM_EN 0x00000800 -+#define IPQESS_TPD_CUSTOM_CSUM_EN 0x00000C00 -+#define IPQESS_TPD_LSO_EN 0x00001000 -+#define IPQESS_TPD_LSO_V2_EN 0x00002000 -+/* The VLAN_TAGGED bit is not used in the publicly available -+ * drivers. The definition has been stolen from the Atheros -+ * 'alx' driver (drivers/net/ethernet/atheros/alx/hw.h). It -+ * seems that it has the same meaning in regard to the EDMA -+ * hardware. -+ */ -+#define IPQESS_TPD_VLAN_TAGGED 0x00004000 -+#define IPQESS_TPD_IPV4_EN 0x00010000 -+#define IPQESS_TPD_MSS_MASK 0x1FFF -+#define IPQESS_TPD_MSS_SHIFT 18 -+#define IPQESS_TPD_CUSTOM_CSUM_SHIFT 18 -+ -+/* RRD descriptor fields */ -+#define IPQESS_RRD_NUM_RFD_MASK 0x000F -+#define IPQESS_RRD_PKT_SIZE_MASK 0x3FFF -+#define IPQESS_RRD_SRC_PORT_NUM_MASK 0x4000 -+#define IPQESS_RRD_SVLAN 0x8000 -+#define IPQESS_RRD_FLOW_COOKIE_MASK 0x07FF -+ -+#define IPQESS_RRD_PKT_SIZE_MASK 0x3FFF -+#define IPQESS_RRD_CSUM_FAIL_MASK 0xC000 -+#define IPQESS_RRD_CVLAN 0x0001 -+#define IPQESS_RRD_DESC_VALID 0x8000 -+ -+#define IPQESS_RRD_PRIORITY_SHIFT 4 -+#define IPQESS_RRD_PRIORITY_MASK 0x7 -+#define IPQESS_RRD_PORT_TYPE_SHIFT 7 -+#define IPQESS_RRD_PORT_TYPE_MASK 0x1F -+ -+#define IPQESS_RRD_PORT_ID_MASK 0x7000 -+ -+#endif ---- /dev/null -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c -@@ -0,0 +1,164 @@ -+// SPDX-License-Identifier: GPL-2.0 OR ISC -+/* Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. -+ * Copyright (c) 2017 - 2018, John Crispin <john@phrozen.org> -+ * Copyright (c) 2021 - 2022, Maxime Chevallier <maxime.chevallier@bootlin.com> -+ * -+ */ -+ -+#include <linux/ethtool.h> -+#include <linux/netdevice.h> -+#include <linux/string.h> -+#include <linux/phylink.h> -+ -+#include "ipqess.h" -+ -+struct ipqess_ethtool_stats { -+ u8 string[ETH_GSTRING_LEN]; -+ u32 offset; -+}; -+ -+#define IPQESS_STAT(m) offsetof(struct ipqess_statistics, m) -+#define DRVINFO_LEN 32 -+ -+static const struct ipqess_ethtool_stats ipqess_stats[] = { -+ {"tx_q0_pkt", IPQESS_STAT(tx_q0_pkt)}, -+ {"tx_q1_pkt", IPQESS_STAT(tx_q1_pkt)}, -+ {"tx_q2_pkt", IPQESS_STAT(tx_q2_pkt)}, -+ {"tx_q3_pkt", IPQESS_STAT(tx_q3_pkt)}, -+ {"tx_q4_pkt", IPQESS_STAT(tx_q4_pkt)}, -+ {"tx_q5_pkt", IPQESS_STAT(tx_q5_pkt)}, -+ {"tx_q6_pkt", IPQESS_STAT(tx_q6_pkt)}, -+ {"tx_q7_pkt", IPQESS_STAT(tx_q7_pkt)}, -+ {"tx_q8_pkt", IPQESS_STAT(tx_q8_pkt)}, -+ {"tx_q9_pkt", IPQESS_STAT(tx_q9_pkt)}, -+ {"tx_q10_pkt", IPQESS_STAT(tx_q10_pkt)}, -+ {"tx_q11_pkt", IPQESS_STAT(tx_q11_pkt)}, -+ {"tx_q12_pkt", IPQESS_STAT(tx_q12_pkt)}, -+ {"tx_q13_pkt", IPQESS_STAT(tx_q13_pkt)}, -+ {"tx_q14_pkt", IPQESS_STAT(tx_q14_pkt)}, -+ {"tx_q15_pkt", IPQESS_STAT(tx_q15_pkt)}, -+ {"tx_q0_byte", IPQESS_STAT(tx_q0_byte)}, -+ {"tx_q1_byte", IPQESS_STAT(tx_q1_byte)}, -+ {"tx_q2_byte", IPQESS_STAT(tx_q2_byte)}, -+ {"tx_q3_byte", IPQESS_STAT(tx_q3_byte)}, -+ {"tx_q4_byte", IPQESS_STAT(tx_q4_byte)}, -+ {"tx_q5_byte", IPQESS_STAT(tx_q5_byte)}, -+ {"tx_q6_byte", IPQESS_STAT(tx_q6_byte)}, -+ {"tx_q7_byte", IPQESS_STAT(tx_q7_byte)}, -+ {"tx_q8_byte", IPQESS_STAT(tx_q8_byte)}, -+ {"tx_q9_byte", IPQESS_STAT(tx_q9_byte)}, -+ {"tx_q10_byte", IPQESS_STAT(tx_q10_byte)}, -+ {"tx_q11_byte", IPQESS_STAT(tx_q11_byte)}, -+ {"tx_q12_byte", IPQESS_STAT(tx_q12_byte)}, -+ {"tx_q13_byte", IPQESS_STAT(tx_q13_byte)}, -+ {"tx_q14_byte", IPQESS_STAT(tx_q14_byte)}, -+ {"tx_q15_byte", IPQESS_STAT(tx_q15_byte)}, -+ {"rx_q0_pkt", IPQESS_STAT(rx_q0_pkt)}, -+ {"rx_q1_pkt", IPQESS_STAT(rx_q1_pkt)}, -+ {"rx_q2_pkt", IPQESS_STAT(rx_q2_pkt)}, -+ {"rx_q3_pkt", IPQESS_STAT(rx_q3_pkt)}, -+ {"rx_q4_pkt", IPQESS_STAT(rx_q4_pkt)}, -+ {"rx_q5_pkt", IPQESS_STAT(rx_q5_pkt)}, -+ {"rx_q6_pkt", IPQESS_STAT(rx_q6_pkt)}, -+ {"rx_q7_pkt", IPQESS_STAT(rx_q7_pkt)}, -+ {"rx_q0_byte", IPQESS_STAT(rx_q0_byte)}, -+ {"rx_q1_byte", IPQESS_STAT(rx_q1_byte)}, -+ {"rx_q2_byte", IPQESS_STAT(rx_q2_byte)}, -+ {"rx_q3_byte", IPQESS_STAT(rx_q3_byte)}, -+ {"rx_q4_byte", IPQESS_STAT(rx_q4_byte)}, -+ {"rx_q5_byte", IPQESS_STAT(rx_q5_byte)}, -+ {"rx_q6_byte", IPQESS_STAT(rx_q6_byte)}, -+ {"rx_q7_byte", IPQESS_STAT(rx_q7_byte)}, -+ {"tx_desc_error", IPQESS_STAT(tx_desc_error)}, -+}; -+ -+static int ipqess_get_strset_count(struct net_device *netdev, int sset) -+{ -+ switch (sset) { -+ case ETH_SS_STATS: -+ return ARRAY_SIZE(ipqess_stats); -+ default: -+ netdev_dbg(netdev, "%s: Unsupported string set", __func__); -+ return -EOPNOTSUPP; -+ } -+} -+ -+static void ipqess_get_strings(struct net_device *netdev, u32 stringset, -+ u8 *data) -+{ -+ u8 *p = data; -+ u32 i; -+ -+ switch (stringset) { -+ case ETH_SS_STATS: -+ for (i = 0; i < ARRAY_SIZE(ipqess_stats); i++) -+ ethtool_puts(&p, ipqess_stats[i].string); -+ break; -+ } -+} -+ -+static void ipqess_get_ethtool_stats(struct net_device *netdev, -+ struct ethtool_stats *stats, -+ uint64_t *data) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ u32 *essstats = (u32 *)&ess->ipqess_stats; -+ int i; -+ -+ spin_lock(&ess->stats_lock); -+ -+ ipqess_update_hw_stats(ess); -+ -+ for (i = 0; i < ARRAY_SIZE(ipqess_stats); i++) -+ data[i] = *(u32 *)(essstats + (ipqess_stats[i].offset / sizeof(u32))); -+ -+ spin_unlock(&ess->stats_lock); -+} -+ -+static void ipqess_get_drvinfo(struct net_device *dev, -+ struct ethtool_drvinfo *info) -+{ -+ strscpy(info->driver, "qca_ipqess", DRVINFO_LEN); -+ strscpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN); -+} -+ -+static int ipqess_get_link_ksettings(struct net_device *netdev, -+ struct ethtool_link_ksettings *cmd) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ -+ return phylink_ethtool_ksettings_get(ess->phylink, cmd); -+} -+ -+static int ipqess_set_link_ksettings(struct net_device *netdev, -+ const struct ethtool_link_ksettings *cmd) -+{ -+ struct ipqess *ess = netdev_priv(netdev); -+ -+ return phylink_ethtool_ksettings_set(ess->phylink, cmd); -+} -+ -+static void ipqess_get_ringparam(struct net_device *netdev, -+ struct ethtool_ringparam *ring, -+ struct kernel_ethtool_ringparam *kernel_ering, -+ struct netlink_ext_ack *extack) -+{ -+ ring->tx_max_pending = IPQESS_TX_RING_SIZE; -+ ring->rx_max_pending = IPQESS_RX_RING_SIZE; -+} -+ -+static const struct ethtool_ops ipqesstool_ops = { -+ .get_drvinfo = &ipqess_get_drvinfo, -+ .get_link = ðtool_op_get_link, -+ .get_link_ksettings = &ipqess_get_link_ksettings, -+ .set_link_ksettings = &ipqess_set_link_ksettings, -+ .get_strings = &ipqess_get_strings, -+ .get_sset_count = &ipqess_get_strset_count, -+ .get_ethtool_stats = &ipqess_get_ethtool_stats, -+ .get_ringparam = ipqess_get_ringparam, -+}; -+ -+void ipqess_set_ethtool_ops(struct net_device *netdev) -+{ -+ netdev->ethtool_ops = &ipqesstool_ops; -+} diff --git a/target/linux/ipq40xx/patches-6.1/701-net-dsa-add-out-of-band-tagging-protocol.patch b/target/linux/ipq40xx/patches-6.1/701-net-dsa-add-out-of-band-tagging-protocol.patch deleted file mode 100644 index 1723f2c749..0000000000 --- a/target/linux/ipq40xx/patches-6.1/701-net-dsa-add-out-of-band-tagging-protocol.patch +++ /dev/null @@ -1,238 +0,0 @@ -From a32e16b3c2fc1954ad6e09737439f60e5890278e Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier <maxime.chevallier@bootlin.com> -Date: Fri, 4 Nov 2022 18:41:49 +0100 -Subject: [PATCH] net: dsa: add out-of-band tagging protocol - -This tagging protocol is designed for the situation where the link -between the MAC and the Switch is designed such that the Destination -Port, which is usually embedded in some part of the Ethernet Header, is -sent out-of-band, and isn't present at all in the Ethernet frame. - -This can happen when the MAC and Switch are tightly integrated on an -SoC, as is the case with the Qualcomm IPQ4019 for example, where the DSA -tag is inserted directly into the DMA descriptors. In that case, -the MAC driver is responsible for sending the tag to the switch using -the out-of-band medium. To do so, the MAC driver needs to have the -information of the destination port for that skb. - -Add a new tagging protocol based on SKB extensions to convey the -information about the destination port to the MAC driver - -Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> ---- - Documentation/networking/dsa/dsa.rst | 13 +++++++- - MAINTAINERS | 1 + - include/linux/dsa/oob.h | 16 +++++++++ - include/linux/skbuff.h | 3 ++ - include/net/dsa.h | 2 ++ - net/core/skbuff.c | 10 ++++++ - net/dsa/Kconfig | 9 +++++ - net/dsa/Makefile | 1 + - net/dsa/tag_oob.c | 49 ++++++++++++++++++++++++++++ - 9 files changed, 103 insertions(+), 1 deletion(-) - create mode 100644 include/linux/dsa/oob.h - create mode 100644 net/dsa/tag_oob.c - ---- a/Documentation/networking/dsa/dsa.rst -+++ b/Documentation/networking/dsa/dsa.rst -@@ -66,7 +66,8 @@ Switch tagging protocols - ------------------------ - - DSA supports many vendor-specific tagging protocols, one software-defined --tagging protocol, and a tag-less mode as well (``DSA_TAG_PROTO_NONE``). -+tagging protocol, a tag-less mode as well (``DSA_TAG_PROTO_NONE``) and an -+out-of-band tagging protocol (``DSA_TAG_PROTO_OOB``). - - The exact format of the tag protocol is vendor specific, but in general, they - all contain something which: -@@ -217,6 +218,16 @@ receive all frames regardless of the val - setting the ``promisc_on_master`` property of the ``struct dsa_device_ops``. - Note that this assumes a DSA-unaware master driver, which is the norm. - -+Some SoCs have a tight integration between the conduit network interface and the -+embedded switch, such that the DSA tag isn't transmitted in the packet data, -+but through another media, using so-called out-of-band tagging. In that case, -+the host MAC driver is in charge of transmitting the tag to the switch. -+An example is the IPQ4019 SoC, that transmits the tag between the ipqess -+ethernet controller and the qca8k switch using the DMA descriptor. In that -+configuration, tag-chaining is permitted, but the OOB tag will always be the -+top-most switch in the tree. The tagger (``DSA_TAG_PROTO_OOB``) uses skb -+extensions to transmit the tag to and from the MAC driver. -+ - Master network devices - ---------------------- - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -17081,6 +17081,7 @@ L: netdev@vger.kernel.org - S: Maintained - F: Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml - F: drivers/net/ethernet/qualcomm/ipqess/ -+F: net/dsa/tag_oob.c - - QUALCOMM ETHQOS ETHERNET DRIVER - M: Vinod Koul <vkoul@kernel.org> ---- /dev/null -+++ b/include/linux/dsa/oob.h -@@ -0,0 +1,16 @@ -+/* SPDX-License-Identifier: GPL-2.0-only -+ * Copyright (C) 2022 Maxime Chevallier <maxime.chevallier@bootlin.com> -+ */ -+ -+#ifndef _NET_DSA_OOB_H -+#define _NET_DSA_OOB_H -+ -+#include <linux/skbuff.h> -+ -+struct dsa_oob_tag_info { -+ u16 port; -+}; -+ -+int dsa_oob_tag_push(struct sk_buff *skb, struct dsa_oob_tag_info *ti); -+int dsa_oob_tag_pop(struct sk_buff *skb, struct dsa_oob_tag_info *ti); -+#endif ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -4594,6 +4594,9 @@ enum skb_ext_id { - #if IS_ENABLED(CONFIG_MCTP_FLOWS) - SKB_EXT_MCTP, - #endif -+#if IS_ENABLED(CONFIG_NET_DSA_TAG_OOB) -+ SKB_EXT_DSA_OOB, -+#endif - SKB_EXT_NUM, /* must be last */ - }; - ---- a/include/net/dsa.h -+++ b/include/net/dsa.h -@@ -55,6 +55,7 @@ struct phylink_link_state; - #define DSA_TAG_PROTO_RTL8_4T_VALUE 25 - #define DSA_TAG_PROTO_RZN1_A5PSW_VALUE 26 - #define DSA_TAG_PROTO_LAN937X_VALUE 27 -+#define DSA_TAG_PROTO_OOB_VALUE 28 - - enum dsa_tag_protocol { - DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, -@@ -85,6 +86,7 @@ enum dsa_tag_protocol { - DSA_TAG_PROTO_RTL8_4T = DSA_TAG_PROTO_RTL8_4T_VALUE, - DSA_TAG_PROTO_RZN1_A5PSW = DSA_TAG_PROTO_RZN1_A5PSW_VALUE, - DSA_TAG_PROTO_LAN937X = DSA_TAG_PROTO_LAN937X_VALUE, -+ DSA_TAG_PROTO_OOB = DSA_TAG_PROTO_OOB_VALUE, - }; - - struct dsa_switch; ---- a/net/core/skbuff.c -+++ b/net/core/skbuff.c -@@ -62,8 +62,12 @@ - #include <linux/mpls.h> - #include <linux/kcov.h> - #include <linux/if.h> -+#ifdef CONFIG_NET_DSA_TAG_OOB -+#include <linux/dsa/oob.h> -+#endif - - #include <net/protocol.h> -+#include <net/dsa.h> - #include <net/dst.h> - #include <net/sock.h> - #include <net/checksum.h> -@@ -4517,6 +4521,9 @@ static const u8 skb_ext_type_len[] = { - #if IS_ENABLED(CONFIG_MCTP_FLOWS) - [SKB_EXT_MCTP] = SKB_EXT_CHUNKSIZEOF(struct mctp_flow), - #endif -+#if IS_ENABLED(CONFIG_NET_DSA_TAG_OOB) -+ [SKB_EXT_DSA_OOB] = SKB_EXT_CHUNKSIZEOF(struct dsa_oob_tag_info), -+#endif - }; - - static __always_inline unsigned int skb_ext_total_length(void) -@@ -4537,6 +4544,9 @@ static __always_inline unsigned int skb_ - #if IS_ENABLED(CONFIG_MCTP_FLOWS) - skb_ext_type_len[SKB_EXT_MCTP] + - #endif -+#if IS_ENABLED(CONFIG_NET_DSA_TAG_OOB) -+ skb_ext_type_len[SKB_EXT_DSA_OOB] + -+#endif - 0; - } - ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -113,6 +113,15 @@ config NET_DSA_TAG_OCELOT_8021Q - this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for - use with tc-flower. - -+config NET_DSA_TAG_OOB -+ select SKB_EXTENSIONS -+ tristate "Tag driver for Out-of-band tagging drivers" -+ help -+ Say Y or M if you want to enable support for pairs of embedded -+ switches and host MAC drivers which perform demultiplexing and -+ packet steering to ports using out of band metadata processed -+ by the DSA master, rather than tags present in the packets. -+ - config NET_DSA_TAG_QCA - tristate "Tag driver for Qualcomm Atheros QCA8K switches" - help ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag - obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o - obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o - obj-$(CONFIG_NET_DSA_TAG_OCELOT_8021Q) += tag_ocelot_8021q.o -+obj-$(CONFIG_NET_DSA_TAG_OOB) += tag_oob.o - obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o - obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o - obj-$(CONFIG_NET_DSA_TAG_RTL8_4) += tag_rtl8_4.o ---- /dev/null -+++ b/net/dsa/tag_oob.c -@@ -0,0 +1,49 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+/* Copyright (c) 2022, Maxime Chevallier <maxime.chevallier@bootlin.com> */ -+ -+#include <linux/bitfield.h> -+#include <linux/dsa/oob.h> -+#include <linux/skbuff.h> -+ -+#include "dsa_priv.h" -+ -+static struct sk_buff *oob_tag_xmit(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct dsa_oob_tag_info *tag_info = skb_ext_add(skb, SKB_EXT_DSA_OOB); -+ struct dsa_port *dp = dsa_slave_to_port(dev); -+ -+ tag_info->port = dp->index; -+ -+ return skb; -+} -+ -+static struct sk_buff *oob_tag_rcv(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct dsa_oob_tag_info *tag_info = skb_ext_find(skb, SKB_EXT_DSA_OOB); -+ -+ if (!tag_info) -+ return NULL; -+ -+ skb->dev = dsa_master_find_slave(dev, 0, tag_info->port); -+ if (!skb->dev) -+ return NULL; -+ -+ return skb; -+} -+ -+static const struct dsa_device_ops oob_tag_dsa_ops = { -+ .name = "oob", -+ .proto = DSA_TAG_PROTO_OOB, -+ .xmit = oob_tag_xmit, -+ .rcv = oob_tag_rcv, -+}; -+ -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("DSA tag driver for out-of-band tagging"); -+MODULE_AUTHOR("Maxime Chevallier <maxime.chevallier@bootlin.com>"); -+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_OOB); -+ -+module_dsa_tag_driver(oob_tag_dsa_ops); diff --git a/target/linux/ipq40xx/patches-6.1/702-net-ipqess-Add-out-of-band-DSA-tagging-support.patch b/target/linux/ipq40xx/patches-6.1/702-net-ipqess-Add-out-of-band-DSA-tagging-support.patch deleted file mode 100644 index ac0718ba2c..0000000000 --- a/target/linux/ipq40xx/patches-6.1/702-net-ipqess-Add-out-of-band-DSA-tagging-support.patch +++ /dev/null @@ -1,173 +0,0 @@ -From 4975e2b3f1d37bba04f262784cef0d5b7e0a30a4 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier <maxime.chevallier@bootlin.com> -Date: Fri, 4 Nov 2022 18:41:50 +0100 -Subject: [PATCH] net: ipqess: Add out-of-band DSA tagging support - -On the IPQ4019, there's an 5 ports switch connected to the CPU through -the IPQESS Ethernet controller. The way the DSA tag is sent-out to that -switch is through the DMA descriptor, due to how tightly it is -integrated with the switch. - -We use the out-of-band tagging protocol by getting the source -port from the descriptor, push it into the skb extensions, and have the -tagger pull it to infer the destination netdev. The reverse process is -done on the TX side, where the driver pulls the tag from the skb and -builds the descriptor accordingly. - -Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> ---- - drivers/net/ethernet/qualcomm/Kconfig | 1 + - drivers/net/ethernet/qualcomm/ipqess/ipqess.c | 64 ++++++++++++++++++- - drivers/net/ethernet/qualcomm/ipqess/ipqess.h | 4 ++ - 3 files changed, 68 insertions(+), 1 deletion(-) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -64,6 +64,7 @@ config QCOM_IPQ4019_ESS_EDMA - tristate "Qualcomm Atheros IPQ4019 ESS EDMA support" - depends on (OF && ARCH_QCOM) || COMPILE_TEST - select PHYLINK -+ select NET_DSA_TAG_OOB - help - This driver supports the Qualcomm Atheros IPQ40xx built-in - ESS EDMA ethernet controller. ---- a/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -@@ -9,6 +9,7 @@ - - #include <linux/bitfield.h> - #include <linux/clk.h> -+#include <linux/dsa/oob.h> - #include <linux/if_vlan.h> - #include <linux/interrupt.h> - #include <linux/module.h> -@@ -22,6 +23,7 @@ - #include <linux/skbuff.h> - #include <linux/vmalloc.h> - #include <net/checksum.h> -+#include <net/dsa.h> - #include <net/ip6_checksum.h> - - #include "ipqess.h" -@@ -327,6 +329,7 @@ static int ipqess_rx_poll(struct ipqess_ - tail &= IPQESS_RFD_CONS_IDX_MASK; - - while (done < budget) { -+ struct dsa_oob_tag_info *tag_info; - struct ipqess_rx_desc *rd; - struct sk_buff *skb; - -@@ -406,6 +409,12 @@ static int ipqess_rx_poll(struct ipqess_ - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), - le16_to_cpu(rd->rrd4)); - -+ if (likely(rx_ring->ess->dsa_ports)) { -+ tag_info = skb_ext_add(skb, SKB_EXT_DSA_OOB); -+ tag_info->port = FIELD_GET(IPQESS_RRD_PORT_ID_MASK, -+ le16_to_cpu(rd->rrd1)); -+ } -+ - napi_gro_receive(&rx_ring->napi_rx, skb); - - rx_ring->ess->stats.rx_packets++; -@@ -706,6 +715,23 @@ static void ipqess_rollback_tx(struct ip - tx_ring->head = start_index; - } - -+static void ipqess_process_dsa_tag_sh(struct ipqess *ess, struct sk_buff *skb, -+ u32 *word3) -+{ -+ struct dsa_oob_tag_info *tag_info; -+ -+ if (unlikely(!ess->dsa_ports)) -+ return; -+ -+ tag_info = skb_ext_find(skb, SKB_EXT_DSA_OOB); -+ if (!tag_info) -+ return; -+ -+ *word3 |= tag_info->port << IPQESS_TPD_PORT_BITMAP_SHIFT; -+ *word3 |= BIT(IPQESS_TPD_FROM_CPU_SHIFT); -+ *word3 |= 0x3e << IPQESS_TPD_PORT_BITMAP_SHIFT; -+} -+ - static int ipqess_tx_map_and_fill(struct ipqess_tx_ring *tx_ring, - struct sk_buff *skb) - { -@@ -716,6 +742,8 @@ static int ipqess_tx_map_and_fill(struct - u16 len; - int i; - -+ ipqess_process_dsa_tag_sh(tx_ring->ess, skb, &word3); -+ - if (skb_is_gso(skb)) { - if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { - lso_word1 |= IPQESS_TPD_IPV4_EN; -@@ -917,6 +945,33 @@ static const struct net_device_ops ipqes - .ndo_tx_timeout = ipqess_tx_timeout, - }; - -+static int ipqess_netdevice_event(struct notifier_block *nb, -+ unsigned long event, void *ptr) -+{ -+ struct ipqess *ess = container_of(nb, struct ipqess, netdev_notifier); -+ struct net_device *dev = netdev_notifier_info_to_dev(ptr); -+ struct netdev_notifier_changeupper_info *info; -+ -+ if (dev != ess->netdev) -+ return NOTIFY_DONE; -+ -+ switch (event) { -+ case NETDEV_CHANGEUPPER: -+ info = ptr; -+ -+ if (!dsa_slave_dev_check(info->upper_dev)) -+ return NOTIFY_DONE; -+ -+ if (info->linking) -+ ess->dsa_ports++; -+ else -+ ess->dsa_ports--; -+ -+ return NOTIFY_DONE; -+ } -+ return NOTIFY_OK; -+} -+ - static void ipqess_hw_stop(struct ipqess *ess) - { - int i; -@@ -1184,12 +1239,19 @@ static int ipqess_axi_probe(struct platf - netif_napi_add(netdev, &ess->rx_ring[i].napi_rx, ipqess_rx_napi); - } - -- err = register_netdev(netdev); -+ ess->netdev_notifier.notifier_call = ipqess_netdevice_event; -+ err = register_netdevice_notifier(&ess->netdev_notifier); - if (err) - goto err_hw_stop; - -+ err = register_netdev(netdev); -+ if (err) -+ goto err_notifier_unregister; -+ - return 0; - -+err_notifier_unregister: -+ unregister_netdevice_notifier(&ess->netdev_notifier); - err_hw_stop: - ipqess_hw_stop(ess); - ---- a/drivers/net/ethernet/qualcomm/ipqess/ipqess.h -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.h -@@ -171,6 +171,10 @@ struct ipqess { - struct platform_device *pdev; - struct phylink *phylink; - struct phylink_config phylink_config; -+ -+ struct notifier_block netdev_notifier; -+ int dsa_ports; -+ - struct ipqess_tx_ring tx_ring[IPQESS_NETDEV_QUEUES]; - - struct ipqess_statistics ipqess_stats; diff --git a/target/linux/ipq40xx/patches-6.1/703-net-qualcomm-ipqess-release-IRQ-s-on-network-device-.patch b/target/linux/ipq40xx/patches-6.1/703-net-qualcomm-ipqess-release-IRQ-s-on-network-device-.patch deleted file mode 100644 index bd890e5c71..0000000000 --- a/target/linux/ipq40xx/patches-6.1/703-net-qualcomm-ipqess-release-IRQ-s-on-network-device-.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 5f15f7f170c76220dfd36cb9037d7848d1fc4aaf Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Tue, 15 Aug 2023 14:30:50 +0200 -Subject: [PATCH] net: qualcomm: ipqess: release IRQ-s on network device stop - -Currently, IPQESS driver is obtaining the IRQ-s during ndo_open, but they -are never freed as they are device managed. - -However, it is not enough for them to be released when device is removed -as the same network device can be stopped and started multiple times which -on the second start would lead to IRQ request to fail with -EBUSY as they -have already been requested before and are not of the shared type with: -[ 34.480769] ipqess-edma c080000.ethernet eth0: Link is Down -[ 34.488070] ipqess-edma c080000.ethernet eth0: ipqess_open -[ 34.488131] genirq: Flags mismatch irq 37. 00000001 (c080000.ethernet:txq0) vs. 00000001 (c080000.ethernet:txq0) -[ 34.494527] ipqess-edma c080000.ethernet eth0: ipqess_open -[ 34.502892] genirq: Flags mismatch irq 37. 00000001 (c080000.ethernet:txq0) vs. 00000001 (c080000.ethernet:txq0) -[ 34.508137] qca8k-ipq4019 c000000.switch lan1: failed to open master eth0 -[ 34.518966] br-lan: port 1(lan1) entered blocking state -[ 34.525165] br-lan: port 1(lan1) entered disabled state -[ 34.530633] device lan1 entered promiscuous mode -[ 34.548598] ipqess-edma c080000.ethernet eth0: ipqess_open -[ 34.548660] genirq: Flags mismatch irq 37. 00000001 (c080000.ethernet:txq0) vs. 00000001 (c080000.ethernet:txq0) -[ 34.553111] qca8k-ipq4019 c000000.switch lan2: failed to open master eth0 -[ 34.563841] br-lan: port 2(lan2) entered blocking state -[ 34.570083] br-lan: port 2(lan2) entered disabled state -[ 34.575530] device lan2 entered promiscuous mode -[ 34.587067] ipqess-edma c080000.ethernet eth0: ipqess_open -[ 34.587132] genirq: Flags mismatch irq 37. 00000001 (c080000.ethernet:txq0) vs. 00000001 (c080000.ethernet:txq0) -[ 34.591579] qca8k-ipq4019 c000000.switch lan3: failed to open master eth0 -[ 34.602451] br-lan: port 3(lan3) entered blocking state -[ 34.608496] br-lan: port 3(lan3) entered disabled state -[ 34.614084] device lan3 entered promiscuous mode -[ 34.626405] ipqess-edma c080000.ethernet eth0: ipqess_open -[ 34.626468] genirq: Flags mismatch irq 37. 00000001 (c080000.ethernet:txq0) vs. 00000001 (c080000.ethernet:txq0) -[ 34.630871] qca8k-ipq4019 c000000.switch lan4: failed to open master eth0 -[ 34.641689] br-lan: port 4(lan4) entered blocking state -[ 34.647834] br-lan: port 4(lan4) entered disabled state -[ 34.653455] device lan4 entered promiscuous mode -[ 34.667282] ipqess-edma c080000.ethernet eth0: ipqess_open -[ 34.667364] genirq: Flags mismatch irq 37. 00000001 (c080000.ethernet:txq0) vs. 00000001 (c080000.ethernet:txq0) -[ 34.671830] qca8k-ipq4019 c000000.switch wan: failed to open master eth0 - -So, lets free the IRQ-s on ndo_stop after stopping NAPI and HW IRQ-s. - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - drivers/net/ethernet/qualcomm/ipqess/ipqess.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -@@ -636,9 +636,22 @@ static int ipqess_stop(struct net_device - netif_tx_stop_all_queues(netdev); - phylink_stop(ess->phylink); - ipqess_irq_disable(ess); -+ - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { -+ int qid; -+ - napi_disable(&ess->tx_ring[i].napi_tx); - napi_disable(&ess->rx_ring[i].napi_rx); -+ -+ qid = ess->tx_ring[i].idx; -+ devm_free_irq(&netdev->dev, -+ ess->tx_irq[qid], -+ &ess->tx_ring[i]); -+ -+ qid = ess->rx_ring[i].idx; -+ devm_free_irq(&netdev->dev, -+ ess->rx_irq[qid], -+ &ess->rx_ring[i]); - } - - return 0; diff --git a/target/linux/ipq40xx/patches-6.1/704-net-qualcomm-ipqess-enable-threaded-NAPI-by-default.patch b/target/linux/ipq40xx/patches-6.1/704-net-qualcomm-ipqess-enable-threaded-NAPI-by-default.patch deleted file mode 100644 index cd58677284..0000000000 --- a/target/linux/ipq40xx/patches-6.1/704-net-qualcomm-ipqess-enable-threaded-NAPI-by-default.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 9fa4a57a65e270e4d579cace4de5c438f46c7d12 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Tue, 15 Aug 2023 14:38:44 +0200 -Subject: [PATCH] net: qualcomm: ipqess: enable threaded NAPI by default - -Threaded NAPI provides a nice performance boost, so lets enable it by -default. - -We do however need to move the __napi_schedule() after HW IRQ has been -cleared in order to avoid concurency issues. - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - drivers/net/ethernet/qualcomm/ipqess/ipqess.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -@@ -530,9 +530,9 @@ static irqreturn_t ipqess_interrupt_tx(i - struct ipqess_tx_ring *tx_ring = (struct ipqess_tx_ring *)priv; - - if (likely(napi_schedule_prep(&tx_ring->napi_tx))) { -- __napi_schedule(&tx_ring->napi_tx); - ipqess_w32(tx_ring->ess, IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), - 0x0); -+ __napi_schedule(&tx_ring->napi_tx); - } - - return IRQ_HANDLED; -@@ -543,9 +543,9 @@ static irqreturn_t ipqess_interrupt_rx(i - struct ipqess_rx_ring *rx_ring = (struct ipqess_rx_ring *)priv; - - if (likely(napi_schedule_prep(&rx_ring->napi_rx))) { -- __napi_schedule(&rx_ring->napi_rx); - ipqess_w32(rx_ring->ess, IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx), - 0x0); -+ __napi_schedule(&rx_ring->napi_rx); - } - - return IRQ_HANDLED; -@@ -1261,6 +1261,8 @@ static int ipqess_axi_probe(struct platf - if (err) - goto err_notifier_unregister; - -+ dev_set_threaded(netdev, true); -+ - return 0; - - err_notifier_unregister: diff --git a/target/linux/ipq40xx/patches-6.1/705-ARM-dts-qcom-ipq4019-Add-description-for-the-IPQESS-.patch b/target/linux/ipq40xx/patches-6.1/705-ARM-dts-qcom-ipq4019-Add-description-for-the-IPQESS-.patch deleted file mode 100644 index 27bdebdb93..0000000000 --- a/target/linux/ipq40xx/patches-6.1/705-ARM-dts-qcom-ipq4019-Add-description-for-the-IPQESS-.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 5b71dbb867680887d47954ce1cc145cb747cbce6 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier <maxime.chevallier@bootlin.com> -Date: Fri, 4 Nov 2022 18:41:51 +0100 -Subject: [PATCH] ARM: dts: qcom: ipq4019: Add description for the IPQESS - Ethernet controller - -The Qualcomm IPQ4019 includes an internal 5 ports switch, which is -connected to the CPU through the internal IPQESS Ethernet controller. - -Add support for this internal interface, which is internally connected to a -modified version of the QCA8K Ethernet switch. - -This Ethernet controller only support a specific internal interface mode -for connection to the switch. - -Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> -Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 48 +++++++++++++++++++++++++++++ - 1 file changed, 48 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -594,6 +594,54 @@ - status = "disabled"; - }; - -+ gmac: ethernet@c080000 { -+ compatible = "qcom,ipq4019-ess-edma"; -+ reg = <0xc080000 0x8000>; -+ resets = <&gcc ESS_RESET>; -+ reset-names = "ess"; -+ clocks = <&gcc GCC_ESS_CLK>; -+ clock-names = "ess"; -+ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>, -+ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>; -+ phy-mode = "internal"; -+ status = "disabled"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ }; -+ }; -+ - mdio: mdio@90000 { - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/ipq40xx/patches-6.1/706-net-dsa-qca8k-add-IPQ4019-built-in-switch-support.patch b/target/linux/ipq40xx/patches-6.1/706-net-dsa-qca8k-add-IPQ4019-built-in-switch-support.patch deleted file mode 100644 index 992884cf31..0000000000 --- a/target/linux/ipq40xx/patches-6.1/706-net-dsa-qca8k-add-IPQ4019-built-in-switch-support.patch +++ /dev/null @@ -1,1132 +0,0 @@ -From a38126870488398932e017dd9d76174b4aadbbbb Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Sat, 10 Sep 2022 15:46:09 +0200 -Subject: [PATCH] net: dsa: qca8k: add IPQ4019 built-in switch support - -Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. - -It shares most of the stuff with its external counterpart, however it is -modified for the SoC. -Namely, it doesn't have second CPU port (Port 6), so it has 6 ports -instead of 7. -It also has no built-in PHY-s but rather requires external PSGMII based -companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry -out calibration before using them. -PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which -unfortunately requires some magic values as the datasheet doesnt document -the bits that are being set or the register at all. - -Since its built-in it is MMIO like other peripherals and doesn't have its -own MDIO bus but depends on the SoC provided one. - -CPU connection is at Port 0 and it uses some kind of a internal connection -and no traditional RGMII/SGMII. - -It also doesn't use in-band tagging like other qca8k switches so a out of -band based tagger is used. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - drivers/net/dsa/qca/Kconfig | 8 + - drivers/net/dsa/qca/Makefile | 1 + - drivers/net/dsa/qca/qca8k-common.c | 6 +- - drivers/net/dsa/qca/qca8k-ipq4019.c | 948 ++++++++++++++++++++++++++++ - drivers/net/dsa/qca/qca8k.h | 56 ++ - 5 files changed, 1016 insertions(+), 3 deletions(-) - create mode 100644 drivers/net/dsa/qca/qca8k-ipq4019.c - ---- a/drivers/net/dsa/qca/Kconfig -+++ b/drivers/net/dsa/qca/Kconfig -@@ -23,3 +23,11 @@ config NET_DSA_QCA8K_LEDS_SUPPORT - help - This enabled support for LEDs present on the Qualcomm Atheros - QCA8K Ethernet switch chips. -+ -+config NET_DSA_QCA8K_IPQ4019 -+ tristate "Qualcomm Atheros IPQ4019 Ethernet switch support" -+ select NET_DSA_TAG_OOB -+ select REGMAP_MMIO -+ help -+ This enables support for the switch built-into Qualcomm Atheros -+ IPQ4019 SoCs. ---- a/drivers/net/dsa/qca/Makefile -+++ b/drivers/net/dsa/qca/Makefile -@@ -5,3 +5,4 @@ qca8k-y += qca8k-common.o qca8k-8xxx. - ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT - qca8k-y += qca8k-leds.o - endif -+obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o qca8k-common.o ---- a/drivers/net/dsa/qca/qca8k-common.c -+++ b/drivers/net/dsa/qca/qca8k-common.c -@@ -412,7 +412,7 @@ static int qca8k_vlan_del(struct qca8k_p - - /* Check if we're the last member to be removed */ - del = true; -- for (i = 0; i < QCA8K_NUM_PORTS; i++) { -+ for (i = 0; i < priv->ds->num_ports; i++) { - mask = QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(i); - - if ((reg & mask) != mask) { -@@ -653,7 +653,7 @@ int qca8k_port_bridge_join(struct dsa_sw - cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - port_mask = BIT(cpu_port); - -- for (i = 0; i < QCA8K_NUM_PORTS; i++) { -+ for (i = 0; i < ds->num_ports; i++) { - if (dsa_is_cpu_port(ds, i)) - continue; - if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) -@@ -685,7 +685,7 @@ void qca8k_port_bridge_leave(struct dsa_ - - cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - -- for (i = 0; i < QCA8K_NUM_PORTS; i++) { -+ for (i = 0; i < ds->num_ports; i++) { - if (dsa_is_cpu_port(ds, i)) - continue; - if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) ---- /dev/null -+++ b/drivers/net/dsa/qca/qca8k-ipq4019.c -@@ -0,0 +1,948 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name> -+ * Copyright (C) 2011-2012, 2020-2021 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved. -+ * Copyright (c) 2016 John Crispin <john@phrozen.org> -+ * Copyright (c) 2022 Robert Marko <robert.marko@sartura.hr> -+ */ -+ -+#include <linux/module.h> -+#include <linux/phy.h> -+#include <linux/netdevice.h> -+#include <linux/bitfield.h> -+#include <linux/regmap.h> -+#include <net/dsa.h> -+#include <linux/of_net.h> -+#include <linux/of_mdio.h> -+#include <linux/of_platform.h> -+#include <linux/mdio.h> -+#include <linux/phylink.h> -+ -+#include "qca8k.h" -+ -+static struct regmap_config qca8k_ipq4019_regmap_config = { -+ .reg_bits = 32, -+ .val_bits = 32, -+ .reg_stride = 4, -+ .max_register = 0x16ac, /* end MIB - Port6 range */ -+ .rd_table = &qca8k_readable_table, -+}; -+ -+static struct regmap_config qca8k_ipq4019_psgmii_phy_regmap_config = { -+ .name = "psgmii-phy", -+ .reg_bits = 32, -+ .val_bits = 32, -+ .reg_stride = 4, -+ .max_register = 0x7fc, -+}; -+ -+static enum dsa_tag_protocol -+qca8k_ipq4019_get_tag_protocol(struct dsa_switch *ds, int port, -+ enum dsa_tag_protocol mp) -+{ -+ return DSA_TAG_PROTO_OOB; -+} -+ -+static struct phylink_pcs * -+qca8k_ipq4019_phylink_mac_select_pcs(struct dsa_switch *ds, int port, -+ phy_interface_t interface) -+{ -+ struct qca8k_priv *priv = ds->priv; -+ struct phylink_pcs *pcs = NULL; -+ -+ switch (interface) { -+ case PHY_INTERFACE_MODE_PSGMII: -+ switch (port) { -+ case 0: -+ pcs = &priv->pcs_port_0.pcs; -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return pcs; -+} -+ -+static int qca8k_ipq4019_pcs_config(struct phylink_pcs *pcs, unsigned int mode, -+ phy_interface_t interface, -+ const unsigned long *advertising, -+ bool permit_pause_to_mac) -+{ -+ return 0; -+} -+ -+static void qca8k_ipq4019_pcs_an_restart(struct phylink_pcs *pcs) -+{ -+} -+ -+static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs) -+{ -+ return container_of(pcs, struct qca8k_pcs, pcs); -+} -+ -+static void qca8k_ipq4019_pcs_get_state(struct phylink_pcs *pcs, -+ struct phylink_link_state *state) -+{ -+ struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv; -+ int port = pcs_to_qca8k_pcs(pcs)->port; -+ u32 reg; -+ int ret; -+ -+ ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); -+ if (ret < 0) { -+ state->link = false; -+ return; -+ } -+ -+ state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); -+ state->an_complete = state->link; -+ state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : -+ DUPLEX_HALF; -+ -+ switch (reg & QCA8K_PORT_STATUS_SPEED) { -+ case QCA8K_PORT_STATUS_SPEED_10: -+ state->speed = SPEED_10; -+ break; -+ case QCA8K_PORT_STATUS_SPEED_100: -+ state->speed = SPEED_100; -+ break; -+ case QCA8K_PORT_STATUS_SPEED_1000: -+ state->speed = SPEED_1000; -+ break; -+ default: -+ state->speed = SPEED_UNKNOWN; -+ break; -+ } -+ -+ if (reg & QCA8K_PORT_STATUS_RXFLOW) -+ state->pause |= MLO_PAUSE_RX; -+ if (reg & QCA8K_PORT_STATUS_TXFLOW) -+ state->pause |= MLO_PAUSE_TX; -+} -+ -+static const struct phylink_pcs_ops qca8k_pcs_ops = { -+ .pcs_get_state = qca8k_ipq4019_pcs_get_state, -+ .pcs_config = qca8k_ipq4019_pcs_config, -+ .pcs_an_restart = qca8k_ipq4019_pcs_an_restart, -+}; -+ -+static void qca8k_ipq4019_setup_pcs(struct qca8k_priv *priv, -+ struct qca8k_pcs *qpcs, -+ int port) -+{ -+ qpcs->pcs.ops = &qca8k_pcs_ops; -+ -+ /* We don't have interrupts for link changes, so we need to poll */ -+ qpcs->pcs.poll = true; -+ qpcs->priv = priv; -+ qpcs->port = port; -+} -+ -+static void qca8k_ipq4019_phylink_get_caps(struct dsa_switch *ds, int port, -+ struct phylink_config *config) -+{ -+ switch (port) { -+ case 0: /* CPU port */ -+ __set_bit(PHY_INTERFACE_MODE_INTERNAL, -+ config->supported_interfaces); -+ break; -+ -+ case 1: -+ case 2: -+ case 3: -+ __set_bit(PHY_INTERFACE_MODE_PSGMII, -+ config->supported_interfaces); -+ break; -+ case 4: -+ case 5: -+ phy_interface_set_rgmii(config->supported_interfaces); -+ __set_bit(PHY_INTERFACE_MODE_PSGMII, -+ config->supported_interfaces); -+ break; -+ } -+ -+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | -+ MAC_10 | MAC_100 | MAC_1000FD; -+ -+ config->legacy_pre_march2020 = false; -+} -+ -+static void -+qca8k_phylink_ipq4019_mac_link_down(struct dsa_switch *ds, int port, -+ unsigned int mode, -+ phy_interface_t interface) -+{ -+ struct qca8k_priv *priv = ds->priv; -+ -+ qca8k_port_set_status(priv, port, 0); -+} -+ -+static void -+qca8k_phylink_ipq4019_mac_link_up(struct dsa_switch *ds, int port, -+ unsigned int mode, phy_interface_t interface, -+ struct phy_device *phydev, int speed, -+ int duplex, bool tx_pause, bool rx_pause) -+{ -+ struct qca8k_priv *priv = ds->priv; -+ u32 reg; -+ -+ if (phylink_autoneg_inband(mode)) { -+ reg = QCA8K_PORT_STATUS_LINK_AUTO; -+ } else { -+ switch (speed) { -+ case SPEED_10: -+ reg = QCA8K_PORT_STATUS_SPEED_10; -+ break; -+ case SPEED_100: -+ reg = QCA8K_PORT_STATUS_SPEED_100; -+ break; -+ case SPEED_1000: -+ reg = QCA8K_PORT_STATUS_SPEED_1000; -+ break; -+ default: -+ reg = QCA8K_PORT_STATUS_LINK_AUTO; -+ break; -+ } -+ -+ if (duplex == DUPLEX_FULL) -+ reg |= QCA8K_PORT_STATUS_DUPLEX; -+ -+ if (rx_pause || dsa_is_cpu_port(ds, port)) -+ reg |= QCA8K_PORT_STATUS_RXFLOW; -+ -+ if (tx_pause || dsa_is_cpu_port(ds, port)) -+ reg |= QCA8K_PORT_STATUS_TXFLOW; -+ } -+ -+ reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC; -+ -+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg); -+} -+ -+static int psgmii_vco_calibrate(struct qca8k_priv *priv) -+{ -+ int val, ret; -+ -+ if (!priv->psgmii_ethphy) { -+ dev_err(priv->dev, "PSGMII eth PHY missing, calibration failed!\n"); -+ return -ENODEV; -+ } -+ -+ /* Fix PSGMII RX 20bit */ -+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b); -+ /* Reset PHY PSGMII */ -+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x1b); -+ /* Release PHY PSGMII reset */ -+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b); -+ -+ /* Poll for VCO PLL calibration finish - Malibu(QCA8075) */ -+ ret = phy_read_mmd_poll_timeout(priv->psgmii_ethphy, -+ MDIO_MMD_PMAPMD, -+ 0x28, val, -+ (val & BIT(0)), -+ 10000, 1000000, -+ false); -+ if (ret) { -+ dev_err(priv->dev, "QCA807x PSGMII VCO calibration PLL not ready\n"); -+ return ret; -+ } -+ mdelay(50); -+ -+ /* Freeze PSGMII RX CDR */ -+ ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x2230); -+ -+ /* Start PSGMIIPHY VCO PLL calibration */ -+ ret = regmap_set_bits(priv->psgmii, -+ PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1, -+ PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART); -+ -+ /* Poll for PSGMIIPHY PLL calibration finish - Dakota(IPQ40xx) */ -+ ret = regmap_read_poll_timeout(priv->psgmii, -+ PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2, -+ val, val & PSGMIIPHY_REG_PLL_VCO_CALIB_READY, -+ 10000, 1000000); -+ if (ret) { -+ dev_err(priv->dev, "IPQ PSGMIIPHY VCO calibration PLL not ready\n"); -+ return ret; -+ } -+ mdelay(50); -+ -+ /* Release PSGMII RX CDR */ -+ ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x3230); -+ /* Release PSGMII RX 20bit */ -+ ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5f); -+ mdelay(200); -+ -+ return ret; -+} -+ -+static void -+qca8k_switch_port_loopback_on_off(struct qca8k_priv *priv, int port, int on) -+{ -+ u32 val = QCA8K_PORT_LOOKUP_LOOPBACK_EN; -+ -+ if (on == 0) -+ val = 0; -+ -+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), -+ QCA8K_PORT_LOOKUP_LOOPBACK_EN, val); -+} -+ -+static int -+qca8k_wait_for_phy_link_state(struct phy_device *phy, int need_status) -+{ -+ int a; -+ u16 status; -+ -+ for (a = 0; a < 100; a++) { -+ status = phy_read(phy, MII_QCA8075_SSTATUS); -+ status &= QCA8075_PHY_SPEC_STATUS_LINK; -+ status = !!status; -+ if (status == need_status) -+ return 0; -+ mdelay(8); -+ } -+ -+ return -1; -+} -+ -+static void -+qca8k_phy_loopback_on_off(struct qca8k_priv *priv, struct phy_device *phy, -+ int sw_port, int on) -+{ -+ if (on) { -+ phy_write(phy, MII_BMCR, BMCR_ANENABLE | BMCR_RESET); -+ phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN); -+ qca8k_wait_for_phy_link_state(phy, 0); -+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0); -+ phy_write(phy, MII_BMCR, -+ BMCR_SPEED1000 | -+ BMCR_FULLDPLX | -+ BMCR_LOOPBACK); -+ qca8k_wait_for_phy_link_state(phy, 1); -+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), -+ QCA8K_PORT_STATUS_SPEED_1000 | -+ QCA8K_PORT_STATUS_TXMAC | -+ QCA8K_PORT_STATUS_RXMAC | -+ QCA8K_PORT_STATUS_DUPLEX); -+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port), -+ QCA8K_PORT_LOOKUP_STATE_FORWARD, -+ QCA8K_PORT_LOOKUP_STATE_FORWARD); -+ } else { /* off */ -+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0); -+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port), -+ QCA8K_PORT_LOOKUP_STATE_DISABLED, -+ QCA8K_PORT_LOOKUP_STATE_DISABLED); -+ phy_write(phy, MII_BMCR, BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_RESET); -+ /* turn off the power of the phys - so that unused -+ ports do not raise links */ -+ phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN); -+ } -+} -+ -+static void -+qca8k_phy_pkt_gen_prep(struct qca8k_priv *priv, struct phy_device *phy, -+ int pkts_num, int on) -+{ -+ if (on) { -+ /* enable CRC checker and packets counters */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0); -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, -+ QCA8075_MMD7_CNT_FRAME_CHK_EN | QCA8075_MMD7_CNT_SELFCLR); -+ qca8k_wait_for_phy_link_state(phy, 1); -+ /* packet number */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, pkts_num); -+ /* pkt size - 1504 bytes + 20 bytes */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_SIZE, 1504); -+ } else { /* off */ -+ /* packet number */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, 0); -+ /* disable CRC checker and packet counter */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0); -+ /* disable traffic gen */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, 0); -+ } -+} -+ -+static void -+qca8k_wait_for_phy_pkt_gen_fin(struct qca8k_priv *priv, struct phy_device *phy) -+{ -+ int val; -+ /* wait for all traffic end: 4096(pkt num)*1524(size)*8ns(125MHz)=49938us */ -+ phy_read_mmd_poll_timeout(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, -+ val, !(val & QCA8075_MMD7_PKT_GEN_INPROGR), -+ 50000, 1000000, true); -+} -+ -+static void -+qca8k_start_phy_pkt_gen(struct phy_device *phy) -+{ -+ /* start traffic gen */ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, -+ QCA8075_MMD7_PKT_GEN_START | QCA8075_MMD7_PKT_GEN_INPROGR); -+} -+ -+static int -+qca8k_start_all_phys_pkt_gens(struct qca8k_priv *priv) -+{ -+ struct phy_device *phy; -+ phy = phy_device_create(priv->bus, QCA8075_MDIO_BRDCST_PHY_ADDR, -+ 0, 0, NULL); -+ if (!phy) { -+ dev_err(priv->dev, "unable to create mdio broadcast PHY(0x%x)\n", -+ QCA8075_MDIO_BRDCST_PHY_ADDR); -+ return -ENODEV; -+ } -+ -+ qca8k_start_phy_pkt_gen(phy); -+ -+ phy_device_free(phy); -+ return 0; -+} -+ -+static int -+qca8k_get_phy_pkt_gen_test_result(struct phy_device *phy, int pkts_num) -+{ -+ u32 tx_ok, tx_error; -+ u32 rx_ok, rx_error; -+ u32 tx_ok_high16; -+ u32 rx_ok_high16; -+ u32 tx_all_ok, rx_all_ok; -+ -+ /* check counters */ -+ tx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_LO); -+ tx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_HI); -+ tx_error = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_ERR_CNT); -+ rx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_LO); -+ rx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_HI); -+ rx_error = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_ERR_CNT); -+ tx_all_ok = tx_ok + (tx_ok_high16 << 16); -+ rx_all_ok = rx_ok + (rx_ok_high16 << 16); -+ -+ if (tx_all_ok < pkts_num) -+ return -1; -+ if(rx_all_ok < pkts_num) -+ return -2; -+ if(tx_error) -+ return -3; -+ if(rx_error) -+ return -4; -+ return 0; /* test is ok */ -+} -+ -+static -+void qca8k_phy_broadcast_write_on_off(struct qca8k_priv *priv, -+ struct phy_device *phy, int on) -+{ -+ u32 val; -+ -+ val = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE); -+ -+ if (on == 0) -+ val &= ~QCA8075_MMD7_MDIO_BRDCST_WRITE_EN; -+ else -+ val |= QCA8075_MMD7_MDIO_BRDCST_WRITE_EN; -+ -+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE, val); -+} -+ -+static int -+qca8k_test_dsa_port_for_errors(struct qca8k_priv *priv, struct phy_device *phy, -+ int port, int test_phase) -+{ -+ int res = 0; -+ const int test_pkts_num = QCA8075_PKT_GEN_PKTS_COUNT; -+ -+ if (test_phase == 1) { /* start test preps */ -+ qca8k_phy_loopback_on_off(priv, phy, port, 1); -+ qca8k_switch_port_loopback_on_off(priv, port, 1); -+ qca8k_phy_broadcast_write_on_off(priv, phy, 1); -+ qca8k_phy_pkt_gen_prep(priv, phy, test_pkts_num, 1); -+ } else if (test_phase == 2) { -+ /* wait for test results, collect it and cleanup */ -+ qca8k_wait_for_phy_pkt_gen_fin(priv, phy); -+ res = qca8k_get_phy_pkt_gen_test_result(phy, test_pkts_num); -+ qca8k_phy_pkt_gen_prep(priv, phy, test_pkts_num, 0); -+ qca8k_phy_broadcast_write_on_off(priv, phy, 0); -+ qca8k_switch_port_loopback_on_off(priv, port, 0); -+ qca8k_phy_loopback_on_off(priv, phy, port, 0); -+ } -+ -+ return res; -+} -+ -+static int -+qca8k_do_dsa_sw_ports_self_test(struct qca8k_priv *priv, int parallel_test) -+{ -+ struct device_node *dn = priv->dev->of_node; -+ struct device_node *ports, *port; -+ struct device_node *phy_dn; -+ struct phy_device *phy; -+ int reg, err = 0, test_phase; -+ u32 tests_result = 0; -+ -+ ports = of_get_child_by_name(dn, "ports"); -+ if (!ports) { -+ dev_err(priv->dev, "no ports child node found\n"); -+ return -EINVAL; -+ } -+ -+ for (test_phase = 1; test_phase <= 2; test_phase++) { -+ if (parallel_test && test_phase == 2) { -+ err = qca8k_start_all_phys_pkt_gens(priv); -+ if (err) -+ goto error; -+ } -+ for_each_available_child_of_node(ports, port) { -+ err = of_property_read_u32(port, "reg", ®); -+ if (err) -+ goto error; -+ if (reg >= QCA8K_NUM_PORTS) { -+ err = -EINVAL; -+ goto error; -+ } -+ phy_dn = of_parse_phandle(port, "phy-handle", 0); -+ if (phy_dn) { -+ phy = of_phy_find_device(phy_dn); -+ of_node_put(phy_dn); -+ if (phy) { -+ int result; -+ result = qca8k_test_dsa_port_for_errors(priv, -+ phy, reg, test_phase); -+ if (!parallel_test && test_phase == 1) -+ qca8k_start_phy_pkt_gen(phy); -+ put_device(&phy->mdio.dev); -+ if (test_phase == 2) { -+ tests_result <<= 1; -+ if (result) -+ tests_result |= 1; -+ } -+ } -+ } -+ } -+ } -+ -+end: -+ of_node_put(ports); -+ qca8k_fdb_flush(priv); -+ return tests_result; -+error: -+ tests_result |= 0xf000; -+ goto end; -+} -+ -+static int -+psgmii_vco_calibrate_and_test(struct dsa_switch *ds) -+{ -+ int ret, a, test_result; -+ struct qca8k_priv *priv = ds->priv; -+ -+ for (a = 0; a <= QCA8K_PSGMII_CALB_NUM; a++) { -+ ret = psgmii_vco_calibrate(priv); -+ if (ret) -+ return ret; -+ /* first we run serial test */ -+ test_result = qca8k_do_dsa_sw_ports_self_test(priv, 0); -+ /* and if it is ok then we run the test in parallel */ -+ if (!test_result) -+ test_result = qca8k_do_dsa_sw_ports_self_test(priv, 1); -+ if (!test_result) { -+ if (a > 0) { -+ dev_warn(priv->dev, "PSGMII work was stabilized after %d " -+ "calibration retries !\n", a); -+ } -+ return 0; -+ } else { -+ schedule(); -+ if (a > 0 && a % 10 == 0) { -+ dev_err(priv->dev, "PSGMII work is unstable !!! " -+ "Let's try to wait a bit ... %d\n", a); -+ set_current_state(TASK_INTERRUPTIBLE); -+ schedule_timeout(msecs_to_jiffies(a * 100)); -+ } -+ } -+ } -+ -+ panic("PSGMII work is unstable !!! " -+ "Repeated recalibration attempts did not help(0x%x) !\n", -+ test_result); -+ -+ return -EFAULT; -+} -+ -+static int -+ipq4019_psgmii_configure(struct dsa_switch *ds) -+{ -+ struct qca8k_priv *priv = ds->priv; -+ int ret; -+ -+ if (!priv->psgmii_calibrated) { -+ dev_info(ds->dev, "PSGMII calibration!\n"); -+ ret = psgmii_vco_calibrate_and_test(ds); -+ -+ ret = regmap_clear_bits(priv->psgmii, PSGMIIPHY_MODE_CONTROL, -+ PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M); -+ ret = regmap_write(priv->psgmii, PSGMIIPHY_TX_CONTROL, -+ PSGMIIPHY_TX_CONTROL_MAGIC_VALUE); -+ -+ priv->psgmii_calibrated = true; -+ -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void -+qca8k_phylink_ipq4019_mac_config(struct dsa_switch *ds, int port, -+ unsigned int mode, -+ const struct phylink_link_state *state) -+{ -+ struct qca8k_priv *priv = ds->priv; -+ -+ switch (port) { -+ case 0: -+ /* CPU port, no configuration needed */ -+ return; -+ case 1: -+ case 2: -+ case 3: -+ if (state->interface == PHY_INTERFACE_MODE_PSGMII) -+ if (ipq4019_psgmii_configure(ds)) -+ dev_err(ds->dev, "PSGMII configuration failed!\n"); -+ return; -+ case 4: -+ case 5: -+ if (state->interface == PHY_INTERFACE_MODE_RGMII || -+ state->interface == PHY_INTERFACE_MODE_RGMII_ID || -+ state->interface == PHY_INTERFACE_MODE_RGMII_RXID || -+ state->interface == PHY_INTERFACE_MODE_RGMII_TXID) { -+ regmap_set_bits(priv->regmap, -+ QCA8K_IPQ4019_REG_RGMII_CTRL, -+ QCA8K_IPQ4019_RGMII_CTRL_CLK); -+ } -+ -+ if (state->interface == PHY_INTERFACE_MODE_PSGMII) -+ if (ipq4019_psgmii_configure(ds)) -+ dev_err(ds->dev, "PSGMII configuration failed!\n"); -+ return; -+ default: -+ dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); -+ return; -+ } -+} -+ -+static int -+qca8k_ipq4019_setup_port(struct dsa_switch *ds, int port) -+{ -+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; -+ int ret; -+ -+ /* CPU port gets connected to all user ports of the switch */ -+ if (dsa_is_cpu_port(ds, port)) { -+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), -+ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); -+ if (ret) -+ return ret; -+ -+ /* Disable CPU ARP Auto-learning by default */ -+ ret = regmap_clear_bits(priv->regmap, -+ QCA8K_PORT_LOOKUP_CTRL(port), -+ QCA8K_PORT_LOOKUP_LEARN); -+ if (ret) -+ return ret; -+ } -+ -+ /* Individual user ports get connected to CPU port only */ -+ if (dsa_is_user_port(ds, port)) { -+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), -+ QCA8K_PORT_LOOKUP_MEMBER, -+ BIT(QCA8K_IPQ4019_CPU_PORT)); -+ if (ret) -+ return ret; -+ -+ /* Enable ARP Auto-learning by default */ -+ ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port), -+ QCA8K_PORT_LOOKUP_LEARN); -+ if (ret) -+ return ret; -+ -+ /* For port based vlans to work we need to set the -+ * default egress vid -+ */ -+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), -+ QCA8K_EGREES_VLAN_PORT_MASK(port), -+ QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF)); -+ if (ret) -+ return ret; -+ -+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), -+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | -+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int -+qca8k_ipq4019_setup(struct dsa_switch *ds) -+{ -+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; -+ int ret, i; -+ -+ /* Make sure that port 0 is the cpu port */ -+ if (!dsa_is_cpu_port(ds, QCA8K_IPQ4019_CPU_PORT)) { -+ dev_err(priv->dev, "port %d is not the CPU port", -+ QCA8K_IPQ4019_CPU_PORT); -+ return -EINVAL; -+ } -+ -+ qca8k_ipq4019_setup_pcs(priv, &priv->pcs_port_0, 0); -+ -+ /* Enable CPU Port */ -+ ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, -+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); -+ if (ret) { -+ dev_err(priv->dev, "failed enabling CPU port"); -+ return ret; -+ } -+ -+ /* Enable MIB counters */ -+ ret = qca8k_mib_init(priv); -+ if (ret) -+ dev_warn(priv->dev, "MIB init failed"); -+ -+ /* Disable forwarding by default on all ports */ -+ for (i = 0; i < QCA8K_IPQ4019_NUM_PORTS; i++) { -+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), -+ QCA8K_PORT_LOOKUP_MEMBER, 0); -+ if (ret) -+ return ret; -+ } -+ -+ /* Enable QCA header mode on the CPU port */ -+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_IPQ4019_CPU_PORT), -+ FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) | -+ FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL)); -+ if (ret) { -+ dev_err(priv->dev, "failed enabling QCA header mode"); -+ return ret; -+ } -+ -+ /* Disable MAC by default on all ports */ -+ for (i = 0; i < QCA8K_IPQ4019_NUM_PORTS; i++) { -+ if (dsa_is_user_port(ds, i)) -+ qca8k_port_set_status(priv, i, 0); -+ } -+ -+ /* Forward all unknown frames to CPU port for Linux processing */ -+ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, -+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(QCA8K_IPQ4019_CPU_PORT)) | -+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(QCA8K_IPQ4019_CPU_PORT)) | -+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(QCA8K_IPQ4019_CPU_PORT)) | -+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(QCA8K_IPQ4019_CPU_PORT))); -+ if (ret) -+ return ret; -+ -+ /* Setup connection between CPU port & user ports */ -+ for (i = 0; i < QCA8K_IPQ4019_NUM_PORTS; i++) { -+ ret = qca8k_ipq4019_setup_port(ds, i); -+ if (ret) -+ return ret; -+ } -+ -+ /* Setup our port MTUs to match power on defaults */ -+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); -+ if (ret) -+ dev_warn(priv->dev, "failed setting MTU settings"); -+ -+ /* Flush the FDB table */ -+ qca8k_fdb_flush(priv); -+ -+ /* Set min a max ageing value supported */ -+ ds->ageing_time_min = 7000; -+ ds->ageing_time_max = 458745000; -+ -+ /* Set max number of LAGs supported */ -+ ds->num_lag_ids = QCA8K_NUM_LAGS; -+ -+ /* CPU port HW learning doesnt work correctly, so let DSA handle it */ -+ ds->assisted_learning_on_cpu_port = true; -+ -+ return 0; -+} -+ -+static const struct dsa_switch_ops qca8k_ipq4019_switch_ops = { -+ .get_tag_protocol = qca8k_ipq4019_get_tag_protocol, -+ .setup = qca8k_ipq4019_setup, -+ .get_strings = qca8k_get_strings, -+ .get_ethtool_stats = qca8k_get_ethtool_stats, -+ .get_sset_count = qca8k_get_sset_count, -+ .set_ageing_time = qca8k_set_ageing_time, -+ .get_mac_eee = qca8k_get_mac_eee, -+ .set_mac_eee = qca8k_set_mac_eee, -+ .port_enable = qca8k_port_enable, -+ .port_disable = qca8k_port_disable, -+ .port_change_mtu = qca8k_port_change_mtu, -+ .port_max_mtu = qca8k_port_max_mtu, -+ .port_stp_state_set = qca8k_port_stp_state_set, -+ .port_bridge_join = qca8k_port_bridge_join, -+ .port_bridge_leave = qca8k_port_bridge_leave, -+ .port_fast_age = qca8k_port_fast_age, -+ .port_fdb_add = qca8k_port_fdb_add, -+ .port_fdb_del = qca8k_port_fdb_del, -+ .port_fdb_dump = qca8k_port_fdb_dump, -+ .port_mdb_add = qca8k_port_mdb_add, -+ .port_mdb_del = qca8k_port_mdb_del, -+ .port_mirror_add = qca8k_port_mirror_add, -+ .port_mirror_del = qca8k_port_mirror_del, -+ .port_vlan_filtering = qca8k_port_vlan_filtering, -+ .port_vlan_add = qca8k_port_vlan_add, -+ .port_vlan_del = qca8k_port_vlan_del, -+ .phylink_mac_select_pcs = qca8k_ipq4019_phylink_mac_select_pcs, -+ .phylink_get_caps = qca8k_ipq4019_phylink_get_caps, -+ .phylink_mac_config = qca8k_phylink_ipq4019_mac_config, -+ .phylink_mac_link_down = qca8k_phylink_ipq4019_mac_link_down, -+ .phylink_mac_link_up = qca8k_phylink_ipq4019_mac_link_up, -+ .port_lag_join = qca8k_port_lag_join, -+ .port_lag_leave = qca8k_port_lag_leave, -+}; -+ -+static const struct qca8k_match_data ipq4019 = { -+ .id = QCA8K_ID_IPQ4019, -+ .mib_count = QCA8K_QCA833X_MIB_COUNT, -+}; -+ -+static int -+qca8k_ipq4019_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct qca8k_priv *priv; -+ void __iomem *base, *psgmii; -+ struct device_node *np = dev->of_node, *mdio_np, *psgmii_ethphy_np; -+ int ret; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ priv->dev = dev; -+ priv->info = &ipq4019; -+ -+ /* Start by setting up the register mapping */ -+ base = devm_platform_ioremap_resource_byname(pdev, "base"); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ priv->regmap = devm_regmap_init_mmio(dev, base, -+ &qca8k_ipq4019_regmap_config); -+ if (IS_ERR(priv->regmap)) { -+ ret = PTR_ERR(priv->regmap); -+ dev_err(dev, "base regmap initialization failed, %d\n", ret); -+ return ret; -+ } -+ -+ psgmii = devm_platform_ioremap_resource_byname(pdev, "psgmii_phy"); -+ if (IS_ERR(psgmii)) -+ return PTR_ERR(psgmii); -+ -+ priv->psgmii = devm_regmap_init_mmio(dev, psgmii, -+ &qca8k_ipq4019_psgmii_phy_regmap_config); -+ if (IS_ERR(priv->psgmii)) { -+ ret = PTR_ERR(priv->psgmii); -+ dev_err(dev, "PSGMII regmap initialization failed, %d\n", ret); -+ return ret; -+ } -+ -+ mdio_np = of_parse_phandle(np, "mdio", 0); -+ if (!mdio_np) { -+ dev_err(dev, "unable to get MDIO bus phandle\n"); -+ of_node_put(mdio_np); -+ return -EINVAL; -+ } -+ -+ priv->bus = of_mdio_find_bus(mdio_np); -+ of_node_put(mdio_np); -+ if (!priv->bus) { -+ dev_err(dev, "unable to find MDIO bus\n"); -+ return -EPROBE_DEFER; -+ } -+ -+ psgmii_ethphy_np = of_parse_phandle(np, "psgmii-ethphy", 0); -+ if (!psgmii_ethphy_np) { -+ dev_dbg(dev, "unable to get PSGMII eth PHY phandle\n"); -+ of_node_put(psgmii_ethphy_np); -+ } -+ -+ if (psgmii_ethphy_np) { -+ priv->psgmii_ethphy = of_phy_find_device(psgmii_ethphy_np); -+ of_node_put(psgmii_ethphy_np); -+ if (!priv->psgmii_ethphy) { -+ dev_err(dev, "unable to get PSGMII eth PHY\n"); -+ return -ENODEV; -+ } -+ } -+ -+ /* Check the detected switch id */ -+ ret = qca8k_read_switch_id(priv); -+ if (ret) -+ return ret; -+ -+ priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); -+ if (!priv->ds) -+ return -ENOMEM; -+ -+ priv->ds->dev = dev; -+ priv->ds->num_ports = QCA8K_IPQ4019_NUM_PORTS; -+ priv->ds->priv = priv; -+ priv->ds->ops = &qca8k_ipq4019_switch_ops; -+ mutex_init(&priv->reg_mutex); -+ platform_set_drvdata(pdev, priv); -+ -+ return dsa_register_switch(priv->ds); -+} -+ -+static int -+qca8k_ipq4019_remove(struct platform_device *pdev) -+{ -+ struct qca8k_priv *priv = dev_get_drvdata(&pdev->dev); -+ int i; -+ -+ if (!priv) -+ return 0; -+ -+ for (i = 0; i < QCA8K_IPQ4019_NUM_PORTS; i++) -+ qca8k_port_set_status(priv, i, 0); -+ -+ dsa_unregister_switch(priv->ds); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ return 0; -+} -+ -+static const struct of_device_id qca8k_ipq4019_of_match[] = { -+ { .compatible = "qca,ipq4019-qca8337n", }, -+ { /* sentinel */ }, -+}; -+ -+static struct platform_driver qca8k_ipq4019_driver = { -+ .probe = qca8k_ipq4019_probe, -+ .remove = qca8k_ipq4019_remove, -+ .driver = { -+ .name = "qca8k-ipq4019", -+ .of_match_table = qca8k_ipq4019_of_match, -+ }, -+}; -+ -+module_platform_driver(qca8k_ipq4019_driver); -+ -+MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>"); -+MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>, Robert Marko <robert.marko@sartura.hr>"); -+MODULE_DESCRIPTION("Qualcomm IPQ4019 built-in switch driver"); -+MODULE_LICENSE("GPL"); ---- a/drivers/net/dsa/qca/qca8k.h -+++ b/drivers/net/dsa/qca/qca8k.h -@@ -19,7 +19,10 @@ - #define QCA8K_ETHERNET_TIMEOUT 5 - - #define QCA8K_NUM_PORTS 7 -+#define QCA8K_IPQ4019_NUM_PORTS 6 - #define QCA8K_NUM_CPU_PORTS 2 -+#define QCA8K_IPQ4019_NUM_CPU_PORTS 1 -+#define QCA8K_IPQ4019_CPU_PORT 0 - #define QCA8K_MAX_MTU 9000 - #define QCA8K_NUM_LAGS 4 - #define QCA8K_NUM_PORTS_FOR_LAG 4 -@@ -28,6 +31,7 @@ - #define QCA8K_ID_QCA8327 0x12 - #define PHY_ID_QCA8337 0x004dd036 - #define QCA8K_ID_QCA8337 0x13 -+#define QCA8K_ID_IPQ4019 0x14 - - #define QCA8K_QCA832X_MIB_COUNT 39 - #define QCA8K_QCA833X_MIB_COUNT 41 -@@ -265,6 +269,7 @@ - #define QCA8K_PORT_LOOKUP_STATE_LEARNING QCA8K_PORT_LOOKUP_STATE(0x3) - #define QCA8K_PORT_LOOKUP_STATE_FORWARD QCA8K_PORT_LOOKUP_STATE(0x4) - #define QCA8K_PORT_LOOKUP_LEARN BIT(20) -+#define QCA8K_PORT_LOOKUP_LOOPBACK_EN BIT(21) - #define QCA8K_PORT_LOOKUP_ING_MIRROR_EN BIT(25) - - #define QCA8K_REG_GOL_TRUNK_CTRL0 0x700 -@@ -341,6 +346,53 @@ - #define MII_ATH_MMD_ADDR 0x0d - #define MII_ATH_MMD_DATA 0x0e - -+/* IPQ4019 PSGMII PHY registers */ -+#define QCA8K_IPQ4019_REG_RGMII_CTRL 0x004 -+#define QCA8K_IPQ4019_RGMII_CTRL_RGMII_RXC GENMASK(1, 0) -+#define QCA8K_IPQ4019_RGMII_CTRL_RGMII_TXC GENMASK(9, 8) -+/* Some kind of CLK selection -+ * 0: gcc_ess_dly2ns -+ * 1: gcc_ess_clk -+ */ -+#define QCA8K_IPQ4019_RGMII_CTRL_CLK BIT(10) -+#define QCA8K_IPQ4019_RGMII_CTRL_DELAY_RMII0 GENMASK(17, 16) -+#define QCA8K_IPQ4019_RGMII_CTRL_INVERT_RMII0_REF_CLK BIT(18) -+#define QCA8K_IPQ4019_RGMII_CTRL_DELAY_RMII1 GENMASK(20, 19) -+#define QCA8K_IPQ4019_RGMII_CTRL_INVERT_RMII1_REF_CLK BIT(21) -+#define QCA8K_IPQ4019_RGMII_CTRL_INVERT_RMII0_MASTER_EN BIT(24) -+#define QCA8K_IPQ4019_RGMII_CTRL_INVERT_RMII1_MASTER_EN BIT(25) -+ -+#define PSGMIIPHY_MODE_CONTROL 0x1b4 -+#define PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M BIT(0) -+#define PSGMIIPHY_TX_CONTROL 0x288 -+#define PSGMIIPHY_TX_CONTROL_MAGIC_VALUE 0x8380 -+#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1 0x9c -+#define PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART BIT(14) -+#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2 0xa0 -+#define PSGMIIPHY_REG_PLL_VCO_CALIB_READY BIT(0) -+ -+#define QCA8K_PSGMII_CALB_NUM 100 -+#define MII_QCA8075_SSTATUS 0x11 -+#define QCA8075_PHY_SPEC_STATUS_LINK BIT(10) -+#define QCA8075_MMD7_CRC_AND_PKTS_COUNT 0x8029 -+#define QCA8075_MMD7_PKT_GEN_PKT_NUMB 0x8021 -+#define QCA8075_MMD7_PKT_GEN_PKT_SIZE 0x8062 -+#define QCA8075_MMD7_PKT_GEN_CTRL 0x8020 -+#define QCA8075_MMD7_CNT_SELFCLR BIT(1) -+#define QCA8075_MMD7_CNT_FRAME_CHK_EN BIT(0) -+#define QCA8075_MMD7_PKT_GEN_START BIT(13) -+#define QCA8075_MMD7_PKT_GEN_INPROGR BIT(15) -+#define QCA8075_MMD7_IG_FRAME_RECV_CNT_HI 0x802a -+#define QCA8075_MMD7_IG_FRAME_RECV_CNT_LO 0x802b -+#define QCA8075_MMD7_IG_FRAME_ERR_CNT 0x802c -+#define QCA8075_MMD7_EG_FRAME_RECV_CNT_HI 0x802d -+#define QCA8075_MMD7_EG_FRAME_RECV_CNT_LO 0x802e -+#define QCA8075_MMD7_EG_FRAME_ERR_CNT 0x802f -+#define QCA8075_MMD7_MDIO_BRDCST_WRITE 0x8028 -+#define QCA8075_MMD7_MDIO_BRDCST_WRITE_EN BIT(15) -+#define QCA8075_MDIO_BRDCST_PHY_ADDR 0x1f -+#define QCA8075_PKT_GEN_PKTS_COUNT 4096 -+ - enum { - QCA8K_PORT_SPEED_10M = 0, - QCA8K_PORT_SPEED_100M = 1, -@@ -466,6 +518,10 @@ struct qca8k_priv { - struct qca8k_pcs pcs_port_6; - const struct qca8k_match_data *info; - struct qca8k_led ports_led[QCA8K_LED_COUNT]; -+ /* IPQ4019 specific */ -+ struct regmap *psgmii; -+ struct phy_device *psgmii_ethphy; -+ bool psgmii_calibrated; - }; - - struct qca8k_mib_desc { diff --git a/target/linux/ipq40xx/patches-6.1/707-arm-dts-ipq4019-add-switch-node.patch b/target/linux/ipq40xx/patches-6.1/707-arm-dts-ipq4019-add-switch-node.patch deleted file mode 100644 index e7203a3ac9..0000000000 --- a/target/linux/ipq40xx/patches-6.1/707-arm-dts-ipq4019-add-switch-node.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 19c507c3fe4a6fc60317dcae2c55de452aecb7d5 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Mon, 1 Nov 2021 18:15:04 +0100 -Subject: [PATCH] arm: dts: ipq4019: add switch node - -Since the built-in IPQ40xx switch now has a driver, add the required node -for it to work. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 76 +++++++++++++++++++++++++++++ - 1 file changed, 76 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -594,6 +594,82 @@ - status = "disabled"; - }; - -+ switch: switch@c000000 { -+ compatible = "qca,ipq4019-qca8337n"; -+ reg = <0xc000000 0x80000>, <0x98000 0x800>; -+ reg-names = "base", "psgmii_phy"; -+ resets = <&gcc ESS_PSGMII_ARES>; -+ reset-names = "psgmii_rst"; -+ mdio = <&mdio>; -+ psgmii-ethphy = <&psgmiiphy>; -+ -+ status = "disabled"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { /* MAC0 */ -+ reg = <0>; -+ label = "cpu"; -+ ethernet = <&gmac>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ asym-pause; -+ }; -+ }; -+ -+ swport1: port@1 { /* MAC1 */ -+ reg = <1>; -+ label = "lan1"; -+ phy-handle = <ðphy0>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport2: port@2 { /* MAC2 */ -+ reg = <2>; -+ label = "lan2"; -+ phy-handle = <ðphy1>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport3: port@3 { /* MAC3 */ -+ reg = <3>; -+ label = "lan3"; -+ phy-handle = <ðphy2>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport4: port@4 { /* MAC4 */ -+ reg = <4>; -+ label = "lan4"; -+ phy-handle = <ðphy3>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport5: port@5 { /* MAC5 */ -+ reg = <5>; -+ label = "wan"; -+ phy-handle = <ðphy4>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ - gmac: ethernet@c080000 { - compatible = "qcom,ipq4019-ess-edma"; - reg = <0xc080000 0x8000>; diff --git a/target/linux/ipq40xx/patches-6.1/709-ARM-dts-qcom-ipq4019-add-QCA8075-PHY-Package-nodes.patch b/target/linux/ipq40xx/patches-6.1/709-ARM-dts-qcom-ipq4019-add-QCA8075-PHY-Package-nodes.patch deleted file mode 100644 index e8b89647ce..0000000000 --- a/target/linux/ipq40xx/patches-6.1/709-ARM-dts-qcom-ipq4019-add-QCA8075-PHY-Package-nodes.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 5ac078c8fe18f3e8318547b8ed0ed782730c5039 Mon Sep 17 00:00:00 2001 -From: Christian Marangi <ansuelsmth@gmail.com> -Date: Sat, 10 Feb 2024 22:28:27 +0100 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes - -Add QCA8075 PHY Package nodes. The PHY nodes that were previously -defined never worked and actually never had a driver to correctly setup -these PHY. Now that we have a correct driver, correctly add the PHY -Package node and set the default value of 300mw for tx driver strength -following specification of ipq4019 SoC. - -Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> ---- - arch/arm/boot/dts//qcom-ipq4019.dtsi | 35 +++++++++++++++--------- - 1 file changed, 22 insertions(+), 13 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -725,24 +725,33 @@ - reg = <0x90000 0x64>; - status = "disabled"; - -- ethphy0: ethernet-phy@0 { -+ ethernet-phy-package@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,qca8075-package"; - reg = <0>; -- }; -- -- ethphy1: ethernet-phy@1 { -- reg = <1>; -- }; - -- ethphy2: ethernet-phy@2 { -- reg = <2>; -- }; -- -- ethphy3: ethernet-phy@3 { -- reg = <3>; -- }; -+ qcom,tx-drive-strength-milliwatt = <300>; - -- ethphy4: ethernet-phy@4 { -- reg = <4>; -+ ethphy0: ethernet-phy@0 { -+ reg = <0>; -+ }; -+ -+ ethphy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ ethphy2: ethernet-phy@2 { -+ reg = <2>; -+ }; -+ -+ ethphy3: ethernet-phy@3 { -+ reg = <3>; -+ }; -+ -+ ethphy4: ethernet-phy@4 { -+ reg = <4>; -+ }; - }; - }; - diff --git a/target/linux/ipq40xx/patches-6.1/710-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-6.1/710-arm-dts-ipq4019-QCA807x-properties.patch deleted file mode 100644 index a9ba70ff2f..0000000000 --- a/target/linux/ipq40xx/patches-6.1/710-arm-dts-ipq4019-QCA807x-properties.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 79b38b9f85da868ca59b66715c20aa55104b640b Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Fri, 2 Oct 2020 10:43:26 +0200 -Subject: [PATCH] arm: dts: ipq4019: QCA807x properties - -This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -752,6 +752,10 @@ - ethphy4: ethernet-phy@4 { - reg = <4>; - }; -+ -+ psgmiiphy: psgmii-phy@5 { -+ reg = <5>; -+ }; - }; - }; - diff --git a/target/linux/ipq40xx/patches-6.1/711-net-qualcomm-ipqess-fix-TX-timeout-errors.patch b/target/linux/ipq40xx/patches-6.1/711-net-qualcomm-ipqess-fix-TX-timeout-errors.patch deleted file mode 100644 index 149208aa69..0000000000 --- a/target/linux/ipq40xx/patches-6.1/711-net-qualcomm-ipqess-fix-TX-timeout-errors.patch +++ /dev/null @@ -1,64 +0,0 @@ -From d0055b03d9c8d48ad2b971821989b09ba95c39f8 Mon Sep 17 00:00:00 2001 -From: Christian Marangi <ansuelsmth@gmail.com> -Date: Sun, 17 Sep 2023 20:18:31 +0200 -Subject: [PATCH] net: qualcomm: ipqess: fix TX timeout errors - -Currently logic to handle napi tx completion is flawed and on the long -run on loaded condition cause TX timeout error with the queue not being -able to handle any new packet. - -There are 2 main cause of this: -- incrementing the packet done value wrongly -- handling 2 times the tx_ring tail - -ipqess_tx_unmap_and_free may return 2 kind values: -- 0: we are handling first and middle descriptor for the packet -- packet len: we are at the last descriptor for the packet - -Done value was wrongly incremented also for first and intermediate -descriptor for the packet resulting causing panic and TX timeouts by -comunicating to the kernel an inconsistent value of packet handling not -matching the expected ones. - -Tx_ring tail was handled twice for ipqess_tx_complete run resulting in -again done value incremented wrongly and also problem with idx handling -by actually skipping descriptor for some packets. - -Rework the loop logic to fix these 2 problem and also add some comments -to make sure ipqess_tx_unmap_and_free ret value is better -understandable. - -Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> ---- - drivers/net/ethernet/qualcomm/ipqess/ipqess.c | 13 ++++++++++--- - 1 file changed, 10 insertions(+), 3 deletions(-) - ---- a/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess.c -@@ -453,13 +453,22 @@ static int ipqess_tx_complete(struct ipq - tail >>= IPQESS_TPD_CONS_IDX_SHIFT; - tail &= IPQESS_TPD_CONS_IDX_MASK; - -- do { -+ while ((tx_ring->tail != tail) && (done < budget)) { - ret = ipqess_tx_unmap_and_free(&tx_ring->ess->pdev->dev, - &tx_ring->buf[tx_ring->tail]); -- tx_ring->tail = IPQESS_NEXT_IDX(tx_ring->tail, tx_ring->count); -+ /* ipqess_tx_unmap_and_free may return 2 kind values: -+ * - 0: we are handling first and middle descriptor for the packet -+ * - packet len: we are at the last descriptor for the packet -+ * Increment total bytes handled and packet done only if we are -+ * handling the last descriptor for the packet. -+ */ -+ if (ret) { -+ total += ret; -+ done++; -+ } - -- total += ret; -- } while ((++done < budget) && (tx_ring->tail != tail)); -+ tx_ring->tail = IPQESS_NEXT_IDX(tx_ring->tail, tx_ring->count); -+ }; - - ipqess_w32(tx_ring->ess, IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx), - tx_ring->tail); diff --git a/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 6afb27b178..0000000000 --- a/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,175 +0,0 @@ -From: Christian Lamparter <chunkeey@googlemail.com> -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -248,4 +248,11 @@ config QCOM_ICC_BWMON - the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high - memory throughput even with lower CPU frequencies. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - endmenu ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -29,3 +29,4 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o - obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o - obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o - obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/of_platform.h> -+#include <linux/platform_device.h> -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+#define TCSR_USB_HSPHY_CONFIG 0xC -+ -+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 -+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf -+ -+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 -+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 -+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { -+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); -+ writel(val, base + TCSR_USB_HSPHY_CONFIG); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { -+ u32 tmp = 0; -+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); -+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); -+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); -+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { -+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); -+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); -+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { -+ dev_info(&pdev->dev, -+ "setting wifi_noc_memtype_m0_m2 = %x\n", val); -+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,48 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* IPQ40xx HS PHY Mode Select */ -+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 -+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 -+ -+/* IPQ40xx ess interface mode select */ -+#define TCSR_ESS_PSGMII 0 -+#define TCSR_ESS_PSGMII_RGMII5 1 -+#define TCSR_ESS_PSGMII_RMII0 2 -+#define TCSR_ESS_PSGMII_RMII1 4 -+#define TCSR_ESS_PSGMII_RMII0_RMII1 6 -+#define TCSR_ESS_PSGMII_RGMII4 9 -+ -+/* -+ * IPQ40xx WiFi Global Config -+ * Bit 30:AXID_EN -+ * Enable AXI master bus Axid translating to confirm all txn submitted by order -+ * Bit 24: Use locally generated socslv_wxi_bvalid -+ * 1: use locally generate socslv_wxi_bvalid for performance. -+ * 0: use SNOC socslv_wxi_bvalid. -+ */ -+#define TCSR_WIFI_GLB_CFG 0x41000000 -+ -+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ -+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch b/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch deleted file mode 100644 index c73e40429c..0000000000 --- a/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch +++ /dev/null @@ -1,27 +0,0 @@ -From c668fd2c4d9ad4a510fd214a2da83bd9b67a2508 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robimarko@gmail.com> -Date: Sun, 13 Aug 2023 18:13:08 +0200 -Subject: [PATCH] Revert "firmware: qcom_scm: Clear download bit during reboot" - -This reverts commit a3ea89b5978dbcd0fa55f675c5a1e04611093709. - -It is breaking reboot on IPQ4019 boards, so revert until a proper fix -is found. - -Signed-off-by: Robert Marko <robimarko@gmail.com> ---- - drivers/firmware/qcom_scm.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -1466,7 +1466,8 @@ static int qcom_scm_probe(struct platfor - static void qcom_scm_shutdown(struct platform_device *pdev) - { - /* Clean shutdown, disable download mode to allow normal restart */ -- qcom_scm_set_download_mode(false); -+ if (download_mode) -+ qcom_scm_set_download_mode(false); - } - - static const struct of_device_id qcom_scm_dt_match[] = { diff --git a/target/linux/ipq40xx/patches-6.1/998-lantiq-atm-hacks.patch b/target/linux/ipq40xx/patches-6.1/998-lantiq-atm-hacks.patch deleted file mode 100644 index c15a4b3ae3..0000000000 --- a/target/linux/ipq40xx/patches-6.1/998-lantiq-atm-hacks.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: John Crispin <blogic@openwrt.org> -Date: Fri, 3 Aug 2012 10:27:25 +0200 -Subject: [PATCH 04/36] MIPS: lantiq: add atm hack - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- a/include/uapi/linux/atm.h -+++ b/include/uapi/linux/atm.h -@@ -131,8 +131,14 @@ - #define ATM_ABR 4 - #define ATM_ANYCLASS 5 /* compatible with everything */ - -+#define ATM_VBR_NRT ATM_VBR -+#define ATM_VBR_RT 6 -+#define ATM_UBR_PLUS 7 -+#define ATM_GFR 8 -+ - #define ATM_MAX_PCR -1 /* maximum available PCR */ - -+ - struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ -@@ -155,6 +161,9 @@ struct atm_trafprm { - unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ - unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ - unsigned int spare :9; /* spare bits */ -+ int scr; /* sustained rate in cells per second */ -+ int mbs; /* maximum burst size (MBS) in cells */ -+ int cdv; /* Cell delay variation */ - }; - - struct atm_qos { ---- a/net/atm/proc.c -+++ b/net/atm/proc.c -@@ -141,7 +141,7 @@ static void *vcc_seq_next(struct seq_fil - static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) - { - static const char *const class_name[] = { -- "off", "UBR", "CBR", "VBR", "ABR"}; -+ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"}; - static const char *const aal_name[] = { - "---", "1", "2", "3/4", /* 0- 3 */ - "???", "5", "???", "???", /* 4- 7 */ diff --git a/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch b/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch deleted file mode 100644 index 3d5b7afe8c..0000000000 --- a/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch +++ /dev/null @@ -1,137 +0,0 @@ -From: Subhra Banerjee <subhrax.banerjee@intel.com> -Date: Fri, 31 Aug 2018 12:01:19 +0530 -Subject: [PATCH] UGW_SW-29163: ATM oam support - ---- a/drivers/net/ppp/ppp_generic.c -+++ b/drivers/net/ppp/ppp_generic.c -@@ -2953,6 +2953,22 @@ char *ppp_dev_name(struct ppp_channel *c - return name; - } - -+/* -+ * Return the PPP device interface pointer -+ */ -+struct net_device *ppp_device(struct ppp_channel *chan) -+{ -+ struct channel *pch = chan->ppp; -+ struct net_device *dev = NULL; -+ -+ if (pch) { -+ read_lock_bh(&pch->upl); -+ if (pch->ppp && pch->ppp->dev) -+ dev = pch->ppp->dev; -+ read_unlock_bh(&pch->upl); -+ } -+ return dev; -+} - - /* - * Disconnect a channel from the generic layer. -@@ -3599,6 +3615,7 @@ EXPORT_SYMBOL(ppp_unregister_channel); - EXPORT_SYMBOL(ppp_channel_index); - EXPORT_SYMBOL(ppp_unit_number); - EXPORT_SYMBOL(ppp_dev_name); -+EXPORT_SYMBOL(ppp_device); - EXPORT_SYMBOL(ppp_input); - EXPORT_SYMBOL(ppp_input_error); - EXPORT_SYMBOL(ppp_output_wakeup); ---- a/include/linux/ppp_channel.h -+++ b/include/linux/ppp_channel.h -@@ -76,6 +76,9 @@ extern int ppp_unit_number(struct ppp_ch - /* Get the device name associated with a channel, or NULL if none */ - extern char *ppp_dev_name(struct ppp_channel *); - -+/* Get the device pointer associated with a channel, or NULL if none */ -+extern struct net_device *ppp_device(struct ppp_channel *); -+ - /* - * SMP locking notes: - * The channel code must ensure that when it calls ppp_unregister_channel, ---- a/net/atm/Kconfig -+++ b/net/atm/Kconfig -@@ -56,6 +56,12 @@ config ATM_MPOA - subnetwork boundaries. These shortcut connections bypass routers - enhancing overall network performance. - -+config ATM_MPOA_INTEL_DSL_PHY_SUPPORT -+ bool "Intel DSL Phy MPOA support" -+ depends on ATM && INET && ATM_MPOA!=n -+ help -+ Add support for Intel DSL Phy ATM MPOA -+ - config ATM_BR2684 - tristate "RFC1483/2684 Bridged protocols" - depends on ATM && INET ---- a/net/atm/br2684.c -+++ b/net/atm/br2684.c -@@ -598,6 +598,11 @@ static int br2684_regvcc(struct atm_vcc - atmvcc->push = br2684_push; - atmvcc->pop = br2684_pop; - atmvcc->release_cb = br2684_release_cb; -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+ if (atm_hook_mpoa_setup) /* IPoA or EoA w/o FCS */ -+ atm_hook_mpoa_setup(atmvcc, brdev->payload == p_routed ? 3 : 0, -+ brvcc->encaps == BR2684_ENCAPS_LLC ? 1 : 0, net_dev); -+#endif - atmvcc->owner = THIS_MODULE; - - /* initialize netdev carrier state */ ---- a/net/atm/common.c -+++ b/net/atm/common.c -@@ -137,6 +137,11 @@ static struct proto vcc_proto = { - .release_cb = vcc_release_cb, - }; - -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+void (*atm_hook_mpoa_setup)(struct atm_vcc *, int, int, struct net_device *) = NULL; -+EXPORT_SYMBOL(atm_hook_mpoa_setup); -+#endif -+ - int vcc_create(struct net *net, struct socket *sock, int protocol, int family, int kern) - { - struct sock *sk; ---- a/net/atm/common.h -+++ b/net/atm/common.h -@@ -53,4 +53,6 @@ int svc_change_qos(struct atm_vcc *vcc,s - - void atm_dev_release_vccs(struct atm_dev *dev); - -+extern void (*atm_hook_mpoa_setup)(struct atm_vcc *, int, int, struct net_device *); -+ - #endif ---- a/net/atm/mpc.c -+++ b/net/atm/mpc.c -@@ -31,6 +31,7 @@ - /* Modular too */ - #include <linux/module.h> - -+#include "common.h" - #include "lec.h" - #include "mpc.h" - #include "resources.h" -@@ -645,6 +646,10 @@ static int atm_mpoa_vcc_attach(struct at - vcc->proto_data = mpc->dev; - vcc->push = mpc_push; - -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+ if (atm_hook_mpoa_setup) /* IPoA, LLC */ -+ atm_hook_mpoa_setup(vcc, 3, 1, mpc->dev); -+#endif - return 0; - } - ---- a/net/atm/pppoatm.c -+++ b/net/atm/pppoatm.c -@@ -422,6 +422,12 @@ static int pppoatm_assign_vcc(struct atm - atmvcc->user_back = pvcc; - atmvcc->push = pppoatm_push; - atmvcc->pop = pppoatm_pop; -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+ if (atm_hook_mpoa_setup) /* PPPoA */ -+ atm_hook_mpoa_setup(atmvcc, 2, -+ pvcc->encaps == e_llc ? 1 : 0, -+ ppp_device(&pvcc->chan)); -+#endif - atmvcc->release_cb = pppoatm_release_cb; - __module_get(THIS_MODULE); - atmvcc->owner = THIS_MODULE; |