diff options
Diffstat (limited to 'target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch')
| -rw-r--r-- | target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch b/target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch new file mode 100644 index 0000000000..4081a82d52 --- /dev/null +++ b/target/linux/sunxi/patches-6.1/006-v6.6-arm64-dts-allwinner-h616-Add-OrangePi-Zero-3-board.patch @@ -0,0 +1,140 @@ +From f1b3ddb3ecc2eec1f912383e01156c226daacfab Mon Sep 17 00:00:00 2001 +From: Andre Przywara <andre.przywara@arm.com> +Date: Fri, 4 Aug 2023 18:08:56 +0100 +Subject: [PATCH] arm64: dts: allwinner: h616: Add OrangePi Zero 3 board + support + +The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC, +which seems to be just an H616 with more L2 cache. The board itself is a +slightly updated version of the Orange Pi Zero 2. It features: +- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU +- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2) +- AXP313a PMIC (more capable AXP305 on the Zero2) +- Raspberry-Pi-1 compatible GPIO header +- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports +- 1 USB 2.0 host port +- 1 USB 2.0 type C port (power supply + OTG) +- MicroSD slot +- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2) +- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2) +- micro-HDMI port +- (yet) unsupported Allwinner WiFi/BT chip + +Add the devicetree file describing the currently supported features, +namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at +the moment, though the basic functionality works. + +Signed-off-by: Andre Przywara <andre.przywara@arm.com> +Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> +Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com +Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> +--- + arch/arm64/boot/dts/allwinner/Makefile | 1 + + .../allwinner/sun50i-h618-orangepi-zero3.dts | 94 +++++++++++++++++++ + 2 files changed, 95 insertions(+) + create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts + +--- a/arch/arm64/boot/dts/allwinner/Makefile ++++ b/arch/arm64/boot/dts/allwinner/Makefile +@@ -40,3 +40,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-ta + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb + dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb ++dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts +@@ -0,0 +1,94 @@ ++// SPDX-License-Identifier: (GPL-2.0+ or MIT) ++/* ++ * Copyright (C) 2023 Arm Ltd. ++ */ ++ ++/dts-v1/; ++ ++#include "sun50i-h616-orangepi-zero.dtsi" ++ ++/ { ++ model = "OrangePi Zero3"; ++ compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618"; ++}; ++ ++&emac0 { ++ phy-supply = <®_dldo1>; ++}; ++ ++&ext_rgmii_phy { ++ motorcomm,clk-out-frequency-hz = <125000000>; ++}; ++ ++&mmc0 { ++ /* ++ * The schematic shows the card detect pin wired up to PF6, via an ++ * inverter, but it just doesn't work. ++ */ ++ broken-cd; ++ vmmc-supply = <®_dldo1>; ++}; ++ ++&r_i2c { ++ status = "okay"; ++ ++ axp313: pmic@36 { ++ compatible = "x-powers,axp313a"; ++ reg = <0x36>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ interrupt-parent = <&pio>; ++ interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ ++ ++ vin1-supply = <®_vcc5v>; ++ vin2-supply = <®_vcc5v>; ++ vin3-supply = <®_vcc5v>; ++ ++ regulators { ++ /* Supplies VCC-PLL, so needs to be always on. */ ++ reg_aldo1: aldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-name = "vcc1v8"; ++ }; ++ ++ /* Supplies VCC-IO, so needs to be always on. */ ++ reg_dldo1: dldo1 { ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc3v3"; ++ }; ++ ++ reg_dcdc1: dcdc1 { ++ regulator-always-on; ++ regulator-min-microvolt = <810000>; ++ regulator-max-microvolt = <990000>; ++ regulator-name = "vdd-gpu-sys"; ++ }; ++ ++ reg_dcdc2: dcdc2 { ++ regulator-always-on; ++ regulator-min-microvolt = <810000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-cpu"; ++ }; ++ ++ reg_dcdc3: dcdc3 { ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1100000>; ++ regulator-name = "vdd-dram"; ++ }; ++ }; ++ }; ++}; ++ ++&pio { ++ vcc-pc-supply = <®_dldo1>; ++ vcc-pf-supply = <®_dldo1>; ++ vcc-pg-supply = <®_aldo1>; ++ vcc-ph-supply = <®_dldo1>; ++ vcc-pi-supply = <®_dldo1>; ++}; |