diff options
Diffstat (limited to 'target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch')
-rw-r--r-- | target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch | 305 |
1 files changed, 0 insertions, 305 deletions
diff --git a/target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch b/target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch deleted file mode 100644 index 0747e6a8e0..0000000000 --- a/target/linux/sunxi/patches-6.6/005-v6.6-arm64-dts-allwinner-h616-Split-Orange-Pi-Zero-2-DT.patch +++ /dev/null @@ -1,305 +0,0 @@ -From 322bf103204b8f786547acbeed85569254e7088f Mon Sep 17 00:00:00 2001 -From: Andre Przywara <andre.przywara@arm.com> -Date: Fri, 4 Aug 2023 18:08:54 +0100 -Subject: [PATCH] arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT - -The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some -DT nodes with the Zero 2, but comes with a different PMIC. - -Move the common parts (except the PMIC) into a new shared file, and -include that from the existing board .dts file. - -No functional change, the generated DTB is the same, except for some -phandle numbering differences. - -Signed-off-by: Andre Przywara <andre.przywara@arm.com> -Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> -Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com -Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> ---- - .../allwinner/sun50i-h616-orangepi-zero.dtsi | 134 ++++++++++++++++++ - .../allwinner/sun50i-h616-orangepi-zero2.dts | 119 +--------------- - 2 files changed, 135 insertions(+), 118 deletions(-) - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi - ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi -@@ -0,0 +1,134 @@ -+// SPDX-License-Identifier: (GPL-2.0+ or MIT) -+/* -+ * Copyright (C) 2020 Arm Ltd. -+ * -+ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3. -+ * Excludes PMIC nodes and properties, since they are different between the two. -+ */ -+ -+#include "sun50i-h616.dtsi" -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> -+#include <dt-bindings/leds/common.h> -+ -+/ { -+ aliases { -+ ethernet0 = &emac0; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led-0 { -+ function = LED_FUNCTION_POWER; -+ color = <LED_COLOR_ID_RED>; -+ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ -+ default-state = "on"; -+ }; -+ -+ led-1 { -+ function = LED_FUNCTION_STATUS; -+ color = <LED_COLOR_ID_GREEN>; -+ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ -+ }; -+ }; -+ -+ reg_vcc5v: vcc5v { -+ /* board wide 5V supply directly from the USB-C socket */ -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc-5v"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ }; -+ -+ reg_usb1_vbus: regulator-usb1-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb1-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ vin-supply = <®_vcc5v>; -+ enable-active-high; -+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ -+ }; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+/* USB 2 & 3 are on headers only. */ -+ -+&emac0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ext_rgmii_pins>; -+ phy-mode = "rgmii"; -+ phy-handle = <&ext_rgmii_phy>; -+ allwinner,rx-delay-ps = <3100>; -+ allwinner,tx-delay-ps = <700>; -+ status = "okay"; -+}; -+ -+&mdio0 { -+ ext_rgmii_phy: ethernet-phy@1 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <1>; -+ }; -+}; -+ -+&mmc0 { -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&spi0 { -+ status = "okay"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; -+ -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <40000000>; -+ }; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_ph_pins>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ /* -+ * PHY0 pins are connected to a USB-C socket, but a role switch -+ * is not implemented: both CC pins are pulled to GND. -+ * The VBUS pins power the device, so a fixed peripheral mode -+ * is the best choice. -+ * The board can be powered via GPIOs, in this case port0 *can* -+ * act as a host (with a cable/adapter ignoring CC), as VBUS is -+ * then provided by the GPIOs. Any user of this setup would -+ * need to adjust the DT accordingly: dr_mode set to "host", -+ * enabling OHCI0 and EHCI0. -+ */ -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ status = "okay"; -+}; ---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts -@@ -5,95 +5,19 @@ - - /dts-v1/; - --#include "sun50i-h616.dtsi" -- --#include <dt-bindings/gpio/gpio.h> --#include <dt-bindings/interrupt-controller/arm-gic.h> --#include <dt-bindings/leds/common.h> -+#include "sun50i-h616-orangepi-zero.dtsi" - - / { - model = "OrangePi Zero2"; - compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616"; -- -- aliases { -- ethernet0 = &emac0; -- serial0 = &uart0; -- }; -- -- chosen { -- stdout-path = "serial0:115200n8"; -- }; -- -- leds { -- compatible = "gpio-leds"; -- -- led-0 { -- function = LED_FUNCTION_POWER; -- color = <LED_COLOR_ID_RED>; -- gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */ -- default-state = "on"; -- }; -- -- led-1 { -- function = LED_FUNCTION_STATUS; -- color = <LED_COLOR_ID_GREEN>; -- gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ -- }; -- }; -- -- reg_vcc5v: vcc5v { -- /* board wide 5V supply directly from the USB-C socket */ -- compatible = "regulator-fixed"; -- regulator-name = "vcc-5v"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- regulator-always-on; -- }; -- -- reg_usb1_vbus: regulator-usb1-vbus { -- compatible = "regulator-fixed"; -- regulator-name = "usb1-vbus"; -- regulator-min-microvolt = <5000000>; -- regulator-max-microvolt = <5000000>; -- vin-supply = <®_vcc5v>; -- enable-active-high; -- gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */ -- }; --}; -- --&ehci1 { -- status = "okay"; - }; - --/* USB 2 & 3 are on headers only. */ -- - &emac0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&ext_rgmii_pins>; -- phy-mode = "rgmii"; -- phy-handle = <&ext_rgmii_phy>; - phy-supply = <®_dcdce>; -- allwinner,rx-delay-ps = <3100>; -- allwinner,tx-delay-ps = <700>; -- status = "okay"; --}; -- --&mdio0 { -- ext_rgmii_phy: ethernet-phy@1 { -- compatible = "ethernet-phy-ieee802.3-c22"; -- reg = <1>; -- }; - }; - - &mmc0 { - vmmc-supply = <®_dcdce>; -- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -- bus-width = <4>; -- status = "okay"; --}; -- --&ohci1 { -- status = "okay"; - }; - - &r_rsb { -@@ -211,44 +135,3 @@ - vcc-ph-supply = <®_aldo1>; - vcc-pi-supply = <®_aldo1>; - }; -- --&spi0 { -- status = "okay"; -- pinctrl-names = "default"; -- pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; -- -- flash@0 { -- #address-cells = <1>; -- #size-cells = <1>; -- compatible = "jedec,spi-nor"; -- reg = <0>; -- spi-max-frequency = <40000000>; -- }; --}; -- --&uart0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart0_ph_pins>; -- status = "okay"; --}; -- --&usbotg { -- /* -- * PHY0 pins are connected to a USB-C socket, but a role switch -- * is not implemented: both CC pins are pulled to GND. -- * The VBUS pins power the device, so a fixed peripheral mode -- * is the best choice. -- * The board can be powered via GPIOs, in this case port0 *can* -- * act as a host (with a cable/adapter ignoring CC), as VBUS is -- * then provided by the GPIOs. Any user of this setup would -- * need to adjust the DT accordingly: dr_mode set to "host", -- * enabling OHCI0 and EHCI0. -- */ -- dr_mode = "peripheral"; -- status = "okay"; --}; -- --&usbphy { -- usb1_vbus-supply = <®_usb1_vbus>; -- status = "okay"; --}; |