diff options
Diffstat (limited to 'target/linux')
17 files changed, 46 insertions, 449 deletions
diff --git a/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch index 51891c1f22..4939c56470 100644 --- a/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch +++ b/target/linux/ipq40xx/patches-6.1/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch @@ -22,7 +22,7 @@ Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au> --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S -@@ -624,6 +624,41 @@ not_relocated: mov r0, #0 +@@ -620,6 +620,41 @@ not_relocated: mov r0, #0 bic r4, r4, #1 blne cache_on diff --git a/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch index 3a3be91709..bf36164aed 100644 --- a/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch +++ b/target/linux/ipq40xx/patches-6.1/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch @@ -13,7 +13,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c -@@ -2447,7 +2447,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat +@@ -2451,7 +2451,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat static const struct sdhci_ops sdhci_msm_ops = { .reset = sdhci_msm_reset, diff --git a/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch b/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch index e4ee745ff1..732f3c50fb 100644 --- a/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch +++ b/target/linux/ipq40xx/patches-6.1/420-firmware-qcom-scm-Add-SDI-disable-support.patch @@ -18,7 +18,7 @@ Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -389,6 +389,29 @@ int qcom_scm_set_remote_state(u32 state, +@@ -400,6 +400,29 @@ int qcom_scm_set_remote_state(u32 state, } EXPORT_SYMBOL(qcom_scm_set_remote_state); @@ -56,5 +56,5 @@ Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> #define QCOM_SCM_BOOT_TERMINATE_PC 0x02 +#define QCOM_SCM_BOOT_SDI_CONFIG 0x09 #define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10 + #define QCOM_SCM_BOOT_SET_ADDR_MC 0x11 #define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a - #define QCOM_SCM_FLUSH_FLAG_MASK 0x3 diff --git a/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch b/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch index 98f02934a9..ff788c5c56 100644 --- a/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch +++ b/target/linux/ipq40xx/patches-6.1/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch @@ -18,7 +18,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com> --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -1337,6 +1337,13 @@ static int qcom_scm_probe(struct platfor +@@ -1435,6 +1435,13 @@ static int qcom_scm_probe(struct platfor if (download_mode) qcom_scm_set_download_mode(true); diff --git a/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch b/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch index a31ea69e89..a92342215e 100644 --- a/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch +++ b/target/linux/ipq40xx/patches-6.1/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch @@ -53,7 +53,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com> /** * scm_legacy_call() - Sends a command to the SCM and waits for the command to * finish processing. -@@ -160,10 +182,16 @@ int scm_legacy_call(struct device *dev, +@@ -163,10 +185,16 @@ int scm_legacy_call(struct device *dev, rsp = scm_legacy_command_to_response(cmd); @@ -74,7 +74,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com> } smc.args[0] = 1; -@@ -179,13 +207,26 @@ int scm_legacy_call(struct device *dev, +@@ -182,13 +210,26 @@ int scm_legacy_call(struct device *dev, goto out; do { @@ -106,7 +106,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com> if (res) { res_buf = scm_legacy_get_response_buffer(rsp); -@@ -193,7 +234,8 @@ int scm_legacy_call(struct device *dev, +@@ -196,7 +237,8 @@ int scm_legacy_call(struct device *dev, res->result[i] = le32_to_cpu(res_buf[i]); } out: @@ -118,7 +118,7 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com> } --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -344,6 +344,17 @@ int qcom_scm_set_cold_boot_addr(void *en +@@ -305,6 +305,17 @@ static int qcom_scm_set_boot_addr(void * desc.args[0] = flags; desc.args[1] = virt_to_phys(entry); @@ -135,4 +135,4 @@ Signed-off-by: Brian Norris <computersforpeace@gmail.com> + return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); } - EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); + diff --git a/target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch b/target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch deleted file mode 100644 index 385364c076..0000000000 --- a/target/linux/ipq40xx/patches-6.1/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch +++ /dev/null @@ -1,43 +0,0 @@ -From da75807ac41175e9db8c95f7a172b4133763b744 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <j4g8y7@gmail.com> -Date: Mon, 11 Jan 2021 17:49:36 +0100 -Subject: [PATCH] skbuff: add DSA specific data to struct skb_shared_info - -All of the already existing DSA tagging protocol drivers -are storing the tagging data directly into the skb. In most -cases that is the only way to send the required information -to the underlying ethernet switch. - -However on certain platforms (like the Qualcomm IPQ40xx -SoCs) the built-in ethernet switch is connected directly -to an ethernet MAC, and the tagging information must be -sent out-of-band which is done directly via the hardware -TX descriptors of the ethernet MAC. - -In such cases, putting the information into the skb causes -unneccesary overhead, because the ethernet driver must -remove that before sending the ethernet frame towards to -the hardware. - -This change adds two new DSA specific fields to struct -skb_shared_info which makes it possible to send the -tagging information via skb->shinfo. With this approach, -the twofold modifications of the skb data can be avoided. - -Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> ---- - include/linux/skbuff.h | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -564,6 +564,9 @@ struct skb_shared_info { - unsigned int gso_type; - u32 tskey; - -+ unsigned int dsa_tag_proto; -+ unsigned char dsa_tag_data[8]; -+ - /* - * Warning : all fields before dataref are cleared in __alloc_skb() - */ diff --git a/target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch b/target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch deleted file mode 100644 index 74079d68a1..0000000000 --- a/target/linux/ipq40xx/patches-6.1/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 29a0c2fae991cab142575c92276c0afdeb260ebe Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <j4g8y7@gmail.com> -Date: Thu, 28 Oct 2021 21:44:52 +0200 -Subject: [PATCH] net: dsa: tag_ipq4019: add shinfo based tagging driver for - IPQ40xx - -This change adds a tagging protocol driver for the built-in -ethernet switch of the Qualcomm Atheros IPQ4019 SoCs. - -In comparison to the existing tagging protocols this hardware -requires a slightly different approach because the switch does -not use in-band tags. - -On the receive path, the source port information is embedded -into the RX descriptors of the ethernet MAC hardware. Similarly, -the destination port mask must be sent via the TX descriptors -of the ethernet MAC when a packet is sent towards the switch. - -In order to support this special requirements, this patch -adds a new tagging protocol driver. - -The driver extracts the source port information directly -from the 'receive return descriptor' of the ethernet MAC. -It is possible because that descriptor is part of the skb -received from the ethernet driver. - -Unfortunatley, it is not possible to put the destination -port information directly to the TX descriptors, because -those are handled internally by the driver of the ethernet -hardware. - -To overcome this limitation, this tagging driver uses the -DSA specific fields in skb->shinfo to send the destination -port information to the ethernet driver. - -A similar tagging driver is exist but that uses skb -extensions which causes unnecessary overhead. - -Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> ---- - include/linux/dsa/ipq4019.h | 11 ++++++ - include/net/dsa.h | 2 + - net/dsa/Kconfig | 6 +++ - net/dsa/Makefile | 1 + - net/dsa/tag_ipq4019.c | 79 +++++++++++++++++++++++++++++++++++++ - 5 files changed, 99 insertions(+) - create mode 100644 include/linux/dsa/ipq4019.h - create mode 100644 net/dsa/tag_ipq4019.c - ---- /dev/null -+++ b/include/linux/dsa/ipq4019.h -@@ -0,0 +1,11 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#ifndef DSA_IPQ40XX_H -+#define DSA_IPQ40XX_H -+ -+struct ipq40xx_dsa_tag_data { -+ u8 from_cpu; -+ u8 dp; -+}; -+ -+#endif /* DSA_IPQ40XX_H */ ---- a/include/net/dsa.h -+++ b/include/net/dsa.h -@@ -51,6 +51,7 @@ struct phylink_link_state; - #define DSA_TAG_PROTO_SEVILLE_VALUE 21 - #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22 - #define DSA_TAG_PROTO_SJA1110_VALUE 23 -+#define DSA_TAG_PROTO_IPQ4019_VALUE 24 - - enum dsa_tag_protocol { - DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, -@@ -77,6 +78,7 @@ enum dsa_tag_protocol { - DSA_TAG_PROTO_OCELOT_8021Q = DSA_TAG_PROTO_OCELOT_8021Q_VALUE, - DSA_TAG_PROTO_SEVILLE = DSA_TAG_PROTO_SEVILLE_VALUE, - DSA_TAG_PROTO_SJA1110 = DSA_TAG_PROTO_SJA1110_VALUE, -+ DSA_TAG_PROTO_IPQ4019 = DSA_TAG_PROTO_IPQ4019_VALUE, - }; - - struct dsa_switch; ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -57,6 +57,12 @@ config NET_DSA_TAG_HELLCREEK - Say Y or M if you want to enable support for tagging frames - for the Hirschmann Hellcreek TSN switches. - -+config NET_DSA_TAG_IPQ4019 -+ tristate "Tag driver for Qualcomm Atheros IPQ4019 SoC built-in switch" -+ help -+ Say Y or M if you want to enable support for tagging frames for -+ the built-in switch of the Qualcomm Atheros IPQ4019 SoC-s. -+ - config NET_DSA_TAG_GSWIP - tristate "Tag driver for Lantiq / Intel GSWIP switches" - help ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_NET_DSA_TAG_AR9331) += tag_ - obj-$(CONFIG_NET_DSA_TAG_BRCM_COMMON) += tag_brcm.o - obj-$(CONFIG_NET_DSA_TAG_DSA_COMMON) += tag_dsa.o - obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o -+obj-$(CONFIG_NET_DSA_TAG_IPQ4019) += tag_ipq4019.o - obj-$(CONFIG_NET_DSA_TAG_HELLCREEK) += tag_hellcreek.o - obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o - obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o ---- /dev/null -+++ b/net/dsa/tag_ipq4019.c -@@ -0,0 +1,78 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+/* Copyright (c) 2021, Gabor Juhos <j4g8y7@gmail.com> */ -+ -+#include <linux/bitfield.h> -+#include <linux/dsa/ipq4019.h> -+ -+#include "dsa_priv.h" -+ -+/* Receive Return Descriptor */ -+struct edma_rrd { -+ u16 rrd0; -+ u16 rrd1; -+ u16 rrd2; -+ u16 rrd3; -+ u16 rrd4; -+ u16 rrd5; -+ u16 rrd6; -+ u16 rrd7; -+} __packed; -+ -+#define EDMA_RRD_SIZE sizeof(struct edma_rrd) -+ -+#define EDMA_RRD1_PORT_ID_MASK GENMASK(14, 12) -+ -+static struct sk_buff *ipq4019_sh_tag_xmit(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct dsa_port *dp = dsa_slave_to_port(dev); -+ struct ipq40xx_dsa_tag_data *tag_data; -+ -+ BUILD_BUG_ON(sizeof_field(struct skb_shared_info, dsa_tag_data) < -+ sizeof(struct ipq40xx_dsa_tag_data)); -+ -+ skb_shinfo(skb)->dsa_tag_proto = DSA_TAG_PROTO_IPQ4019; -+ tag_data = (struct ipq40xx_dsa_tag_data *)skb_shinfo(skb)->dsa_tag_data; -+ -+ tag_data->from_cpu = 1; -+ /* set the destination port information */ -+ tag_data->dp = BIT(dp->index); -+ -+ return skb; -+} -+ -+static struct sk_buff *ipq4019_sh_tag_rcv(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct edma_rrd *rrd; -+ int offset; -+ int port; -+ -+ offset = EDMA_RRD_SIZE + ETH_HLEN; -+ if (unlikely(skb_headroom(skb) < offset)) -+ return NULL; -+ -+ rrd = (struct edma_rrd *)(skb->data - offset); -+ port = FIELD_GET(EDMA_RRD1_PORT_ID_MASK, rrd->rrd1); -+ -+ skb->dev = dsa_master_find_slave(dev, 0, port); -+ if (!skb->dev) -+ return NULL; -+ -+ return skb; -+} -+ -+const struct dsa_device_ops ipq4019_sh_tag_dsa_ops = { -+ .name = "ipq4019-sh", -+ .proto = DSA_TAG_PROTO_IPQ4019, -+ .xmit = ipq4019_sh_tag_xmit, -+ .rcv = ipq4019_sh_tag_rcv, -+}; -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("DSA tag driver for the IPQ4019 SoC built-in ethernet switch"); -+MODULE_AUTHOR("Gabor Juhos <j4g8y7@gmail.com>"); -+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_IPQ4019); -+ -+module_dsa_tag_driver(ipq4019_sh_tag_dsa_ops); diff --git a/target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch b/target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch deleted file mode 100644 index 72e9345118..0000000000 --- a/target/linux/ipq40xx/patches-6.1/702-net-ethernet-qualcomm-add-IPQESS-support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 4f488235f498db43f2412116dea6e02c7fb20216 Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Mon, 1 Nov 2021 12:36:51 +0100 -Subject: [PATCH] net: ethernet: qualcomm: add IPQESS support - -Allow compiling the IPQESS driver that supports the -Qualcomm IPQ40xx SoC built-in ethernet controller. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - drivers/net/ethernet/qualcomm/Kconfig | 11 +++++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 12 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -60,6 +60,17 @@ config QCOM_EMAC - low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 - Precision Clock Synchronization Protocol. - -+config QCOM_IPQ4019_ESS_EDMA -+ tristate "Qualcomm Atheros IPQ4019 ESS EDMA support" -+ depends on OF -+ select PHYLINK -+ help -+ This driver supports the Qualcomm Atheros IPQ40xx built-in -+ ESS EDMA ethernet controller. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ipqess. -+ - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o - qcauart-objs := qca_uart.o - - obj-y += emac/ -+obj-y += ipqess/ - - obj-$(CONFIG_RMNET) += rmnet/ diff --git a/target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch b/target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch deleted file mode 100644 index 7fbf38a7e3..0000000000 --- a/target/linux/ipq40xx/patches-6.1/704-net-phy-define-PSGMII-PHY-interface-mode.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 157ac9f52fd9b9a22cf12f7755a905fb34ef72f7 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <j4g8y7@gmail.com> -Date: Fri, 25 Dec 2020 08:02:47 +0100 -Subject: [PATCH] net: phy: define PSGMII PHY interface mode - -The PSGMII interface is similar to QSGMII. The main difference -is that the PSGMII interface combines five SGMII lines into a -single link while in QSGMII only four lines are combined. - -Similarly to the QSGMII, this interface mode might also needs -special handling within the MAC driver. - -Add definitions for the PHY layer to allow to express this type -of connection between the MAC and PHY. - -Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> ---- - Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + - drivers/net/phy/phylink.c | 2 ++ - include/linux/phy.h | 3 +++ - 3 files changed, 6 insertions(+) - ---- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml -+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml -@@ -64,6 +64,7 @@ properties: - - mii - - gmii - - sgmii -+ - psgmii - - qsgmii - - tbi - - rev-mii ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -366,6 +366,7 @@ void phylink_get_linkmodes(unsigned long - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII: -+ case PHY_INTERFACE_MODE_PSGMII: - case PHY_INTERFACE_MODE_QSGMII: - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_GMII: -@@ -629,6 +630,7 @@ static int phylink_parse_mode(struct phy - - switch (pl->link_config.interface) { - case PHY_INTERFACE_MODE_SGMII: -+ case PHY_INTERFACE_MODE_PSGMII: - case PHY_INTERFACE_MODE_QSGMII: - phylink_set(pl->supported, 10baseT_Half); - phylink_set(pl->supported, 10baseT_Full); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -139,6 +139,7 @@ typedef enum { - PHY_INTERFACE_MODE_XGMII, - PHY_INTERFACE_MODE_XLGMII, - PHY_INTERFACE_MODE_MOCA, -+ PHY_INTERFACE_MODE_PSGMII, - PHY_INTERFACE_MODE_QSGMII, - PHY_INTERFACE_MODE_TRGMII, - PHY_INTERFACE_MODE_100BASEX, -@@ -244,6 +245,8 @@ static inline const char *phy_modes(phy_ - return "xlgmii"; - case PHY_INTERFACE_MODE_MOCA: - return "moca"; -+ case PHY_INTERFACE_MODE_PSGMII: -+ return "psgmii"; - case PHY_INTERFACE_MODE_QSGMII: - return "qsgmii"; - case PHY_INTERFACE_MODE_TRGMII: diff --git a/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch b/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch deleted file mode 100644 index 13b169e576..0000000000 --- a/target/linux/ipq40xx/patches-6.1/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch +++ /dev/null @@ -1,57 +0,0 @@ -From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001 -From: Robert Marko <robert.marko@sartura.hr> -Date: Mon, 1 Nov 2021 18:10:28 +0100 -Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support - -Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. - -It shares most of the stuff with its external counterpart, however it is -modified for the SoC. -Namely, it doesn't have second CPU port (Port 6), so it has 6 ports -instead of 7. -It also has no built-in PHY-s but rather requires external PSGMII based -companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry -out calibration before using them. -PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which -unfortunately requires some magic values as the datasheet doesnt document -the bits that are being set or the register at all. - -Since its built-in it is MMIO like other peripherals and doesn't have its -own MDIO bus but depends on the SoC provided one. - -CPU connection is at Port 0 and it uses some kind of a internal connection -and no traditional RGMII/SGMII. -It also doesn't use in-band tagging like other qca8k switches so a shinfo -based tagger is used. - -Signed-off-by: Robert Marko <robert.marko@sartura.hr> ---- - drivers/net/dsa/qca/Kconfig | 9 +++++++++ - drivers/net/dsa/qca/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/dsa/qca/Kconfig -+++ b/drivers/net/dsa/qca/Kconfig -@@ -23,3 +23,13 @@ config NET_DSA_QCA8K_LEDS_SUPPORT - help - This enabled support for LEDs present on the Qualcomm Atheros - QCA8K Ethernet switch chips. -+ -+config NET_DSA_QCA8K_IPQ4019 -+ tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support" -+ depends on HAS_IOMEM && NET_DSA -+ select NET_DSA_TAG_IPQ4019 -+ select REGMAP -+ help -+ This enables support for the Qualcomm Atheros IPQ4019 SoC built-in -+ Ethernet switch. -+ ---- a/drivers/net/dsa/qca/Makefile -+++ b/drivers/net/dsa/qca/Makefile -@@ -1,5 +1,6 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o -+obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o - obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o - qca8k-y += qca8k-common.o qca8k-8xxx.o - ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT diff --git a/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch b/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch index a231c7331b..b1a6a2bf34 100644 --- a/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch +++ b/target/linux/ipq40xx/patches-6.1/706-arm-dts-ipq4019-add-switch-node.patch @@ -1,4 +1,4 @@ -From ebb62523990a27b3a25e422fa575619f7f725a20 Mon Sep 17 00:00:00 2001 +From 8cbdb2526c3d7ba2e0c8c771773595f195135f54 Mon Sep 17 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Mon, 1 Nov 2021 18:15:04 +0100 Subject: [PATCH] arm: dts: ipq4019: add switch node @@ -8,12 +8,12 @@ for it to work. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 78 +++++++++++++++++++++++++++++ - 1 file changed, 78 insertions(+) + arch/arm/boot/dts/qcom-ipq4019.dtsi | 76 +++++++++++++++++++++++++++++ + 1 file changed, 76 insertions(+) --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -590,6 +590,82 @@ +@@ -591,6 +591,82 @@ status = "disabled"; }; diff --git a/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch b/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch index dfb8d692ab..e026b7550d 100644 --- a/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch +++ b/target/linux/ipq40xx/patches-6.1/707-dt-bindings-net-add-QCA807x-PHY.patch @@ -1,4 +1,4 @@ -From c66863c1ba8995b61e6d727d78a241c734f5bb57 Mon Sep 17 00:00:00 2001 +From dfba344da3657ee4d91e7ebd1217e93423d03624 Mon Sep 17 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Thu, 1 Oct 2020 15:05:35 +0200 Subject: [PATCH] dt-bindings: net: add QCA807x PHY diff --git a/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch b/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch index 6a92a103d6..dd2bb33c55 100644 --- a/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch +++ b/target/linux/ipq40xx/patches-6.1/708-net-phy-Add-Qualcom-QCA807x-driver.patch @@ -1,6 +1,6 @@ -From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001 +From 95179775debad6b0bdab241d4a305135fc5e67dc Mon Sep 17 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> -Date: Wed, 7 Oct 2020 17:38:48 +0200 +Date: Fri, 9 Sep 2022 23:44:42 +0200 Subject: [PATCH] net: phy: Add Qualcom QCA807x driver This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. @@ -19,32 +19,33 @@ These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- - drivers/net/phy/Kconfig | 6 ++++++ + drivers/net/phy/Kconfig | 7 +++++++ drivers/net/phy/Makefile | 1 + - 2 files changed, 7 insertions(+) + 2 files changed, 8 insertions(+) --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -347,6 +347,12 @@ config AT803X_PHY +@@ -362,6 +362,13 @@ config AT803X_PHY Currently supports the AR8030, AR8031, AR8033, AR8035 and internal QCA8337(Internal qca8k PHY) model +config QCA807X_PHY -+ tristate "Qualcomm QCA807X PHYs" ++ tristate "Qualcomm QCA807x PHYs" + depends on OF_MDIO + help -+ Currently supports the QCA8072 and QCA8075 models. ++ Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII ++ control PHY. + config QSEMI_PHY tristate "Quality Semiconductor PHYs" help --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -92,6 +92,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o +@@ -94,6 +94,7 @@ obj-$(CONFIG_MOTORCOMM_PHY) += motorcomm + obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp-c45-tja11xx.o obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o - obj-$(CONFIG_QSEMI_PHY) += qsemi.o +obj-$(CONFIG_QCA807X_PHY) += qca807x.o + obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_RENESAS_PHY) += uPD60620.o - obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o diff --git a/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch index cc4b44b393..5d8a9bf053 100644 --- a/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch +++ b/target/linux/ipq40xx/patches-6.1/709-arm-dts-ipq4019-QCA807x-properties.patch @@ -1,4 +1,4 @@ -From e0fa88eaa3c176b71e563da68949ac2ab45aaa61 Mon Sep 17 00:00:00 2001 +From 03ebcd291974e4ca5d77026111f63309bc708326 Mon Sep 17 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Fri, 2 Oct 2020 10:43:26 +0200 Subject: [PATCH] arm: dts: ipq4019: QCA807x properties @@ -7,8 +7,8 @@ This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) + arch/arm/boot/dts/qcom-ipq4019.dtsi | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr> / { #address-cells = <1>; -@@ -726,22 +727,38 @@ +@@ -724,22 +725,38 @@ ethphy0: ethernet-phy@0 { reg = <0>; diff --git a/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch index 9b44a4c885..6afb27b178 100644 --- a/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch +++ b/target/linux/ipq40xx/patches-6.1/850-soc-add-qualcomm-syscon.patch @@ -1,20 +1,10 @@ From: Christian Lamparter <chunkeey@googlemail.com> Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o - obj-$(CONFIG_QCOM_APR) += apr.o - obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o - obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig -@@ -192,6 +192,13 @@ config QCOM_SOCINFO - Say yes here to support the Qualcomm socinfo driver, providing - information about the SoC to user space. +@@ -248,4 +248,11 @@ config QCOM_ICC_BWMON + the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high + memory throughput even with lower CPU frequencies. +config QCOM_TCSR + tristate "QCOM Top Control and Status Registers" @@ -23,9 +13,14 @@ Subject: SoC: add qualcomm syscon + Say y here to enable TCSR support. The TCSR provides control + functions for various peripherals. + - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM || COMPILE_TEST + endmenu +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -29,3 +29,4 @@ obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o + obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o + obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o + obj-$(CONFIG_QCOM_ICC_BWMON) += icc-bwmon.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o --- /dev/null +++ b/drivers/soc/qcom/qcom_tcsr.c @@ -0,0 +1,98 @@ diff --git a/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch b/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch index b5b89b26f1..f08ff04137 100644 --- a/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch +++ b/target/linux/ipq40xx/patches-6.1/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch @@ -15,7 +15,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com> --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -1361,7 +1361,8 @@ static int qcom_scm_probe(struct platfor +@@ -1459,7 +1459,8 @@ static int qcom_scm_probe(struct platfor static void qcom_scm_shutdown(struct platform_device *pdev) { /* Clean shutdown, disable download mode to allow normal restart */ diff --git a/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch b/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch index b774fc39d8..3d5b7afe8c 100644 --- a/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch +++ b/target/linux/ipq40xx/patches-6.1/999-atm-mpoa-intel-dsl-phy-support.patch @@ -4,7 +4,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c -@@ -2952,6 +2952,22 @@ char *ppp_dev_name(struct ppp_channel *c +@@ -2953,6 +2953,22 @@ char *ppp_dev_name(struct ppp_channel *c return name; } @@ -27,7 +27,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support /* * Disconnect a channel from the generic layer. -@@ -3598,6 +3614,7 @@ EXPORT_SYMBOL(ppp_unregister_channel); +@@ -3599,6 +3615,7 @@ EXPORT_SYMBOL(ppp_unregister_channel); EXPORT_SYMBOL(ppp_channel_index); EXPORT_SYMBOL(ppp_unit_number); EXPORT_SYMBOL(ppp_dev_name); @@ -37,7 +37,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support EXPORT_SYMBOL(ppp_output_wakeup); --- a/include/linux/ppp_channel.h +++ b/include/linux/ppp_channel.h -@@ -74,6 +74,9 @@ extern int ppp_unit_number(struct ppp_ch +@@ -76,6 +76,9 @@ extern int ppp_unit_number(struct ppp_ch /* Get the device name associated with a channel, or NULL if none */ extern char *ppp_dev_name(struct ppp_channel *); @@ -64,7 +64,7 @@ Subject: [PATCH] UGW_SW-29163: ATM oam support depends on ATM && INET --- a/net/atm/br2684.c +++ b/net/atm/br2684.c -@@ -596,6 +596,11 @@ static int br2684_regvcc(struct atm_vcc +@@ -598,6 +598,11 @@ static int br2684_regvcc(struct atm_vcc atmvcc->push = br2684_push; atmvcc->pop = br2684_pop; atmvcc->release_cb = br2684_release_cb; |