diff options
Diffstat (limited to 'target')
6 files changed, 295 insertions, 1 deletions
diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network index 5c176d4963..b9ac2bb1ae 100644 --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network @@ -12,7 +12,8 @@ mvebu_setup_interfaces() local board="$1" case "$board" in - ctera,c200-v2) + ctera,c200-v2|\ + synology,ds213j) ucidef_set_interface_lan "eth0" "dhcp" ;; cznic,turris-omnia) diff --git a/target/linux/mvebu/cortexa9/config-5.15 b/target/linux/mvebu/cortexa9/config-5.15 index e666dd486f..266596d638 100644 --- a/target/linux/mvebu/cortexa9/config-5.15 +++ b/target/linux/mvebu/cortexa9/config-5.15 @@ -1,4 +1,7 @@ CONFIG_LED_TRIGGER_PHY=y CONFIG_MTD_SPLIT_SEIL_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_VIRT_CONCAT=y CONFIG_PHY_MVEBU_A38X_COMPHY=y +CONFIG_POWER_RESET_QNAP=y CONFIG_RTC_DRV_MV=y diff --git a/target/linux/mvebu/cortexa9/config-6.1 b/target/linux/mvebu/cortexa9/config-6.1 index b2625c3b32..7f825a806b 100644 --- a/target/linux/mvebu/cortexa9/config-6.1 +++ b/target/linux/mvebu/cortexa9/config-6.1 @@ -4,6 +4,9 @@ CONFIG_CURRENT_POINTER_IN_TPIDRURO=y CONFIG_IRQSTACKS=y CONFIG_LED_TRIGGER_PHY=y CONFIG_MTD_SPLIT_SEIL_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_MTD_VIRT_CONCAT=y CONFIG_PHY_MVEBU_A38X_COMPHY=y +CONFIG_POWER_RESET_QNAP=y CONFIG_RTC_DRV_MV=y CONFIG_THREAD_INFO_IN_TASK=y diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index 3234d62cd9..a49401d904 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -388,3 +388,22 @@ define Device/solidrun_clearfog-pro-a1 SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro endef TARGET_DEVICES += solidrun_clearfog-pro-a1 + +define Device/synology_ds213j + DEVICE_VENDOR := Synology + DEVICE_MODEL := DS213j + KERNEL_SIZE := 6912k + IMAGE_SIZE := 7168k + FILESYSTEMS := squashfs ubifs + KERNEL := kernel-bin | append-dtb | uImage none + KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none + DEVICE_DTS := armada-370-synology-ds213j + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ + check-size | append-metadata + DEVICE_PACKAGES := \ + kmod-rtc-s35390a kmod-hwmon-gpiofan kmod-hwmon-drivetemp \ + kmod-md-raid0 kmod-md-raid1 kmod-md-mod e2fsprogs mdadm \ + -ppp -kmod-nft-offload -firewall4 -dnsmasq -odhcpd-ipv6only +endef +TARGET_DEVICES += synology_ds213j diff --git a/target/linux/mvebu/patches-5.15/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch b/target/linux/mvebu/patches-5.15/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch new file mode 100644 index 0000000000..280fc5957e --- /dev/null +++ b/target/linux/mvebu/patches-5.15/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch @@ -0,0 +1,134 @@ +--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts ++++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts +@@ -31,6 +31,7 @@ + + chosen { + stdout-path = "serial0:115200n8"; ++ append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory@0 { +@@ -94,6 +95,8 @@ + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; ++ nvmem-cells = <&macaddr_vendor_0>; ++ nvmem-cell-names = "mac-address"; + }; + + sata@a0000 { +@@ -175,6 +178,24 @@ + gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; + }; + }; ++ ++ virtual_flash { ++ compatible = "mtd-concat"; ++ ++ devices = <&mtd_kernel &mtd_gap &mtd_gap2>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ compatible = "openwrt,uimage", "denx,uimage"; ++ label = "firmware"; ++ reg = <0x0 0x0>; ++ }; ++ }; ++ }; + }; + + &mdio { +@@ -265,48 +286,52 @@ + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + +- /* +- * Warning! +- * +- * Synology u-boot uses its compiled-in environment +- * and it seems Synology did not care to change u-boot +- * default configuration in order to allow saving a +- * modified environment at a sensible location. So, +- * if you do a 'saveenv' under u-boot, your modified +- * environment will be saved at 1MB after the start +- * of the flash, i.e. in the middle of the uImage. +- * For that reason, it is strongly advised not to +- * change the default environment, unless you know +- * what you are doing. +- */ +- partition@0 { /* u-boot */ +- label = "RedBoot"; +- reg = <0x00000000 0x000c0000>; /* 768KB */ +- }; ++ partitions { ++ compatible = "fixed-partitions"; + +- partition@c0000 { /* uImage */ +- label = "zImage"; +- reg = <0x000c0000 0x002d0000>; /* 2880KB */ +- }; ++ partition@0 { /* u-boot */ ++ label = "u-boot"; ++ reg = <0x00000000 0x000c0000>; /* 768KB */ ++ read-only; ++ }; + +- partition@390000 { /* uInitramfs */ +- label = "rd.gz"; +- reg = <0x00390000 0x00440000>; /* 4250KB */ +- }; ++ mtd_gap: partition@c0000 { /* gap */ ++ label = "gap"; ++ reg = <0x000c0000 0x00040000>; /* 256KB */ ++ }; + +- partition@7d0000 { /* MAC address and serial number */ +- label = "vendor"; +- reg = <0x007d0000 0x00010000>; /* 64KB */ +- }; ++ partition@100000 { /* u-boot-env */ ++ label = "u-boot-env"; ++ reg = <0x00100000 0x00010000>; /* 64KB */ ++ }; + +- partition@7e0000 { +- label = "RedBoot config"; +- reg = <0x007e0000 0x00010000>; /* 64KB */ +- }; ++ mtd_kernel: partition@110000 { ++ label = "kernel"; ++ reg = <0x00110000 0x006c0000>; /* 6912KB */ ++ }; + +- partition@7f0000 { +- label = "FIS directory"; +- reg = <0x007f0000 0x00010000>; /* 64KB */ ++ partition@7d0000 { /* MAC address and serial number */ ++ reg = <0x007d0000 0x00010000>; /* 64KB */ ++ label = "vendor"; ++ read-only; ++ ++ compatible = "nvmem-cells"; ++ ++ nvmem-layout { ++ compatible = "fixed-layout"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ macaddr_vendor_0: macaddr@0 { ++ reg = <0x0 0x6>; ++ }; ++ }; ++ }; ++ ++ mtd_gap2: partition@7e0000 { ++ label = "gap2"; ++ reg = <0x007e0000 0x00020000>; /* 128KB */ ++ }; + }; + }; + }; diff --git a/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch b/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch new file mode 100644 index 0000000000..280fc5957e --- /dev/null +++ b/target/linux/mvebu/patches-6.1/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch @@ -0,0 +1,134 @@ +--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts ++++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts +@@ -31,6 +31,7 @@ + + chosen { + stdout-path = "serial0:115200n8"; ++ append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory@0 { +@@ -94,6 +95,8 @@ + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; ++ nvmem-cells = <&macaddr_vendor_0>; ++ nvmem-cell-names = "mac-address"; + }; + + sata@a0000 { +@@ -175,6 +178,24 @@ + gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>; + }; + }; ++ ++ virtual_flash { ++ compatible = "mtd-concat"; ++ ++ devices = <&mtd_kernel &mtd_gap &mtd_gap2>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ compatible = "openwrt,uimage", "denx,uimage"; ++ label = "firmware"; ++ reg = <0x0 0x0>; ++ }; ++ }; ++ }; + }; + + &mdio { +@@ -265,48 +286,52 @@ + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + +- /* +- * Warning! +- * +- * Synology u-boot uses its compiled-in environment +- * and it seems Synology did not care to change u-boot +- * default configuration in order to allow saving a +- * modified environment at a sensible location. So, +- * if you do a 'saveenv' under u-boot, your modified +- * environment will be saved at 1MB after the start +- * of the flash, i.e. in the middle of the uImage. +- * For that reason, it is strongly advised not to +- * change the default environment, unless you know +- * what you are doing. +- */ +- partition@0 { /* u-boot */ +- label = "RedBoot"; +- reg = <0x00000000 0x000c0000>; /* 768KB */ +- }; ++ partitions { ++ compatible = "fixed-partitions"; + +- partition@c0000 { /* uImage */ +- label = "zImage"; +- reg = <0x000c0000 0x002d0000>; /* 2880KB */ +- }; ++ partition@0 { /* u-boot */ ++ label = "u-boot"; ++ reg = <0x00000000 0x000c0000>; /* 768KB */ ++ read-only; ++ }; + +- partition@390000 { /* uInitramfs */ +- label = "rd.gz"; +- reg = <0x00390000 0x00440000>; /* 4250KB */ +- }; ++ mtd_gap: partition@c0000 { /* gap */ ++ label = "gap"; ++ reg = <0x000c0000 0x00040000>; /* 256KB */ ++ }; + +- partition@7d0000 { /* MAC address and serial number */ +- label = "vendor"; +- reg = <0x007d0000 0x00010000>; /* 64KB */ +- }; ++ partition@100000 { /* u-boot-env */ ++ label = "u-boot-env"; ++ reg = <0x00100000 0x00010000>; /* 64KB */ ++ }; + +- partition@7e0000 { +- label = "RedBoot config"; +- reg = <0x007e0000 0x00010000>; /* 64KB */ +- }; ++ mtd_kernel: partition@110000 { ++ label = "kernel"; ++ reg = <0x00110000 0x006c0000>; /* 6912KB */ ++ }; + +- partition@7f0000 { +- label = "FIS directory"; +- reg = <0x007f0000 0x00010000>; /* 64KB */ ++ partition@7d0000 { /* MAC address and serial number */ ++ reg = <0x007d0000 0x00010000>; /* 64KB */ ++ label = "vendor"; ++ read-only; ++ ++ compatible = "nvmem-cells"; ++ ++ nvmem-layout { ++ compatible = "fixed-layout"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ macaddr_vendor_0: macaddr@0 { ++ reg = <0x0 0x6>; ++ }; ++ }; ++ }; ++ ++ mtd_gap2: partition@7e0000 { ++ label = "gap2"; ++ reg = <0x007e0000 0x00020000>; /* 128KB */ ++ }; + }; + }; + }; |