1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
|
From 712ad00d2f43814c81a7abfcbc339690a05fb6a0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Mon, 22 Apr 2024 10:15:09 +0300
Subject: [PATCH 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the
MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is
for MT7530 only. Add MT7530 prefix to the definition for bit 15.
Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT().
Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to
follow the naming on the "MT7621 Giga Switch Programming Guide v0.3",
"MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7
Generation Router Platform: Datasheet (Open Version) v0.1" documents.
These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along
with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN.
Remove PMCR_SPEED_MASK which doesn't have a use.
Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the
end for the mask that includes all force mode definitions.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 24 ++++++++---------
drivers/net/dsa/mt7530.h | 58 +++++++++++++++++++++-------------------
2 files changed, 42 insertions(+), 40 deletions(-)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -896,7 +896,7 @@ static void mt7530_setup_port5(struct ds
val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
/* Setup the MAC by default for the cpu port */
- mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
+ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
break;
case P5_INTF_SEL_GMAC5:
/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
@@ -2444,8 +2444,8 @@ mt7530_setup(struct dsa_switch *ds)
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
- PMCR_FORCE_MODE, PMCR_FORCE_MODE);
+ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+ MT7530_FORCE_MODE, MT7530_FORCE_MODE);
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2555,8 +2555,8 @@ mt7531_setup_common(struct dsa_switch *d
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
- mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
- MT7531_FORCE_MODE, MT7531_FORCE_MODE);
+ mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
+ MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2639,7 +2639,7 @@ mt7531_setup(struct dsa_switch *ds)
/* Force link down on all ports before internal reset */
for (i = 0; i < MT7530_NUM_PORTS; i++)
- mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
+ mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
/* Reset the switch through internal reset */
mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
@@ -2881,7 +2881,7 @@ mt753x_phylink_mac_config(struct phylink
/* Are we connected to external phy */
if (port == 5 && dsa_is_user_port(ds, 5))
- mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
+ mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
}
static void mt753x_phylink_mac_link_down(struct phylink_config *config,
@@ -2891,7 +2891,7 @@ static void mt753x_phylink_mac_link_down
struct dsa_port *dp = dsa_phylink_to_port(config);
struct mt7530_priv *priv = dp->ds->priv;
- mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
+ mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
}
static void mt753x_phylink_mac_link_up(struct phylink_config *config,
@@ -2905,7 +2905,7 @@ static void mt753x_phylink_mac_link_up(s
struct mt7530_priv *priv = dp->ds->priv;
u32 mcr;
- mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
+ mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
switch (speed) {
case SPEED_1000:
@@ -2920,9 +2920,9 @@ static void mt753x_phylink_mac_link_up(s
if (duplex == DUPLEX_FULL) {
mcr |= PMCR_FORCE_FDX;
if (tx_pause)
- mcr |= PMCR_TX_FC_EN;
+ mcr |= PMCR_FORCE_TX_FC_EN;
if (rx_pause)
- mcr |= PMCR_RX_FC_EN;
+ mcr |= PMCR_FORCE_RX_FC_EN;
}
if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
@@ -2937,7 +2937,7 @@ static void mt753x_phylink_mac_link_up(s
}
}
- mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
+ mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
}
static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -304,44 +304,46 @@ enum mt7530_vlan_port_acc_frm {
#define G0_PORT_VID_DEF G0_PORT_VID(0)
/* Register for port MAC control register */
-#define MT7530_PMCR_P(x) (0x3000 + ((x) * 0x100))
-#define PMCR_IFG_XMIT(x) (((x) & 0x3) << 18)
+#define MT753X_PMCR_P(x) (0x3000 + ((x) * 0x100))
+#define PMCR_IFG_XMIT_MASK GENMASK(19, 18)
+#define PMCR_IFG_XMIT(x) FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
#define PMCR_EXT_PHY BIT(17)
#define PMCR_MAC_MODE BIT(16)
-#define PMCR_FORCE_MODE BIT(15)
-#define PMCR_TX_EN BIT(14)
-#define PMCR_RX_EN BIT(13)
+#define MT7530_FORCE_MODE BIT(15)
+#define PMCR_MAC_TX_EN BIT(14)
+#define PMCR_MAC_RX_EN BIT(13)
#define PMCR_BACKOFF_EN BIT(9)
#define PMCR_BACKPR_EN BIT(8)
#define PMCR_FORCE_EEE1G BIT(7)
#define PMCR_FORCE_EEE100 BIT(6)
-#define PMCR_TX_FC_EN BIT(5)
-#define PMCR_RX_FC_EN BIT(4)
+#define PMCR_FORCE_RX_FC_EN BIT(5)
+#define PMCR_FORCE_TX_FC_EN BIT(4)
#define PMCR_FORCE_SPEED_1000 BIT(3)
#define PMCR_FORCE_SPEED_100 BIT(2)
#define PMCR_FORCE_FDX BIT(1)
#define PMCR_FORCE_LNK BIT(0)
-#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
- PMCR_FORCE_SPEED_1000)
-#define MT7531_FORCE_LNK BIT(31)
-#define MT7531_FORCE_SPD BIT(30)
-#define MT7531_FORCE_DPX BIT(29)
-#define MT7531_FORCE_RX_FC BIT(28)
-#define MT7531_FORCE_TX_FC BIT(27)
-#define MT7531_FORCE_EEE100 BIT(26)
-#define MT7531_FORCE_EEE1G BIT(25)
-#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
- MT7531_FORCE_SPD | \
- MT7531_FORCE_DPX | \
- MT7531_FORCE_RX_FC | \
- MT7531_FORCE_TX_FC | \
- MT7531_FORCE_EEE100 | \
- MT7531_FORCE_EEE1G)
-#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
- PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
- PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
+#define MT7531_FORCE_MODE_LNK BIT(31)
+#define MT7531_FORCE_MODE_SPD BIT(30)
+#define MT7531_FORCE_MODE_DPX BIT(29)
+#define MT7531_FORCE_MODE_RX_FC BIT(28)
+#define MT7531_FORCE_MODE_TX_FC BIT(27)
+#define MT7531_FORCE_MODE_EEE100 BIT(26)
+#define MT7531_FORCE_MODE_EEE1G BIT(25)
+#define MT7531_FORCE_MODE_MASK (MT7531_FORCE_MODE_LNK | \
+ MT7531_FORCE_MODE_SPD | \
+ MT7531_FORCE_MODE_DPX | \
+ MT7531_FORCE_MODE_RX_FC | \
+ MT7531_FORCE_MODE_TX_FC | \
+ MT7531_FORCE_MODE_EEE100 | \
+ MT7531_FORCE_MODE_EEE1G)
+#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
+ PMCR_FORCE_EEE1G | \
+ PMCR_FORCE_EEE100 | \
+ PMCR_FORCE_RX_FC_EN | \
+ PMCR_FORCE_TX_FC_EN | \
+ PMCR_FORCE_SPEED_1000 | \
+ PMCR_FORCE_SPEED_100 | \
+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
#define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100)
#define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24)
|
