1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
From ff83e3023cb8fc3b5dfc12e0c91bf1eb9dc4c4c6 Mon Sep 17 00:00:00 2001
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Date: Sat, 21 Mar 2020 14:36:24 +0100
Subject: [PATCH] staging: mt7621-pci-phy: re-do 'xtal_mode' detection
Detection of the Xtal mode is using magic numbers that
can be avoided using properly some definitions and a more
accurate variable name from 'reg' into 'xtal_mode'. This
increase readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200321133624.31388-4-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
+++ b/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
@@ -75,6 +75,9 @@
#define RG_PE1_FRC_MSTCKDIV BIT(5)
+#define XTAL_MODE_SEL_SHIFT 6
+#define XTAL_MODE_SEL_MASK 0x7
+
#define MAX_PHYS 2
/**
@@ -136,9 +139,11 @@ static void mt7621_bypass_pipe_rst(struc
static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy)
{
struct device *dev = phy->dev;
- u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+ u32 xtal_mode;
+
+ xtal_mode = (rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0)
+ >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
- reg = (reg >> 6) & 0x7;
/* Set PCIe Port PHY to disable SSC */
/* Debug Xtal Type */
mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG,
@@ -154,13 +159,13 @@ static void mt7621_set_phy_for_ssc(struc
RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN);
}
- if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
+ if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
/* Set Pre-divider ratio (for host mode) */
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
RG_PE1_H_PLL_PREDIV,
RG_PE1_H_PLL_PREDIV_VAL(0x01));
dev_info(dev, "Xtal is 40MHz\n");
- } else if (reg >= 6) { /* 25MHz Xal */
+ } else if (xtal_mode >= 6) { /* 25MHz Xal */
mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG,
RG_PE1_H_PLL_PREDIV,
RG_PE1_H_PLL_PREDIV_VAL(0x00));
@@ -206,7 +211,7 @@ static void mt7621_set_phy_for_ssc(struc
mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG,
RG_PE1_H_PLL_BR, RG_PE1_H_PLL_BR_VAL(0x00));
- if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
+ if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */
/* set force mode enable of da_pe1_mstckdiv */
mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG,
RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV,
|
