soc/intel: Add Skylake SOC support

Add the files to support the Skylake SOC.
Matches chromium tree at 927026db

BRANCH=none
BUG=None
TEST=Build and run on a Skylake platform

Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

1 files changed, 71 insertions, 25 deletions

diff --git a/src/soc/intel/skylake/bootblock/cpu.c b/src/soc/intel/skylake/bootblock/cpu.c
index 3a47d13f0a0c..d4506e592a66 100644
--- a/src/soc/intel/skylake/bootblock/cpu.c
+++ b/src/soc/intel/skylake/bootblock/cpu.c
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,7 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Foundation, Inc.
  */
 
 #include <stdint.h>
@@ -22,11 +23,18 @@
 #include <cpu/x86/cache.h>
 #include <cpu/x86/msr.h>
 #include <cpu/x86/mtrr.h>
+#include <device/pci_def.h>
 #include <arch/io.h>
-#include <halt.h>
 #include <cpu/intel/microcode/microcode.c>
-#include <soc/rcba.h>
+#include <reset.h>
 #include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/spi.h>
+
+/* Soft Reset Data Register Bit 12 = MAX Boot Frequency */
+#define SPI_STRAP_MAX_FREQ	(1<<12)
+/* Soft Reset Data Register Bit 6-11 = Flex Ratio */
+#define FLEX_RATIO_BIT	6
 
 static void set_var_mtrr(
 	unsigned reg, unsigned base, unsigned size, unsigned type)
@@ -47,7 +55,6 @@ static void enable_rom_caching(void)
 	msr_t msr;
 
 	disable_cache();
-	/* Why only top 4MiB ? */
 	set_var_mtrr(1, CACHE_ROM_BASE, CACHE_ROM_SIZE, MTRR_TYPE_WRPROT);
 	enable_cache();
 
@@ -68,10 +75,59 @@ static void bootblock_mdelay(int ms)
 	} while ((current.lo - start.lo) < target);
 }
 
+static void set_pch_cpu_strap(u8 flex_ratio)
+{
+	device_t dev = PCH_DEV_SPI;
+	uint8_t *spibar = (void *)TEMP_SPI_BAR;
+	u32 ssl, ssms, soft_reset_data;
+	u8 pcireg;
+
+	/* Assign Resources to SPI Controller */
+	/* Clear BIT 1-2 SPI Command Register */
+	pcireg = pci_read_config8(dev, PCI_COMMAND);
+	pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	pci_write_config8(dev, PCI_COMMAND, pcireg);
+
+	/* Program Temporary BAR for SPI */
+	pci_write_config32(dev, PCH_SPI_BASE_ADDRESS, TEMP_SPI_BAR);
+
+	/* Enable Bus Master and MMIO Space */
+	pcireg = pci_read_config8(dev, PCI_COMMAND);
+	pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_write_config8(dev, PCI_COMMAND, pcireg);
+
+	/* Set Strap Lock Disable*/
+	ssl = read32(spibar + SPIBAR_RESET_LOCK);
+	ssl |= SPIBAR_RESET_LOCK_DISABLE;
+	write32(spibar + SPIBAR_RESET_LOCK, ssl);
+
+	/* Soft Reset Data Register Bit 12 = MAX Boot Frequency
+	 * Bit 6-11 = Flex Ratio
+	 * Soft Reset Data register located at SPIBAR0 offset 0xF8[0:15].
+	 */
+	soft_reset_data = SPI_STRAP_MAX_FREQ;
+	soft_reset_data |= (flex_ratio << FLEX_RATIO_BIT);
+	write32(spibar + SPIBAR_RESET_DATA, soft_reset_data);
+
+	/* Set Strap Mux Select  set to '1' */
+	ssms = read32(spibar + SPIBAR_RESET_CTRL);
+	ssms |= SPIBAR_RESET_CTRL_SSMC;
+	write32(spibar + SPIBAR_RESET_CTRL, ssms);
+
+	/* Set Strap Lock Enable*/
+	ssl = read32(spibar + SPIBAR_RESET_LOCK);
+	ssl |= SPIBAR_RESET_LOCK_ENABLE;
+	write32(spibar + SPIBAR_RESET_LOCK, ssl);
+
+	/* Disable SPI Controller MMIO space */
+	pcireg = pci_read_config8(dev, PCI_COMMAND);
+	pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+	pci_write_config8(dev, PCI_COMMAND, pcireg);
+}
+
 static void set_flex_ratio_to_tdp_nominal(void)
 {
 	msr_t flex_ratio, msr;
-	u32 soft_reset;
 	u8 nominal_ratio;
 
 	/* Check for Flex Ratio support */
@@ -98,23 +154,14 @@ static void set_flex_ratio_to_tdp_nominal(void)
 	flex_ratio.lo |= FLEX_RATIO_LOCK;
 	wrmsr(MSR_FLEX_RATIO, flex_ratio);
 
-	/* Set flex ratio in soft reset data register bits 11:6.
-	 * RCBA region is enabled in southbridge bootblock */
-	soft_reset = RCBA32(SOFT_RESET_DATA);
-	soft_reset &= ~(0x3f << 6);
-	soft_reset |= (nominal_ratio & 0x3f) << 6;
-	RCBA32(SOFT_RESET_DATA) = soft_reset;
-
-	/* Set soft reset control to use register value */
-	RCBA32_OR(SOFT_RESET_CTRL, 1);
+	/* Set PCH Soft Reset Data Register with new Flex Ratio */
+	set_pch_cpu_strap(nominal_ratio);
 
 	/* Delay before reset to avoid potential TPM lockout */
 	bootblock_mdelay(30);
 
-	/* Issue warm reset, will be "CPU only" due to soft reset data */
-	outb(0x0, 0xcf9);
-	outb(0x6, 0xcf9);
-	halt();
+	/* Issue soft reset, will be "CPU only" due to soft reset data */
+	soft_reset();
 }
 
 static void check_for_clean_reset(void)
@@ -122,14 +169,13 @@ static void check_for_clean_reset(void)
 	msr_t msr;
 	msr = rdmsr(MTRRdefType_MSR);
 
-	/* Use the MTRR default type MSR as a proxy for detecting INIT#.
+	/*
+	 * Use the MTRR default type MSR as a proxy for detecting INIT#.
 	 * Reset the system if any known bits are set in that MSR. That is
-	 * an indication of the CPU not being properly reset. */
-	if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn)) {
-		outb(0x0, 0xcf9);
-		outb(0x6, 0xcf9);
-		halt();
-	}
+	 * an indication of the CPU not being properly reset.
+	 */
+	if (msr.lo & (MTRRdefTypeEn | MTRRdefTypeFixEn))
+		soft_reset();
 }
 
 static void bootblock_cpu_init(void)