soc/intel/tgl: Add configurable value for UsbTcPortEn

As a requirement of TCSS this setting needs to be correctly set
to determine what Type-C ports are enabled on the platform. Without
this value correctly set there can be adverse effects on the other
TCSS specific values.

BUG=b:159151238
BRANCH=firmware-volteer-13672.B
TEST=Built image for Voxel and verified that S0ix cycles no longer
     fail when the IomPortPad is set to 0

Change-Id: I6c5260cda71041439fe89d15bd3cafd4052ef1e7
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>

2 files changed, 8 insertions, 0 deletions

diff --git a/src/soc/intel/tigerlake/chip.h b/src/soc/intel/tigerlake/chip.h
index f38330b988f3..86e77da97262 100644
--- a/src/soc/intel/tigerlake/chip.h
+++ b/src/soc/intel/tigerlake/chip.h
@@ -328,6 +328,13 @@ struct soc_intel_tigerlake_config {
 	uint8_t TcssXdciEn;
 
 	/*
+	 * Specifies which Type-C Ports are enabled on the system
+	 * each bit represents a port starting at 0
+	 * Example: set value to 0x3 for ports 0 and 1 to be enabled
+	 */
+	uint8_t UsbTcPortEn;
+
+	/*
 	 * IOM Port Config
 	 * If a port orientation needs to be controlled by the SOC this setting must be
 	 * updated to reflect the correct GPIOs being used for the SOC port flipping.
diff --git a/src/soc/intel/tigerlake/fsp_params.c b/src/soc/intel/tigerlake/fsp_params.c
index b31d0acb0474..c0d712ca351e 100644
--- a/src/soc/intel/tigerlake/fsp_params.c
+++ b/src/soc/intel/tigerlake/fsp_params.c
@@ -123,6 +123,7 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd)
 	else
 		params->D3ColdEnable = !config->TcssD3ColdDisable;
 
+	params->UsbTcPortEn = config->UsbTcPortEn;
 	params->TcssAuxOri = config->TcssAuxOri;
 	for (i = 0; i < 8; i++)
 		params->IomTypeCPortPadCfg[i] = config->IomTypeCPortPadCfg[i];