soc/intel/common/block: Add Intel common UART code

Create Intel Common UART driver code. This code does
below UART configuration for bootblock phase.

* Program BAR
* Configure reset register
* Configure clock register

Change-Id: I3843fac88cfb7bbb405be50d69f555b274f0d72a
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/18952
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

4 files changed, 65 insertions, 0 deletions

diff --git a/src/soc/intel/common/block/include/intelblocks/uart.h b/src/soc/intel/common/block/include/intelblocks/uart.h
new file mode 100644
index 000000000000..ed4c7f012734
--- /dev/null
+++ b/src/soc/intel/common/block/include/intelblocks/uart.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SOC_INTEL_COMMON_BLOCK_UART_H
+#define SOC_INTEL_COMMON_BLOCK_UART_H
+
+#include <arch/io.h>
+
+void uart_common_init(device_t dev, uintptr_t baseaddr,
+		uint32_t clk_m_val, uint32_t clk_n_val);
+
+#endif	/* SOC_INTEL_COMMON_BLOCK_UART_H */
diff --git a/src/soc/intel/common/block/uart/Kconfig b/src/soc/intel/common/block/uart/Kconfig
new file mode 100644
index 000000000000..103659f4c4ed
--- /dev/null
+++ b/src/soc/intel/common/block/uart/Kconfig
@@ -0,0 +1,5 @@
+config SOC_INTEL_COMMON_BLOCK_UART
+	bool
+	select SOC_INTEL_COMMON_BLOCK_LPSS
+	help
+	  Intel Processor common UART support
diff --git a/src/soc/intel/common/block/uart/Makefile.inc b/src/soc/intel/common/block/uart/Makefile.inc
new file mode 100644
index 000000000000..13f5da880f19
--- /dev/null
+++ b/src/soc/intel/common/block/uart/Makefile.inc
@@ -0,0 +1 @@
+bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
\ No newline at end of file
diff --git a/src/soc/intel/common/block/uart/uart.c b/src/soc/intel/common/block/uart/uart.c
new file mode 100644
index 000000000000..729a31ba1e29
--- /dev/null
+++ b/src/soc/intel/common/block/uart/uart.c
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/pci_def.h>
+#include <intelblocks/lpss.h>
+#include <intelblocks/uart.h>
+
+void uart_common_init(device_t dev, uintptr_t baseaddr, uint32_t clk_m_val,
+		uint32_t clk_n_val)
+{
+	/* Set UART base address */
+	pci_write_config32(dev, PCI_BASE_ADDRESS_0, baseaddr);
+
+	/* Enable memory access and bus master */
+	pci_write_config32(dev, PCI_COMMAND,
+			PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	/* Take UART out of reset */
+	lpss_reset_release(baseaddr);
+
+	/* Set M and N divisor inputs and enable clock */
+	lpss_clk_update(baseaddr, clk_m_val, clk_n_val);
+}