soc/qualcomm: Add PCIe support

Add PCIe platform driver for Qualcomm platforms.

Reference:
  - linux/drivers/pci/controller/dwc/pcie-qcom.c
  - Linux driver base commit: 82a823833f4e3769e82cdb4df1bc2234bc65b16c

BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe card
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.

Output logs:
 ->dpch: storage init
   Initializing NVMe controller 1e0f:0001
   Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
   Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
   *  0: NVMe Namespace 1
    1 devices total

Also verified NVMe boot path, that is depthcharge is able to load the
kernel image from NVMe storage.

Change-Id: Iccf60aa56541f5230fa9c3f821d7709615c36631
Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com>
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53902
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

3 files changed, 956 insertions, 0 deletions

diff --git a/src/soc/qualcomm/common/include/soc/pcie.h b/src/soc/qualcomm/common/include/soc/pcie.h
new file mode 100644
index 000000000000..09ea6712dc76
--- /dev/null
+++ b/src/soc/qualcomm/common/include/soc/pcie.h
@@ -0,0 +1,225 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _PCIE_H_
+#define _PCIE_H_
+
+#include <types.h>
+#include <device/device.h>
+#include <soc/gpio.h>
+
+/*
+ * Config, IO and MMIO space offsets relative to controller base and sizes.
+ *
+ * EP config space starts at 1MB offset from controller base.
+ * EP config space size would be 4KB for each endpoint.
+ * IO space starts at 2MB offset from controller base and its of 1MB size.
+ * MMIO space starts from 3MB offset from controller base and it can be up to
+ * end of space reserved for PCIe.
+ */
+#define PCIE_EP_CONF_OFFSET		0x100000
+#define PCIE_EP_CONF_SIZE		0x1000
+#define PCIE_IO_SPACE_OFFSET		0x200000
+#define PCIE_IO_SPACE_SIZE		0x100000
+#define PCIE_MMIO_SPACE_OFFSET		0x300000
+
+/* Parf Registers */
+#define PCIE_PARF_SYS_CTRL		0x00
+#define MAC_PHY_PWRDOWN_MUX_EN		BIT(29)
+#define PCIE_PARF_PHY_CTRL		0x40
+#define PHY_PWR_DOWN			BIT(0)
+#define PCIE_PARF_MHI_CLOCK_RESET_CTRL	0x174
+#define MHI_BYPASS			BIT(4)
+#define PCIE_PARF_LTSSM			0x1B0
+#define LTSSM_EN			BIT(8)
+#define PCIE_PARF_DBI_BASE_ADDR		0x350
+#define PCIE_PARF_DEVICE_TYPE		0x1000
+#define DEVICE_TYPE_RC			0x4
+#define PCIE_PARF_BDF_TO_SID_CFG	0x2C00
+#define BDF_TO_SID_BYPASS		BIT(0)
+
+/* ELBI */
+#define PCIE3X2_ELBI_SYS_STTS		0x08
+#define XMLH_LINK_UP			0x400
+
+/* DBI Registers */
+#define PCIE_LINK_CAPABILITY		0x7c
+#define PCIE_LINK_CTL_2			0xa0
+#define TARGET_LINK_SPEED_MASK		0xf
+#define LINK_SPEED_GEN_1		0x1
+#define LINK_SPEED_GEN_2		0x2
+#define LINK_SPEED_GEN_3		0x3
+#define PCIE_LINK_UP_MS			100
+#define LINK_WAIT_MAX_RETRIES		10
+
+#define COMMAND_MASK			0xffff
+
+#define TYPE1_HDR_BUS_NUM_MASK		0xffffff
+#define RC_PRI_BUS_NUM			0x0
+#define RC_SEC_BUS_NUM			0x1
+#define RC_SUB_BUS_NUM			0xff
+#define ROOT_PORT_BUS_NUM		((RC_SUB_BUS_NUM << 16) | \
+					(RC_SEC_BUS_NUM << 8)  | \
+					RC_PRI_BUS_NUM)
+
+/* Synopsys-specific PCIe configuration registers */
+#define PCIE_DBI_MISC_CONTROL_1_OFF	0x8BC
+#define PCIE_DBI_RO_WR_EN		BIT(0)
+
+#define PCIE_3x2_NUM_LANES		2
+#define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
+#define PORT_LOGIC_LINK_WIDTH_MASK	(0x1f << 8)
+#define PORT_LOGIC_LINK_WIDTH_1_LANES	(0x1 << 8)
+#define PORT_LOGIC_LINK_WIDTH_2_LANES	(0x2 << 8)
+#define PORT_LOGIC_LINK_WIDTH_4_LANES	(0x4 << 8)
+#define PORT_LOGIC_LINK_WIDTH_8_LANES	(0x8 << 8)
+
+#define PCIE_PORT_LINK_CONTROL		0x710
+#define PORT_LINK_MODE_MASK		(0x3f << 16)
+#define PORT_LINK_MODE_1_LANES		(0x1 << 16)
+#define PORT_LINK_MODE_2_LANES		(0x3 << 16)
+#define PORT_LINK_MODE_4_LANES		(0x7 << 16)
+#define PORT_LINK_MODE_8_LANES		(0xf << 16)
+
+/*
+ * iATU Unroll-specific register definitions
+ * From DesignWare PCIe core v4.80, the address translation
+ * will be made by unroll
+ */
+#define PCIE_ATU_REGION_INDEX1		0x1
+#define PCIE_ATU_REGION_INDEX0		0x0
+#define PCIE_ATU_TYPE_MEM		0x0
+#define PCIE_ATU_TYPE_CFG0		0x4
+#define PCIE_ATU_TYPE_CFG1		0x5
+#define PCIE_ATU_ENABLE			BIT(31)
+#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
+
+#define PCIE_ATU_UNR_REGION_CTRL1	0x00
+#define PCIE_ATU_UNR_REGION_CTRL2	0x04
+#define PCIE_ATU_UNR_LOWER_BASE		0x08
+#define PCIE_ATU_UNR_UPPER_BASE		0x0C
+#define PCIE_ATU_UNR_LIMIT		0x10
+#define PCIE_ATU_UNR_LOWER_TARGET	0x14
+#define PCIE_ATU_UNR_UPPER_TARGET	0x18
+
+#define LINK_WAIT_MAX_IATU_RETRIES	5
+#define LINK_WAIT_IATU			1000
+
+/* PHY Specific fields */
+#define QPHY_SW_RESET			0x00
+#define SW_RESET			BIT(0)
+#define QPHY_PCS_STATUS			0x14
+#define PHY_STATUS			BIT(6)
+#define QPHY_PCS_PWR_DWN_CNTRL		0x40
+#define SW_PWRDN			BIT(0)
+#define REFCLK_DRV_DSBL			BIT(1)
+#define QPHY_START_CTRL			0x44
+#define SERDES_START			BIT(0)
+#define PCS_START			BIT(1)
+
+/* Register address builder */
+#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((region) << 9)
+#define lower_32_bits(n)		((u32)(n))
+#define upper_32_bits(n)		((u32)(((n) >> 16) >> 16))
+
+#define QMP_PHY_INIT_CFG(o, v)		\
+	{				\
+		.offset = o,		\
+		.val = v,		\
+		.lane_mask = 0xff,	\
+	}
+
+typedef uint64_t pci_addr_t;
+typedef uint64_t pci_size_t;
+
+struct qcom_qmp_phy_init_tbl {
+	unsigned int offset;
+	uint32_t val;
+	unsigned short lane_mask;
+};
+
+struct pcie_region {
+	pci_addr_t	bus_start;	/* BDF */
+	uint64_t	phys_start;	/* Start in physical address space */
+	pci_size_t	size;		/* Size */
+};
+
+/**
+ * struct pcie_cntlr_cfg_t - QCOM DW PCIe Controller state
+ *
+ * @lanes : Number of lanes
+ * @cfg_size : The size of the configuration space
+ * @cfg_base : The base address of config space
+ * @dbi_base : The base address of dbi register space
+ * @atu_base : The base address of address translation unit
+ * @parf : The base address of PARF register space
+ * @elbi : The base address of ELBI space
+ * @phy  : Base address of the PHY controller
+ * @pcie_bcr : address of the block controller register
+ * @reset : PERST gpio
+ * @io : Base address of the IO region
+ * @mem : Base address of memory region
+ */
+typedef struct {
+	unsigned int lanes;
+	unsigned int cfg_size;
+	void	*cfg_base;
+	void	*dbi_base;
+	void	*atu_base;
+	void	*parf;
+	void	*elbi;
+	void	*pcie_bcr;
+	void	*qmp_phy_bcr;
+	gpio_t	perst;
+	/* IO and MEM PCI regions */
+	struct	pcie_region io;
+	struct	pcie_region mem;
+} pcie_cntlr_cfg_t;
+
+typedef struct {
+	void *qmp_phy_base;
+	void *serdes;
+	void *tx0;
+	void *rx0;
+	void *pcs;
+	void *tx1;
+	void *rx1;
+	void *pcs_misc;
+
+	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
+	const struct qcom_qmp_phy_init_tbl *serdes_tbl;
+	unsigned int serdes_tbl_num;
+	const struct qcom_qmp_phy_init_tbl *serdes_tbl_sec;
+	unsigned int serdes_tbl_num_sec;
+	const struct qcom_qmp_phy_init_tbl *tx_tbl;
+	unsigned int tx_tbl_num;
+	const struct qcom_qmp_phy_init_tbl *tx_tbl_sec;
+	unsigned int tx_tbl_num_sec;
+	const struct qcom_qmp_phy_init_tbl *rx_tbl;
+	unsigned int rx_tbl_num;
+	const struct qcom_qmp_phy_init_tbl *rx_tbl_sec;
+	unsigned int rx_tbl_num_sec;
+	const struct qcom_qmp_phy_init_tbl *pcs_tbl;
+	unsigned int pcs_tbl_num;
+	const struct qcom_qmp_phy_init_tbl *pcs_tbl_sec;
+	unsigned int pcs_tbl_num_sec;
+	const struct qcom_qmp_phy_init_tbl *pcs_misc_tbl;
+	unsigned int pcs_misc_tbl_num;
+	const struct qcom_qmp_phy_init_tbl *pcs_misc_tbl_sec;
+	unsigned int pcs_misc_tbl_num_sec;
+} pcie_qmp_phy_cfg_t;
+
+struct qcom_pcie_cntlr_t {
+	pcie_cntlr_cfg_t	*cntlr_cfg;
+	pcie_qmp_phy_cfg_t	*qmp_phy_cfg;
+};
+
+int qcom_dw_pcie_enable_clock(void);
+int qcom_dw_pcie_enable_pipe_clock(void);
+void gcom_pcie_power_on_ep(void);
+void gcom_pcie_get_config(struct qcom_pcie_cntlr_t *host_cfg);
+void qcom_pci_domain_read_resources(struct device *dev);
+void qcom_setup_pcie_host(struct device *dev);
+
+#endif
diff --git a/src/soc/qualcomm/common/include/soc/qcom_qmp_phy.h b/src/soc/qualcomm/common/include/soc/qcom_qmp_phy.h
new file mode 100644
index 000000000000..ec4ac3465bb0
--- /dev/null
+++ b/src/soc/qualcomm/common/include/soc/qcom_qmp_phy.h
@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef QCOM_PHY_QMP_H_
+#define QCOM_PHY_QMP_H_
+
+/* Only for QMP V4 PHY - QSERDES COM registers */
+#define QSERDES_V4_COM_SSC_EN_CENTER			0x010
+#define QSERDES_V4_COM_SSC_PER1				0x01c
+#define QSERDES_V4_COM_SSC_PER2				0x020
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0		0x024
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0		0x028
+#define QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1		0x030
+#define QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1		0x034
+#define QSERDES_V4_COM_CLK_ENABLE1			0x048
+#define QSERDES_V4_COM_SYSCLK_BUF_ENABLE		0x050
+#define QSERDES_V4_COM_PLL_IVCO				0x058
+#define QSERDES_V4_COM_CMN_IPTRIM			0x060
+#define QSERDES_V4_COM_CP_CTRL_MODE0			0x074
+#define QSERDES_V4_COM_CP_CTRL_MODE1			0x078
+#define QSERDES_V4_COM_PLL_RCTRL_MODE0			0x07c
+#define QSERDES_V4_COM_PLL_RCTRL_MODE1			0x080
+#define QSERDES_V4_COM_PLL_CCTRL_MODE0			0x084
+#define QSERDES_V4_COM_PLL_CCTRL_MODE1			0x088
+#define QSERDES_V4_COM_SYSCLK_EN_SEL			0x094
+#define QSERDES_V4_COM_LOCK_CMP_EN			0x0a4
+#define QSERDES_V4_COM_LOCK_CMP1_MODE0			0x0ac
+#define QSERDES_V4_COM_LOCK_CMP2_MODE0			0x0b0
+#define QSERDES_V4_COM_LOCK_CMP1_MODE1			0x0b4
+#define QSERDES_V4_COM_DEC_START_MODE0			0x0bc
+#define QSERDES_V4_COM_LOCK_CMP2_MODE1			0x0b8
+#define QSERDES_V4_COM_DEC_START_MODE1			0x0c4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE0		0x0cc
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE0		0x0d0
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE0		0x0d4
+#define QSERDES_V4_COM_DIV_FRAC_START1_MODE1		0x0d8
+#define QSERDES_V4_COM_DIV_FRAC_START2_MODE1		0x0dc
+#define QSERDES_V4_COM_DIV_FRAC_START3_MODE1		0x0e0
+#define QSERDES_V4_COM_VCO_TUNE_MAP			0x10c
+#define QSERDES_V4_COM_VCO_TUNE1_MODE0			0x110
+#define QSERDES_V4_COM_VCO_TUNE2_MODE0			0x114
+#define QSERDES_V4_COM_VCO_TUNE1_MODE1			0x118
+#define QSERDES_V4_COM_VCO_TUNE2_MODE1			0x11c
+#define QSERDES_V4_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V4_COM_CLK_SELECT			0x154
+#define QSERDES_V4_COM_HSCLK_SEL			0x158
+#define QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V4_COM_CORECLK_DIV_MODE1		0x16c
+#define QSERDES_V4_COM_SVS_MODE_CLK_SEL			0x184
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1	0x1b4
+#define QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL		0x1bc
+#define QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1	0x1b8
+
+/* Only for QMP V4 PHY - TX registers */
+#define QSERDES_V4_TX_RES_CODE_LANE_TX			0x34
+#define QSERDES_V4_TX_RES_CODE_LANE_RX			0x38
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX		0x3c
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX		0x40
+#define QSERDES_V4_TX_LANE_MODE_1			0x84
+#define QSERDES_V4_TX_LANE_MODE_2			0x88
+#define QSERDES_V4_TX_RCV_DETECT_LVL_2			0x9c
+#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0xd8
+#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0xdC
+#define QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0xe0
+#define QSERDES_V4_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0xe4
+#define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0xb8
+#define QSERDES_V4_TX_PI_QEC_CTRL			0x104
+
+/* Only for QMP V4 PHY - RX registers */
+#define QSERDES_V4_RX_UCDR_FO_GAIN			0x008
+#define QSERDES_V4_RX_UCDR_SO_GAIN			0x014
+#define QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN		0x030
+#define QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE	0x034
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW		0x03c
+#define QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH		0x040
+#define QSERDES_V4_RX_UCDR_PI_CONTROLS			0x044
+#define QSERDES_V4_RX_UCDR_PI_CTRL2			0x048
+#define QSERDES_V4_RX_UCDR_SB2_THRESH1			0x04c
+#define QSERDES_V4_RX_UCDR_SB2_THRESH2			0x050
+#define QSERDES_V4_RX_UCDR_SB2_GAIN1			0x054
+#define QSERDES_V4_RX_UCDR_SB2_GAIN2			0x058
+#define QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE		0x060
+#define QSERDES_V4_RX_RCLK_AUXDATA_SEL			0x064
+#define QSERDES_V4_RX_AC_JTAG_ENABLE			0x068
+#define QSERDES_V4_RX_AC_JTAG_MODE			0x078
+#define QSERDES_V4_RX_RX_TERM_BW			0x080
+#define QSERDES_V4_RX_VGA_CAL_CNTRL1			0x0d4
+#define QSERDES_V4_RX_VGA_CAL_CNTRL2			0x0d8
+#define QSERDES_V4_RX_GM_CAL				0x0dc
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1		0x0e8
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2		0x0ec
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3		0x0f0
+#define QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4		0x0f4
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW		0x0f8
+#define QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH		0x0fc
+#define QSERDES_V4_RX_RX_IDAC_MEASURE_TIME		0x100
+#define QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1	0x110
+#define QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2		0x114
+#define QSERDES_V4_RX_SIGDET_ENABLES			0x118
+#define QSERDES_V4_RX_SIGDET_CNTRL			0x11c
+#define QSERDES_V4_RX_SIGDET_LVL			0x120
+#define QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL		0x124
+#define QSERDES_V4_RX_RX_BAND				0x128
+#define QSERDES_V4_RX_RX_MODE_00_LOW			0x170
+#define QSERDES_V4_RX_RX_MODE_00_HIGH			0x174
+#define QSERDES_V4_RX_RX_MODE_00_HIGH2			0x178
+#define QSERDES_V4_RX_RX_MODE_00_HIGH3			0x17c
+#define QSERDES_V4_RX_RX_MODE_00_HIGH4			0x180
+#define QSERDES_V4_RX_RX_MODE_01_LOW			0x184
+#define QSERDES_V4_RX_RX_MODE_01_HIGH			0x188
+#define QSERDES_V4_RX_RX_MODE_01_HIGH2			0x18c
+#define QSERDES_V4_RX_RX_MODE_01_HIGH3			0x190
+#define QSERDES_V4_RX_RX_MODE_01_HIGH4			0x194
+#define QSERDES_V4_RX_RX_MODE_10_LOW			0x198
+#define QSERDES_V4_RX_RX_MODE_10_HIGH			0x19c
+#define QSERDES_V4_RX_RX_MODE_10_HIGH2			0x1a0
+#define QSERDES_V4_RX_RX_MODE_10_HIGH3			0x1a4
+#define QSERDES_V4_RX_RX_MODE_10_HIGH4			0x1a8
+#define QSERDES_V4_RX_DFE_EN_TIMER			0x1b4
+#define QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET		0x1b8
+#define QSERDES_V4_RX_DCC_CTRL1				0x1bc
+#define QSERDES_V4_RX_VTH_CODE				0x1c4
+
+/* Only for QMP V4 PHY - PCIe PCS registers */
+#define QPHY_V4_PCS_SW_RESET				0x000
+#define QPHY_V4_PCS_REVISION_ID0			0x004
+#define QPHY_V4_PCS_REVISION_ID1			0x008
+#define QPHY_V4_PCS_REVISION_ID2			0x00c
+#define QPHY_V4_PCS_REVISION_ID3			0x010
+#define QPHY_V4_PCS_PCS_STATUS1				0x014
+#define QPHY_V4_PCS_PCS_STATUS2				0x018
+#define QPHY_V4_PCS_PCS_STATUS3				0x01c
+#define QPHY_V4_PCS_PCS_STATUS4				0x020
+#define QPHY_V4_PCS_PCS_STATUS5				0x024
+#define QPHY_V4_PCS_PCS_STATUS6				0x028
+#define QPHY_V4_PCS_PCS_STATUS7				0x02c
+#define QPHY_V4_PCS_DEBUG_BUS_0_STATUS			0x030
+#define QPHY_V4_PCS_DEBUG_BUS_1_STATUS			0x034
+#define QPHY_V4_PCS_DEBUG_BUS_2_STATUS			0x038
+#define QPHY_V4_PCS_DEBUG_BUS_3_STATUS			0x03c
+#define QPHY_V4_PCS_POWER_DOWN_CONTROL			0x040
+#define QPHY_V4_PCS_START_CONTROL			0x044
+#define QPHY_V4_PCS_INSIG_SW_CTRL1			0x048
+#define QPHY_V4_PCS_INSIG_SW_CTRL2			0x04c
+#define QPHY_V4_PCS_INSIG_SW_CTRL3			0x050
+#define QPHY_V4_PCS_INSIG_SW_CTRL4			0x054
+#define QPHY_V4_PCS_INSIG_SW_CTRL5			0x058
+#define QPHY_V4_PCS_INSIG_SW_CTRL6			0x05c
+#define QPHY_V4_PCS_INSIG_SW_CTRL7			0x060
+#define QPHY_V4_PCS_INSIG_SW_CTRL8			0x064
+#define QPHY_V4_PCS_INSIG_MX_CTRL1			0x068
+#define QPHY_V4_PCS_INSIG_MX_CTRL2			0x06c
+#define QPHY_V4_PCS_INSIG_MX_CTRL3			0x070
+#define QPHY_V4_PCS_INSIG_MX_CTRL4			0x074
+#define QPHY_V4_PCS_INSIG_MX_CTRL5			0x078
+#define QPHY_V4_PCS_INSIG_MX_CTRL7			0x07c
+#define QPHY_V4_PCS_INSIG_MX_CTRL8			0x080
+#define QPHY_V4_PCS_OUTSIG_SW_CTRL1			0x084
+#define QPHY_V4_PCS_OUTSIG_MX_CTRL1			0x088
+#define QPHY_V4_PCS_CLAMP_ENABLE			0x08c
+#define QPHY_V4_PCS_POWER_STATE_CONFIG1			0x090
+#define QPHY_V4_PCS_POWER_STATE_CONFIG2			0x094
+#define QPHY_V4_PCS_FLL_CNTRL1				0x098
+#define QPHY_V4_PCS_FLL_CNTRL2				0x09c
+#define QPHY_V4_PCS_FLL_CNT_VAL_L			0x0a0
+#define QPHY_V4_PCS_FLL_CNT_VAL_H_TOL			0x0a4
+#define QPHY_V4_PCS_FLL_MAN_CODE			0x0a8
+#define QPHY_V4_PCS_TEST_CONTROL1			0x0ac
+#define QPHY_V4_PCS_TEST_CONTROL2			0x0b0
+#define QPHY_V4_PCS_TEST_CONTROL3			0x0b4
+#define QPHY_V4_PCS_TEST_CONTROL4			0x0b8
+#define QPHY_V4_PCS_TEST_CONTROL5			0x0bc
+#define QPHY_V4_PCS_TEST_CONTROL6			0x0c0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG1			0x0c4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG2			0x0c8
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG3			0x0cc
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG4			0x0d0
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG5			0x0d4
+#define QPHY_V4_PCS_LOCK_DETECT_CONFIG6			0x0d8
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG1			0x0dc
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG2			0x0e0
+#define QPHY_V4_PCS_REFGEN_REQ_CONFIG3			0x0e4
+#define QPHY_V4_PCS_BIST_CTRL				0x0e8
+#define QPHY_V4_PCS_PRBS_POLY0				0x0ec
+#define QPHY_V4_PCS_PRBS_POLY1				0x0f0
+#define QPHY_V4_PCS_FIXED_PAT0				0x0f4
+#define QPHY_V4_PCS_FIXED_PAT1				0x0f8
+#define QPHY_V4_PCS_FIXED_PAT2				0x0fc
+#define QPHY_V4_PCS_FIXED_PAT3				0x100
+#define QPHY_V4_PCS_FIXED_PAT4				0x104
+#define QPHY_V4_PCS_FIXED_PAT5				0x108
+#define QPHY_V4_PCS_FIXED_PAT6				0x10c
+#define QPHY_V4_PCS_FIXED_PAT7				0x110
+#define QPHY_V4_PCS_FIXED_PAT8				0x114
+#define QPHY_V4_PCS_FIXED_PAT9				0x118
+#define QPHY_V4_PCS_FIXED_PAT10				0x11c
+#define QPHY_V4_PCS_FIXED_PAT11				0x120
+#define QPHY_V4_PCS_FIXED_PAT12				0x124
+#define QPHY_V4_PCS_FIXED_PAT13				0x128
+#define QPHY_V4_PCS_FIXED_PAT14				0x12c
+#define QPHY_V4_PCS_FIXED_PAT15				0x130
+#define QPHY_V4_PCS_TXMGN_CONFIG			0x134
+#define QPHY_V4_PCS_G12S1_TXMGN_V0			0x138
+#define QPHY_V4_PCS_G12S1_TXMGN_V1			0x13c
+#define QPHY_V4_PCS_G12S1_TXMGN_V2			0x140
+#define QPHY_V4_PCS_G12S1_TXMGN_V3			0x144
+#define QPHY_V4_PCS_G12S1_TXMGN_V4			0x148
+#define QPHY_V4_PCS_G12S1_TXMGN_V0_RS			0x14c
+#define QPHY_V4_PCS_G12S1_TXMGN_V1_RS			0x150
+#define QPHY_V4_PCS_G12S1_TXMGN_V2_RS			0x154
+#define QPHY_V4_PCS_G12S1_TXMGN_V3_RS			0x158
+#define QPHY_V4_PCS_G12S1_TXMGN_V4_RS			0x15c
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN			0x160
+#define QPHY_V4_PCS_G3S2_TXMGN_MAIN_RS			0x164
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M6DB			0x168
+#define QPHY_V4_PCS_G12S1_TXDEEMPH_M3P5DB		0x16c
+#define QPHY_V4_PCS_G3S2_PRE_GAIN			0x170
+#define QPHY_V4_PCS_G3S2_POST_GAIN			0x174
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET		0x178
+#define QPHY_V4_PCS_G3S2_PRE_GAIN_RS			0x17c
+#define QPHY_V4_PCS_G3S2_POST_GAIN_RS			0x180
+#define QPHY_V4_PCS_G3S2_PRE_POST_OFFSET_RS		0x184
+#define QPHY_V4_PCS_RX_SIGDET_LVL			0x188
+#define QPHY_V4_PCS_RX_SIGDET_DTCT_CNTRL		0x18c
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L		0x190
+#define QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H		0x194
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL1			0x198
+#define QPHY_V4_PCS_RATE_SLEW_CNTRL2			0x19c
+#define QPHY_V4_PCS_PWRUP_RESET_DLY_TIME_AUXCLK		0x1a0
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_L	0x1a4
+#define QPHY_V4_PCS_P2U3_WAKEUP_DLY_TIME_AUXCLK_H	0x1a8
+#define QPHY_V4_PCS_TSYNC_RSYNC_TIME			0x1ac
+#define QPHY_V4_PCS_CDR_RESET_TIME			0x1b0
+#define QPHY_V4_PCS_TSYNC_DLY_TIME			0x1b4
+#define QPHY_V4_PCS_ELECIDLE_DLY_SEL			0x1b8
+#define QPHY_V4_PCS_CMN_ACK_OUT_SEL			0x1bc
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG1		0x1c0
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG2		0x1c4
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG3		0x1c8
+#define QPHY_V4_PCS_ALIGN_DETECT_CONFIG4		0x1cc
+#define QPHY_V4_PCS_PCS_TX_RX_CONFIG			0x1d0
+#define QPHY_V4_PCS_RX_IDLE_DTCT_CNTRL			0x1d4
+#define QPHY_V4_PCS_RX_DCC_CAL_CONFIG			0x1d8
+#define QPHY_V4_PCS_EQ_CONFIG1				0x1dc
+#define QPHY_V4_PCS_EQ_CONFIG2				0x1e0
+#define QPHY_V4_PCS_EQ_CONFIG3				0x1e4
+#define QPHY_V4_PCS_EQ_CONFIG4				0x1e8
+#define QPHY_V4_PCS_EQ_CONFIG5				0x1ec
+
+/* Only for QMP V4 PHY - PCS_MISC registers */
+#define QPHY_V4_PCS_MISC_TYPEC_CTRL			0x00
+#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL		0x04
+#define QPHY_V4_PCS_MISC_PCS_MISC_CONFIG1		0x08
+#define QPHY_V4_PCS_MISC_CLAMP_ENABLE			0x0c
+#define QPHY_V4_PCS_MISC_TYPEC_STATUS			0x10
+#define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS		0x14
+
+/* Only for QMP V4 PHY - PCS_PCIE registers */
+#define QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG2		0x0c
+#define QPHY_V4_PCS_PCIE_POWER_STATE_CONFIG4		0x14
+#define QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x1c
+#define QPHY_V4_PCS_PCIE_L1P1_WAKEUP_DLY_TIME_AUXCLK_L	0x40
+#define QPHY_V4_PCS_PCIE_L1P2_WAKEUP_DLY_TIME_AUXCLK_L	0x48
+#define QPHY_V4_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x50
+#define QPHY_V4_PCS_PCIE_OSC_DTCT_ACTIONS		0x90
+#define QPHY_V4_PCS_PCIE_EQ_CONFIG2			0xa4
+#define QPHY_V4_PCS_PCIE_PRESET_P6_P7_PRE		0xb4
+#define QPHY_V4_PCS_PCIE_PRESET_P10_PRE			0xbc
+#define QPHY_V4_PCS_PCIE_PRESET_P10_POST		0xe0
+
+#endif
diff --git a/src/soc/qualcomm/common/pcie_common.c b/src/soc/qualcomm/common/pcie_common.c
new file mode 100644
index 000000000000..67f628287508
--- /dev/null
+++ b/src/soc/qualcomm/common/pcie_common.c
@@ -0,0 +1,459 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <boot/coreboot_tables.h>
+#include <console/console.h>
+#include <delay.h>
+#include <device/device.h>
+#include <device/mmio.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <gpio.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/qcom_qmp_phy.h>
+#include <soc/pcie.h>
+#include <timer.h>
+
+#define ROOT_PORT_BDF		0x0
+#define ATU_CTRL2		PCIE_ATU_UNR_REGION_CTRL2
+
+static struct qcom_pcie_cntlr_t qcom_pcie_cfg;
+
+static inline void dw_pcie_dbi_rd_wr(bool enable)
+{
+	uint32_t val;
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+
+	val = read32(pcierc->dbi_base + PCIE_DBI_MISC_CONTROL_1_OFF);
+
+	if (enable)
+		val |= PCIE_DBI_RO_WR_EN;
+	else
+		val &= ~PCIE_DBI_RO_WR_EN;
+
+	write32(pcierc->dbi_base + PCIE_DBI_MISC_CONTROL_1_OFF, val);
+}
+
+static void dw_pcie_writel_iatu(unsigned int index, uint32_t reg, uint32_t val)
+{
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+	unsigned int offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	write32(pcierc->atu_base + offset + reg, val);
+}
+
+static uint32_t dw_pcie_readl_iatu(unsigned int index, uint32_t reg)
+{
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+	unsigned int offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+	return read32(pcierc->atu_base + offset + reg);
+}
+
+static void qcom_dw_pcie_prog_outbound_atu(unsigned int index,
+					   unsigned int type, uint64_t cpu_addr,
+					   uint64_t pcie_addr, uint32_t size)
+{
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_LOWER_BASE, lower_32_bits(cpu_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_UPPER_BASE, upper_32_bits(cpu_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_LIMIT, lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_LOWER_TARGET, lower_32_bits(pcie_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_UPPER_TARGET, upper_32_bits(pcie_addr));
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_REGION_CTRL1, type);
+	dw_pcie_writel_iatu(index, PCIE_ATU_UNR_REGION_CTRL2, PCIE_ATU_ENABLE);
+
+	/* Ensure ATU enable takes effect before any subsequent config access */
+	if (retry(LINK_WAIT_MAX_IATU_RETRIES,
+		  (dw_pcie_readl_iatu(index, ATU_CTRL2) & PCIE_ATU_ENABLE),
+		  udelay(LINK_WAIT_IATU)))
+		return;
+
+	printk(BIOS_ERR, "PCIe o/b iATU couldn't be enabled after 5ms\n");
+}
+
+static void qcom_pcie_configure_gpios(pcie_cntlr_cfg_t *cfg)
+{
+	gpio_configure(cfg->perst, 0, GPIO_NO_PULL, GPIO_16MA, GPIO_OUTPUT);
+}
+
+/**
+ * qcom_dw_pcie_configure() - Configure link capabilities and speed
+ *
+ * Configure the link capabilities and speed in the PCIe root complex.
+ */
+static void qcom_dw_pcie_configure(uint32_t cap_speed)
+{
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+
+	dw_pcie_dbi_rd_wr(true);
+
+	clrsetbits32(pcierc->dbi_base + PCIE_LINK_CAPABILITY,
+		     TARGET_LINK_SPEED_MASK, cap_speed);
+
+	clrsetbits32(pcierc->dbi_base + PCIE_LINK_CTL_2,
+		     TARGET_LINK_SPEED_MASK, cap_speed);
+
+	dw_pcie_dbi_rd_wr(false);
+	printk(BIOS_INFO, "PCIe Link speed configured in Gen %d\n", cap_speed);
+}
+
+/**
+ * is_pcie_link_up() - Return the link state
+ *
+ * Return: true for active link and false for no link
+ */
+static bool is_pcie_link_up(struct qcom_pcie_cntlr_t *pci)
+{
+	/* Read link status register */
+	return !!(read32(pci->cntlr_cfg->elbi + PCIE3X2_ELBI_SYS_STTS) & XMLH_LINK_UP);
+}
+
+/**
+ * wait_link_up() - Wait for the link to come up
+ *
+ * Return: true for active line and false for no link (timeout)
+ */
+static bool wait_link_up(struct qcom_pcie_cntlr_t *pci)
+{
+	/* Check if the link is up or not */
+	if (retry(LINK_WAIT_MAX_RETRIES, is_pcie_link_up(pci), mdelay(PCIE_LINK_UP_MS)))
+		return true;
+
+	printk(BIOS_ERR, "PCIe link is not up even after 1sec\n");
+	return false;
+}
+
+static enum cb_err qcom_pcie_dw_link_up(struct qcom_pcie_cntlr_t *pcie)
+{
+	if (is_pcie_link_up(pcie)) {
+		printk(BIOS_INFO, "PCIe Link is already up\n");
+		return CB_SUCCESS;
+	}
+
+	/* DW pre link configurations */
+	qcom_dw_pcie_configure(LINK_SPEED_GEN_2);
+
+	/* enable link training */
+	setbits32(pcie->cntlr_cfg->parf + PCIE_PARF_LTSSM, LTSSM_EN);
+
+	/* Check that link was established */
+	if (wait_link_up(pcie)) {
+		printk(BIOS_INFO, "PCIe link is up\n");
+		return CB_SUCCESS;
+	}
+
+	/*
+	 * Link can be established in Gen 1 as it failed to establish in Gen2.
+	 * So allow some time to do it.
+	 */
+	udelay(100);
+
+	return CB_ERR;
+}
+
+/**
+ * Returns root port config space address or endpoint config space address.
+ * For endpoint config address, mapping would be done with ATU.
+ */
+static void *qcom_dw_pcie_get_config_addr(struct qcom_pcie_cntlr_t *pcierc,
+					  pci_devfn_t dev)
+{
+	unsigned int atu_type, cfg_size;
+	void *cfg_address;
+	uint32_t bus, busdev, devfn;
+	pcie_cntlr_cfg_t *cntlr = pcierc->cntlr_cfg;
+	bus = PCI_DEV2SEGBUS(dev);
+	devfn = PCI_DEV2DEVFN(dev);
+
+	busdev = PCIE_ATU_BUS(bus) |
+		 PCIE_ATU_DEV(PCI_SLOT(devfn)) |
+		 PCIE_ATU_FUNC(PCI_FUNC(devfn));
+
+	/* Accessing root port configuration space */
+	if (!bus && !devfn) {
+		cfg_address = pcierc->cntlr_cfg->dbi_base;
+		return cfg_address;
+	}
+
+	/* For local bus use CFG0 type */
+	atu_type = (bus == 1) ? PCIE_ATU_TYPE_CFG0 : PCIE_ATU_TYPE_CFG1;
+
+	cfg_address = cntlr->cfg_base + (cntlr->cfg_size * devfn);
+	cfg_size = cntlr->cfg_size;
+
+	qcom_dw_pcie_prog_outbound_atu(PCIE_ATU_REGION_INDEX1, atu_type,
+				       (uint64_t)cfg_address, busdev, cfg_size);
+	return cfg_address;
+}
+
+static void qcom_dw_pcie_setup_rc(struct qcom_pcie_cntlr_t *pcie)
+{
+	uint32_t val;
+	pcie_cntlr_cfg_t *pcierc = pcie->cntlr_cfg;
+	/*
+	 * Enable DBI read-only registers for writing/updating configuration.
+	 * Write permission gets disabled towards the end of this function.
+	 */
+	dw_pcie_dbi_rd_wr(true);
+
+	val = read32(pcierc->dbi_base + PCIE_PORT_LINK_CONTROL);
+	/* Set the number of lanes */
+	val &= ~PORT_LINK_MODE_MASK;
+
+	switch (pcierc->lanes) {
+	case 1:
+		val |= PORT_LINK_MODE_1_LANES;
+		break;
+	case 2:
+		val |= PORT_LINK_MODE_2_LANES;
+		break;
+	case 4:
+		val |= PORT_LINK_MODE_4_LANES;
+		break;
+	case 8:
+		val |= PORT_LINK_MODE_8_LANES;
+		break;
+	default:
+		printk(BIOS_INFO, "PCIe num-lanes %u: invalid value\n",
+		       pcierc->lanes);
+		return;
+	}
+
+	write32(pcierc->dbi_base + PCIE_PORT_LINK_CONTROL, val);
+
+	/* Set link width speed control register */
+	val = read32(pcierc->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL);
+	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
+
+	switch (pcierc->lanes) {
+	case 1:
+		val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
+		break;
+	case 2:
+		val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
+		break;
+	case 4:
+		val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
+		break;
+	case 8:
+		val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
+		break;
+	default:
+		printk(BIOS_INFO, "PCIe invalid lanes option\n");
+		return;
+	}
+
+	write32(pcierc->dbi_base + PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+	/* Setup bus numbers */
+	clrsetbits32(pcierc->dbi_base + PCI_PRIMARY_BUS, TYPE1_HDR_BUS_NUM_MASK,
+		     ROOT_PORT_BUS_NUM);
+
+	/* Disable SMMU */
+	write32(pcierc->parf + PCIE_PARF_BDF_TO_SID_CFG, BDF_TO_SID_BYPASS);
+
+	/* Configure ATU for outbound accesses */
+	qcom_dw_pcie_prog_outbound_atu(PCIE_ATU_REGION_INDEX0,
+				       PCIE_ATU_TYPE_MEM,
+				       pcierc->mem.phys_start,
+				       ROOT_PORT_BDF, pcierc->mem.size);
+
+	/* Program correct class for RC */
+	write16(pcierc->dbi_base + PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_PCI);
+
+	/* Disable write permission right after the update */
+	dw_pcie_dbi_rd_wr(false);
+}
+
+static void qcom_qmp_phy_config_lane(void *base, const struct qcom_qmp_phy_init_tbl tbl[],
+				     unsigned int num, uint8_t ln_mask)
+{
+	unsigned int i;
+	const struct qcom_qmp_phy_init_tbl *t = tbl;
+
+	for (i = 0; i < num; i++, t++) {
+		if (!(t->lane_mask & ln_mask))
+			continue;
+		write32(base + t->offset, t->val);
+	}
+}
+
+static void qcom_qmp_phy_configure(void *base, const struct qcom_qmp_phy_init_tbl tbl[],
+				   unsigned int num)
+{
+	qcom_qmp_phy_config_lane(base, tbl, num, 0xff);
+}
+
+static enum cb_err qcom_qmp_phy_power_on(pcie_qmp_phy_cfg_t *qphy)
+{
+	uint64_t lock_us;
+
+	/* Release powerdown mode and allow endpoint refclk drive */
+	write32(qphy->pcs + QPHY_PCS_PWR_DWN_CNTRL, SW_PWRDN | REFCLK_DRV_DSBL);
+
+	/* Serdes configuration */
+	qcom_qmp_phy_configure(qphy->serdes, qphy->serdes_tbl, qphy->serdes_tbl_num);
+
+	/* Tx, Rx, and PCS configurations */
+	qcom_qmp_phy_config_lane(qphy->tx0, qphy->tx_tbl, qphy->tx_tbl_num, 1);
+	qcom_qmp_phy_config_lane(qphy->tx0, qphy->tx_tbl_sec, qphy->tx_tbl_num_sec, 1);
+	qcom_qmp_phy_config_lane(qphy->tx1, qphy->tx_tbl, qphy->tx_tbl_num, 2);
+	qcom_qmp_phy_config_lane(qphy->tx1, qphy->tx_tbl_sec, qphy->tx_tbl_num_sec, 2);
+	qcom_qmp_phy_config_lane(qphy->rx0, qphy->rx_tbl, qphy->rx_tbl_num, 1);
+	qcom_qmp_phy_config_lane(qphy->rx0, qphy->rx_tbl_sec, qphy->rx_tbl_num_sec, 1);
+	qcom_qmp_phy_config_lane(qphy->rx1, qphy->rx_tbl, qphy->rx_tbl_num, 2);
+	qcom_qmp_phy_config_lane(qphy->rx1, qphy->rx_tbl_sec, qphy->rx_tbl_num_sec, 2);
+	qcom_qmp_phy_configure(qphy->pcs, qphy->pcs_tbl, qphy->pcs_tbl_num);
+	qcom_qmp_phy_configure(qphy->pcs, qphy->pcs_tbl_sec, qphy->pcs_tbl_num_sec);
+	qcom_qmp_phy_configure(qphy->pcs_misc, qphy->pcs_misc_tbl, qphy->pcs_misc_tbl_num);
+	qcom_qmp_phy_configure(qphy->pcs_misc, qphy->pcs_misc_tbl_sec, qphy->pcs_tbl_num_sec);
+
+	/* Release software reset of PCS/Serdes */
+	clrbits32(qphy->pcs + QPHY_SW_RESET, SW_RESET);
+
+	/* start PCS/Serdes to operation mode */
+	write32(qphy->pcs  + QPHY_START_CTRL, PCS_START | SERDES_START);
+
+	/*
+	 * Wait for PHY initialization to be done
+	 * PCS_STATUS: wait for 1ms for PHY STATUS bit to be set
+	 */
+	lock_us = wait_us(1000, !(read32(qphy->qmp_phy_base + QPHY_PCS_STATUS) & PHY_STATUS));
+	if (!lock_us) {
+		printk(BIOS_ERR, "PCIe QMP PHY PLL failed to lock in 1ms\n");
+		return CB_ERR;
+	}
+
+	printk(BIOS_DEBUG, "PCIe QPHY Initialized took %lldus\n", lock_us);
+
+	qcom_dw_pcie_enable_pipe_clock();
+
+	return CB_SUCCESS;
+}
+
+/*
+ * Reset the PCIe PHY core.
+ * Allow 100us delay to ensure reset is asserted.
+ */
+static void qcom_qmp_reset_phy(struct qcom_pcie_cntlr_t *pcie)
+{
+	clock_reset_bcr(pcie->cntlr_cfg->qmp_phy_bcr, 1);
+	udelay(100);
+	clock_reset_bcr(pcie->cntlr_cfg->qmp_phy_bcr, 0);
+}
+
+/*
+ * Reset the PCIe controller core.
+ * Allow 100us delay to ensure reset is asserted.
+ */
+static void qcom_dw_pcie_reset_core(struct qcom_pcie_cntlr_t *pcie)
+{
+	clock_reset_bcr(pcie->cntlr_cfg->pcie_bcr, 1);
+	udelay(100);
+	clock_reset_bcr(pcie->cntlr_cfg->pcie_bcr, 0);
+}
+
+static enum cb_err qcom_dw_pcie_enable(struct qcom_pcie_cntlr_t *pcie)
+{
+	int ret;
+
+	pcie_cntlr_cfg_t *pcierc = pcie->cntlr_cfg;
+	pcie_qmp_phy_cfg_t *qmp_phy = pcie->qmp_phy_cfg;
+
+	/* assert PCIe reset link to keep EP in reset */
+	gpio_set(pcierc->perst, 0);
+
+	/* Enable PCIe controller and SoC specific clocks */
+	ret = qcom_dw_pcie_enable_clock();
+	if (ret) {
+		printk(BIOS_ERR, "Enable PCIe clocks failed\n");
+		return ret;
+	}
+
+	/* Reset the controller */
+	qcom_dw_pcie_reset_core(pcie);
+
+	/* configure PCIe to RC mode */
+	write32(pcierc->parf + PCIE_PARF_DEVICE_TYPE, DEVICE_TYPE_RC);
+
+	/* Power on the PHY */
+	clrbits32(pcierc->parf + PCIE_PARF_PHY_CTRL, PHY_PWR_DOWN);
+
+	/* MAC PHY_POWERDOWN MUX DISABLE */
+	clrbits32(pcierc->parf + PCIE_PARF_SYS_CTRL, MAC_PHY_PWRDOWN_MUX_EN);
+
+	/* Bypass MHI as its not needed */
+	setbits32(pcierc->parf + PCIE_PARF_MHI_CLOCK_RESET_CTRL, MHI_BYPASS);
+
+	qcom_qmp_reset_phy(pcie);
+
+	/* Initialize QMP PHY */
+	ret = qcom_qmp_phy_power_on(qmp_phy);
+	if (ret) {
+		printk(BIOS_ERR, "PCIe PHY init failed\n");
+		return ret;
+	}
+
+	qcom_dw_pcie_setup_rc(pcie);
+
+	/* de-assert PCIe reset link to bring EP out of reset */
+	gpio_set(pcierc->perst, 1);
+
+	/* establisth the link */
+	ret = qcom_pcie_dw_link_up(pcie);
+	if (ret) {
+		printk(BIOS_ERR, "PCIe Link init failed\n");
+		return ret;
+	}
+
+	return CB_SUCCESS;
+}
+
+/* map_bus function for mapping pcie_s_{read/write}_configXX() functions */
+volatile union pci_bank *pci_map_bus(pci_devfn_t dev)
+{
+	void *config_addr = NULL;
+
+	config_addr = qcom_dw_pcie_get_config_addr(&qcom_pcie_cfg, dev);
+	return (void *)config_addr;
+}
+
+/* PCI domain ops read_resources callback */
+void qcom_pci_domain_read_resources(struct device *dev)
+{
+	struct resource *res;
+	pcie_cntlr_cfg_t *pcierc = qcom_pcie_cfg.cntlr_cfg;
+
+	/* Initialize the system-wide I/O space constraints. */
+	res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
+	res->base = pcierc->io.phys_start;
+	res->limit = pcierc->io.size - 1;
+	res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+
+	/* Initialize the system-wide memory resources constraints. */
+	res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
+	res->base = pcierc->mem.phys_start;
+	res->limit = pcierc->mem.size - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
+}
+
+/* PCI domain ops enable callback */
+void qcom_setup_pcie_host(struct device *dev)
+{
+	gcom_pcie_get_config(&qcom_pcie_cfg);
+
+	/* Ensure PCIe endpoints are powered-on before initiating PCIe link training */
+	gcom_pcie_power_on_ep();
+
+	printk(BIOS_INFO, "Setup PCIe in RC mode\n");
+
+	/* Configure PERST gpio */
+	qcom_pcie_configure_gpios(qcom_pcie_cfg.cntlr_cfg);
+
+	if (!qcom_dw_pcie_enable(&qcom_pcie_cfg))
+		printk(BIOS_NOTICE, "PCIe enumerated succussfully..\n");
+	else
+		printk(BIOS_EMERG, "Failed to enable PCIe\n");
+
+}