summaryrefslogtreecommitdiffstats
path: root/src/soc
Commit message (Collapse)AuthorAgeFilesLines
* src: Remove unused 'include <string.h>'Elyes HAOUAS2019-10-2011-11/+0
| | | | | | | | Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* soc/amd/picasso: Adjust I2C ASLMarshall Dawson2019-10-202-30/+14
| | | | | | | | | | | Clarify names as I2C2, etc. Use iomap.h defines for base addresses. Update IRQs. Change-Id: I3800592e4b0bcb681d0dcf24f69e269f845be025 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/picasso: Update iomapMarshall Dawson2019-10-201-13/+21
| | | | | | | | | Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ieedc2062948a0d1563f82e4d0b1ca9c5bc3291a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33991 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/amd/picasso: Update UARTsMarshall Dawson2019-10-208-19/+217
| | | | | | | | | | | | | | | | | | | | Add a function to uart.c to ensure the right IOMux settings are programmed for the console UART. Update Kconfig to reflect the new addresses. Give the user the ability to downclock the UARTs' refclock to 1.8342MHz. Add the abiltiy to use an APU UART at a legacy I/O address. Update the AOAC register configuration for the two additional UARTs. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I74579674544f0edd2c0e6c4963270b442668e62f Reviewed-on: https://review.coreboot.org/c/coreboot/+/33767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/picasso: Add display identification and vbios nameMarshall Dawson2019-10-203-20/+3
| | | | | | | | | | | | | | Add Picasso's Device ID and default filename. Only a single Device ID is documented for Picasso so remove the oprom remapper function. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Iaf43d7c8da41beb05b58c494f0a6814f8f571b18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34422 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/amd/picasso: Remove unused SATA configurationsMarshall Dawson2019-10-201-42/+0
| | | | | | | | | | | Picasso's SATA controller operates only in AHCI mode. Remove the Kconfig symbols previously used to select between other possibilities. Change-Id: Iaeb8b4a2540e976d2e7361faf8c6d261e60398fd Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/picasso: Remove SATA from AOAC registersMarshall Dawson2019-10-204-21/+3
| | | | | | | | | | SATA is no longer defined in AOAC so remove its definitions. Change-Id: Ief0ab6b5f69f2d17c11d8e2ee40941ac56c077f6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/picasso: Update southbridgeMarshall Dawson2019-10-208-179/+112
| | | | | | | | | | | | | | | | | | Picasso's FCH has many similarities to Stoney Ridge, so few changes are necessary. The most notable changes are: * Update the index values for the C00/C01 interrupt routing * FORCE_STPCLK_RETRY is not present * PCIB is not defined * FCH MISC Registers 0xfed80e00 numbering has changed * C-state base moves from PM register to MSR * Add option to determine the intended MUX settion for LPC vs. eMMC * Remove the LEGACY_FREE option Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I69dfc4a875006639aa330385680d150331840e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/common: Add AcpiMmio access for SMBus PCI deviceMarshall Dawson2019-10-202-1/+44
| | | | | | | | | | | The standard PCI register space for D14F0 is accessible at 0xfed80000. Add functions for use as helpers. Change-Id: Icbf5bdc449322c3f5e59e6126d709cb2808591d5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/common/lpc: Add SuperIO decode functionMarshall Dawson2019-10-202-0/+16
| | | | | | | | | | | | | The LPC-ISA bridge supports two ranges for SuperIO control registers. Add a generic function to allow a mainboard to enable the appropriate range. Provide #define values that are more descriptive than the register's field names. Change-Id: Ic5445cfc137604cb1bb3ee3ea4c3a4ebdb9a9cab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35271 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/amd/picasso: Update for USB3.1Marshall Dawson2019-10-204-70/+8
| | | | | | | | | | | | | | Change to the appropriate device IDs. Remove the ehci resource call. Remove overcurrent settings, as this will be passed to AGESA in later change. Remove unused USB2 ACPI name assignment. Change-Id: Ic287a05b30ca03e3371cc4a30aaa93b236c6d3fb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* soc/amd/picasso: Update all PSP and amdfw.rom buildingMarshall Dawson2019-10-202-102/+326
| | | | | | | | | | | | | | | | | Add Kconfig options and Makefile command line options to generate the amdfw.rom image. A new intermediate image is introduced, which is the initial BIOS image the PSP places into DRAM prior to releasing the x86 reset. The amd_biospsp.img is a compressed version of the romstage.elf program pieces. Additional details of the PSP items are not public information. See NDA document PID #55758. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ib5e393e74ed60e968959012b6275686167a2d78a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
* src: Remove unused include '<device/pci_ids.h>'Elyes HAOUAS2019-10-184-4/+0
| | | | | | | | Change-Id: Ic90dcff9d0b49a75a26556e4a1884a2954ef68f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36063 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel/common: lpc/espi: fix wrong lock bitMichael Niewöhner2019-10-181-1/+1
| | | | | | | | | | | | This corrects the LPC/eSPI lock bit from bit 2 to bit 1 in accordance with doc#332691-003EN and doc#334819-001. Change-Id: I45335909b1f2b646e4fafedd78cb1aaf7052d60c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
* soc/mediatek/mt8183: Compress calibration blob with LZ4Hung-Te Lin2019-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | The DRAM calibration blob can be compressed using pre-RAM algorithm (currently LZ4), which will save ~12ms in boot time. On Kodama, boot time difference: Before: 1,082,711 After: 1,070,309 BUG=b:139099592,b:117953502 TEST=build and boot, cbfstool coreboot.rom print -v (see dram compressed) BRANCH=kukui Change-Id: Ic3bd49d67ee6f80a0e4d8f6945744642611edf64 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
* soc/mediatek/mt8183: Pass impedance data as a function argumentYu-Ping Wu2019-10-186-37/+52
| | | | | | | | | | | | | | | To make data flow more explicit, global variable 'impedance' is replaced with a local variable, which is passed as a function argument. BUG=none BRANCH=kukui TEST=Krane boots correctly Change-Id: I0f6dacc33fda013a3476a10d9899821b7297e770 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Run calibration with multiple frequencies for DVFS switchHuayang Duan2019-10-185-26/+207
| | | | | | | | | | | | | | | The patch adds config MT8183_DRAM_DVFS to enable DRAM calibration with multiple frequencies to support DVFS switch. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I97c8e513dc3815a2d62b2904a246a1d8567704a4 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Adjust DRAM voltages for each DRAM frequencyHuayang Duan2019-10-181-0/+28
| | | | | | | | | | | | | | | This patch supports voltage adjustment for each DRAM frequency, which is neccesary to support DVFS switch. BUG=b:80501386,b:142358843 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I9539473ff708f9d0d39eb17bd3fdcb916265d33e Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Allow modifying vddq voltageHsin-Hsiung Wang2019-10-182-0/+108
| | | | | | | | | | | | | | | | DRAM DVFS needs to be calibrated with different vddq voltages to get correct parameters. A new API is added to allow changing vddq voltage. BUG=b:80501386 BRANCH=none TEST=measure vddq voltage with multimeter Change-Id: I5f0d82596a1709bf0d37885f257646133f18f210 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35147 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8183: Allow modifying vdram1 voltageHsin-Hsiung Wang2019-10-182-0/+26
| | | | | | | | | | | | | | | | DRAM DVFS needs to be calibrated with different vdram1 voltages to get correct parameters. A new API is added to allow changing vdram1 voltage. BUG=b:80501386 BRANCH=none TEST=measure vdram1 voltage with multimeter Change-Id: Ia15ab3a2e1668e5b4873d317b57a38ebee037709 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33186 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8183: Share console for calibration blob outputHung-Te Lin2019-10-182-0/+2
| | | | | | | | | | | | | | | | | | | | | | Most coreboot debug messages are sent to UART and cbmem console, and we also want to collect DRAM calibration module output, especially for cbmem console (so we can see the logs after kernel is up). Instead of sharing whole cbmem/cbtable/cbmemconsole implementations, we want to simplify that by a simple function pointer so output can be preserved by do_putchar, which internally sends data to all registered consoles (usually cbmem console and UART). BUG=b:139099592 TEST=make; boots properly for full-k, with and without serial console. BRANCH=kukui Change-Id: I1cf16711caf3831e99e17b522b86694524425116 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36056 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8183: Verify checksum of cached calibration dataYu-Ping Wu2019-10-172-1/+17
| | | | | | | | | | | | | | | | The checksum is stored in the header of calibration data and saved to SPI flash. After reading the data from flash, checksum is used to verify the integrity of the calibration parameters. BUG=b:139099592 BRANCH=kukui TEST=Calibration data successfully loaded from flash Change-Id: Ie4a0688ed6e560d4c0c6b316f44e52fd10d71a9d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Remove unnecessary DRAM register settingsYu-Ping Wu2019-10-171-12/+5
| | | | | | | | | | | | | | | In broadcast mode we only need to set registers for channel 0 instead of all channels. BUG=none BRANCH=kukui TEST=emerge-kukui coreboot Change-Id: I22a4b69fd40d1978fa7b12e8edaba00ce5d7787d Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Fix DDR phy config numberYu-Ping Wu2019-10-171-2/+2
| | | | | | | | | | | | | | Some typos are fixed to make DVFS switch work. BUG=b:142358843 BRANCH=kukui TEST=emerge-kukui coreboot Change-Id: I064d4a2c46187ac5780352da742bd56e82c22c14 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Refactor DRAM init by bit fields APIHung-Te Lin2019-10-174-715/+284
| | | | | | | | | | | Replace the magic clrsetbits_le32, read32, write32 by SET_BITFIELDS and other bit field helpers. Change-Id: I327297dd10718fbef7275fe95c95d00d3ab6ac84 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35471 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8183: Improve code formattingYu-Ping Wu2019-10-174-80/+55
| | | | | | | | | | | | | | | | | | | | | | This patch contains some minor changes including: - Use lowercase hex literals - Combine short lines - Remove unnecessary curly braces - Simplify struct initialization - Leverage macro _SELPH_DQS_BITS - Ensure whitespaces around binary operators - Remove extra whitespaces after commas - Change log level and remove unnecessary debug logs BUG=none BRANCH=kukui TEST=emerge-kukui coreboot Change-Id: I33616e6142325920c2fd7e6dc1dc88eb29c5cf34 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Handle memory test failureYu-Ping Wu2019-10-175-20/+39
| | | | | | | | | | | | | | | | | | | | | | | If DRAM calibration fails or mem test fails using the cached calibration results stored in flash, rerun DRAM full calibration. If partial calibration fails or the mem test following it fails, hang forever. Partial calibration acts as a fallback approach in case of full calibration failure. Therefore, if it fails, there would be no other ways to initialize DRAM. Instead of falling into reboot loop and draining out of battery, it is better to just hang so that the end user may notice that and send to RMA. BUG=b:80501386,b:139099592 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I8e1d4f5bc7b45f45a8bfef74e86ec0ff6a556af4 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35481 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/sifive/fu540: test and fix code of fu540 spiXiang Wang2019-10-161-2/+27
| | | | | | | | | | | | I tested the SPI through the SD card and fixed sd card communication problem. Added two functions (claim_bus and release_bus). Setting CS signal is invalid by default. Change-Id: I60033a148c21bbd5b4946580f6cab0b439d346c6 Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* mainboard/ocp/monolake: Hide IIO root ports before memory initAndrey Petrov2019-10-164-24/+45
| | | | | | | | | | | | | | It turned on some SKUs FSP hangs in Notify stage if IIO root ports are disabled after MemoryInit. To address that hide IIO root ports earlier in romstage. TEST=the patch was ran on affected HW and success was reported Change-Id: I6a2a405f729df14f46bcf34a24e66e8ba9415f9d Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
* intel/broadwell: Hook libgfxinit upNico Huber2019-10-161-0/+7
| | | | | | | | | | | | | | As VGA_ROM_RUN and libgfxinit are mutually exclusive in Kconfig, we don't have to guard all the VGA BIOS if's and can assume gfx_get_init_done() returns 0 until all the quirks are handled. Then, we can run libgfxinit. Change-Id: Id5d0c2c12b1ff8f95ba4e0223a3e9aff27547acd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
* intel/broadwell: Implement proper backlight PWM configNico Huber2019-10-162-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port the backlight-PWM handling from Skylake instead of the previously used Haswell version. We use a 200Hz PWM signal for all boards. Which is higher than the previous devicetree value, 183Hz, but that was over- ridden by the VBIOS anyway. 200Hz is still very low, considering LED backlights, but accurate values are unknown at this time. Lynx Point, the PCH for Haswell and Broadwell, is a transition point for the backlight-PWM config. On platforms with a PCH, we have: o Before Lynx Point: The CPU has no PWM pin and sends the PWM duty-cycle setting to the PCH. The PCH can choose to ignore that and use its own setting (BLM_PCH_OVERRIDE_ENABLE). We use the CPU setting on these platforms. o Lynx Point + Haswell: The CPU has an additional PWM pin but can be set up to send its setting to the PCH as before. The PCH can still choose to ignore that. We use the CPU setting with Haswell. o Lynx Point + Broadwell: The CPU can't send its setting to the PCH anymore. BLM_PCH_ OVERRIDE_ENABLE must always be set(!) if the PCH PWM pin is used (it virtually always is). We have to use the PCH setting in this case. o After Lynx Point: Same as with Broadwell, only BLM_PCH_OVERRIDE_ENABLE is implied and the bit not implemented anymore. Change-Id: I1d61d9b3f1802ebe18799fc4d06f1f1d3b54c924 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
* soc/intel/skylake/chip: Unhide P2SB devicePatrick Rudolph2019-10-152-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | APL unhides the P2SB device in coreboot already. Do the same on SKL/KBL. As the coreboot PCI allocator needs to be able to find the device, unhide it after FSP-S. The device is hidden in the SoC finalize function already and not visible in the OS, as more P2SB device IDs have been added. Other SoCs aren't updated, because they are too broken. Fixes "BUG: XXX requests hidden ...." warnings in coreboot log. Tested on Supermicro X11SSH-TF. Change-Id: I0d14646098c34d3bf5cd49c35dcfcdce2c57431d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner
* soc/intel/common/block/sgx: Fix crash in MP initPatrick Rudolph2019-10-152-6/+50
| | | | | | | | | | | | | | | | | | | | | | | On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written when already locked by the sibling thread. In addition it loads microcode updates on all threads. To prevent such race conditions only call the code on one thread, such that the MSRs are only written once per core and the microcode is only loaded once for each core. Also add comments that describe the scope of the MSR that is being written to and mention the Intel documents used for reference. Fixes crash in SGX MP init. Tested on Supermicro X11SSH-TF. Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/intel: sgx: get rid of UEFI-style usage of global variableMichael Niewöhner2019-10-105-59/+19
| | | | | | | | | | Rework SGX enable status in a clean way without using a global variable. Change-Id: Ida6458eb46708df8fd238122aed41b57ca48c15b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
* soc/qualcomm: Remove default ops to generate bootblock.binArthur Heymans2019-10-092-8/+0
| | | | | | | | | | | | | This is done by default in the main Makefile.inc. TEST: With BUILD_TIMELESS=1 the resulting binary is identical before and after the change. Change-Id: Ie85e023df1f1c2b0f115e4f92719a511f60019c3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
* soc/mediatek/mt8183: Change argument type of mt_set_emiYu-Ping Wu2019-10-093-9/+10
| | | | | | | | | | | | | | | Since struct dramc_param has been defined, we can pass the struct directly from mt_mem_init(). BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: If7333fb579eff76dd9d1c2bf6fdfe7eccb22050f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35846 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan2019-10-093-5/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Load the calibration params from flash first and check the correctness of the params. If the params have correct format, perform DRAM fast calibration with these params to reduce bootup time. Otherwise, load the DRAM blob and perform DRAM full calibration. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan2019-10-096-195/+394
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Load calibration params from flash. If the format of the params is correct, use these calibration params for fast calibration to reduce the bootup time. Bootup time of DRAM partial calibration: - 1,349,385 usecs with low frequency - 924,698 usecs with middle frequency - 1,270,089 usecs with high frequency 3,544,172 usecs in total. Bootup time of DRAM fast calibration: - 216,663 usecs with low frequency - 328,220 usecs with middle frequency - 322,612 usecs with high frequency 867,495 usecs in total. BUG=b:139099592 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/mediatek/mt8183: Add the shared 'dramc_param' moduleYu-Ping Wu2019-10-093-0/+137
| | | | | | | | | | | | | | | | The dramc_param module simplifies the communication between coreboot and MTK DRAM full calibration blob, and is shared by both implementations to ensure the same format of parameters. BUG=b:139099592 BRANCH=none TEST=emerge-kukui coreboot Change-Id: I4cfd634da1855a76706aab0b050197251e2ed4dd Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
* soc/mediatek/mt8183: Simplify usage of dramc_engine2_endYu-Ping Wu2019-10-091-10/+7
| | | | | | | | | | | | | | | | Since we always write to &ch[chn].ao.dummy_rd after calling dramc_engine2_end(), this write could be merged into dramc_engine2_end() to simplify code. BUG=none BRANCH=none TEST=emerge-kukui coreboot Change-Id: Ibb4bd5ed016118811ad2097098417c19f00f4263 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35749 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* device: Use scan_static_bus() over scan_lpc_bus()Nico Huber2019-10-0810-10/+10
| | | | | | | | | | | | | | Devices behind LPC can expose more buses (e.g. I2C on a super-i/o). So we should scan buses on LPC devices, too. Change-Id: I0eb005e41b9168fffc344ee8e666d43b605a30ba Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29474 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* device/root_device: Consolidate common _scan_bus() functionsNico Huber2019-10-083-3/+3
| | | | | | | | | | | scan_usb_bus() and root_dev_scan_bus() had the very same implementation. So rename the latter to scan_static_bus() and use that for both cases. Change-Id: If0aba9c690b23e3716f2d47ff7a8c3e8f6d82679 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31901 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* device: Rename scan_static_bus() -> enable_static_devices()Nico Huber2019-10-072-2/+2
| | | | | | | | | | | | | The new name should reflect better what this function does, as that is only one specific step of the scanning. Change-Id: I9c9dc437b6117112bb28550855a2c38044dfbfa5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31900 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* intel/fsp_broadwell_de: Rename from xx_DEV_FUNCKyösti Mälkki2019-10-063-24/+5
| | | | | | | | | | | | | | Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: I1a8675a4e613a8efc135b05cde36f166acaa7ed4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
* soc/intel/common/block/p2sb/p2sb: Add missing PCI IDsPatrick Rudolph2019-10-051-0/+5
| | | | | | | | | | | | | | | The code is compiled on SKL/KBL, but the P2SB PCI IDs were missing. Add them to make sure that the BAR0 doesn't change when running PCI resource allocation. Change-Id: I7cffbbc7d15dad14cccd122a081099b51dc1ce07 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
* intel/fsp_baytrail: Define PCH_DEV_SLOT_I2C1Kyösti Mälkki2019-10-052-3/+5
| | | | | | | | Change-Id: I02c08b847fa1523e3296bdf9e3db5a7a322df72e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
* intel/fsp_baytrail: Rename from xx_DEV_FUNCKyösti Mälkki2019-10-054-65/+63
| | | | | | | | | | | | | Intel adopted xx_DEVFN_xx naming for macros expanding to PCI_DEVFN() starting with apollolake. The ones named xx_DEV_FUNC are being renamed, or dropped, if they were generally not used at all for a platform. Change-Id: Id78e594ae6490d39df76317f8fc3381fe681dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
* devicetree: Fix improper use of chip_operationsKyösti Mälkki2019-10-041-0/+4
| | | | | | | | | | | | | | | | | Auto-discoverable PCI devices do not require field .enable_dev of chip_operations to be set. They are matched with PCI drivers by the use of PCI vendor and device ID fields. The name given for the chip_operations struct must match the pathname the way it is present in the devicetree.cb files. If there was no match, util/sconfig would currently choose to use the empty weak declaration it creates in static.c file. Change-Id: I684a087a1f8ee4e1a5fd83450cd371fcfdbb6847 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
* soc/cavium/common/Makefile: Convert STACK_SIZE value to decimalElyes HAOUAS2019-10-041-1/+2
| | | | | | | | | | | | STACK_SIZE value needs to be changed from hex to decimal, since -Wstack-usage doesn't recognize hexadecimal numbers anymore. Change-Id: I73606d347194af5de5882a3387a4a5db17f9d94b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* soc/skl/vr_config: fix KBL-U GT3 detection bugMaxim Polyakov2019-10-041-2/+4
| | | | | | | | | | | | | | | | | | Some VR parameter values for KBL-U with GT3 graphics are different from values for other CPUs in this series [1]. However, GT3 iGPU will never be detected, since the igd_id variable is compared with the LPC device PCI ID. The patch fixes this bug. [1] page 109, 7th Generation Intel(R) Processor Families for U/Y Platforms and 8th Generation Intel(R) Processor Family for U Quad Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019. Document Number: 334661-006 Change-Id: I33527d90550a1de78c9375d3d3b0e046787a559b Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 10:45:39 +0000