1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 secunet Security Networks AG
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <types.h>
#include <arch/io.h>
#include <halt.h>
#include "gm45.h"
void gm45_early_reset(void/*const timings_t *const timings*/)
{
int ch, r;
/* Reset DRAM power-up settings in CLKCFG (they are not
affected by system reset but may disrupt raminit). */
MCHBAR32(CLKCFG_MCHBAR) =
(MCHBAR32(CLKCFG_MCHBAR) & ~(3 << 21)) | (1 << 3);
/*\ Next settings are the real purpose of this function:
If these steps are not performed, reset results in power off. \*/
/* Initialize some DRAM settings to 1 populated rank of 128MB. */
FOR_EACH_CHANNEL(ch) {
/* Configure DRAM control mode. */
MCHBAR32(CxDRC0_MCHBAR(ch)) =
(MCHBAR32(CxDRC0_MCHBAR(ch)) & ~CxDRC0_RANKEN_MASK) |
(ch ? 0 : CxDRC0_RANKEN(0));
MCHBAR32(CxDRC1_MCHBAR(ch)) =
(MCHBAR32(CxDRC1_MCHBAR(ch)) | CxDRC1_NOTPOP_MASK) &
~(ch ? 0 : CxDRC1_NOTPOP(0));
MCHBAR32(CxDRC2_MCHBAR(ch)) =
(MCHBAR32(CxDRC2_MCHBAR(ch)) | CxDRC2_NOTPOP_MASK) &
~(ch ? 0 : CxDRC2_NOTPOP(0));
/*if (timings && (timings->mem_clock == MEM_CLOCK_1067MT))
MCHBAR32(CxDRC2_MCHBAR(ch)) |= CxDRC2_CLK1067MT;*/
/* Program rank boundaries (CxDRBy). */
for (r = 0; r < RANKS_PER_CHANNEL; r += 2)
MCHBAR32(CxDRBy_MCHBAR(ch, r)) =
CxDRBy_BOUND_MB(r, 128) |
CxDRBy_BOUND_MB(r+1, 128);
}
/* Set DCC mode to no operation and do magic 0xf0 thing. */
MCHBAR32(DCC_MCHBAR) =
(MCHBAR32(DCC_MCHBAR) & ~DCC_CMD_MASK) | DCC_CMD_NOP;
u8 reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0);
pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 & ~(1 << 2));
reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf0);
pci_write_config8(PCI_DEV(0, 0, 0), 0xf0, reg8 | (1 << 2));
/* Normally, we would set this after successful raminit. */
MCHBAR32(DCC_MCHBAR) |= (1 << 19);
/* Perform system reset through CF9 interface. */
outb(0x02, 0xcf9); /* Set system reset bit. */
outb(0x06, 0xcf9); /* Set CPU reset bit, too. */
halt();
}
|
