blob: ede210852c48fd90bdc30dfe8b73bab3c50f1e0c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef AMD_PICASSO_SOUTHBRIDGE_H
#define AMD_PICASSO_SOUTHBRIDGE_H
#include <types.h>
#include <device/device.h>
#include <device/pci_def.h>
#include <soc/iomap.h>
/*
* AcpiMmio Region
* - fixed addresses offset from 0xfed80000
*/
/* Power management registers: 0xfed80300 or index/data at IO 0xcd6/cd7 */
#define PM_PCI_CTRL 0x08
#define FORCE_SLPSTATE_RETRY BIT(25)
#define PWR_RESET_CFG 0x10
#define TOGGLE_ALL_PWR_GOOD BIT(1)
#define PM_SERIRQ_CONF 0x54
#define PM_SERIRQ_NUM_BITS_17 0x0000
#define PM_SERIRQ_NUM_BITS_18 0x0004
#define PM_SERIRQ_NUM_BITS_19 0x0008
#define PM_SERIRQ_NUM_BITS_20 0x000c
#define PM_SERIRQ_NUM_BITS_21 0x0010
#define PM_SERIRQ_NUM_BITS_22 0x0014
#define PM_SERIRQ_NUM_BITS_23 0x0018
#define PM_SERIRQ_NUM_BITS_24 0x001c
#define PM_SERIRQ_MODE BIT(6)
#define PM_SERIRQ_ENABLE BIT(7)
#define PM_RTC_SHADOW 0x5b /* state when power resumes */
#define PM_S5_AT_POWER_RECOVERY 0x04 /* S5 */
#define PM_RESTORE_S0_IF_PREV_S0 0x07 /* S0 if previously at S0 */
#define PM_EVT_BLK 0x60
#define WAK_STS BIT(15) /*AcpiPmEvtBlkx00 Pm1Status */
#define PCIEXPWAK_STS BIT(14)
#define RTC_STS BIT(10)
#define PWRBTN_STS BIT(8)
#define GBL_STS BIT(5)
#define BM_STS BIT(4)
#define TIMER_STS BIT(0)
#define PCIEXPWAK_DIS BIT(14) /*AcpiPmEvtBlkx02 Pm1Enable */
#define RTC_EN BIT(10)
#define PWRBTN_EN BIT(8)
#define GBL_EN BIT(5)
#define TIMER_STS BIT(0)
#define PM1_CNT_BLK 0x62
#define PM_TMR_BLK 0x64
#define PM_CPU_CTRL 0x66
#define PM_GPE0_BLK 0x68
#define PM_ACPI_SMI_CMD 0x6a
#define PM_ACPI_CONF 0x74
#define PM_ACPI_DECODE_STD BIT(0)
#define PM_ACPI_GLOBAL_EN BIT(1)
#define PM_ACPI_RTC_EN_EN BIT(2)
#define PM_ACPI_TIMER_EN_EN BIT(4)
#define PM_ACPI_MASK_ARB_DIS BIT(6)
#define PM_ACPI_BIOS_RLS BIT(7)
#define PM_ACPI_PWRBTNEN_EN BIT(8)
#define PM_ACPI_REDUCED_HW_EN BIT(9)
#define PM_ACPI_BLOCK_PCIE_PME BIT(24)
#define PM_ACPI_PCIE_WAK_MASK BIT(25)
#define PM_ACPI_WAKE_AS_GEVENT BIT(27)
#define PM_ACPI_NB_PME_GEVENT BIT(28)
#define PM_ACPI_RTC_WAKE_EN BIT(29)
#define PM_LPC_GATING 0xec
#define PM_LPC_AB_NO_BYPASS_EN BIT(2)
#define PM_LPC_A20_EN BIT(1)
#define PM_LPC_ENABLE BIT(0)
#define PM1_LIMIT 16
#define GPE0_LIMIT 32
#define TOTAL_BITS(a) (8 * sizeof(a))
/* FCH MISC Registers 0xfed80e00 */
#define GPP_CLK_CNTRL 0x00
#define GPP_CLK0_REQ_SHIFT 0
#define GPP_CLK1_REQ_SHIFT 2
#define GPP_CLK4_REQ_SHIFT 4
#define GPP_CLK2_REQ_SHIFT 6
#define GPP_CLK3_REQ_SHIFT 8
#define GPP_CLK5_REQ_SHIFT 10
#define GPP_CLK6_REQ_SHIFT 12
#define GPP_CLK_OUTPUT_COUNT 7
#define GPP_CLK_REQ_MASK(clk_shift) (0x3 << (clk_shift))
#define GPP_CLK_REQ_ON(clk_shift) (0x3 << (clk_shift))
#define GPP_CLK_REQ_EXT(clk_shift) (0x1 << (clk_shift))
#define GPP_CLK_REQ_OFF(clk_shift) (0x0 << (clk_shift))
#define MISC_CGPLL_CONFIG1 0x08
#define CG1PLL_SPREAD_SPECTRUM_ENABLE BIT(0)
#define MISC_CLK_CNTL1 0x40
#define BP_X48M0_OUTPUT_EN BIT(2) /* 1=En, unlike Hudson, Kern */
#define MISC_I2C0_PAD_CTRL 0xd8
#define MISC_I2C1_PAD_CTRL 0xdc
#define MISC_I2C2_PAD_CTRL 0xe0
#define MISC_I2C3_PAD_CTRL 0xe4
#define I2C_PAD_CTRL_NG_MASK (BIT(0) + BIT(1) + BIT(2) + BIT(3))
#define I2C_PAD_CTRL_NG_NORMAL 0xc
#define I2C_PAD_CTRL_RX_SEL_MASK (BIT(4) + BIT(5))
#define I2C_PAD_CTRL_RX_SHIFT 4
#define I2C_PAD_CTRL_RX_SEL_OFF (0 << I2C_PAD_CTRL_RX_SHIFT)
#define I2C_PAD_CTRL_RX_SEL_3_3V (1 << I2C_PAD_CTRL_RX_SHIFT)
#define I2C_PAD_CTRL_RX_SEL_1_8V (3 << I2C_PAD_CTRL_RX_SHIFT)
#define I2C_PAD_CTRL_PULLDOWN_EN BIT(6)
#define I2C_PAD_CTRL_FALLSLEW_MASK (BIT(7) + BIT(8))
#define I2C_PAD_CTRL_FALLSLEW_SHIFT 7
#define I2C_PAD_CTRL_FALLSLEW_STD (0 << I2C_PAD_CTRL_FALLSLEW_SHIFT)
#define I2C_PAD_CTRL_FALLSLEW_LOW (1 << I2C_PAD_CTRL_FALLSLEW_SHIFT)
#define I2C_PAD_CTRL_FALLSLEW_EN BIT(9)
#define I2C_PAD_CTRL_SPIKE_RC_EN BIT(10)
#define I2C_PAD_CTRL_SPIKE_RC_SEL BIT(11) /* 0 = 50ns, 1 = 20ns */
#define I2C_PAD_CTRL_CAP_DOWN BIT(12)
#define I2C_PAD_CTRL_CAP_UP BIT(13)
#define I2C_PAD_CTRL_RES_DOWN BIT(14)
#define I2C_PAD_CTRL_RES_UP BIT(15)
#define I2C_PAD_CTRL_BIOS_CRT_EN BIT(16)
#define I2C_PAD_CTRL_SPARE0 BIT(17)
#define I2C_PAD_CTRL_SPARE1 BIT(18)
/* FCH AOAC device offsets for AOAC_DEV_D3_CTL/AOAC_DEV_D3_STATE */
#define FCH_AOAC_DEV_CLK_GEN 0
#define FCH_AOAC_DEV_I2C2 7
#define FCH_AOAC_DEV_I2C3 8
#define FCH_AOAC_DEV_I2C4 9
#define FCH_AOAC_DEV_UART0 11
#define FCH_AOAC_DEV_UART1 12
#define FCH_AOAC_DEV_UART2 16
#define FCH_AOAC_DEV_AMBA 17
#define FCH_AOAC_DEV_UART3 26
#define FCH_AOAC_DEV_ESPI 27
#define FCH_LEGACY_UART_DECODE (ALINK_AHB_ADDRESS + 0x20) /* 0xfedc0020 */
/* SATA Controller D11F0 */
#define SATA_MISC_CONTROL_REG 0x40
#define SATA_MISC_SUBCLASS_WREN BIT(0)
/* Register in AHCIBaseAddress (BAR5 at D11F0x24) */
#define SATA_CAPABILITIES_REG 0xfc
#define SATA_CAPABILITY_SPM BIT(12)
/* IO 0xf0 NCP Error */
#define NCP_WARM_BOOT BIT(7) /* Write-once */
/* this is for the devicetree setting and not the values written to the register */
enum gpp_clk_req_setting {
GPP_CLK_ON, /* GPP clock always on; default */
GPP_CLK_REQ, /* GPP clock controlled by corresponding #CLK_REQx pin */
GPP_CLK_OFF, /* GPP clk off */
};
typedef struct aoac_devs {
unsigned int :7;
unsigned int ic2e:1; /* 7: I2C2 */
unsigned int ic3e:1; /* 8: I2C3 */
unsigned int ic4e:1; /* 9: I2C4 */
unsigned int :1;
unsigned int ut0e:1; /* 11: UART0 */
unsigned int ut1e:1; /* 12: UART1 */
unsigned int :3;
unsigned int ut2e:1; /* 16: UART2 */
unsigned int :9;
unsigned int ut3e:1; /* 26: UART3 */
unsigned int espi:1; /* 27: ESPI */
unsigned int :4;
} __packed aoac_devs_t;
void fch_pre_init(void);
void fch_early_init(void);
void fch_init(void *chip_info);
void fch_final(void *chip_info);
void enable_aoac_devices(void);
void wait_for_aoac_enabled(unsigned int dev);
void sb_clk_output_48Mhz(void);
/* Allow the board to change the default I2C pad configuration */
void mainboard_i2c_override(int bus, uint32_t *pad_settings);
#endif /* AMD_PICASSO_SOUTHBRIDGE_H */
|
