ArmPkg: Introduce SCMI protocol

This change introduces a new SCMI protocol driver for
Arm systems. The driver currently supports only clock
and performance management protocols. Other protocols
will be added as and when needed.

Clock management protocol is used to configure various clocks
available on the platform e.g. HDLCD clock on the Juno platforms.

Whereas performance management protocol allows adjustment
of various performance domains. Currently this is used to evaluate
performance of the Juno platform.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

1 files changed, 418 insertions, 0 deletions

diff --git a/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
new file mode 100644
index 0000000000..64d2afab72
--- /dev/null
+++ b/ArmPkg/Drivers/ArmScmiDxe/ScmiClockProtocol.c
@@ -0,0 +1,418 @@
+/** @file

+

+  Copyright (c) 2017-2018, Arm Limited. All rights reserved.

+

+  This program and the accompanying materials

+  are licensed and made available under the terms and conditions of the BSD License

+  which accompanies this distribution.  The full text of the license may be found at

+  http://opensource.org/licenses/bsd-license.php

+

+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+

+  System Control and Management Interface V1.0

+    http://infocenter.arm.com/help/topic/com.arm.doc.den0056a/

+    DEN0056A_System_Control_and_Management_Interface.pdf

+**/

+

+#include <Library/BaseLib.h>

+#include <Library/DebugLib.h>

+#include <Library/UefiBootServicesTableLib.h>

+#include <Protocol/ArmScmiClockProtocol.h>

+

+#include "ArmScmiClockProtocolPrivate.h"

+#include "ScmiPrivate.h"

+

+/** Convert to 64 bit value from two 32 bit words.

+

+  @param[in] Low   Lower 32 bits.

+  @param[in] High  Higher 32 bits.

+

+  @retval UINT64   64 bit value.

+**/

+STATIC

+UINT64

+ConvertTo64Bit (

+  IN UINT32 Low,

+  IN UINT32 High

+  )

+{

+   return (Low | ((UINT64)High << 32));

+}

+

+/** Return version of the clock management protocol supported by SCP firmware.

+

+  @param[in]  This     A Pointer to SCMI_CLOCK_PROTOCOL Instance.

+

+  @param[out] Version  Version of the supported SCMI Clock management protocol.

+

+  @retval EFI_SUCCESS       The version is returned.

+  @retval EFI_DEVICE_ERROR  SCP returns an SCMI error.

+  @retval !(EFI_SUCCESS)    Other errors.

+**/

+STATIC

+EFI_STATUS

+ClockGetVersion (

+  IN  SCMI_CLOCK_PROTOCOL  *This,

+  OUT UINT32               *Version

+  )

+{

+  return ScmiGetProtocolVersion (SCMI_PROTOCOL_ID_CLOCK, Version);

+}

+

+/** Return total number of clock devices supported by the clock management

+  protocol.

+

+  @param[in]  This         A Pointer to SCMI_CLOCK_PROTOCOL Instance.

+

+  @param[out] TotalClocks  Total number of clocks supported.

+

+  @retval EFI_SUCCESS       Total number of clocks supported is returned.

+  @retval EFI_DEVICE_ERROR  SCP returns an SCMI error.

+  @retval !(EFI_SUCCESS)    Other errors.

+**/

+STATIC

+EFI_STATUS

+ClockGetTotalClocks (

+  IN  SCMI_CLOCK_PROTOCOL  *This,

+  OUT UINT32               *TotalClocks

+  )

+{

+  EFI_STATUS  Status;

+  UINT32     *ReturnValues;

+

+  Status = ScmiGetProtocolAttributes (SCMI_PROTOCOL_ID_CLOCK, &ReturnValues);

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+

+  *TotalClocks = SCMI_CLOCK_PROTOCOL_TOTAL_CLKS (ReturnValues[0]);

+

+  return EFI_SUCCESS;

+}

+

+/** Return attributes of a clock device.

+

+  @param[in]  This        A Pointer to SCMI_CLOCK_PROTOCOL Instance.

+  @param[in]  ClockId     Identifier for the clock device.

+

+  @param[out] Enabled         If TRUE, the clock device is enabled.

+  @param[out] ClockAsciiName  A NULL terminated ASCII string with the clock

+                              name, of up to 16 bytes.

+

+  @retval EFI_SUCCESS          Clock device attributes are returned.

+  @retval EFI_DEVICE_ERROR     SCP returns an SCMI error.

+  @retval !(EFI_SUCCESS)       Other errors.

+**/

+STATIC

+EFI_STATUS

+ClockGetClockAttributes (

+  IN  SCMI_CLOCK_PROTOCOL  *This,

+  IN  UINT32               ClockId,

+  OUT BOOLEAN              *Enabled,

+  OUT CHAR8                *ClockAsciiName

+  )

+{

+  EFI_STATUS          Status;

+

+  UINT32              *MessageParams;

+  CLOCK_ATTRIBUTES    *ClockAttributes;

+  SCMI_COMMAND        Cmd;

+  UINT32              PayloadLength;

+

+  Status = ScmiCommandGetPayload (&MessageParams);

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+

+  *MessageParams = ClockId;

+

+  Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK;

+  Cmd.MessageId  = SCMI_MESSAGE_ID_CLOCK_ATTRIBUTES;

+

+  PayloadLength = sizeof (ClockId);

+

+  Status = ScmiCommandExecute (

+             &Cmd,

+             &PayloadLength,

+             (UINT32**)&ClockAttributes

+             );

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+   // TRUE if bit 0 of ClockAttributes->Attributes is set.

+  *Enabled = CLOCK_ENABLED (ClockAttributes->Attributes);

+

+  AsciiStrCpyS (

+    ClockAsciiName,

+    SCMI_MAX_STR_LEN,

+    (CONST CHAR8*)ClockAttributes->ClockName

+    );

+

+  return EFI_SUCCESS;

+}

+

+/** Return list of rates supported by a given clock device.

+

+  @param[in] This        A pointer to SCMI_CLOCK_PROTOCOL Instance.

+  @param[in] ClockId     Identifier for the clock device.

+

+  @param[out] Format      SCMI_CLOCK_RATE_FORMAT_DISCRETE: Clock device

+                          supports range of clock rates which are non-linear.

+

+                          SCMI_CLOCK_RATE_FORMAT_LINEAR: Clock device supports

+                          range of linear clock rates from Min to Max in steps.

+

+  @param[out] TotalRates  Total number of rates.

+

+  @param[in,out] RateArraySize  Size of the RateArray.

+

+  @param[out] RateArray   List of clock rates.

+

+  @retval EFI_SUCCESS          List of clock rates is returned.

+  @retval EFI_DEVICE_ERROR     SCP returns an SCMI error.

+  @retval EFI_BUFFER_TOO_SMALL RateArraySize is too small for the result.

+                               It has been updated to the size needed.

+  @retval !(EFI_SUCCESS)       Other errors.

+**/

+STATIC

+EFI_STATUS

+ClockDescribeRates (

+  IN     SCMI_CLOCK_PROTOCOL     *This,

+  IN     UINT32                   ClockId,

+  OUT    SCMI_CLOCK_RATE_FORMAT  *Format,

+  OUT    UINT32                  *TotalRates,

+  IN OUT UINT32                  *RateArraySize,

+  OUT    SCMI_CLOCK_RATE         *RateArray

+  )

+{

+  EFI_STATUS             Status;

+

+  UINT32                 PayloadLength;

+  SCMI_COMMAND           Cmd;

+  UINT32                 *MessageParams;

+  CLOCK_DESCRIBE_RATES   *DescribeRates;

+  CLOCK_RATE_DWORD       *Rate;

+

+  UINT32                 RequiredArraySize = 0;

+  UINT32                 RateIndex = 0;

+  UINT32                 RateNo;

+  UINT32                 RateOffset;

+

+  *TotalRates = 0;

+

+  Status = ScmiCommandGetPayload (&MessageParams);

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+

+  Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK;

+  Cmd.MessageId  = SCMI_MESSAGE_ID_CLOCK_DESCRIBE_RATES;

+

+  *MessageParams++  = ClockId;

+

+  do {

+

+    *MessageParams = RateIndex;

+

+    // Set Payload length, note PayloadLength is a IN/OUT parameter.

+    PayloadLength  = sizeof (ClockId) + sizeof (RateIndex);

+

+    // Execute and wait for response on a SCMI channel.

+    Status = ScmiCommandExecute (

+               &Cmd,

+               &PayloadLength,

+               (UINT32**)&DescribeRates

+               );

+    if (EFI_ERROR (Status)) {

+      return Status;

+    }

+

+    if (*TotalRates == 0) {

+      // In the first iteration we will get number of returned rates and number

+      // of remaining rates. With this information calculate required size

+      // for rate array. If provided RateArraySize is less, return an

+      // error.

+

+      *Format = RATE_FORMAT (DescribeRates->NumRatesFlags);

+

+      *TotalRates = NUM_RATES (DescribeRates->NumRatesFlags)

+                    + NUM_REMAIN_RATES (DescribeRates->NumRatesFlags);

+

+      if (*Format == SCMI_CLOCK_RATE_FORMAT_DISCRETE) {

+         RequiredArraySize = (*TotalRates) * sizeof (UINT64);

+      } else {

+         // We need to return triplet of 64 bit value for each rate

+         RequiredArraySize = (*TotalRates) * 3 * sizeof (UINT64);

+      }

+

+      if (RequiredArraySize > (*RateArraySize)) {

+        *RateArraySize = RequiredArraySize;

+        return EFI_BUFFER_TOO_SMALL;

+      }

+    }

+

+    RateOffset = 0;

+

+    if (*Format == SCMI_CLOCK_RATE_FORMAT_DISCRETE) {

+      for (RateNo = 0; RateNo < NUM_RATES (DescribeRates->NumRatesFlags); RateNo++) {

+        Rate = &DescribeRates->Rates[RateOffset++];

+        // Non-linear discrete rates.

+        RateArray[RateIndex++].Rate = ConvertTo64Bit (Rate->Low, Rate->High);

+      }

+    } else {

+      for (RateNo = 0; RateNo < NUM_RATES (DescribeRates->NumRatesFlags); RateNo++) {

+        // Linear clock rates from minimum to maximum in steps

+        // Minimum clock rate.

+        Rate = &DescribeRates->Rates[RateOffset++];

+        RateArray[RateIndex].Min = ConvertTo64Bit (Rate->Low, Rate->High);

+

+        Rate = &DescribeRates->Rates[RateOffset++];

+        // Maximum clock rate.

+        RateArray[RateIndex].Max = ConvertTo64Bit (Rate->Low, Rate->High);

+

+        Rate = &DescribeRates->Rates[RateOffset++];

+        // Step.

+        RateArray[RateIndex++].Step = ConvertTo64Bit (Rate->Low, Rate->High);

+      }

+    }

+  } while (NUM_REMAIN_RATES (DescribeRates->NumRatesFlags) != 0);

+

+  // Update RateArraySize with RequiredArraySize.

+  *RateArraySize = RequiredArraySize;

+

+  return EFI_SUCCESS;

+}

+

+/** Get clock rate.

+

+  @param[in]  This        A Pointer to SCMI_CLOCK_PROTOCOL Instance.

+  @param[in]  ClockId     Identifier for the clock device.

+

+  @param[out]  Rate       Clock rate.

+

+  @retval EFI_SUCCESS          Clock rate is returned.

+  @retval EFI_DEVICE_ERROR     SCP returns an SCMI error.

+  @retval !(EFI_SUCCESS)       Other errors.

+**/

+STATIC

+EFI_STATUS

+ClockRateGet (

+  IN  SCMI_CLOCK_PROTOCOL  *This,

+  IN  UINT32               ClockId,

+  OUT UINT64               *Rate

+  )

+{

+  EFI_STATUS     Status;

+

+  UINT32            *MessageParams;

+  CLOCK_RATE_DWORD  *ClockRate;

+  SCMI_COMMAND      Cmd;

+

+  UINT32         PayloadLength;

+

+  Status = ScmiCommandGetPayload (&MessageParams);

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+

+  // Fill arguments for clock protocol command.

+  *MessageParams  = ClockId;

+

+  Cmd.ProtocolId  = SCMI_PROTOCOL_ID_CLOCK;

+  Cmd.MessageId   = SCMI_MESSAGE_ID_CLOCK_RATE_GET;

+

+  PayloadLength = sizeof (ClockId);

+

+  // Execute and wait for response on a SCMI channel.

+  Status = ScmiCommandExecute (

+             &Cmd,

+             &PayloadLength,

+             (UINT32**)&ClockRate

+             );

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+

+  *Rate = ConvertTo64Bit (ClockRate->Low, ClockRate->High);

+

+  return EFI_SUCCESS;

+}

+

+/** Set clock rate.

+

+  @param[in]  This        A Pointer to SCMI_CLOCK_PROTOCOL Instance.

+  @param[in]  ClockId     Identifier for the clock device.

+  @param[in]  Rate        Clock rate.

+

+  @retval EFI_SUCCESS          Clock rate set success.

+  @retval EFI_DEVICE_ERROR     SCP returns an SCMI error.

+  @retval !(EFI_SUCCESS)       Other errors.

+**/

+STATIC

+EFI_STATUS

+ClockRateSet (

+  IN SCMI_CLOCK_PROTOCOL  *This,

+  IN UINT32               ClockId,

+  IN UINT64               Rate

+  )

+{

+  EFI_STATUS                  Status;

+  CLOCK_RATE_SET_ATTRIBUTES   *ClockRateSetAttributes;

+  SCMI_COMMAND                Cmd;

+  UINT32                      PayloadLength;

+

+  Status = ScmiCommandGetPayload ((UINT32**)&ClockRateSetAttributes);

+  if (EFI_ERROR (Status)) {

+    return Status;

+  }

+

+  // Fill arguments for clock protocol command.

+  ClockRateSetAttributes->ClockId    = ClockId;

+  ClockRateSetAttributes->Flags      = CLOCK_SET_DEFAULT_FLAGS;

+  ClockRateSetAttributes->Rate.Low   = (UINT32)Rate;

+  ClockRateSetAttributes->Rate.High  = (UINT32)(Rate >> 32);

+

+  Cmd.ProtocolId = SCMI_PROTOCOL_ID_CLOCK;

+  Cmd.MessageId  = SCMI_MESSAGE_ID_CLOCK_RATE_SET;

+

+  PayloadLength = sizeof (CLOCK_RATE_SET_ATTRIBUTES);

+

+  // Execute and wait for response on a SCMI channel.

+  Status = ScmiCommandExecute (

+             &Cmd,

+             &PayloadLength,

+             NULL

+             );

+

+  return Status;

+}

+

+// Instance of the SCMI clock management protocol.

+STATIC CONST SCMI_CLOCK_PROTOCOL ScmiClockProtocol = {

+  ClockGetVersion,

+  ClockGetTotalClocks,

+  ClockGetClockAttributes,

+  ClockDescribeRates,

+  ClockRateGet,

+  ClockRateSet

+ };

+

+/** Initialize clock management protocol and install protocol on a given handle.

+

+  @param[in] Handle              Handle to install clock management protocol.

+

+  @retval EFI_SUCCESS            Clock protocol interface installed successfully.

+**/

+EFI_STATUS

+ScmiClockProtocolInit (

+  IN EFI_HANDLE* Handle

+  )

+{

+  return gBS->InstallMultipleProtocolInterfaces (

+                Handle,

+                &gArmScmiClockProtocolGuid,

+                &ScmiClockProtocol,

+                NULL

+                );

+}