diff options
author | vanjeff <vanjeff@6f19259b-4bc3-4df7-8a09-765794883524> | 2009-09-14 08:55:03 +0000 |
---|---|---|
committer | vanjeff <vanjeff@6f19259b-4bc3-4df7-8a09-765794883524> | 2009-09-14 08:55:03 +0000 |
commit | af4a63857cd189964cc2c6b53b54483efaba78a3 (patch) | |
tree | 791e8df39b79520e7e3c7cbb9bb33bc2d0bb89c5 /IntelFrameworkModulePkg | |
parent | 0cd118f7799602a88a5feb8ff1ef3e011a04b8ad (diff) | |
download | edk2-af4a63857cd189964cc2c6b53b54483efaba78a3.tar.gz edk2-af4a63857cd189964cc2c6b53b54483efaba78a3.tar.bz2 edk2-af4a63857cd189964cc2c6b53b54483efaba78a3.zip |
updated the Bus Driver that is able to create all or one of its child handles on each call to Start() not to create new child handle if RemainingDeviepath is the End of Device Path Node, per UEFI 2.3.
The others changes include:
1. Check RemainingDevicePath at beginning of Supported(), make sure it has been verified before Start() is called.
2. Check IO protocol firstly rather than EfiDevicePathProtocolGuid, reduce the times entering into Start() function because EfiDevicePathProtocolGuid existed on most of handle.
3. If no any child device is created on last time, and RemainingDevicePath is valid Uart Devcie path, go on creating child device handle based on this RemainingDevicePath.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9262 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'IntelFrameworkModulePkg')
-rw-r--r-- | IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/Serial.c | 186 | ||||
-rw-r--r-- | IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c | 10 |
2 files changed, 116 insertions, 80 deletions
diff --git a/IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/Serial.c b/IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/Serial.c index 47ec6b7b5e..a5ee00049e 100644 --- a/IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/Serial.c +++ b/IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/Serial.c @@ -144,18 +144,66 @@ SerialControllerDriverSupported ( EFI_STATUS Status;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_ISA_IO_PROTOCOL *IsaIo;
- UART_DEVICE_PATH UartNode;
+ UART_DEVICE_PATH *UartNode;
//
- // Ignore the RemainingDevicePath
+ // Check RemainingDevicePath validation
//
+ if (RemainingDevicePath != NULL) {
+ //
+ // Check if RemainingDevicePath is the End of Device Path Node,
+ // if yes, go on checking other conditions
+ //
+ if (!IsDevicePathEnd (RemainingDevicePath)) {
+ //
+ // If RemainingDevicePath isn't the End of Device Path Node,
+ // check its validation
+ //
+ Status = EFI_UNSUPPORTED;
+
+ UartNode = (UART_DEVICE_PATH *) RemainingDevicePath;
+ if (UartNode->Header.Type != MESSAGING_DEVICE_PATH ||
+ UartNode->Header.SubType != MSG_UART_DP ||
+ sizeof (UART_DEVICE_PATH) != DevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) UartNode)
+ ) {
+ goto Error;
+ }
+
+ if (UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
+ goto Error;
+ }
+
+ if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) {
+ goto Error;
+ }
+
+ if (UartNode->DataBits < 5 || UartNode->DataBits > 8) {
+ goto Error;
+ }
+
+ if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) {
+ goto Error;
+ }
+
+ if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) {
+ goto Error;
+ }
+
+ if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) {
+ goto Error;
+ }
+
+ Status = EFI_SUCCESS;
+ }
+ }
+
//
// Open the IO Abstraction(s) needed to perform the supported test
//
Status = gBS->OpenProtocol (
Controller,
- &gEfiDevicePathProtocolGuid,
- (VOID **) &ParentDevicePath,
+ &gEfiIsaIoProtocolGuid,
+ (VOID **) &IsaIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
@@ -168,22 +216,27 @@ SerialControllerDriverSupported ( return Status;
}
+ //
+ // Close the I/O Abstraction(s) used to perform the supported test
+ //
gBS->CloseProtocol (
Controller,
- &gEfiDevicePathProtocolGuid,
+ &gEfiIsaIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
+ //
+ // Open the EFI Device Path protocol needed to perform the supported test
+ //
Status = gBS->OpenProtocol (
Controller,
- &gEfiIsaIoProtocolGuid,
- (VOID **) &IsaIo,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
-
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
@@ -200,57 +253,14 @@ SerialControllerDriverSupported ( Status = EFI_UNSUPPORTED;
goto Error;
}
- //
- // Make sure RemainingDevicePath is valid
- //
- if (RemainingDevicePath != NULL) {
- Status = EFI_UNSUPPORTED;
- CopyMem (
- &UartNode,
- (UART_DEVICE_PATH *) RemainingDevicePath,
- sizeof (UART_DEVICE_PATH)
- );
- if (UartNode.Header.Type != MESSAGING_DEVICE_PATH ||
- UartNode.Header.SubType != MSG_UART_DP ||
- sizeof (UART_DEVICE_PATH) != DevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &UartNode)
- ) {
- goto Error;
- }
-
- if (UartNode.BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
- goto Error;
- }
-
- if (UartNode.Parity < NoParity || UartNode.Parity > SpaceParity) {
- goto Error;
- }
-
- if (UartNode.DataBits < 5 || UartNode.DataBits > 8) {
- goto Error;
- }
-
- if (UartNode.StopBits < OneStopBit || UartNode.StopBits > TwoStopBits) {
- goto Error;
- }
-
- if ((UartNode.DataBits == 5) && (UartNode.StopBits == TwoStopBits)) {
- goto Error;
- }
-
- if ((UartNode.DataBits >= 6) && (UartNode.DataBits <= 8) && (UartNode.StopBits == OneFiveStopBits)) {
- goto Error;
- }
-
- Status = EFI_SUCCESS;
- }
Error:
//
- // Close the I/O Abstraction(s) used to perform the supported test
+ // Close protocol, don't use device path protocol in the Support() function
//
gBS->CloseProtocol (
Controller,
- &gEfiIsaIoProtocolGuid,
+ &gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
@@ -281,11 +291,11 @@ SerialControllerDriverStart ( EFI_ISA_IO_PROTOCOL *IsaIo;
SERIAL_DEV *SerialDevice;
UINTN Index;
- UART_DEVICE_PATH Node;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
UINTN EntryCount;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
+ UART_DEVICE_PATH *UartNode;
SerialDevice = NULL;
//
@@ -328,9 +338,13 @@ SerialControllerDriverStart ( if (Status == EFI_ALREADY_STARTED) {
- if (RemainingDevicePath == NULL) {
+ if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) {
+ //
+ // If RemainingDevicePath is NULL or is the End of Device Path Node
+ //
return EFI_SUCCESS;
}
+
//
// Make sure a child handle does not already exist. This driver can only
// produce one child per serial port.
@@ -357,24 +371,44 @@ SerialControllerDriverStart ( EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
- CopyMem (&Node, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
+ UartNode = (UART_DEVICE_PATH *) RemainingDevicePath;
Status = SerialIo->SetAttributes (
SerialIo,
- Node.BaudRate,
+ UartNode->BaudRate,
SerialIo->Mode->ReceiveFifoDepth,
SerialIo->Mode->Timeout,
- (EFI_PARITY_TYPE) Node.Parity,
- Node.DataBits,
- (EFI_STOP_BITS_TYPE) Node.StopBits
+ (EFI_PARITY_TYPE) UartNode->Parity,
+ UartNode->DataBits,
+ (EFI_STOP_BITS_TYPE) UartNode->StopBits
);
}
break;
}
}
+ FreePool (OpenInfoBuffer);
- gBS->FreePool (OpenInfoBuffer);
- return Status;
+ if (Index < EntryCount) {
+ //
+ // If gEfiSerialIoProtocolGuid is opened by one child device, return
+ //
+ return Status;
+ }
+ //
+ // If gEfiSerialIoProtocolGuid is not opened by any child device,
+ // go further to create child device handle based on RemainingDevicePath
+ //
}
+
+ if (RemainingDevicePath != NULL) {
+ if (IsDevicePathEnd (RemainingDevicePath)) {
+ //
+ // If RemainingDevicePath is the End of Device Path Node,
+ // skip enumerate any device and return EFI_SUCESSS
+ //
+ return EFI_SUCCESS;
+ }
+ }
+
//
// Initialize the serial device instance
//
@@ -388,6 +422,21 @@ SerialControllerDriverStart ( SerialDevice->IsaIo = IsaIo;
SerialDevice->ParentDevicePath = ParentDevicePath;
+ //
+ // Check if RemainingDevicePath is NULL,
+ // if yes, use the values from the gSerialDevTempate as no remaining device path was
+ // passed in.
+ //
+ if (RemainingDevicePath != NULL) {
+ //
+ // If RemainingDevicePath isn't NULL,
+ // match the configuration of the RemainingDevicePath. IsHandleSupported()
+ // already checked to make sure the RemainingDevicePath contains settings
+ // that we can support.
+ //
+ CopyMem (&SerialDevice->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
+ }
+
AddName (SerialDevice, IsaIo);
for (Index = 0; SerialDevice->IsaIo->ResourceList->ResourceItem[Index].Type != EfiIsaAcpiResourceEndOfList; Index++) {
@@ -414,19 +463,6 @@ SerialControllerDriverStart ( goto Error;
}
- if (RemainingDevicePath != NULL) {
- //
- // Match the configuration of the RemainingDevicePath. IsHandleSupported()
- // already checked to make sure the RemainingDevicePath contains settings
- // that we can support.
- //
- CopyMem (&SerialDevice->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
- } else {
- //
- // Use the values from the gSerialDevTempate as no remaining device path was
- // passed in.
- //
- }
//
// Build the device path by appending the UART node to the ParentDevicePath.
//The Uart setings are zero here, since SetAttribute() will update them to match
diff --git a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c index 4bd4413242..588519de0d 100644 --- a/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c +++ b/IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBus.c @@ -194,7 +194,7 @@ IDEBusDriverBindingSupported ( }
//
- // If protocols were opened normally, closed it
+ // Close the I/O Abstraction(s) used to perform the supported test
//
gBS->CloseProtocol (
Controller,
@@ -428,7 +428,7 @@ IDEBusDriverBindingStart ( if (EnumAll || RemainingDevicePath == NULL) {
//
// If IdeInit->EnumAll is TRUE or RemainingDevicePath is NULL,
- // must enumerate all IDE device anyway
+ // must enumerate all IDE devices anyway
//
BeginningIdeChannel = IdePrimary;
EndIdeChannel = IdeSecondary;
@@ -437,8 +437,8 @@ IDEBusDriverBindingStart ( } else if (!IsDevicePathEnd (RemainingDevicePath)) {
//
- // RemainingDevicePath is the End of Device Path Node,
- // only scan the specified device by RemainingDevicePath.
+ // If RemainingDevicePath isn't the End of Device Path Node,
+ // only scan the specified device by RemainingDevicePath
//
Node = (EFI_DEV_PATH *) RemainingDevicePath;
BeginningIdeChannel = Node->Atapi.PrimarySecondary;
@@ -456,7 +456,7 @@ IDEBusDriverBindingStart ( } else {
//
- // If RemainingDevicePath is not the End of Device Path Node,
+ // If RemainingDevicePath is the End of Device Path Node,
// skip enumerate any device and return EFI_SUCESSS
//
BeginningIdeChannel = IdeMaxChannel;
|