MdeModulePkg/Bus/Sd: Fix various typos

Fix various typos in comments and documentation.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-16-philmd@redhat.com>

13 files changed, 33 insertions, 33 deletions

diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
index c60ac30421..19a0afcb6d 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHcMem.c
@@ -128,7 +128,7 @@ EmmcPeimAllocMemFromBlock (
     //

     // If current bit is zero, the corresponding memory unit is

     // available, otherwise we need to restart our searching.

-    // Available counts the consective number of zero bit.

+    // Available counts the consecutive number of zero bit.

     //

     if (!EMMC_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {

       Available++;

diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
index 679646eeb2..287a10266a 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.c
@@ -1290,7 +1290,7 @@ EmmcPeimExecTrb (
   BlkCount = 0;

   if (Trb->Mode != EmmcNoData) {

     //

-    // Calcuate Block Count.

+    // Calculate Block Count.

     //

     BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);

   }

@@ -2017,7 +2017,7 @@ EmmcPeimGetExtCsd (
   Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.

 

   @param[in] Slot           The slot number of the Emmc card to send the command to.

-  @param[in] Access         The access mode of SWTICH command.

+  @param[in] Access         The access mode of SWITCH command.

   @param[in] Index          The offset of the field to be access.

   @param[in] Value          The value to be set to the specified field of EXT_CSD register.

   @param[in] CmdSet         The value of CmdSet field of EXT_CSD register.

@@ -2273,7 +2273,7 @@ EmmcPeimSendTuningBlk (
 }

 

 /**

-  Tunning the clock to get HS200 optimal sampling point.

+  Tuning the clock to get HS200 optimal sampling point.

 

   Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the

   tuning procedure.

@@ -2509,7 +2509,7 @@ EmmcPeimSwitchToHighSpeed (
     return Status;

   }

   //

-  // Set to Hight Speed timing

+  // Set to High Speed timing

   //

   HostCtrl1 = BIT2;

   Status = EmmcPeimHcOrMmio (Slot->EmmcHcBase + EMMC_HC_HOST_CTRL1, sizeof (HostCtrl1), &HostCtrl1);

@@ -2658,7 +2658,7 @@ EmmcPeimSwitchToHS400 (
     return Status;

   }

   //

-  // Set to Hight Speed timing and set the clock frequency to a value less than 52MHz.

+  // Set to High Speed timing and set the clock frequency to a value less than 52MHz.

   //

   HsTiming = 1;

   Status = EmmcPeimSwitchClockFreq (Slot, Rca, HsTiming, 52);

@@ -2752,7 +2752,7 @@ EmmcPeimSetBusMode (
     BusWidth = 4;

   }

   //

-  // Get Deivce_Type from EXT_CSD register.

+  // Get Device_Type from EXT_CSD register.

   //

   Status = EmmcPeimGetExtCsd (Slot, &Slot->ExtCsd);

   if (EFI_ERROR (Status)) {

diff --git a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
index c0e461335f..4e3e51d144 100644
--- a/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
+++ b/MdeModulePkg/Bus/Sd/EmmcBlockIoPei/EmmcHci.h
@@ -244,7 +244,7 @@ EmmcPeimHcInitHost (
   Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.

 

   @param[in] Slot           The slot number of the Emmc card to send the command to.

-  @param[in] Access         The access mode of SWTICH command.

+  @param[in] Access         The access mode of SWITCH command.

   @param[in] Index          The offset of the field to be access.

   @param[in] Value          The value to be set to the specified field of EXT_CSD register.

   @param[in] CmdSet         The value of CmdSet field of EXT_CSD register.

diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
index 1b247af576..afdc0a57ef 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.c
@@ -9,7 +9,7 @@
 #include "EmmcDxe.h"

 

 /**

-  Nonblocking I/O callback funtion when the event is signaled.

+  Nonblocking I/O callback function when the event is signaled.

 

   @param[in]  Event     The Event this notify function registered to.

   @param[in]  Context   Pointer to the context data registered to the

@@ -785,7 +785,7 @@ Error:
   @retval EFI_WRITE_PROTECTED   The device can not be read/written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read/write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -954,7 +954,7 @@ EmmcReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -993,7 +993,7 @@ EmmcReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -1151,7 +1151,7 @@ EmmcReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -2058,7 +2058,7 @@ EmmcEraseBlocks (
 

     //

     // If the size to erase is smaller than the erase group size, the whole

-    // erase operation is performed by writting zeros.

+    // erase operation is performed by writing zeros.

     //

     if (BlockNum < EraseGroupSize) {

       Status = EmmcWriteZeros (Partition, FirstLba, Size);

diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
index 86957a42da..62e70ae912 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcBlockIo.h
@@ -43,7 +43,7 @@ EmmcReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -73,7 +73,7 @@ EmmcReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -176,7 +176,7 @@ EmmcReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
index e2ae56c505..e9095b904c 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.c
@@ -812,7 +812,7 @@ EmmcDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.

   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.

   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.

-  @retval Others                   The driver failded to start the device.

+  @retval Others                   The driver failed to start the device.

 

 **/

 EFI_STATUS

diff --git a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
index d286d97f42..5ecce41dee 100644
--- a/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
+++ b/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.h
@@ -235,7 +235,7 @@ EmmcDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.

   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.

   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.

-  @retval Others                   The driver failded to start the device.

+  @retval Others                   The driver failed to start the device.

 

 **/

 EFI_STATUS

diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
index 63a35cc253..fb043c19ff 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHcMem.c
@@ -128,7 +128,7 @@ SdPeimAllocMemFromBlock (
     //

     // If current bit is zero, the corresponding memory unit is

     // available, otherwise we need to restart our searching.

-    // Available counts the consective number of zero bit.

+    // Available counts the consecutive number of zero bit.

     //

     if (!SD_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit)) {

       Available++;

diff --git a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
index 5efc06af5f..756c3063bb 100644
--- a/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
+++ b/MdeModulePkg/Bus/Sd/SdBlockIoPei/SdHci.c
@@ -1290,7 +1290,7 @@ SdPeimExecTrb (
   BlkCount = 0;

   if (Trb->Mode != SdNoData) {

     //

-    // Calcuate Block Count.

+    // Calculate Block Count.

     //

     BlkCount = (UINT16)(Trb->DataLen / Trb->BlockSize);

   }

@@ -2494,7 +2494,7 @@ SdPeimSendTuningBlk (
 }

 

 /**

-  Tunning the sampling point of SDR104 or SDR50 bus speed mode.

+  Tuning the sampling point of SDR104 or SDR50 bus speed mode.

 

   Command SD_SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the

   tuning procedure.

@@ -2702,7 +2702,7 @@ SdPeimSetBusMode (
     return EFI_DEVICE_ERROR;

   }

   //

-  // Set to Hight Speed timing

+  // Set to High Speed timing

   //

   if (AccessMode == 1) {

     HostCtrl1 = BIT2;

diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
index 876efe31e5..9f42abe7e2 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.c
@@ -9,7 +9,7 @@
 #include "SdDxe.h"

 

 /**

-  Nonblocking I/O callback funtion when the event is signaled.

+  Nonblocking I/O callback function when the event is signaled.

 

   @param[in]  Event     The Event this notify function registered to.

   @param[in]  Context   Pointer to the context data registered to the

@@ -569,7 +569,7 @@ Error:
   @retval EFI_WRITE_PROTECTED   The device can not be read/written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read/write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The read/write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -721,7 +721,7 @@ SdReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -760,7 +760,7 @@ SdReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -918,7 +918,7 @@ SdReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
index 769b471064..b6b4c45f1f 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdBlockIo.h
@@ -43,7 +43,7 @@ SdReset (
   @retval EFI_SUCCESS           The data was read correctly from the device.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHANGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -73,7 +73,7 @@ SdReadBlocks (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

@@ -176,7 +176,7 @@ SdReadBlocksEx (
   @retval EFI_WRITE_PROTECTED   The device can not be written to.

   @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.

   @retval EFI_NO_MEDIA          There is no media in the device.

-  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.

+  @retval EFI_MEDIA_CHANGED     The MediaId does not match the current device.

   @retval EFI_BAD_BUFFER_SIZE   The Buffer was not a multiple of the block size of the device.

   @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,

                                 or the buffer is not on proper alignment.

diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
index e341b4cc1c..73bcc181c1 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.c
@@ -563,7 +563,7 @@ SdDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.

   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.

   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.

-  @retval Others                   The driver failded to start the device.

+  @retval Others                   The driver failed to start the device.

 

 **/

 EFI_STATUS

diff --git a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
index d23f5a07a5..ff740a5218 100644
--- a/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
+++ b/MdeModulePkg/Bus/Sd/SdDxe/SdDxe.h
@@ -210,7 +210,7 @@ SdDxeDriverBindingSupported (
   @retval EFI_SUCCESS              The device was started.

   @retval EFI_DEVICE_ERROR         The device could not be started due to a device error.Currently not implemented.

   @retval EFI_OUT_OF_RESOURCES     The request could not be completed due to a lack of resources.

-  @retval Others                   The driver failded to start the device.

+  @retval Others                   The driver failed to start the device.

 

 **/

 EFI_STATUS