diff options
| author | Reza Jelveh <reza.jelveh@tuhh.de> | 2015-09-22 11:18:18 +0000 |
|---|---|---|
| committer | lersek <lersek@Edk2> | 2015-09-22 11:18:18 +0000 |
| commit | 12e92a23ada7b20e424e782fe1e2d325c22e161c (patch) | |
| tree | b92bbbee5e5e00957e104ceaaad83d91d3f98e37 /OvmfPkg/SataControllerDxe | |
| parent | 83be6beea56f9f6e93c04f316e91be18e44654f0 (diff) | |
| download | edk2-12e92a23ada7b20e424e782fe1e2d325c22e161c.tar.gz edk2-12e92a23ada7b20e424e782fe1e2d325c22e161c.tar.bz2 edk2-12e92a23ada7b20e424e782fe1e2d325c22e161c.zip | |
OvmfPkg: copy SataControllerDxe from DuetPkg
Edk2 maintainers reached the consensus that SataControllerDxe was
inherently platform specific, for which reason it was not appropriate for
either PcAtChipsetPkg nor MdeModulePkg. Hence, if OvmfPkg wanted to use
it, it should either reference it directly from under DuetPkg, or copy it.
Given that DuetPkg is another "leaf" platform in edk2, and that in the
upcoming patches we'll actually modify the driver, the ultimate decision
(reached months ago on the list, after Reza's v2 posting) is that OvmfPkg
shall copy the driver.
This patch does that; the only difference being a fresh FILE_GUID in the
INF file.
Cc: Alexander Graf <agraf@suse.de>
Cc: Reza Jelveh <reza.jelveh@tuhh.de>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
[lersek@redhat.com: updated commit message, generated fresh FILE_GUID]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18526 6f19259b-4bc3-4df7-8a09-765794883524
Diffstat (limited to 'OvmfPkg/SataControllerDxe')
| -rw-r--r-- | OvmfPkg/SataControllerDxe/ComponentName.c | 176 | ||||
| -rw-r--r-- | OvmfPkg/SataControllerDxe/SataController.c | 1049 | ||||
| -rw-r--r-- | OvmfPkg/SataControllerDxe/SataController.h | 542 | ||||
| -rw-r--r-- | OvmfPkg/SataControllerDxe/SataControllerDxe.inf | 49 |
4 files changed, 1816 insertions, 0 deletions
diff --git a/OvmfPkg/SataControllerDxe/ComponentName.c b/OvmfPkg/SataControllerDxe/ComponentName.c new file mode 100644 index 0000000000..57cd3c88d3 --- /dev/null +++ b/OvmfPkg/SataControllerDxe/ComponentName.c @@ -0,0 +1,176 @@ +/** @file
+ UEFI Component Name(2) protocol implementation for Sata Controller driver.
+
+ Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SataController.h"
+
+//
+/// EFI Component Name Protocol
+///
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gSataControllerComponentName = {
+ SataControllerComponentNameGetDriverName,
+ SataControllerComponentNameGetControllerName,
+ "eng"
+};
+
+//
+/// EFI Component Name 2 Protocol
+///
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gSataControllerComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) SataControllerComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) SataControllerComponentNameGetControllerName,
+ "en"
+};
+
+//
+/// Driver Name Strings
+///
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSataControllerDriverNameTable[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Sata Controller Init Driver"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+///
+/// Controller Name Strings
+///
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mSataControllerControllerNameTable[] = {
+ {
+ "eng;en",
+ (CHAR16 *)L"Sata Controller"
+ },
+ {
+ NULL,
+ NULL
+ }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the UEFI Driver.
+
+ @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
+ @param Language A pointer to a three character ISO 639-2 language identifier.
+ This is the language of the driver name that that the caller
+ is requesting, and it must match one of the languages specified
+ in SupportedLanguages. The number of languages supported by a
+ driver is up to the driver writer.
+ @param DriverName A pointer to the Unicode string to return. This Unicode string
+ is the name of the driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by This
+ and the language specified by Language was returned
+ in DriverName.
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+ @retval EFI_UNSUPPORTED The driver specified by This does not support the
+ language specified by Language.
+**/
+EFI_STATUS
+EFIAPI
+SataControllerComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mSataControllerDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gSataControllerComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by an UEFI Driver.
+
+ @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
+ @param ControllerHandle The handle of a controller that the driver specified by
+ This is managing. This handle specifies the controller
+ whose name is to be returned.
+ @param ChildHandle OPTIONAL The handle of the child controller to retrieve the name
+ of. This is an optional parameter that may be NULL. It
+ will be NULL for device drivers. It will also be NULL
+ for a bus drivers that wish to retrieve the name of the
+ bus controller. It will not be NULL for a bus driver
+ that wishes to retrieve the name of a child controller.
+ @param Language A pointer to a three character ISO 639-2 language
+ identifier. This is the language of the controller name
+ that that the caller is requesting, and it must match one
+ of the languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up to the
+ driver writer.
+ @param ControllerName A pointer to the Unicode string to return. This Unicode
+ string is the name of the controller specified by
+ ControllerHandle and ChildHandle in the language
+ specified by Language from the point of view of the
+ driver specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in the
+ language specified by Language for the driver
+ specified by This was returned in DriverName.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+ @retval EFI_UNSUPPORTED The driver specified by This does not support the
+ language specified by Language.
+**/
+EFI_STATUS
+EFIAPI
+SataControllerComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Make sure this driver is currently managing ControllHandle
+ //
+ Status = EfiTestManagedDevice (
+ ControllerHandle,
+ gSataControllerDriverBinding.DriverBindingHandle,
+ &gEfiPciIoProtocolGuid
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (ChildHandle != NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mSataControllerControllerNameTable,
+ ControllerName,
+ (BOOLEAN)(This == &gSataControllerComponentName)
+ );
+}
diff --git a/OvmfPkg/SataControllerDxe/SataController.c b/OvmfPkg/SataControllerDxe/SataController.c new file mode 100644 index 0000000000..e5d10e234e --- /dev/null +++ b/OvmfPkg/SataControllerDxe/SataController.c @@ -0,0 +1,1049 @@ +/** @file
+ This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.
+
+ Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "SataController.h"
+
+///
+/// EFI_DRIVER_BINDING_PROTOCOL instance
+///
+EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding = {
+ SataControllerSupported,
+ SataControllerStart,
+ SataControllerStop,
+ 0xa,
+ NULL,
+ NULL
+};
+
+/**
+ Read AHCI Operation register.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The operation register offset.
+
+ @return The register content read.
+
+**/
+UINT32
+EFIAPI
+AhciReadReg (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT32 Offset
+ )
+{
+ UINT32 Data;
+
+ ASSERT (PciIo != NULL);
+
+ Data = 0;
+
+ PciIo->Mem.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ AHCI_BAR_INDEX,
+ (UINT64) Offset,
+ 1,
+ &Data
+ );
+
+ return Data;
+}
+
+/**
+ Write AHCI Operation register.
+
+ @param PciIo The PCI IO protocol instance.
+ @param Offset The operation register offset.
+ @param Data The data used to write down.
+
+**/
+VOID
+EFIAPI
+AhciWriteReg (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ )
+{
+ ASSERT (PciIo != NULL);
+
+ PciIo->Mem.Write (
+ PciIo,
+ EfiPciIoWidthUint32,
+ AHCI_BAR_INDEX,
+ (UINT64) Offset,
+ 1,
+ &Data
+ );
+
+ return;
+}
+
+/**
+ This function is used to calculate the best PIO mode supported by specific IDE device
+
+ @param IdentifyData The identify data of specific IDE device.
+ @param DisPioMode Disqualified PIO modes collection.
+ @param SelectedMode Available PIO modes collection.
+
+ @retval EFI_SUCCESS Best PIO modes are returned.
+ @retval EFI_UNSUPPORTED The device doesn't support PIO mode,
+ or all supported modes have been disqualified.
+**/
+EFI_STATUS
+CalculateBestPioMode (
+ IN EFI_IDENTIFY_DATA *IdentifyData,
+ IN UINT16 *DisPioMode OPTIONAL,
+ OUT UINT16 *SelectedMode
+ )
+{
+ UINT16 PioMode;
+ UINT16 AdvancedPioMode;
+ UINT16 Temp;
+ UINT16 Index;
+ UINT16 MinimumPioCycleTime;
+
+ Temp = 0xff;
+
+ PioMode = (UINT8) (((ATA5_IDENTIFY_DATA *) (&(IdentifyData->AtaData)))->pio_cycle_timing >> 8);
+
+ //
+ // See whether Identify Data word 64 - 70 are valid
+ //
+ if ((IdentifyData->AtaData.field_validity & 0x02) == 0x02) {
+
+ AdvancedPioMode = IdentifyData->AtaData.advanced_pio_modes;
+ DEBUG ((EFI_D_INFO, "CalculateBestPioMode: AdvancedPioMode = %x\n", AdvancedPioMode));
+
+ for (Index = 0; Index < 8; Index++) {
+ if ((AdvancedPioMode & 0x01) != 0) {
+ Temp = Index;
+ }
+
+ AdvancedPioMode >>= 1;
+ }
+
+ //
+ // If Temp is modified, mean the advanced_pio_modes is not zero;
+ // if Temp is not modified, mean there is no advanced PIO mode supported,
+ // the best PIO Mode is the value in pio_cycle_timing.
+ //
+ if (Temp != 0xff) {
+ AdvancedPioMode = (UINT16) (Temp + 3);
+ } else {
+ AdvancedPioMode = PioMode;
+ }
+
+ //
+ // Limit the PIO mode to at most PIO4.
+ //
+ PioMode = (UINT16) MIN (AdvancedPioMode, 4);
+
+ MinimumPioCycleTime = IdentifyData->AtaData.min_pio_cycle_time_with_flow_control;
+
+ if (MinimumPioCycleTime <= 120) {
+ PioMode = (UINT16) MIN (4, PioMode);
+ } else if (MinimumPioCycleTime <= 180) {
+ PioMode = (UINT16) MIN (3, PioMode);
+ } else if (MinimumPioCycleTime <= 240) {
+ PioMode = (UINT16) MIN (2, PioMode);
+ } else {
+ PioMode = 0;
+ }
+
+ //
+ // Degrade the PIO mode if the mode has been disqualified
+ //
+ if (DisPioMode != NULL) {
+ if (*DisPioMode < 2) {
+ return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2
+ }
+
+ if (PioMode >= *DisPioMode) {
+ PioMode = (UINT16) (*DisPioMode - 1);
+ }
+ }
+
+ if (PioMode < 2) {
+ *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;
+ } else {
+ *SelectedMode = PioMode; // ATA_PIO_MODE_2 to ATA_PIO_MODE_4;
+ }
+
+ } else {
+ //
+ // Identify Data word 64 - 70 are not valid
+ // Degrade the PIO mode if the mode has been disqualified
+ //
+ if (DisPioMode != NULL) {
+ if (*DisPioMode < 2) {
+ return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2
+ }
+
+ if (PioMode == *DisPioMode) {
+ PioMode--;
+ }
+ }
+
+ if (PioMode < 2) {
+ *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;
+ } else {
+ *SelectedMode = 2; // ATA_PIO_MODE_2;
+ }
+
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is used to calculate the best UDMA mode supported by specific IDE device
+
+ @param IdentifyData The identify data of specific IDE device.
+ @param DisUDmaMode Disqualified UDMA modes collection.
+ @param SelectedMode Available UDMA modes collection.
+
+ @retval EFI_SUCCESS Best UDMA modes are returned.
+ @retval EFI_UNSUPPORTED The device doesn't support UDMA mode,
+ or all supported modes have been disqualified.
+**/
+EFI_STATUS
+CalculateBestUdmaMode (
+ IN EFI_IDENTIFY_DATA *IdentifyData,
+ IN UINT16 *DisUDmaMode OPTIONAL,
+ OUT UINT16 *SelectedMode
+ )
+{
+ UINT16 TempMode;
+ UINT16 DeviceUDmaMode;
+
+ DeviceUDmaMode = 0;
+
+ //
+ // Check whether the WORD 88 (supported UltraDMA by drive) is valid
+ //
+ if ((IdentifyData->AtaData.field_validity & 0x04) == 0x00) {
+ return EFI_UNSUPPORTED;
+ }
+
+ DeviceUDmaMode = IdentifyData->AtaData.ultra_dma_mode;
+ DEBUG ((EFI_D_INFO, "CalculateBestUdmaMode: DeviceUDmaMode = %x\n", DeviceUDmaMode));
+ DeviceUDmaMode &= 0x3f;
+ TempMode = 0; // initialize it to UDMA-0
+
+ while ((DeviceUDmaMode >>= 1) != 0) {
+ TempMode++;
+ }
+
+ //
+ // Degrade the UDMA mode if the mode has been disqualified
+ //
+ if (DisUDmaMode != NULL) {
+ if (*DisUDmaMode == 0) {
+ *SelectedMode = 0;
+ return EFI_UNSUPPORTED; // no mode below ATA_UDMA_MODE_0
+ }
+
+ if (TempMode >= *DisUDmaMode) {
+ TempMode = (UINT16) (*DisUDmaMode - 1);
+ }
+ }
+
+ //
+ // Possible returned mode is between ATA_UDMA_MODE_0 and ATA_UDMA_MODE_5
+ //
+ *SelectedMode = TempMode;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ The Entry Point of module. It follows the standard UEFI driver model.
+
+ @param[in] ImageHandle The firmware allocated handle for the EFI image.
+ @param[in] SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval other Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeSataControllerDriver (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Install driver model protocol(s).
+ //
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gSataControllerDriverBinding,
+ ImageHandle,
+ &gSataControllerComponentName,
+ &gSataControllerComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
+/**
+ Supported function of Driver Binding protocol for this driver.
+ Test to see if this driver supports ControllerHandle.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to test.
+ @param RemainingDevicePath A pointer to the device path.
+ it should be ignored by device driver.
+
+ @retval EFI_SUCCESS This driver supports this device.
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+SataControllerSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 PciData;
+
+ //
+ // Attempt to open PCI I/O Protocol
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Now further check the PCI header: Base Class (offset 0x0B) and
+ // Sub Class (offset 0x0A). This controller should be an SATA controller
+ //
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (PciData.Hdr.ClassCode),
+ PciData.Hdr.ClassCode
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ This routine is called right after the .Supported() called and
+ Start this driver on ControllerHandle.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to bind driver to.
+ @param RemainingDevicePath A pointer to the device path.
+ it should be ignored by device driver.
+
+ @retval EFI_SUCCESS This driver is added to this device.
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.
+ @retval other Some error occurs when binding this driver to this device.
+
+**/
+EFI_STATUS
+EFIAPI
+SataControllerStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 PciData;
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
+ UINT32 Data32;
+ UINTN ChannelDeviceCount;
+
+ DEBUG ((EFI_D_INFO, "SataControllerStart START\n"));
+
+ SataPrivateData = NULL;
+
+ //
+ // Now test and open PCI I/O Protocol
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "SataControllerStart error return status = %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Allocate Sata Private Data structure
+ //
+ SataPrivateData = AllocateZeroPool (sizeof (EFI_SATA_CONTROLLER_PRIVATE_DATA));
+ if (SataPrivateData == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // Initialize Sata Private Data
+ //
+ SataPrivateData->Signature = SATA_CONTROLLER_SIGNATURE;
+ SataPrivateData->PciIo = PciIo;
+ SataPrivateData->IdeInit.GetChannelInfo = IdeInitGetChannelInfo;
+ SataPrivateData->IdeInit.NotifyPhase = IdeInitNotifyPhase;
+ SataPrivateData->IdeInit.SubmitData = IdeInitSubmitData;
+ SataPrivateData->IdeInit.DisqualifyMode = IdeInitDisqualifyMode;
+ SataPrivateData->IdeInit.CalculateMode = IdeInitCalculateMode;
+ SataPrivateData->IdeInit.SetTiming = IdeInitSetTiming;
+ SataPrivateData->IdeInit.EnumAll = SATA_ENUMER_ALL;
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ PCI_CLASSCODE_OFFSET,
+ sizeof (PciData.Hdr.ClassCode),
+ PciData.Hdr.ClassCode
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ if (IS_PCI_IDE (&PciData)) {
+ SataPrivateData->IdeInit.ChannelCount = IDE_MAX_CHANNEL;
+ SataPrivateData->DeviceCount = IDE_MAX_DEVICES;
+ } else if (IS_PCI_SATADPA (&PciData)) {
+ //
+ // Read Host Capability Register(CAP) to get Number of Ports(NPS) and Supports Port Multiplier(SPM)
+ // NPS is 0's based value indicating the maximum number of ports supported by the HBA silicon.
+ // A maximum of 32 ports can be supported. A value of '0h', indicating one port, is the minimum requirement.
+ //
+ Data32 = AhciReadReg (PciIo, R_AHCI_CAP);
+ SataPrivateData->IdeInit.ChannelCount = (UINT8) ((Data32 & B_AHCI_CAP_NPS) + 1);
+ SataPrivateData->DeviceCount = AHCI_MAX_DEVICES;
+ if ((Data32 & B_AHCI_CAP_SPM) == B_AHCI_CAP_SPM) {
+ SataPrivateData->DeviceCount = AHCI_MULTI_MAX_DEVICES;
+ }
+ }
+
+ ChannelDeviceCount = (UINTN) (SataPrivateData->IdeInit.ChannelCount) * (UINTN) (SataPrivateData->DeviceCount);
+ SataPrivateData->DisqualifiedModes = AllocateZeroPool ((sizeof (EFI_ATA_COLLECTIVE_MODE)) * ChannelDeviceCount);
+ if (SataPrivateData->DisqualifiedModes == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ SataPrivateData->IdentifyData = AllocateZeroPool ((sizeof (EFI_IDENTIFY_DATA)) * ChannelDeviceCount);
+ if (SataPrivateData->IdentifyData == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ SataPrivateData->IdentifyValid = AllocateZeroPool ((sizeof (BOOLEAN)) * ChannelDeviceCount);
+ if (SataPrivateData->IdentifyValid == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // Install IDE Controller Init Protocol to this instance
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ &(SataPrivateData->IdeInit),
+ NULL
+ );
+
+Done:
+ if (EFI_ERROR (Status)) {
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ if (SataPrivateData != NULL) {
+ if (SataPrivateData->DisqualifiedModes != NULL) {
+ FreePool (SataPrivateData->DisqualifiedModes);
+ }
+ if (SataPrivateData->IdentifyData != NULL) {
+ FreePool (SataPrivateData->IdentifyData);
+ }
+ if (SataPrivateData->IdentifyValid != NULL) {
+ FreePool (SataPrivateData->IdentifyValid);
+ }
+ FreePool (SataPrivateData);
+ }
+ }
+
+ DEBUG ((EFI_D_INFO, "SataControllerStart END status = %r\n", Status));
+
+ return Status;
+}
+
+/**
+ Stop this driver on ControllerHandle.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on.
+ @param NumberOfChildren Not used.
+ @param ChildHandleBuffer Not used.
+
+ @retval EFI_SUCCESS This driver is removed from this device.
+ @retval other Some error occurs when removing this driver from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+SataControllerStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
+
+ //
+ // Open the produced protocol
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ (VOID **) &IdeInit,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_UNSUPPORTED;
+ }
+
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (IdeInit);
+ ASSERT (SataPrivateData != NULL);
+
+ //
+ // Uninstall the IDE Controller Init Protocol from this instance
+ //
+ Status = gBS->UninstallMultipleProtocolInterfaces (
+ Controller,
+ &gEfiIdeControllerInitProtocolGuid,
+ &(SataPrivateData->IdeInit),
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (SataPrivateData != NULL) {
+ if (SataPrivateData->DisqualifiedModes != NULL) {
+ FreePool (SataPrivateData->DisqualifiedModes);
+ }
+ if (SataPrivateData->IdentifyData != NULL) {
+ FreePool (SataPrivateData->IdentifyData);
+ }
+ if (SataPrivateData->IdentifyValid != NULL) {
+ FreePool (SataPrivateData->IdentifyValid);
+ }
+ FreePool (SataPrivateData);
+ }
+
+ //
+ // Close protocols opened by Sata Controller driver
+ //
+ return gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+}
+
+/**
+ Calculate the flat array subscript of a (Channel, Device) pair.
+
+ @param[in] SataPrivateData The private data structure corresponding to the
+ SATA controller that attaches the device for
+ which the flat array subscript is being
+ calculated.
+
+ @param[in] Channel The channel (ie. port) number on the SATA
+ controller that the device is attached to.
+
+ @param[in] Device The device number on the channel.
+
+ @return The flat array subscript suitable for indexing DisqualifiedModes,
+ IdentifyData, and IdentifyValid.
+**/
+STATIC
+UINTN
+FlatDeviceIndex (
+ IN CONST EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData,
+ IN UINTN Channel,
+ IN UINTN Device
+ )
+{
+ ASSERT (SataPrivateData != NULL);
+ ASSERT (Channel < SataPrivateData->IdeInit.ChannelCount);
+ ASSERT (Device < SataPrivateData->DeviceCount);
+
+ return Channel * SataPrivateData->DeviceCount + Device;
+}
+
+//
+// Interface functions of IDE_CONTROLLER_INIT protocol
+//
+/**
+ Returns the information about the specified IDE channel.
+
+ This function can be used to obtain information about a particular IDE channel.
+ The driver entity uses this information during the enumeration process.
+
+ If Enabled is set to FALSE, the driver entity will not scan the channel. Note
+ that it will not prevent an operating system driver from scanning the channel.
+
+ For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
+ controllers, this value will always be 1. SATA configurations can contain SATA
+ port multipliers. SATA port multipliers behave like SATA bridges and can support
+ up to 16 devices on the other side. If a SATA port out of the IDE controller
+ is connected to a port multiplier, MaxDevices will be set to the number of SATA
+ devices that the port multiplier supports. Because today's port multipliers
+ support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
+ bus driver is required to scan for the presence of port multipliers behind an SATA
+ controller and enumerate up to MaxDevices number of devices behind the port
+ multiplier.
+
+ In this context, the devices behind a port multiplier constitute a channel.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel Zero-based channel number.
+ @param[out] Enabled TRUE if this channel is enabled. Disabled channels
+ are not scanned to see if any devices are present.
+ @param[out] MaxDevices The maximum number of IDE devices that the bus driver
+ can expect on this channel. For the ATA/ATAPI
+ specification, version 6, this number will either be
+ one or two. For Serial ATA (SATA) configurations with a
+ port multiplier, this number can be as large as fifteen.
+
+ @retval EFI_SUCCESS Information was returned without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitGetChannelInfo (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ OUT BOOLEAN *Enabled,
+ OUT UINT8 *MaxDevices
+ )
+{
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
+ ASSERT (SataPrivateData != NULL);
+
+ if (Channel < This->ChannelCount) {
+ *Enabled = TRUE;
+ *MaxDevices = SataPrivateData->DeviceCount;
+ return EFI_SUCCESS;
+ }
+
+ *Enabled = FALSE;
+ return EFI_INVALID_PARAMETER;
+}
+
+/**
+ The notifications from the driver entity that it is about to enter a certain
+ phase of the IDE channel enumeration process.
+
+ This function can be used to notify the IDE controller driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Seven notification points are defined
+ at this time.
+
+ More synchronization points may be added as required in the future.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Phase The phase during enumeration.
+ @param[in] Channel Zero-based channel number.
+
+ @retval EFI_SUCCESS The notification was accepted without any errors.
+ @retval EFI_UNSUPPORTED Phase is not supported.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_NOT_READY This phase cannot be entered at this time; for
+ example, an attempt was made to enter a Phase
+ without having entered one or more previous
+ Phase.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitNotifyPhase (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,
+ IN UINT8 Channel
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Submits the device information to the IDE controller driver.
+
+ This function is used by the driver entity to pass detailed information about
+ a particular device to the IDE controller driver. The driver entity obtains
+ this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
+ is the pointer to the response data buffer. The IdentifyData buffer is owned
+ by the driver entity, and the IDE controller driver must make a local copy
+ of the entire buffer or parts of the buffer as needed. The original IdentifyData
+ buffer pointer may not be valid when
+
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
+
+ The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
+ compute the optimum mode for the device. These fields are not limited to the
+ timing information. For example, an implementation of the IDE controller driver
+ may examine the vendor and type/mode field to match known bad drives.
+
+ The driver entity may submit drive information in any order, as long as it
+ submits information for all the devices belonging to the enumeration group
+ before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
+ in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ should be called with IdentifyData set to NULL. The IDE controller driver may
+ not have any other mechanism to know whether a device is present or not. Therefore,
+ setting IdentifyData to NULL does not constitute an error condition.
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
+ given (Channel, Device) pair.
+
+ @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel Zero-based channel number.
+ @param[in] Device Zero-based device number on the Channel.
+ @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.
+
+ @retval EFI_SUCCESS The information was accepted without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitSubmitData (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_IDENTIFY_DATA *IdentifyData
+ )
+{
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
+ UINTN DeviceIndex;
+
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
+ ASSERT (SataPrivateData != NULL);
+
+ if ((Channel >= This->ChannelCount) || (Device >= SataPrivateData->DeviceCount)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);
+
+ //
+ // Make a local copy of device's IdentifyData and mark the valid flag
+ //
+ if (IdentifyData != NULL) {
+ CopyMem (
+ &(SataPrivateData->IdentifyData[DeviceIndex]),
+ IdentifyData,
+ sizeof (EFI_IDENTIFY_DATA)
+ );
+
+ SataPrivateData->IdentifyValid[DeviceIndex] = TRUE;
+ } else {
+ SataPrivateData->IdentifyValid[DeviceIndex] = FALSE;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Disqualifies specific modes for an IDE device.
+
+ This function allows the driver entity or other drivers (such as platform
+ drivers) to reject certain timing modes and request the IDE controller driver
+ to recalculate modes. This function allows the driver entity and the IDE
+ controller driver to negotiate the timings on a per-device basis. This function
+ is useful in the case of drives that lie about their capabilities. An example
+ is when the IDE device fails to accept the timing modes that are calculated
+ by the IDE controller driver based on the response to the Identify Drive command.
+
+ If the driver entity does not want to limit the ATA timing modes and leave that
+ decision to the IDE controller driver, it can either not call this function for
+ the given device or call this function and set the Valid flag to FALSE for all
+ modes that are listed in EFI_ATA_COLLECTIVE_MODE.
+
+ The driver entity may disqualify modes for a device in any order and any number
+ of times.
+
+ This function can be called multiple times to invalidate multiple modes of the
+ same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
+ specification for more information on PIO modes.
+
+ For Serial ATA (SATA) controllers, this member function can be used to disqualify
+ a higher transfer rate mode on a given channel. For example, a platform driver
+ may inform the IDE controller driver to not use second-generation (Gen2) speeds
+ for a certain SATA drive.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel The zero-based channel number.
+ @param[in] Device The zero-based device number on the Channel.
+ @param[in] BadModes The modes that the device does not support and that
+ should be disqualified.
+
+ @retval EFI_SUCCESS The modes were accepted without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_INVALID_PARAMETER IdentifyData is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitDisqualifyMode (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_ATA_COLLECTIVE_MODE *BadModes
+ )
+{
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
+ UINTN DeviceIndex;
+
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
+ ASSERT (SataPrivateData != NULL);
+
+ if ((Channel >= This->ChannelCount) || (BadModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);
+
+ //
+ // Record the disqualified modes per channel per device. From ATA/ATAPI spec,
+ // if a mode is not supported, the modes higher than it is also not supported.
+ //
+ CopyMem (
+ &(SataPrivateData->DisqualifiedModes[DeviceIndex]),
+ BadModes,
+ sizeof (EFI_ATA_COLLECTIVE_MODE)
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Returns the information about the optimum modes for the specified IDE device.
+
+ This function is used by the driver entity to obtain the optimum ATA modes for
+ a specific device. The IDE controller driver takes into account the following
+ while calculating the mode:
+ - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
+
+ The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ for all the devices that belong to an enumeration group before calling
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
+
+ The IDE controller driver will use controller- and possibly platform-specific
+ algorithms to arrive at SupportedModes. The IDE controller may base its
+ decision on user preferences and other considerations as well. This function
+ may be called multiple times because the driver entity may renegotiate the mode
+ with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
+
+ The driver entity may collect timing information for various devices in any
+ order. The driver entity is responsible for making sure that all the dependencies
+ are satisfied. For example, the SupportedModes information for device A that
+ was previously returned may become stale after a call to
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
+
+ The buffer SupportedModes is allocated by the callee because the caller does
+ not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
+ is defined in a way that allows for future extensibility and can be of variable
+ length. This memory pool should be deallocated by the caller when it is no
+ longer necessary.
+
+ The IDE controller driver for a Serial ATA (SATA) controller can use this
+ member function to force a lower speed (first-generation [Gen1] speeds on a
+ second-generation [Gen2]-capable hardware). The IDE controller driver can
+ also allow the driver entity to stay with the speed that has been negotiated
+ by the physical layer.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel A zero-based channel number.
+ @param[in] Device A zero-based device number on the Channel.
+ @param[out] SupportedModes The optimum modes for the device.
+
+ @retval EFI_SUCCESS SupportedModes was returned.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_INVALID_PARAMETER SupportedModes is NULL.
+ @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
+ data. This error may happen if
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
+ were not called for at least one drive in the
+ same enumeration group.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitCalculateMode (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes
+ )
+{
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;
+ EFI_IDENTIFY_DATA *IdentifyData;
+ BOOLEAN IdentifyValid;
+ EFI_ATA_COLLECTIVE_MODE *DisqualifiedModes;
+ UINT16 SelectedMode;
+ EFI_STATUS Status;
+ UINTN DeviceIndex;
+
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);
+ ASSERT (SataPrivateData != NULL);
+
+ if ((Channel >= This->ChannelCount) || (SupportedModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *SupportedModes = AllocateZeroPool (sizeof (EFI_ATA_COLLECTIVE_MODE));
+ if (*SupportedModes == NULL) {
+ ASSERT (*SupportedModes != NULL);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);
+
+ IdentifyData = &(SataPrivateData->IdentifyData[DeviceIndex]);
+ IdentifyValid = SataPrivateData->IdentifyValid[DeviceIndex];
+ DisqualifiedModes = &(SataPrivateData->DisqualifiedModes[DeviceIndex]);
+
+ //
+ // Make sure we've got the valid identify data of the device from SubmitData()
+ //
+ if (!IdentifyValid) {
+ FreePool (*SupportedModes);
+ return EFI_NOT_READY;
+ }
+
+ Status = CalculateBestPioMode (
+ IdentifyData,
+ (DisqualifiedModes->PioMode.Valid ? ((UINT16 *) &(DisqualifiedModes->PioMode.Mode)) : NULL),
+ &SelectedMode
+ );
+ if (!EFI_ERROR (Status)) {
+ (*SupportedModes)->PioMode.Valid = TRUE;
+ (*SupportedModes)->PioMode.Mode = SelectedMode;
+
+ } else {
+ (*SupportedModes)->PioMode.Valid = FALSE;
+ }
+ DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: PioMode = %x\n", (*SupportedModes)->PioMode.Mode));
+
+ Status = CalculateBestUdmaMode (
+ IdentifyData,
+ (DisqualifiedModes->UdmaMode.Valid ? ((UINT16 *) &(DisqualifiedModes->UdmaMode.Mode)) : NULL),
+ &SelectedMode
+ );
+
+ if (!EFI_ERROR (Status)) {
+ (*SupportedModes)->UdmaMode.Valid = TRUE;
+ (*SupportedModes)->UdmaMode.Mode = SelectedMode;
+
+ } else {
+ (*SupportedModes)->UdmaMode.Valid = FALSE;
+ }
+ DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: UdmaMode = %x\n", (*SupportedModes)->UdmaMode.Mode));
+
+ //
+ // The modes other than PIO and UDMA are not supported
+ //
+ return EFI_SUCCESS;
+}
+
+/**
+ Commands the IDE controller driver to program the IDE controller hardware
+ so that the specified device can operate at the specified mode.
+
+ This function is used by the driver entity to instruct the IDE controller
+ driver to program the IDE controller hardware to the specified modes. This
+ function can be called only once for a particular device. For a Serial ATA
+ (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
+ specific programming may be required.
+
+ @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel Zero-based channel number.
+ @param[in] Device Zero-based device number on the Channel.
+ @param[in] Modes The modes to set.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.
+ @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.
+ The driver entity should not use this device.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitSetTiming (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_ATA_COLLECTIVE_MODE *Modes
+ )
+{
+ return EFI_SUCCESS;
+}
diff --git a/OvmfPkg/SataControllerDxe/SataController.h b/OvmfPkg/SataControllerDxe/SataController.h new file mode 100644 index 0000000000..a6c6c168df --- /dev/null +++ b/OvmfPkg/SataControllerDxe/SataController.h @@ -0,0 +1,542 @@ +/** @file
+ Header file for Sata Controller driver.
+
+ Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _SATA_CONTROLLER_H_
+#define _SATA_CONTROLLER_H_
+
+#include <Uefi.h>
+#include <Protocol/ComponentName.h>
+#include <Protocol/DriverBinding.h>
+#include <Protocol/PciIo.h>
+#include <Protocol/IdeControllerInit.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <IndustryStandard/Pci.h>
+
+//
+// Global Variables definitions
+//
+extern EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding;
+extern EFI_COMPONENT_NAME_PROTOCOL gSataControllerComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gSataControllerComponentName2;
+
+#define AHCI_BAR_INDEX 0x05
+#define R_AHCI_CAP 0x0
+#define B_AHCI_CAP_NPS (BIT4 | BIT3 | BIT2 | BIT1 | BIT0) // Number of Ports
+#define B_AHCI_CAP_SPM BIT17 // Supports Port Multiplier
+
+///
+/// AHCI each channel can have up to 1 device
+///
+#define AHCI_MAX_DEVICES 0x01
+
+///
+/// AHCI each channel can have 15 devices in the presence of a multiplier
+///
+#define AHCI_MULTI_MAX_DEVICES 0x0F
+
+///
+/// IDE supports 2 channel max
+///
+#define IDE_MAX_CHANNEL 0x02
+
+///
+/// IDE supports 2 devices max
+///
+#define IDE_MAX_DEVICES 0x02
+
+#define SATA_ENUMER_ALL FALSE
+
+//
+// Sata Controller driver private data structure
+//
+
+#define SATA_CONTROLLER_SIGNATURE SIGNATURE_32('S','A','T','A')
+
+typedef struct _EFI_SATA_CONTROLLER_PRIVATE_DATA {
+ //
+ // Standard signature used to identify Sata Controller private data
+ //
+ UINT32 Signature;
+
+ //
+ // Protocol instance of IDE_CONTROLLER_INIT produced by this driver
+ //
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL IdeInit;
+
+ //
+ // Copy of protocol pointers used by this driver
+ //
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ //
+ // The number of devices that are supported by this channel
+ //
+ UINT8 DeviceCount;
+
+ //
+ // The highest disqulified mode for each attached device,
+ // From ATA/ATAPI spec, if a mode is not supported,
+ // the modes higher than it is also not supported
+ //
+ EFI_ATA_COLLECTIVE_MODE *DisqualifiedModes;
+
+ //
+ // A copy of EFI_IDENTIFY_DATA data for each attached SATA device and its flag
+ //
+ EFI_IDENTIFY_DATA *IdentifyData;
+ BOOLEAN *IdentifyValid;
+} EFI_SATA_CONTROLLER_PRIVATE_DATA;
+
+#define SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS(a) CR(a, EFI_SATA_CONTROLLER_PRIVATE_DATA, IdeInit, SATA_CONTROLLER_SIGNATURE)
+
+//
+// Driver binding functions declaration
+//
+/**
+ Supported function of Driver Binding protocol for this driver.
+ Test to see if this driver supports ControllerHandle.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to test.
+ @param RemainingDevicePath A pointer to the device path. Should be ignored by
+ device driver.
+
+ @retval EFI_SUCCESS This driver supports this device.
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+SataControllerSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+;
+
+/**
+ This routine is called right after the .Supported() called and
+ Start this driver on ControllerHandle.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to bind driver to.
+ @param RemainingDevicePath A pointer to the device path. Should be ignored by
+ device driver.
+
+ @retval EFI_SUCCESS This driver is added to this device.
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.
+ @retval other Some error occurs when binding this driver to this device.
+
+**/
+EFI_STATUS
+EFIAPI
+SataControllerStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+;
+
+/**
+ Stop this driver on ControllerHandle.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on.
+ @param NumberOfChildren Not used.
+ @param ChildHandleBuffer Not used.
+
+ @retval EFI_SUCCESS This driver is removed from this device.
+ @retval other Some error occurs when removing this driver from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+SataControllerStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+;
+
+//
+// IDE controller init functions declaration
+//
+/**
+ Returns the information about the specified IDE channel.
+
+ This function can be used to obtain information about a particular IDE channel.
+ The driver entity uses this information during the enumeration process.
+
+ If Enabled is set to FALSE, the driver entity will not scan the channel. Note
+ that it will not prevent an operating system driver from scanning the channel.
+
+ For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
+ controllers, this value will always be 1. SATA configurations can contain SATA
+ port multipliers. SATA port multipliers behave like SATA bridges and can support
+ up to 16 devices on the other side. If a SATA port out of the IDE controller
+ is connected to a port multiplier, MaxDevices will be set to the number of SATA
+ devices that the port multiplier supports. Because today's port multipliers
+ support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
+ bus driver is required to scan for the presence of port multipliers behind an SATA
+ controller and enumerate up to MaxDevices number of devices behind the port
+ multiplier.
+
+ In this context, the devices behind a port multiplier constitute a channel.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel Zero-based channel number.
+ @param[out] Enabled TRUE if this channel is enabled. Disabled channels
+ are not scanned to see if any devices are present.
+ @param[out] MaxDevices The maximum number of IDE devices that the bus driver
+ can expect on this channel. For the ATA/ATAPI
+ specification, version 6, this number will either be
+ one or two. For Serial ATA (SATA) configurations with a
+ port multiplier, this number can be as large as fifteen.
+
+ @retval EFI_SUCCESS Information was returned without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitGetChannelInfo (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ OUT BOOLEAN *Enabled,
+ OUT UINT8 *MaxDevices
+ )
+;
+
+/**
+ The notifications from the driver entity that it is about to enter a certain
+ phase of the IDE channel enumeration process.
+
+ This function can be used to notify the IDE controller driver to perform
+ specific actions, including any chipset-specific initialization, so that the
+ chipset is ready to enter the next phase. Seven notification points are defined
+ at this time.
+
+ More synchronization points may be added as required in the future.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Phase The phase during enumeration.
+ @param[in] Channel Zero-based channel number.
+
+ @retval EFI_SUCCESS The notification was accepted without any errors.
+ @retval EFI_UNSUPPORTED Phase is not supported.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_NOT_READY This phase cannot be entered at this time; for
+ example, an attempt was made to enter a Phase
+ without having entered one or more previous
+ Phase.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitNotifyPhase (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,
+ IN UINT8 Channel
+ )
+;
+
+/**
+ Submits the device information to the IDE controller driver.
+
+ This function is used by the driver entity to pass detailed information about
+ a particular device to the IDE controller driver. The driver entity obtains
+ this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
+ is the pointer to the response data buffer. The IdentifyData buffer is owned
+ by the driver entity, and the IDE controller driver must make a local copy
+ of the entire buffer or parts of the buffer as needed. The original IdentifyData
+ buffer pointer may not be valid when
+
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
+
+ The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
+ compute the optimum mode for the device. These fields are not limited to the
+ timing information. For example, an implementation of the IDE controller driver
+ may examine the vendor and type/mode field to match known bad drives.
+
+ The driver entity may submit drive information in any order, as long as it
+ submits information for all the devices belonging to the enumeration group
+ before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
+ in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ should be called with IdentifyData set to NULL. The IDE controller driver may
+ not have any other mechanism to know whether a device is present or not. Therefore,
+ setting IdentifyData to NULL does not constitute an error condition.
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
+ given (Channel, Device) pair.
+
+ @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel Zero-based channel number.
+ @param[in] Device Zero-based device number on the Channel.
+ @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.
+
+ @retval EFI_SUCCESS The information was accepted without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitSubmitData (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_IDENTIFY_DATA *IdentifyData
+ )
+;
+
+/**
+ Disqualifies specific modes for an IDE device.
+
+ This function allows the driver entity or other drivers (such as platform
+ drivers) to reject certain timing modes and request the IDE controller driver
+ to recalculate modes. This function allows the driver entity and the IDE
+ controller driver to negotiate the timings on a per-device basis. This function
+ is useful in the case of drives that lie about their capabilities. An example
+ is when the IDE device fails to accept the timing modes that are calculated
+ by the IDE controller driver based on the response to the Identify Drive command.
+
+ If the driver entity does not want to limit the ATA timing modes and leave that
+ decision to the IDE controller driver, it can either not call this function for
+ the given device or call this function and set the Valid flag to FALSE for all
+ modes that are listed in EFI_ATA_COLLECTIVE_MODE.
+
+ The driver entity may disqualify modes for a device in any order and any number
+ of times.
+
+ This function can be called multiple times to invalidate multiple modes of the
+ same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
+ specification for more information on PIO modes.
+
+ For Serial ATA (SATA) controllers, this member function can be used to disqualify
+ a higher transfer rate mode on a given channel. For example, a platform driver
+ may inform the IDE controller driver to not use second-generation (Gen2) speeds
+ for a certain SATA drive.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel The zero-based channel number.
+ @param[in] Device The zero-based device number on the Channel.
+ @param[in] BadModes The modes that the device does not support and that
+ should be disqualified.
+
+ @retval EFI_SUCCESS The modes were accepted without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_INVALID_PARAMETER IdentifyData is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitDisqualifyMode (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_ATA_COLLECTIVE_MODE *BadModes
+ )
+;
+
+/**
+ Returns the information about the optimum modes for the specified IDE device.
+
+ This function is used by the driver entity to obtain the optimum ATA modes for
+ a specific device. The IDE controller driver takes into account the following
+ while calculating the mode:
+ - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
+
+ The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ for all the devices that belong to an enumeration group before calling
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
+
+ The IDE controller driver will use controller- and possibly platform-specific
+ algorithms to arrive at SupportedModes. The IDE controller may base its
+ decision on user preferences and other considerations as well. This function
+ may be called multiple times because the driver entity may renegotiate the mode
+ with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
+
+ The driver entity may collect timing information for various devices in any
+ order. The driver entity is responsible for making sure that all the dependencies
+ are satisfied. For example, the SupportedModes information for device A that
+ was previously returned may become stale after a call to
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
+
+ The buffer SupportedModes is allocated by the callee because the caller does
+ not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
+ is defined in a way that allows for future extensibility and can be of variable
+ length. This memory pool should be deallocated by the caller when it is no
+ longer necessary.
+
+ The IDE controller driver for a Serial ATA (SATA) controller can use this
+ member function to force a lower speed (first-generation [Gen1] speeds on a
+ second-generation [Gen2]-capable hardware). The IDE controller driver can
+ also allow the driver entity to stay with the speed that has been negotiated
+ by the physical layer.
+
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel A zero-based channel number.
+ @param[in] Device A zero-based device number on the Channel.
+ @param[out] SupportedModes The optimum modes for the device.
+
+ @retval EFI_SUCCESS SupportedModes was returned.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_INVALID_PARAMETER SupportedModes is NULL.
+ @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
+ data. This error may happen if
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
+ and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
+ were not called for at least one drive in the
+ same enumeration group.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitCalculateMode (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes
+ )
+;
+
+/**
+ Commands the IDE controller driver to program the IDE controller hardware
+ so that the specified device can operate at the specified mode.
+
+ This function is used by the driver entity to instruct the IDE controller
+ driver to program the IDE controller hardware to the specified modes. This
+ function can be called only once for a particular device. For a Serial ATA
+ (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
+ specific programming may be required.
+
+ @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
+ @param[in] Channel Zero-based channel number.
+ @param[in] Device Zero-based device number on the Channel.
+ @param[in] Modes The modes to set.
+
+ @retval EFI_SUCCESS The command was accepted without any errors.
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
+ @retval EFI_INVALID_PARAMETER Device is invalid.
+ @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.
+ @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.
+ The driver entity should not use this device.
+
+**/
+EFI_STATUS
+EFIAPI
+IdeInitSetTiming (
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
+ IN UINT8 Channel,
+ IN UINT8 Device,
+ IN EFI_ATA_COLLECTIVE_MODE *Modes
+ )
+;
+
+//
+// Forward reference declaration
+//
+/**
+ Retrieves a Unicode string that is the user readable name of the UEFI Driver.
+
+ @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
+ @param Language A pointer to a three character ISO 639-2 language identifier.
+ This is the language of the driver name that that the caller
+ is requesting, and it must match one of the languages specified
+ in SupportedLanguages. The number of languages supported by a
+ driver is up to the driver writer.
+ @param DriverName A pointer to the Unicode string to return. This Unicode string
+ is the name of the driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by This
+ and the language specified by Language was returned
+ in DriverName.
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+ @retval EFI_UNSUPPORTED The driver specified by This does not support the
+ language specified by Language.
+**/
+EFI_STATUS
+EFIAPI
+SataControllerComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+;
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by an UEFI Driver.
+
+ @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
+ @param ControllerHandle The handle of a controller that the driver specified by
+ This is managing. This handle specifies the controller
+ whose name is to be returned.
+ @param OPTIONAL ChildHandle The handle of the child controller to retrieve the name
+ of. This is an optional parameter that may be NULL. It
+ will be NULL for device drivers. It will also be NULL
+ for a bus drivers that wish to retrieve the name of the
+ bus controller. It will not be NULL for a bus driver
+ that wishes to retrieve the name of a child controller.
+ @param Language A pointer to a three character ISO 639-2 language
+ identifier. This is the language of the controller name
+ that that the caller is requesting, and it must match one
+ of the languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up to the
+ driver writer.
+ @param ControllerName A pointer to the Unicode string to return. This Unicode
+ string is the name of the controller specified by
+ ControllerHandle and ChildHandle in the language
+ specified by Language from the point of view of the
+ driver specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in the
+ language specified by Language for the driver
+ specified by This was returned in DriverName.
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+ @retval EFI_UNSUPPORTED The driver specified by This does not support the
+ language specified by Language.
+**/
+EFI_STATUS
+EFIAPI
+SataControllerComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle OPTIONAL,
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+;
+
+#endif
diff --git a/OvmfPkg/SataControllerDxe/SataControllerDxe.inf b/OvmfPkg/SataControllerDxe/SataControllerDxe.inf new file mode 100644 index 0000000000..42312062d7 --- /dev/null +++ b/OvmfPkg/SataControllerDxe/SataControllerDxe.inf @@ -0,0 +1,49 @@ +## @file
+#
+# Component description file for the Sata Controller driver.
+#
+# Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SataController
+ FILE_GUID = 021722D8-522B-4079-852A-FE44C2C13F49
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializeSataControllerDriver
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ ComponentName.c
+ SataController.c
+ SataController.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+ DebugLib
+ UefiLib
+ BaseLib
+ BaseMemoryLib
+ MemoryAllocationLib
+ UefiBootServicesTableLib
+
+[Protocols]
+ gEfiPciIoProtocolGuid
+ gEfiIdeControllerInitProtocolGuid
|