OvmfPkg/LsiScsiDxe: Process the SCSI Request Packet

This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.

v3:
  - Set DStat, SIst0, and SIst1 to 0 before using them
  - Amend the if statements for the DMA data instruction and add the
    assertions for the data direction
  - Also set SenseDataLength to 0 on the error path
  - Fix typos and amend comments
  - Amend the error handling of the calculation of transferred bytes
v2:
  - Use the BITx macros for the most of LSI_* constants
  - Fix a typo: contorller => controller
  - Add SeaBIOS lsi-scsi driver as one of the references of the script
  - Cast the result of sizeof to UINT32 for the instructions of the
    script
  - Drop the backslashes
  - Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
    already removed DUAL_ADDRESS_CYCLE
  - Add more comments for the script
  - Fix the check of the script size at the end of the script
  - Always set SenseDataLength to 0 to avoid the caller to access
    SenseData
  - Improve the error handling in LsiScsiProcessRequest()

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

5 files changed, 498 insertions, 1 deletions

diff --git a/OvmfPkg/Include/IndustryStandard/LsiScsi.h b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
index 185e553c8e..01d75323cd 100644
--- a/OvmfPkg/Include/IndustryStandard/LsiScsi.h
+++ b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
@@ -25,6 +25,19 @@
 #define LSI_REG_DSP               0x2C

 #define LSI_REG_SIST0             0x42

 #define LSI_REG_SIST1             0x43

+#define LSI_REG_CSBC              0xDC

+

+//

+// The status bits for DMA Status (DSTAT)

+//

+#define LSI_DSTAT_IID             BIT0

+#define LSI_DSTAT_R               BIT1

+#define LSI_DSTAT_SIR             BIT2

+#define LSI_DSTAT_SSI             BIT3

+#define LSI_DSTAT_ABRT            BIT4

+#define LSI_DSTAT_BF              BIT5

+#define LSI_DSTAT_MDPE            BIT6

+#define LSI_DSTAT_DFE             BIT7

 

 //

 // The status bits for Interrupt Status Zero (ISTAT0)

@@ -38,4 +51,55 @@
 #define LSI_ISTAT0_SRST           BIT6

 #define LSI_ISTAT0_ABRT           BIT7

 

+//

+// The status bits for SCSI Interrupt Status Zero (SIST0)

+//

+#define LSI_SIST0_PAR             BIT0

+#define LSI_SIST0_RST             BIT1

+#define LSI_SIST0_UDC             BIT2

+#define LSI_SIST0_SGE             BIT3

+#define LSI_SIST0_RSL             BIT4

+#define LSI_SIST0_SEL             BIT5

+#define LSI_SIST0_CMP             BIT6

+#define LSI_SIST0_MA              BIT7

+

+//

+// The status bits for SCSI Interrupt Status One (SIST1)

+//

+#define LSI_SIST1_HTH             BIT0

+#define LSI_SIST1_GEN             BIT1

+#define LSI_SIST1_STO             BIT2

+#define LSI_SIST1_R3              BIT3

+#define LSI_SIST1_SBMC            BIT4

+#define LSI_SIST1_R5              BIT5

+#define LSI_SIST1_R6              BIT6

+#define LSI_SIST1_R7              BIT7

+

+//

+// LSI 53C895A Script Instructions

+//

+#define LSI_INS_TYPE_BLK          0x00000000

+#define LSI_INS_TYPE_IO           BIT30

+#define LSI_INS_TYPE_TC           BIT31

+

+#define LSI_INS_BLK_SCSIP_DAT_OUT 0x00000000

+#define LSI_INS_BLK_SCSIP_DAT_IN  BIT24

+#define LSI_INS_BLK_SCSIP_CMD     BIT25

+#define LSI_INS_BLK_SCSIP_STAT    (BIT24 | BIT25)

+#define LSI_INS_BLK_SCSIP_MSG_OUT (BIT25 | BIT26)

+#define LSI_INS_BLK_SCSIP_MSG_IN  (BIT24 | BIT25 | BIT26)

+

+#define LSI_INS_IO_OPC_SEL        0x00000000

+#define LSI_INS_IO_OPC_WAIT_RESEL BIT28

+

+#define LSI_INS_TC_CP             BIT17

+#define LSI_INS_TC_JMP            BIT19

+#define LSI_INS_TC_RA             BIT23

+

+#define LSI_INS_TC_OPC_JMP        0x00000000

+#define LSI_INS_TC_OPC_INT        (BIT27 | BIT28)

+

+#define LSI_INS_TC_SCSIP_DAT_OUT  0x00000000

+#define LSI_INS_TC_SCSIP_MSG_IN   (BIT24 | BIT25 | BIT26)

+

 #endif // _LSI_SCSI_H_

diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
index 9859632e02..ed5fc3bfdd 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
@@ -45,6 +45,60 @@ Out8 (
 

 STATIC

 EFI_STATUS

+Out32 (

+  IN LSI_SCSI_DEV       *Dev,

+  IN UINT32             Addr,

+  IN UINT32             Data

+  )

+{

+  return Dev->PciIo->Io.Write (

+                          Dev->PciIo,

+                          EfiPciIoWidthUint32,

+                          PCI_BAR_IDX0,

+                          Addr,

+                          1,

+                          &Data

+                          );

+}

+

+STATIC

+EFI_STATUS

+In8 (

+  IN  LSI_SCSI_DEV *Dev,

+  IN  UINT32       Addr,

+  OUT UINT8        *Data

+  )

+{

+  return Dev->PciIo->Io.Read (

+                          Dev->PciIo,

+                          EfiPciIoWidthUint8,

+                          PCI_BAR_IDX0,

+                          Addr,

+                          1,

+                          Data

+                          );

+}

+

+STATIC

+EFI_STATUS

+In32 (

+  IN  LSI_SCSI_DEV *Dev,

+  IN  UINT32       Addr,

+  OUT UINT32       *Data

+  )

+{

+  return Dev->PciIo->Io.Read (

+                          Dev->PciIo,

+                          EfiPciIoWidthUint32,

+                          PCI_BAR_IDX0,

+                          Addr,

+                          1,

+                          Data

+                          );

+}

+

+STATIC

+EFI_STATUS

 LsiScsiReset (

   IN LSI_SCSI_DEV *Dev

   )

@@ -141,6 +195,357 @@ LsiScsiCheckRequest (
   return EFI_SUCCESS;

 }

 

+/**

+

+  Interpret the request packet from the Extended SCSI Pass Thru Protocol and

+  compose the script to submit the command and data to the controller.

+

+  @param[in] Dev          The LSI 53C895A SCSI device the packet targets.

+

+  @param[in] Target       The SCSI target controlled by the LSI 53C895A SCSI

+                          device.

+

+  @param[in] Lun          The Logical Unit Number under the SCSI target.

+

+  @param[in out] Packet   The Extended SCSI Pass Thru Protocol packet.

+

+

+  @retval EFI_SUCCESS  The Extended SCSI Pass Thru Protocol packet was valid.

+

+  @return              Otherwise, invalid or unsupported parameters were

+                       detected. Status codes are meant for direct forwarding

+                       by the EFI_EXT_SCSI_PASS_THRU_PROTOCOL.PassThru()

+                       implementation.

+

+ **/

+STATIC

+EFI_STATUS

+LsiScsiProcessRequest (

+  IN LSI_SCSI_DEV                                   *Dev,

+  IN UINT8                                          Target,

+  IN UINT64                                         Lun,

+  IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet

+  )

+{

+  EFI_STATUS Status;

+  UINT32     *Script;

+  UINT8      *Cdb;

+  UINT8      *MsgOut;

+  UINT8      *MsgIn;

+  UINT8      *ScsiStatus;

+  UINT8      *Data;

+  UINT8      DStat;

+  UINT8      SIst0;

+  UINT8      SIst1;

+  UINT32     Csbc;

+  UINT32     CsbcBase;

+  UINT32     Transferred;

+

+  Script      = Dev->Dma->Script;

+  Cdb         = Dev->Dma->Cdb;

+  Data        = Dev->Dma->Data;

+  MsgIn       = Dev->Dma->MsgIn;

+  MsgOut      = &Dev->Dma->MsgOut;

+  ScsiStatus  = &Dev->Dma->Status;

+

+  *ScsiStatus = 0xFF;

+

+  DStat = 0;

+  SIst0 = 0;

+  SIst1 = 0;

+

+  SetMem (Cdb, sizeof Dev->Dma->Cdb, 0x00);

+  CopyMem (Cdb, Packet->Cdb, Packet->CdbLength);

+

+  //

+  // Fetch the first Cumulative SCSI Byte Count (CSBC).

+  //

+  // CSBC is a cumulative counter of the actual number of bytes that have been

+  // transferred across the SCSI bus during data phases, i.e. it will not

+  // count bytes sent in command, status, message in and out phases.

+  //

+  Status = In32 (Dev, LSI_REG_CSBC, &CsbcBase);

+  if (EFI_ERROR (Status)) {

+    goto Error;

+  }

+

+  //

+  // Clean up the DMA buffer for the script.

+  //

+  SetMem (Script, sizeof Dev->Dma->Script, 0x00);

+

+  //

+  // Compose the script to transfer data between the host and the device.

+  //

+  // References:

+  //   * LSI53C895A PCI to Ultra2 SCSI Controller Version 2.2

+  //     - Chapter 5 SCSI SCRIPT Instruction Set

+  //   * SEABIOS lsi-scsi driver

+  //

+  // All instructions used here consist of 2 32bit words. The first word

+  // contains the command to execute. The second word is loaded into the

+  // DMA SCRIPTS Pointer Save (DSPS) register as either the DMA address

+  // for data transmission or the address/offset for the jump command.

+  // Some commands, such as the selection of the target, don't need to

+  // transfer data through DMA or jump to another instruction, then DSPS

+  // has to be zero.

+  //

+  // There are 3 major parts in this script. The first part (1~3) contains

+  // the instructions to select target and LUN and send the SCSI command

+  // from the request packet. The second part (4~7) is to handle the

+  // potential disconnection and prepare for the data transmission. The

+  // instructions in the third part (8~10) transmit the given data and

+  // collect the result. Instruction 11 raises the interrupt and marks the

+  // end of the script.

+  //

+

+  //

+  // 1. Select target.

+  //

+  *Script++ = LSI_INS_TYPE_IO | LSI_INS_IO_OPC_SEL | (UINT32)Target << 16;

+  *Script++ = 0x00000000;

+

+  //

+  // 2. Select LUN.

+  //

+  *MsgOut   = 0x80 | (UINT8) Lun; // 0x80: Identify bit

+  *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_MSG_OUT |

+              (UINT32)sizeof Dev->Dma->MsgOut;

+  *Script++ = LSI_SCSI_DMA_ADDR (Dev, MsgOut);

+

+  //

+  // 3. Send the SCSI Command.

+  //

+  *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_CMD |

+              (UINT32)sizeof Dev->Dma->Cdb;

+  *Script++ = LSI_SCSI_DMA_ADDR (Dev, Cdb);

+

+  //

+  // 4. Check whether the current SCSI phase is "Message In" or not

+  //    and jump to 7 if it is.

+  //    Note: LSI_INS_TC_RA stands for "Relative Address Mode", so the

+  //          offset 0x18 in the second word means jumping forward

+  //          3 (0x18/8) instructions.

+  //

+  *Script++ = LSI_INS_TYPE_TC | LSI_INS_TC_OPC_JMP |

+              LSI_INS_TC_SCSIP_MSG_IN | LSI_INS_TC_RA |

+              LSI_INS_TC_CP;

+  *Script++ = 0x00000018;

+

+  //

+  // 5. Read "Message" from the initiator to trigger reselect.

+  //

+  *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_MSG_IN |

+              (UINT32)sizeof Dev->Dma->MsgIn;

+  *Script++ = LSI_SCSI_DMA_ADDR (Dev, MsgIn);

+

+  //

+  // 6. Wait reselect.

+  //

+  *Script++ = LSI_INS_TYPE_IO | LSI_INS_IO_OPC_WAIT_RESEL;

+  *Script++ = 0x00000000;

+

+  //

+  // 7. Read "Message" from the initiator again

+  //

+  *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_MSG_IN |

+              (UINT32)sizeof Dev->Dma->MsgIn;

+  *Script++ = LSI_SCSI_DMA_ADDR (Dev, MsgIn);

+

+  //

+  // 8. Set the DMA command for the read/write operations.

+  //    Note: Some requests, e.g. "TEST UNIT READY", do not come with

+  //          allocated InDataBuffer or OutDataBuffer. We skip the DMA

+  //          data command for those requests or this script would fail

+  //          with LSI_SIST0_SGE due to the zero data length.

+  //

+  // LsiScsiCheckRequest() prevents both integer overflows in the command

+  // opcodes, and buffer overflows.

+  //

+  if (Packet->InTransferLength > 0) {

+    ASSERT (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ);

+    ASSERT (Packet->InTransferLength <= sizeof Dev->Dma->Data);

+    *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_DAT_IN |

+                Packet->InTransferLength;

+    *Script++ = LSI_SCSI_DMA_ADDR (Dev, Data);

+  } else if (Packet->OutTransferLength > 0) {

+    ASSERT (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_WRITE);

+    ASSERT (Packet->OutTransferLength <= sizeof Dev->Dma->Data);

+    CopyMem (Data, Packet->OutDataBuffer, Packet->OutTransferLength);

+    *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_DAT_OUT |

+                Packet->OutTransferLength;

+    *Script++ = LSI_SCSI_DMA_ADDR (Dev, Data);

+  }

+

+  //

+  // 9. Get the SCSI status.

+  //

+  *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_STAT |

+              (UINT32)sizeof Dev->Dma->Status;

+  *Script++ = LSI_SCSI_DMA_ADDR (Dev, Status);

+

+  //

+  // 10. Get the SCSI message.

+  //

+  *Script++ = LSI_INS_TYPE_BLK | LSI_INS_BLK_SCSIP_MSG_IN |

+              (UINT32)sizeof Dev->Dma->MsgIn;

+  *Script++ = LSI_SCSI_DMA_ADDR (Dev, MsgIn);

+

+  //

+  // 11. Raise the interrupt to end the script.

+  //

+  *Script++ = LSI_INS_TYPE_TC | LSI_INS_TC_OPC_INT |

+              LSI_INS_TC_SCSIP_DAT_OUT | LSI_INS_TC_JMP;

+  *Script++ = 0x00000000;

+

+  //

+  // Make sure the size of the script doesn't exceed the buffer.

+  //

+  ASSERT (Script <= Dev->Dma->Script + ARRAY_SIZE (Dev->Dma->Script));

+

+  //

+  // The controller starts to execute the script once the DMA Script

+  // Pointer (DSP) register is set.

+  //

+  Status = Out32 (Dev, LSI_REG_DSP, LSI_SCSI_DMA_ADDR (Dev, Script));

+  if (EFI_ERROR (Status)) {

+    goto Error;

+  }

+

+  //

+  // Poll the device registers (DSTAT, SIST0, and SIST1) until the SIR

+  // bit sets.

+  //

+  for(;;) {

+    Status = In8 (Dev, LSI_REG_DSTAT, &DStat);

+    if (EFI_ERROR (Status)) {

+      goto Error;

+    }

+    Status = In8 (Dev, LSI_REG_SIST0, &SIst0);

+    if (EFI_ERROR (Status)) {

+      goto Error;

+    }

+    Status = In8 (Dev, LSI_REG_SIST1, &SIst1);

+    if (EFI_ERROR (Status)) {

+      goto Error;

+    }

+

+    if (SIst0 != 0 || SIst1 != 0) {

+      goto Error;

+    }

+

+    //

+    // Check the SIR (SCRIPTS Interrupt Instruction Received) bit.

+    //

+    if (DStat & LSI_DSTAT_SIR) {

+      break;

+    }

+

+    gBS->Stall (Dev->StallPerPollUsec);

+  }

+

+  //

+  // Check if everything is good.

+  //   SCSI Message Code 0x00: COMMAND COMPLETE

+  //   SCSI Status  Code 0x00: Good

+  //

+  if (MsgIn[0] != 0 || *ScsiStatus != 0) {

+    goto Error;

+  }

+

+  //

+  // Fetch CSBC again to calculate the transferred bytes and update

+  // InTransferLength/OutTransferLength.

+  //

+  // Note: The number of transferred bytes is bounded by

+  //       "sizeof Dev->Dma->Data", so it's safe to subtract CsbcBase

+  //       from Csbc. If the CSBC register wraps around, the correct

+  //       difference is ensured by the standard C modular arithmetic.

+  //

+  Status = In32 (Dev, LSI_REG_CSBC, &Csbc);

+  if (EFI_ERROR (Status)) {

+    goto Error;

+  }

+

+  Transferred = Csbc - CsbcBase;

+  if (Packet->InTransferLength > 0) {

+    if (Transferred <= Packet->InTransferLength) {

+      Packet->InTransferLength = Transferred;

+    } else {

+      goto Error;

+    }

+  } else if (Packet->OutTransferLength > 0) {

+    if (Transferred <= Packet->OutTransferLength) {

+      Packet->OutTransferLength = Transferred;

+    } else {

+      goto Error;

+    }

+  }

+

+  //

+  // Copy Data to InDataBuffer if necessary.

+  //

+  if (Packet->DataDirection == EFI_EXT_SCSI_DATA_DIRECTION_READ) {

+    CopyMem (Packet->InDataBuffer, Data, Packet->InTransferLength);

+  }

+

+  //

+  // Always set SenseDataLength to 0.

+  // The instructions of LSI53C895A don't reply sense data. Instead, it

+  // relies on the SCSI command, "REQUEST SENSE", to get sense data. We set

+  // SenseDataLength to 0 to notify ScsiDiskDxe that there is no sense data

+  // written even if this request is processed successfully, so that It will

+  // issue "REQUEST SENSE" later to retrieve sense data.

+  //

+  Packet->SenseDataLength   = 0;

+  Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OK;

+  Packet->TargetStatus      = EFI_EXT_SCSI_STATUS_TARGET_GOOD;

+

+  return EFI_SUCCESS;

+

+Error:

+  DEBUG ((DEBUG_VERBOSE, "%a: dstat: %02X, sist0: %02X, sist1: %02X\n",

+    __FUNCTION__, DStat, SIst0, SIst1));

+  //

+  // Update the request packet to reflect the status.

+  //

+  if (*ScsiStatus != 0xFF) {

+    Packet->TargetStatus    = *ScsiStatus;

+  } else {

+    Packet->TargetStatus    = EFI_EXT_SCSI_STATUS_TARGET_TASK_ABORTED;

+  }

+

+  if (SIst0 & LSI_SIST0_PAR) {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_PARITY_ERROR;

+  } else if (SIst0 & LSI_SIST0_RST) {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_BUS_RESET;

+  } else if (SIst0 & LSI_SIST0_UDC) {

+    //

+    // The target device is disconnected unexpectedly. According to UEFI spec,

+    // this is TIMEOUT_COMMAND.

+    //

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND;

+  } else if (SIst0 & LSI_SIST0_SGE) {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN;

+  } else if (SIst1 & LSI_SIST1_HTH) {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT;

+  } else if (SIst1 & LSI_SIST1_GEN) {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_TIMEOUT;

+  } else if (SIst1 & LSI_SIST1_STO) {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT;

+  } else {

+    Packet->HostAdapterStatus = EFI_EXT_SCSI_STATUS_HOST_ADAPTER_OTHER;

+  }

+

+  //

+  // SenseData may be used to inspect the error. Since we don't set sense data,

+  // SenseDataLength has to be 0.

+  //

+  Packet->SenseDataLength = 0;

+

+  return EFI_DEVICE_ERROR;

+}

+

 //

 // The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL

 // for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,

@@ -168,7 +573,7 @@ LsiScsiPassThru (
     return Status;

   }

 

-  return EFI_UNSUPPORTED;

+  return LsiScsiProcessRequest (Dev, *Target, Lun, Packet);

 }

 

 EFI_STATUS

@@ -474,6 +879,7 @@ LsiScsiControllerStart (
     );

   Dev->MaxTarget = PcdGet8 (PcdLsiScsiMaxTargetLimit);

   Dev->MaxLun = PcdGet8 (PcdLsiScsiMaxLunLimit);

+  Dev->StallPerPollUsec = PcdGet32 (PcdLsiScsiStallPerPollUsec);

 

   Status = gBS->OpenProtocol (

                   ControllerHandle,

diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
index 05deeed379..6ecf523f5a 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
@@ -14,6 +14,11 @@
 

 typedef struct {

   //

+  // Allocate 32 UINT32 entries for the script and it's sufficient for

+  // 16 instructions.

+  //

+  UINT32                          Script[32];

+  //

   // The max size of CDB is 32.

   //

   UINT8                           Cdb[32];

@@ -25,6 +30,18 @@ typedef struct {
   //       Count (DBC), a 24-bit register, so the maximum is 0xFFFFFF (16MB-1).

   //

   UINT8                           Data[SIZE_64KB];

+  //

+  // For SCSI Message In phase

+  //

+  UINT8                           MsgIn[2];

+  //

+  // For SCSI Message Out phase

+  //

+  UINT8                           MsgOut;

+  //

+  // For SCSI Status phase

+  //

+  UINT8                           Status;

 } LSI_SCSI_DMA_BUFFER;

 

 typedef struct {

@@ -34,6 +51,7 @@ typedef struct {
   EFI_PCI_IO_PROTOCOL             *PciIo;

   UINT8                           MaxTarget;

   UINT8                           MaxLun;

+  UINT32                          StallPerPollUsec;

   LSI_SCSI_DMA_BUFFER             *Dma;

   EFI_PHYSICAL_ADDRESS            DmaPhysical;

   VOID                            *DmaMapping;

@@ -46,6 +64,9 @@ typedef struct {
 #define LSI_SCSI_FROM_PASS_THRU(PassThruPtr) \

   CR (PassThruPtr, LSI_SCSI_DEV, PassThru, LSI_SCSI_DEV_SIGNATURE)

 

+#define LSI_SCSI_DMA_ADDR(Dev, MemberName) \

+  ((UINT32)(Dev->DmaPhysical + OFFSET_OF (LSI_SCSI_DMA_BUFFER, MemberName)))

+

 

 //

 // Probe, start and stop functions of this driver, called by the DXE core for

diff --git a/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf b/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
index 6111449577..4c7abcec61 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
+++ b/OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
@@ -41,3 +41,6 @@
 [FixedPcd]

   gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxTargetLimit   ## CONSUMES

   gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxLunLimit      ## CONSUMES

+

+[Pcd]

+  gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiStallPerPollUsec ## CONSUMES

diff --git a/OvmfPkg/OvmfPkg.dec b/OvmfPkg/OvmfPkg.dec
index ca13a3cb11..f16c00ad5b 100644
--- a/OvmfPkg/OvmfPkg.dec
+++ b/OvmfPkg/OvmfPkg.dec
@@ -179,6 +179,9 @@
   gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxTargetLimit|7|UINT8|0x3b

   gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiMaxLunLimit|0|UINT8|0x3c

 

+  ## Microseconds to stall between polling for LsiScsi request result

+  gUefiOvmfPkgTokenSpaceGuid.PcdLsiScsiStallPerPollUsec|5|UINT32|0x3d

+

   gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogBase|0x0|UINT32|0x8

   gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogSize|0x0|UINT32|0x9

   gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize|0x0|UINT32|0xa