PcAtChipsetPkg: Clean up source files

1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

11 files changed, 51 insertions, 51 deletions

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c b/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
index 2f3cb4bca4..9817bea21f 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/AcpiTimerLib.c
@@ -58,13 +58,13 @@ AcpiTimerLibConstructor (
   UINT8   EnableMask;

 

   //

-  // ASSERT for the invalid PCD values. They must be configured to the real value. 

+  // ASSERT for the invalid PCD values. They must be configured to the real value.

   //

   ASSERT (PcdGet16 (PcdAcpiIoPciBarRegisterOffset) != 0xFFFF);

   ASSERT (PcdGet16 (PcdAcpiIoPortBaseAddress)      != 0xFFFF);

 

   //

-  // If the register offset to the BAR for the ACPI I/O Port Base Address is 0x0000, then 

+  // If the register offset to the BAR for the ACPI I/O Port Base Address is 0x0000, then

   // no PCI register programming is required to enable access to the the ACPI registers

   // specified by PcdAcpiIoPortBaseAddress

   //

@@ -73,7 +73,7 @@ AcpiTimerLibConstructor (
   }

 

   //

-  // ASSERT for the invalid PCD values. They must be configured to the real value. 

+  // ASSERT for the invalid PCD values. They must be configured to the real value.

   //

   ASSERT (PcdGet8  (PcdAcpiIoPciDeviceNumber)   != 0xFF);

   ASSERT (PcdGet8  (PcdAcpiIoPciFunctionNumber) != 0xFF);

@@ -101,7 +101,7 @@ AcpiTimerLibConstructor (
       EnableMask

       );

   }

-  

+

   return RETURN_SUCCESS;

 }

 

@@ -119,23 +119,23 @@ InternalAcpiGetAcpiTimerIoPort (
   )

 {

   UINT16  Port;

-  

+

   Port = PcdGet16 (PcdAcpiIoPortBaseAddress);

-  

+

   //

-  // If the register offset to the BAR for the ACPI I/O Port Base Address is not 0x0000, then 

-  // read the PCI register for the ACPI BAR value in case the BAR has been programmed to a 

+  // If the register offset to the BAR for the ACPI I/O Port Base Address is not 0x0000, then

+  // read the PCI register for the ACPI BAR value in case the BAR has been programmed to a

   // value other than PcdAcpiIoPortBaseAddress

   //

   if (PcdGet16 (PcdAcpiIoPciBarRegisterOffset) != 0x0000) {

     Port = PciRead16 (PCI_LIB_ADDRESS (

-                        PcdGet8  (PcdAcpiIoPciBusNumber), 

-                        PcdGet8  (PcdAcpiIoPciDeviceNumber), 

-                        PcdGet8  (PcdAcpiIoPciFunctionNumber), 

+                        PcdGet8  (PcdAcpiIoPciBusNumber),

+                        PcdGet8  (PcdAcpiIoPciDeviceNumber),

+                        PcdGet8  (PcdAcpiIoPciFunctionNumber),

                         PcdGet16 (PcdAcpiIoPciBarRegisterOffset)

                         ));

   }

-  

+

   return (Port & PcdGet16 (PcdAcpiIoPortBaseAddressMask)) + PcdGet16 (PcdAcpiPm1TmrOffset);

 }

 

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.c b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.c
index 29521f8b22..2d79c6c1f1 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.c
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.c
@@ -1,7 +1,7 @@
 /** @file

   ACPI Timer implements one instance of Timer Library.

 

-  Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>

+  Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>

   This program and the accompanying materials

   are licensed and made available under the terms and conditions of the BSD License

   which accompanies this distribution.  The full text of the license may be found at

@@ -47,7 +47,7 @@ InternalCalculateTscFrequency (
 UINT64

 InternalGetPerformanceCounterFrequency (

   VOID

-  ) 

+  )

 {

   return InternalCalculateTscFrequency ();

 }

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf
index 0113b26d36..b7f737e30a 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.inf
@@ -7,7 +7,7 @@
 #  Note: The implementation uses the lower 24-bits of the ACPI timer and

 #  is compatible with both 24-bit and 32-bit ACPI timers.

 #

-#  Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>

+#  Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>

 #  This program and the accompanying materials

 #  are licensed and made available under the terms and conditions of the BSD License

 #  which accompanies this distribution.  The full text of the license may be found at

@@ -31,7 +31,7 @@
 [Sources]

   AcpiTimerLib.c

   BaseAcpiTimerLib.c

-  

+

 [Packages]

   MdePkg/MdePkg.dec

   PcAtChipsetPkg/PcAtChipsetPkg.dec

@@ -52,4 +52,4 @@
   gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciBarRegisterOffset     ## CONSUMES

   gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddress          ## CONSUMES

   gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiPm1TmrOffset               ## CONSUMES

-  gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddressMask      ## CONSUMES
\ No newline at end of file
+  gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddressMask      ## CONSUMES

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.uni b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.uni
index 7e26a6a456..c0421c3b5a 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.uni
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/BaseAcpiTimerLib.uni
@@ -4,13 +4,13 @@
 // Provides basic timer support using the ACPI timer hardware.  The performance

 // counter features are provided by the processors time stamp counter.

 //

-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>

+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>

 //

 // This program and the accompanying materials

 // are licensed and made available under the terms and conditions of the BSD License

 // which accompanies this distribution.  The full text of the license may be found at

 // http://opensource.org/licenses/bsd-license.php

-// 

+//

 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 //

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.c b/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.c
index 67e18a1360..9ed10ef2e2 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.c
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.c
@@ -1,7 +1,7 @@
 /** @file

   ACPI Timer implements one instance of Timer Library.

 

-  Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>

+  Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>

   This program and the accompanying materials

   are licensed and made available under the terms and conditions of the BSD License

   which accompanies this distribution.  The full text of the license may be found at

@@ -70,13 +70,13 @@ UINT64  mPerformanceCounterFrequency = 0;
 UINT64

 InternalGetPerformanceCounterFrequency (

   VOID

-  ) 

+  )

 {

   return  mPerformanceCounterFrequency;

 }

 

 /**

-  The constructor function enables ACPI IO space, and caches PerformanceCounterFrequency. 

+  The constructor function enables ACPI IO space, and caches PerformanceCounterFrequency.

 

   @param  ImageHandle   The firmware allocated handle for the EFI image.

   @param  SystemTable   A pointer to the EFI System Table.

diff --git a/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.uni b/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.uni
index c90da29fdd..bf31abf81d 100644
--- a/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.uni
+++ b/PcAtChipsetPkg/Library/AcpiTimerLib/DxeAcpiTimerLib.uni
@@ -4,13 +4,13 @@
 // Provides basic timer support using the ACPI timer hardware.  The performance

 // counter features are provided by the processors time stamp counter.

 //

-// Copyright (c) 2013 - 2014, Intel Corporation. All rights reserved.<BR>

+// Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR>

 //

 // This program and the accompanying materials

 // are licensed and made available under the terms and conditions of the BSD License

 // which accompanies this distribution.  The full text of the license may be found at

 // http://opensource.org/licenses/bsd-license.php

-// 

+//

 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 //

diff --git a/PcAtChipsetPkg/Library/BaseIoApicLib/BaseIoApicLib.uni b/PcAtChipsetPkg/Library/BaseIoApicLib/BaseIoApicLib.uni
index fb8320fa4f..9b533a33f1 100644
--- a/PcAtChipsetPkg/Library/BaseIoApicLib/BaseIoApicLib.uni
+++ b/PcAtChipsetPkg/Library/BaseIoApicLib/BaseIoApicLib.uni
@@ -3,13 +3,13 @@
 //

 // Library instance for I/O APIC library class.

 //

-// Copyright (c) 2011 - 2014, Intel Corporation. All rights reserved.<BR>

+// Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>

 //

 // This program and the accompanying materials

 // are licensed and made available under the terms and conditions of the BSD License

 // which accompanies this distribution.  The full text of the license may be found at

 // http://opensource.org/licenses/bsd-license.php

-// 

+//

 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 //

diff --git a/PcAtChipsetPkg/Library/BaseIoApicLib/IoApicLib.c b/PcAtChipsetPkg/Library/BaseIoApicLib/IoApicLib.c
index 42b3f21ec1..0b8f888e7e 100644
--- a/PcAtChipsetPkg/Library/BaseIoApicLib/IoApicLib.c
+++ b/PcAtChipsetPkg/Library/BaseIoApicLib/IoApicLib.c
@@ -1,10 +1,10 @@
-/** @file 

+/** @file

   I/O APIC library.

 

   I/O APIC library assumes I/O APIC is enabled. It does not

   handles cases where I/O APIC is disabled.

 

-  Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>

+  Copyright (c) 2011 - 2018, Intel Corporation. All rights reserved.<BR>

   This program and the accompanying materials

   are licensed and made available under the terms and conditions of the BSD License

   which accompanies this distribution.  The full text of the license may be found at

@@ -30,7 +30,7 @@
   Read a 32-bit I/O APIC register.

 

   If Index is >= 0x100, then ASSERT().

-  

+

   @param  Index  Specifies the I/O APIC register to read.

 

   @return  The 32-bit value read from the I/O APIC register specified by Index.

@@ -50,7 +50,7 @@ IoApicRead (
   Write a 32-bit I/O APIC register.

 

   If Index is >= 0x100, then ASSERT().

-  

+

   @param  Index  Specifies the I/O APIC register to write.

   @param  Value  Specifies the value to write to the I/O APIC register specified by Index.

 

@@ -71,7 +71,7 @@ IoApicWrite (
 /**

   Set the interrupt mask of an I/O APIC interrupt.

 

-  If Irq is larger than the maximum number I/O APIC redirection entries, then ASSERT(). 

+  If Irq is larger than the maximum number I/O APIC redirection entries, then ASSERT().

 

   @param  Irq     Specifies the I/O APIC interrupt to enable or disable.

   @param  Enable  If TRUE, then enable the I/O APIC interrupt specified by Irq.

@@ -98,13 +98,13 @@ IoApicEnableInterrupt (
 

 /**

   Configures an I/O APIC interrupt.

-  

+

   Configure an I/O APIC Redirection Table Entry to deliver an interrupt in physical

-  mode to the Local APIC of the currntly executing CPU.  The default state of the 

+  mode to the Local APIC of the currntly executing CPU.  The default state of the

   entry is for the interrupt to be disabled (masked).  IoApicEnableInterrupts() must

   be used to enable(unmask) the I/O APIC Interrupt.

- 

-  If Irq is larger than the maximum number I/O APIC redirection entries, then ASSERT(). 

+

+  If Irq is larger than the maximum number I/O APIC redirection entries, then ASSERT().

   If Vector >= 0x100, then ASSERT().

   If DeliveryMode is not supported, then ASSERT().

 

@@ -142,11 +142,11 @@ IoApicConfigureInterrupt (
   ASSERT (Irq <= Version.Bits.MaximumRedirectionEntry);

   ASSERT (Vector <= 0xFF);

   ASSERT (DeliveryMode < 8 && DeliveryMode != 6 && DeliveryMode != 3);

-  

+

   Entry.Uint32.Low = IoApicRead (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2);

   Entry.Bits.Vector          = (UINT8)Vector;

   Entry.Bits.DeliveryMode    = (UINT32)DeliveryMode;

-  Entry.Bits.DestinationMode = 0; 

+  Entry.Bits.DestinationMode = 0;

   Entry.Bits.Polarity        = AssertionLevel ? 0 : 1;

   Entry.Bits.TriggerMode     = LevelTriggered ? 1 : 0;

   Entry.Bits.Mask            = 1;

diff --git a/PcAtChipsetPkg/Library/ResetSystemLib/ResetSystemLib.uni b/PcAtChipsetPkg/Library/ResetSystemLib/ResetSystemLib.uni
index e2ba61c76e..be6f29f56b 100644
--- a/PcAtChipsetPkg/Library/ResetSystemLib/ResetSystemLib.uni
+++ b/PcAtChipsetPkg/Library/ResetSystemLib/ResetSystemLib.uni
@@ -3,13 +3,13 @@
 //

 // Library instance for ResetSystem library class for PCAT systems

 //

-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>

+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>

 //

 // This program and the accompanying materials

 // are licensed and made available under the terms and conditions of the BSD License

 // which accompanies this distribution.  The full text of the license may be found at

 // http://opensource.org/licenses/bsd-license.php

-// 

+//

 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 //

diff --git a/PcAtChipsetPkg/Library/SerialIoLib/PcAtSerialPortLib.uni b/PcAtChipsetPkg/Library/SerialIoLib/PcAtSerialPortLib.uni
index a1ad72e7b8..e42e0eba5a 100644
--- a/PcAtChipsetPkg/Library/SerialIoLib/PcAtSerialPortLib.uni
+++ b/PcAtChipsetPkg/Library/SerialIoLib/PcAtSerialPortLib.uni
@@ -3,13 +3,13 @@
 //

 // Library instance for SerialIO library class.

 //

-// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>

+// Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>

 //

 // This program and the accompanying materials

 // are licensed and made available under the terms and conditions of the BSD License

 // which accompanies this distribution.  The full text of the license may be found at

 // http://opensource.org/licenses/bsd-license.php

-// 

+//

 // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

 // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 //

diff --git a/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c b/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
index 0a2e20c1d9..d1a1c6a03f 100644
--- a/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
+++ b/PcAtChipsetPkg/Library/SerialIoLib/SerialPortLib.c
@@ -1,7 +1,7 @@
 /** @file

   UART Serial Port library functions

 

-  Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>

+  Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>

   This program and the accompanying materials

   are licensed and made available under the terms and conditions of the BSD License

   which accompanies this distribution.  The full text of the license may be found at

@@ -58,11 +58,11 @@ UINT8   gBreakSet = 0;
 

 /**

   Initialize the serial device hardware.

-  

+

   If no initialization is required, then return RETURN_SUCCESS.

   If the serial device was successfully initialized, then return RETURN_SUCCESS.

   If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.

-  

+

   @retval RETURN_SUCCESS        The serial device was initialized.

   @retval RETURN_DEVICE_ERROR   The serail device could not be initialized.

 

@@ -86,7 +86,7 @@ SerialPortInitialize (
   // Calculate divisor for baud generator

   //

   Divisor = 115200 / gBps;

-  

+

   //

   // Set communications format

   //

@@ -109,13 +109,13 @@ SerialPortInitialize (
 }

 

 /**

-  Write data from buffer to serial device. 

- 

-  Writes NumberOfBytes data bytes from Buffer to the serial device.  

+  Write data from buffer to serial device.

+

+  Writes NumberOfBytes data bytes from Buffer to the serial device.

   The number of bytes actually written to the serial device is returned.

   If the return value is less than NumberOfBytes, then the write operation failed.

 

-  If Buffer is NULL, then ASSERT(). 

+  If Buffer is NULL, then ASSERT().

 

   If NumberOfBytes is zero, then return 0.

 

@@ -123,7 +123,7 @@ SerialPortInitialize (
   @param  NumberOfBytes    Number of bytes to written to the serial device.

 

   @retval 0                NumberOfBytes is 0.

-  @retval >0               The number of bytes written to the serial device.  

+  @retval >0               The number of bytes written to the serial device.

                            If this value is less than NumberOfBytes, then the write operation failed.

 

 **/

@@ -164,7 +164,7 @@ SerialPortWrite (
   @param  NumberOfBytes    Number of bytes to read from the serial device.

 

   @retval 0                NumberOfBytes is 0.

-  @retval >0               The number of bytes read from the serial device.  

+  @retval >0               The number of bytes read from the serial device.

                            If this value is less than NumberOfBytes, then the read operation failed.

 

 **/