diff options
Diffstat (limited to 'ArmPlatformPkg/Drivers')
| -rw-r--r-- | ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c | 38 |
1 files changed, 21 insertions, 17 deletions
diff --git a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c b/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c index d9280cd0bb..fdb9ff490e 100644 --- a/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c +++ b/ArmPlatformPkg/Drivers/PL011Uart/PL011Uart.c @@ -31,12 +31,12 @@ RETURN_STATUS
EFIAPI
PL011UartInitializePort (
- IN UINTN UartBase,
- IN UINT64 BaudRate,
- IN UINT32 ReceiveFifoDepth,
- IN EFI_PARITY_TYPE Parity,
- IN UINT8 DataBits,
- IN EFI_STOP_BITS_TYPE StopBits
+ IN OUT UINTN UartBase,
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
)
{
UINT32 LineControl;
@@ -47,19 +47,21 @@ PL011UartInitializePort ( // The PL011 supports a buffer of either 1 or 32 chars. Therefore we can accept
// 1 char buffer as the minimum fifo size. Because everything can be rounded down,
// there is no maximum fifo size.
- if (ReceiveFifoDepth == 0) {
+ if ((*ReceiveFifoDepth == 0) || (*ReceiveFifoDepth >= 32)) {
LineControl |= PL011_UARTLCR_H_FEN;
- } else if (ReceiveFifoDepth < 32) {
+ *ReceiveFifoDepth = 32;
+ } else {
+ ASSERT (*ReceiveFifoDepth < 32);
// Nothing else to do. 1 byte fifo is default.
- } else if (ReceiveFifoDepth >= 32) {
- LineControl |= PL011_UARTLCR_H_FEN;
+ *ReceiveFifoDepth = 1;
}
//
// Parity
//
- switch (Parity) {
+ switch (*Parity) {
case DefaultParity:
+ *Parity = NoParity;
case NoParity:
// Nothing to do. Parity is disabled by default.
break;
@@ -82,8 +84,9 @@ PL011UartInitializePort ( //
// Data Bits
//
- switch (DataBits) {
+ switch (*DataBits) {
case 0:
+ *DataBits = 8;
case 8:
LineControl |= PL011_UARTLCR_H_WLEN_8;
break;
@@ -103,8 +106,9 @@ PL011UartInitializePort ( //
// Stop Bits
//
- switch (StopBits) {
+ switch (*StopBits) {
case DefaultStopBits:
+ *StopBits = OneStopBit;
case OneStopBit:
// Nothing to do. One stop bit is enabled by default.
break;
@@ -132,14 +136,14 @@ PL011UartInitializePort ( MmioWrite32 (UartBase + UARTIBRD, PcdGet32 (PL011UartInteger));
MmioWrite32 (UartBase + UARTFBRD, PcdGet32 (PL011UartFractional));
} else {
- BaudRate = PcdGet32 (PcdSerialBaudRate);
- ASSERT (BaudRate != 0);
+ *BaudRate = PcdGet32 (PcdSerialBaudRate);
+ ASSERT (*BaudRate != 0);
}
}
// If BaudRate != 0 then we must calculate the divisor from the value
- if (BaudRate != 0) {
- Divisor = (PcdGet32 (PL011UartClkInHz) * 4) / BaudRate;
+ if (*BaudRate != 0) {
+ Divisor = (PcdGet32 (PL011UartClkInHz) * 4) / *BaudRate;
MmioWrite32 (UartBase + UARTIBRD, Divisor >> 6);
MmioWrite32 (UartBase + UARTFBRD, Divisor & 0x3F);
}
|