diff options
Diffstat (limited to 'MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c')
| -rw-r--r-- | MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c | 23 |
1 files changed, 12 insertions, 11 deletions
diff --git a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c index c3eec8bcd4..ddf6dcf2c4 100644 --- a/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c +++ b/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHci.c @@ -721,7 +721,7 @@ SdMmcHcStopClock ( @param[in] PciIo The PCI IO protocol instance.
@param[in] Slot The slot number of the SD card to send the command to.
@param[in] ClockFreq The max clock frequency to be set. The unit is KHz.
- @param[in] Capability The capability of the slot.
+ @param[in] BaseClkFreq The base clock frequency of host controller in MHz.
@retval EFI_SUCCESS The clock is supplied successfully.
@retval Others The clock isn't supplied successfully.
@@ -732,11 +732,10 @@ SdMmcHcClockSupply ( IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT8 Slot,
IN UINT64 ClockFreq,
- IN SD_MMC_HC_SLOT_CAP Capability
+ IN UINT32 BaseClkFreq
)
{
EFI_STATUS Status;
- UINT32 BaseClkFreq;
UINT32 SettingFreq;
UINT32 Divisor;
UINT32 Remainder;
@@ -746,9 +745,8 @@ SdMmcHcClockSupply ( //
// Calculate a divisor for SD clock frequency
//
- ASSERT (Capability.BaseClkFreq != 0);
+ ASSERT (BaseClkFreq != 0);
- BaseClkFreq = Capability.BaseClkFreq;
if (ClockFreq == 0) {
return EFI_INVALID_PARAMETER;
}
@@ -940,7 +938,7 @@ SdMmcHcSetBusWidth ( @param[in] PciIo The PCI IO protocol instance.
@param[in] Slot The slot number of the SD card to send the command to.
- @param[in] Capability The capability of the slot.
+ @param[in] BaseClkFreq The base clock frequency of host controller in MHz.
@retval EFI_SUCCESS The clock is supplied successfully.
@retval Others The clock isn't supplied successfully.
@@ -950,16 +948,19 @@ EFI_STATUS SdMmcHcInitClockFreq (
IN EFI_PCI_IO_PROTOCOL *PciIo,
IN UINT8 Slot,
- IN SD_MMC_HC_SLOT_CAP Capability
+ IN UINT32 BaseClkFreq
)
{
EFI_STATUS Status;
UINT32 InitFreq;
//
- // Calculate a divisor for SD clock frequency
+ // According to SDHCI specification ver. 4.2, BaseClkFreq field value of
+ // the Capability Register 1 can be zero, which means a need for obtaining
+ // the clock frequency via another method. Fail in case it is not updated
+ // by SW at this point.
//
- if (Capability.BaseClkFreq == 0) {
+ if (BaseClkFreq == 0) {
//
// Don't support get Base Clock Frequency information via another method
//
@@ -969,7 +970,7 @@ SdMmcHcInitClockFreq ( // Supply 400KHz clock frequency at initialization phase.
//
InitFreq = 400;
- Status = SdMmcHcClockSupply (PciIo, Slot, InitFreq, Capability);
+ Status = SdMmcHcClockSupply (PciIo, Slot, InitFreq, BaseClkFreq);
return Status;
}
@@ -1103,7 +1104,7 @@ SdMmcHcInitHost ( PciIo = Private->PciIo;
Capability = Private->Capability[Slot];
- Status = SdMmcHcInitClockFreq (PciIo, Slot, Capability);
+ Status = SdMmcHcInitClockFreq (PciIo, Slot, Private->BaseClkFreq[Slot]);
if (EFI_ERROR (Status)) {
return Status;
}
|