path: root/UefiCpuPkg/CpuIo2Smm/CpuIo2Mm.c

/** @file
  Produces the SMM CPU I/O Protocol.

Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "CpuIo2Mm.h"

//
// Handle for the SMM CPU I/O Protocol
//
EFI_HANDLE  mHandle = NULL;

//
// SMM CPU I/O Protocol instance
//
EFI_SMM_CPU_IO2_PROTOCOL mSmmCpuIo2 = {
  {
    CpuMemoryServiceRead,
    CpuMemoryServiceWrite
  },
  {
    CpuIoServiceRead,
    CpuIoServiceWrite
  }
};

//
// Lookup table for increment values based on transfer widths
//
UINT8 mStride[] = {
  1, // SMM_IO_UINT8
  2, // SMM_IO_UINT16
  4, // SMM_IO_UINT32
  8  // SMM_IO_UINT64
};

/**
  Check parameters to a SMM CPU I/O Protocol service request.

  @param[in]  MmioOperation  TRUE for an MMIO operation, FALSE for I/O Port operation.
  @param[in]  Width          Signifies the width of the I/O operations.
  @param[in]  Address        The base address of the I/O operations.  The caller is
                             responsible for aligning the Address if required.
  @param[in]  Count          The number of I/O operations to perform.
  @param[in]  Buffer         For read operations, the destination buffer to store
                             the results.  For write operations, the source buffer
                             from which to write data.

  @retval EFI_SUCCESS            The data was read from or written to the device.
  @retval EFI_UNSUPPORTED        The Address is not valid for this system.
  @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.

**/
EFI_STATUS
CpuIoCheckParameter (
  IN BOOLEAN           MmioOperation,
  IN EFI_SMM_IO_WIDTH  Width,
  IN UINT64            Address,
  IN UINTN             Count,
  IN VOID              *Buffer
  )
{
  UINT64  MaxCount;
  UINT64  Limit;

  //
  // Check to see if Buffer is NULL
  //
  if (Buffer == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Check to see if Width is in the valid range
  //
  if ((UINT32)Width > SMM_IO_UINT64) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Check to see if Width is in the valid range for I/O Port operations
  //
  if (!MmioOperation && (Width == SMM_IO_UINT64)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Check to see if any address associated with this transfer exceeds the maximum
  // allowed address.  The maximum address implied by the parameters passed in is
  // Address + Size * Count.  If the following condition is met, then the transfer
  // is not supported.
  //
  //    Address + Size * Count > (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS) + 1
  //
  // Since MAX_ADDRESS can be the maximum integer value supported by the CPU and Count
  // can also be the maximum integer value supported by the CPU, this range
  // check must be adjusted to avoid all overflow conditions.
  //
  // The following form of the range check is equivalent but assumes that
  // MAX_ADDRESS and MAX_IO_PORT_ADDRESS are of the form (2^n - 1).
  //
  Limit = (MmioOperation ? MAX_ADDRESS : MAX_IO_PORT_ADDRESS);
  if (Count == 0) {
    if (Address > Limit) {
      return EFI_UNSUPPORTED;
    }
  } else {
    MaxCount = RShiftU64 (Limit, Width);
    if (MaxCount < (Count - 1)) {
      return EFI_UNSUPPORTED;
    }
    if (Address > LShiftU64 (MaxCount - Count + 1, Width)) {
      return EFI_UNSUPPORTED;
    }
  }

  //
  // Check to see if Address is aligned
  //
  if ((Address & ((UINT64)mStride[Width] - 1)) != 0) {
    return EFI_UNSUPPORTED;
  }

  return EFI_SUCCESS;
}

/**
  Reads memory-mapped registers.

  The I/O operations are carried out exactly as requested.  The caller is
  responsible for any alignment and I/O width issues that the bus, device,
  platform, or type of I/O might require.

  @param[in]  This     The EFI_SMM_CPU_IO2_PROTOCOL instance.
  @param[in]  Width    Signifies the width of the I/O operations.
  @param[in]  Address  The base address of the I/O operations.  The caller is
                       responsible for aligning the Address if required.
  @param[in]  Count    The number of I/O operations to perform.
  @param[out] Buffer   For read operations, the destination buffer to store
                       the results.  For write operations, the source buffer
                       from which to write data.

  @retval EFI_SUCCESS            The data was read from or written to the device.
  @retval EFI_UNSUPPORTED        The Address is not valid for this system.
  @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
  @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a
                                 lack of resources

**/
EFI_STATUS
EFIAPI
CpuMemoryServiceRead (
  IN  CONST EFI_SMM_CPU_IO2_PROTOCOL  *This,
  IN  EFI_SMM_IO_WIDTH                Width,
  IN  UINT64                          Address,
  IN  UINTN                           Count,
  OUT VOID                            *Buffer
  )
{
  EFI_STATUS  Status;
  UINT8       Stride;
  UINT8       *Uint8Buffer;

  Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Select loop based on the width of the transfer
  //
  Stride = mStride[Width];
  for (Uint8Buffer = Buffer; Count > 0; Address += Stride, Uint8Buffer += Stride, Count--) {
    if (Width == SMM_IO_UINT8) {
      *Uint8Buffer = MmioRead8 ((UINTN)Address);
    } else if (Width == SMM_IO_UINT16) {
      *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
    } else if (Width == SMM_IO_UINT32) {
      *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
    } else if (Width == SMM_IO_UINT64) {
      *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
    }
  }
  return EFI_SUCCESS;
}

/**
  Writes memory-mapped registers.

  The I/O operations are carried out exactly as requested.  The caller is
  responsible for any alignment and I/O width issues that the bus, device,
  platform, or type of I/O might require.

  @param[in]  This     The EFI_SMM_CPU_IO2_PROTOCOL instance.
  @param[in]  Width    Signifies the width of the I/O operations.
  @param[in]  Address  The base address of the I/O operations.  The caller is
                       responsible for aligning the Address if required.
  @param[in]  Count    The number of I/O operations to perform.
  @param[in]  Buffer   For read operations, the destination buffer to store
                       the results.  For write operations, the source buffer
                       from which to write data.

  @retval EFI_SUCCESS            The data was read from or written to the device.
  @retval EFI_UNSUPPORTED        The Address is not valid for this system.
  @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
  @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a
                                 lack of resources

**/
EFI_STATUS
EFIAPI
CpuMemoryServiceWrite (
  IN CONST EFI_SMM_CPU_IO2_PROTOCOL  *This,
  IN EFI_SMM_IO_WIDTH                Width,
  IN UINT64                          Address,
  IN UINTN                           Count,
  IN VOID                            *Buffer
  )
{
  EFI_STATUS  Status;
  UINT8       Stride;
  UINT8       *Uint8Buffer;

  Status = CpuIoCheckParameter (TRUE, Width, Address, Count, Buffer);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Select loop based on the width of the transfer
  //
  Stride = mStride[Width];
  for (Uint8Buffer = Buffer; Count > 0; Address += Stride, Uint8Buffer += Stride, Count--) {
    if (Width == SMM_IO_UINT8) {
      MmioWrite8 ((UINTN)Address, *Uint8Buffer);
    } else if (Width == SMM_IO_UINT16) {
      MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
    } else if (Width == SMM_IO_UINT32) {
      MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
    } else if (Width == SMM_IO_UINT64) {
      MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
    }
  }
  return EFI_SUCCESS;
}

/**
  Reads I/O registers.

  The I/O operations are carried out exactly as requested.  The caller is
  responsible for any alignment and I/O width issues that the bus, device,
  platform, or type of I/O might require.

  @param[in]  This     The EFI_SMM_CPU_IO2_PROTOCOL instance.
  @param[in]  Width    Signifies the width of the I/O operations.
  @param[in]  Address  The base address of the I/O operations.  The caller is
                       responsible for aligning the Address if required.
  @param[in]  Count    The number of I/O operations to perform.
  @param[out] Buffer   For read operations, the destination buffer to store
                       the results.  For write operations, the source buffer
                       from which to write data.

  @retval EFI_SUCCESS            The data was read from or written to the device.
  @retval EFI_UNSUPPORTED        The Address is not valid for this system.
  @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
  @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a
                                 lack of resources

**/
EFI_STATUS
EFIAPI
CpuIoServiceRead (
  IN  CONST EFI_SMM_CPU_IO2_PROTOCOL  *This,
  IN  EFI_SMM_IO_WIDTH                Width,
  IN  UINT64                          Address,
  IN  UINTN                           Count,
  OUT VOID                            *Buffer
  )
{
  EFI_STATUS  Status;
  UINT8       Stride;
  UINT8       *Uint8Buffer;

  Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Select loop based on the width of the transfer
  //
  Stride = mStride[Width];
  for (Uint8Buffer = Buffer; Count > 0; Address += Stride, Uint8Buffer += Stride, Count--) {
    if (Width == SMM_IO_UINT8) {
      *Uint8Buffer = IoRead8 ((UINTN)Address);
    } else if (Width == SMM_IO_UINT16) {
      *((UINT16 *)Uint8Buffer) = IoRead16 ((UINTN)Address);
    } else if (Width == SMM_IO_UINT32) {
      *((UINT32 *)Uint8Buffer) = IoRead32 ((UINTN)Address);
    }
  }

  return EFI_SUCCESS;
}

/**
  Write I/O registers.

  The I/O operations are carried out exactly as requested.  The caller is
  responsible for any alignment and I/O width issues that the bus, device,
  platform, or type of I/O might require.

  @param[in]  This     The EFI_SMM_CPU_IO2_PROTOCOL instance.
  @param[in]  Width    Signifies the width of the I/O operations.
  @param[in]  Address  The base address of the I/O operations.  The caller is
                       responsible for aligning the Address if required.
  @param[in]  Count    The number of I/O operations to perform.
  @param[in]  Buffer   For read operations, the destination buffer to store
                       the results.  For write operations, the source buffer
                       from which to write data.

  @retval EFI_SUCCESS            The data was read from or written to the device.
  @retval EFI_UNSUPPORTED        The Address is not valid for this system.
  @retval EFI_INVALID_PARAMETER  Width or Count, or both, were invalid.
  @retval EFI_OUT_OF_RESOURCES   The request could not be completed due to a
                                 lack of resources

**/
EFI_STATUS
EFIAPI
CpuIoServiceWrite (
  IN CONST EFI_SMM_CPU_IO2_PROTOCOL  *This,
  IN EFI_SMM_IO_WIDTH                Width,
  IN UINT64                          Address,
  IN UINTN                           Count,
  IN VOID                            *Buffer
  )
{
  EFI_STATUS  Status;
  UINT8       Stride;
  UINT8       *Uint8Buffer;

  //
  // Make sure the parameters are valid
  //
  Status = CpuIoCheckParameter (FALSE, Width, Address, Count, Buffer);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Select loop based on the width of the transfer
  //
  Stride = mStride[Width];
  for (Uint8Buffer = (UINT8 *)Buffer; Count > 0; Address += Stride, Uint8Buffer += Stride, Count--) {
    if (Width == SMM_IO_UINT8) {
      IoWrite8 ((UINTN)Address, *Uint8Buffer);
    } else if (Width == SMM_IO_UINT16) {
      IoWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
    } else if (Width == SMM_IO_UINT32) {
      IoWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
    }
  }

  return EFI_SUCCESS;
}

/**
  The module Entry Point SmmCpuIoProtocol driver

  @retval EFI_SUCCESS  The entry point is executed successfully.
  @retval Other        Some error occurs when executing this entry point.

**/
EFI_STATUS
CommonCpuIo2Initialize (
  VOID
  )
{
  EFI_STATUS  Status;

  //
  // Copy the SMM CPU I/O Protocol instance into the System Management System Table
  //
  CopyMem (&gMmst->MmIo, &mSmmCpuIo2, sizeof (mSmmCpuIo2));

  //
  // Install the SMM CPU I/O Protocol into the MM protocol database
  //
  Status = gMmst->MmInstallProtocolInterface (
                    &mHandle,
                    &gEfiSmmCpuIo2ProtocolGuid,
                    EFI_NATIVE_INTERFACE,
                    &mSmmCpuIo2
                    );
  ASSERT_EFI_ERROR (Status);

  return Status;
}