diff options
Diffstat (limited to 'flashrom.8.tmpl')
-rw-r--r-- | flashrom.8.tmpl | 15 |
1 files changed, 8 insertions, 7 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index b3d44636b..362b14a79 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -427,7 +427,7 @@ bitbanging adapter) .sp .BR "* realtek_mst_i2c_spi" " (for SPI flash ROMs attached to Realtek DisplayPort hubs accessible through I2C)" .sp -.BR "* lspcon_i2c_spi" " (for SPI flash ROMs attached to Parade Technologies LSPCONs)" +.BR "* parade_lspcon" " (for SPI flash ROMs attached to Parade Technologies LSPCONs (PS175))" .sp Some programmers have optional or mandatory parameters which are described in detail in the @@ -1521,7 +1521,7 @@ syntax where \fBfrequency\fP is the SPI clock frequency in kHz. If the passed frequency is not supported by the adapter the nearest lower supported frequency will be used. .SS -.BR "realtek_mst_i2c_spi " and " lspcon_i2c_spi " programmers +.BR "realtek_mst_i2c_spi " and " parade_lspcon " programmers .IP These programmers tunnel SPI commands through I2C-connected devices. The I2C bus over which communication occurs must be specified either by device path @@ -1532,7 +1532,7 @@ with the \fBdevpath\fP option: or by a bus number with the \fBbus\fP option, which implies a device path like /dev/i2c-N where N is the specified bus number: .sp -.B " flashrom \-p lspcon_i2c_spi:bus=8" +.B " flashrom \-p parade_lspcon:bus=8" .SS .BR "realtek_mst_i2c_spi " programmer @@ -1565,11 +1565,12 @@ flash): .br .B " flashrom -p realtek_mst_i2c_spi:bus=0,enter-isp=0,reset-mcu=1 -w new.bin" .SS -.BR "lspcon_i2c_spi " programmer +.BR "parade_lspcon " programmer .IP This programmer supports SPI flash programming for chips attached to Parade -Technologies DisplayPort-to-HDMI level shifter/protocol converters (LSPCONs). -Communication to the SPI flash is tunneled through the LSPCON over I2C. +Technologies DisplayPort-to-HDMI level shifter/protocol converters (LSPCONs), +e.g. the PS175. Communication to the SPI flash is tunneled through the LSPCON +over I2C. .SH EXAMPLES To back up and update your BIOS, run @@ -1651,7 +1652,7 @@ permissions are set. .B ogp needs PCI configuration space read access and raw memory access. .sp -.BR realtek_mst_i2c_spi " and " lspcon_i2c_spi +.BR realtek_mst_i2c_spi " and " parade_lspcon need userspace access to the selected I2C bus. .sp On OpenBSD, you can obtain raw access permission by setting |