Merge branch 'pci/enumeration'

- Tone down message about missing optional MCFG (Jeremy Linton)

- Add schedule point in pci_read_config() (Jiang Biao)

- Add Ampere Altra SOC MCFG quirk (Tuan Phan)

- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

* pci/enumeration:
  PCI: Add Kconfig options for MPS/MRRS strategy
  PCI/ACPI: Add Ampere Altra SOC MCFG quirk
  PCI: Add schedule point in pci_read_config()
  PCI/ACPI: Tone down missing MCFG message

6 files changed, 107 insertions, 1 deletions

diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index 54b36b7ad47d..7ddd57abadd1 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -142,6 +142,26 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	XGENE_V2_ECAM_MCFG(4, 0),
 	XGENE_V2_ECAM_MCFG(4, 1),
 	XGENE_V2_ECAM_MCFG(4, 2),
+
+#define ALTRA_ECAM_QUIRK(rev, seg) \
+	{ "Ampere", "Altra   ", rev, seg, MCFG_BUS_ANY, &pci_32b_read_ops }
+
+	ALTRA_ECAM_QUIRK(1, 0),
+	ALTRA_ECAM_QUIRK(1, 1),
+	ALTRA_ECAM_QUIRK(1, 2),
+	ALTRA_ECAM_QUIRK(1, 3),
+	ALTRA_ECAM_QUIRK(1, 4),
+	ALTRA_ECAM_QUIRK(1, 5),
+	ALTRA_ECAM_QUIRK(1, 6),
+	ALTRA_ECAM_QUIRK(1, 7),
+	ALTRA_ECAM_QUIRK(1, 8),
+	ALTRA_ECAM_QUIRK(1, 9),
+	ALTRA_ECAM_QUIRK(1, 10),
+	ALTRA_ECAM_QUIRK(1, 11),
+	ALTRA_ECAM_QUIRK(1, 12),
+	ALTRA_ECAM_QUIRK(1, 13),
+	ALTRA_ECAM_QUIRK(1, 14),
+	ALTRA_ECAM_QUIRK(1, 15),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
@@ -280,5 +300,5 @@ void __init pci_mmcfg_late_init(void)
 {
 	int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse);
 	if (err)
-		pr_err("Failed to parse MCFG (%d)\n", err);
+		pr_debug("Failed to parse MCFG (%d)\n", err);
 }
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 4bef5c2bae9f..d323b25ae27e 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -187,6 +187,68 @@ config PCI_HYPERV
 	  The PCI device frontend driver allows the kernel to import arbitrary
 	  PCI devices from a PCI backend to support PCI driver domains.
 
+choice
+	prompt "PCI Express hierarchy optimization setting"
+	default PCIE_BUS_DEFAULT
+	depends on PCI && EXPERT
+	help
+	  MPS (Max Payload Size) and MRRS (Max Read Request Size) are PCIe
+	  device parameters that affect performance and the ability to
+	  support hotplug and peer-to-peer DMA.
+
+	  The following choices set the MPS and MRRS optimization strategy
+	  at compile-time.  The choices are the same as those offered for
+	  the kernel command-line parameter 'pci', i.e.,
+	  'pci=pcie_bus_tune_off', 'pci=pcie_bus_safe',
+	  'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'.
+
+	  This is a compile-time setting and can be overridden by the above
+	  command-line parameters.  If unsure, choose PCIE_BUS_DEFAULT.
+
+config PCIE_BUS_TUNE_OFF
+	bool "Tune Off"
+	depends on PCI
+	help
+	  Use the BIOS defaults; don't touch MPS at all.  This is the same
+	  as booting with 'pci=pcie_bus_tune_off'.
+
+config PCIE_BUS_DEFAULT
+	bool "Default"
+	depends on PCI
+	help
+	  Default choice; ensure that the MPS matches upstream bridge.
+
+config PCIE_BUS_SAFE
+	bool "Safe"
+	depends on PCI
+	help
+	  Use largest MPS that boot-time devices support.  If you have a
+	  closed system with no possibility of adding new devices, this
+	  will use the largest MPS that's supported by all devices.  This
+	  is the same as booting with 'pci=pcie_bus_safe'.
+
+config PCIE_BUS_PERFORMANCE
+	bool "Performance"
+	depends on PCI
+	help
+	  Use MPS and MRRS for best performance.  Ensure that a given
+	  device's MPS is no larger than its parent MPS, which allows us to
+	  keep all switches/bridges to the max MPS supported by their
+	  parent.  This is the same as booting with 'pci=pcie_bus_perf'.
+
+config PCIE_BUS_PEER2PEER
+	bool "Peer2peer"
+	depends on PCI
+	help
+	  Set MPS = 128 for all devices.  MPS configuration effected by the
+	  other options could cause the MPS on one root port to be
+	  different than that of the MPS on another, which may cause
+	  hot-added devices or peer-to-peer DMA to fail.  Set MPS to the
+	  smallest possible value (128B) system-wide to avoid these issues.
+	  This is the same as booting with 'pci=pcie_bus_peer2peer'.
+
+endchoice
+
 source "drivers/pci/hotplug/Kconfig"
 source "drivers/pci/controller/Kconfig"
 source "drivers/pci/endpoint/Kconfig"
diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c
index 8f065a42fc1a..b54d32a31669 100644
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -168,4 +168,14 @@ const struct pci_ecam_ops pci_32b_ops = {
 		.write		= pci_generic_config_write32,
 	}
 };
+
+/* ECAM ops for 32-bit read only (non-compliant) */
+const struct pci_ecam_ops pci_32b_read_ops = {
+	.bus_shift	= 20,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= pci_generic_config_read32,
+		.write		= pci_generic_config_write,
+	}
+};
 #endif
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 6d78df981d41..3b9f63d3cad6 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -708,6 +708,7 @@ static ssize_t pci_read_config(struct file *filp, struct kobject *kobj,
 		data[off - init_off + 3] = (val >> 24) & 0xff;
 		off += 4;
 		size -= 4;
+		cond_resched();
 	}
 
 	if (size >= 2) {
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8b649b01aad3..f3f64016fe32 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -101,7 +101,19 @@ unsigned long pci_hotplug_mmio_pref_size = DEFAULT_HOTPLUG_MMIO_PREF_SIZE;
 #define DEFAULT_HOTPLUG_BUS_SIZE	1
 unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
 
+
+/* PCIe MPS/MRRS strategy; can be overridden by kernel command-line param */
+#ifdef CONFIG_PCIE_BUS_TUNE_OFF
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
+#elif defined CONFIG_PCIE_BUS_SAFE
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE;
+#elif defined CONFIG_PCIE_BUS_PERFORMANCE
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PERFORMANCE;
+#elif defined CONFIG_PCIE_BUS_PEER2PEER
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PEER2PEER;
+#else
 enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;
+#endif
 
 /*
  * The default CLS is used if arch didn't set CLS explicitly and not
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index 1af5cb02ef7f..033ce74f02e8 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -51,6 +51,7 @@ extern const struct pci_ecam_ops pci_generic_ecam_ops;
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern const struct pci_ecam_ops pci_32b_ops;	/* 32-bit accesses only */
+extern const struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */
 extern const struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 extern const struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
 extern const struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */